MeshCore/src/helpers/ESP32Board.h
2025-03-11 09:11:14 +01:00

104 lines
2.1 KiB
C++

#pragma once
#include <MeshCore.h>
#include <Arduino.h>
#if defined(ESP_PLATFORM)
#include <rom/rtc.h>
#include <sys/time.h>
class ESP32Board : public mesh::MainBoard {
protected:
uint8_t startup_reason;
public:
void begin() {
// for future use, sub-classes SHOULD call this from their begin()
startup_reason = BD_STARTUP_NORMAL;
#ifdef ESP32_CPU_FREQ
setCpuFrequencyMhz(ESP32_CPU_FREQ);
#endif
#ifdef PIN_VBAT_READ
// battery read support
pinMode(PIN_VBAT_READ, INPUT);
adcAttachPin(PIN_VBAT_READ);
#endif
#ifdef P_LORA_TX_LED
pinMode(P_LORA_TX_LED, OUTPUT);
digitalWrite(P_LORA_TX_LED, LOW);
#endif
#if defined(PIN_BOARD_SDA) && defined(PIN_BOARD_SCL)
Wire.begin(PIN_BOARD_SDA, PIN_BOARD_SCL);
#else
Wire.begin();
#endif
}
uint8_t getStartupReason() const override { return startup_reason; }
#if defined(P_LORA_TX_LED)
void onBeforeTransmit() override {
digitalWrite(P_LORA_TX_LED, HIGH); // turn TX LED on
}
void onAfterTransmit() override {
digitalWrite(P_LORA_TX_LED, LOW); // turn TX LED off
}
#endif
uint16_t getBattMilliVolts() override {
#ifdef PIN_VBAT_READ
analogReadResolution(12);
uint32_t raw = 0;
for (int i = 0; i < 4; i++) {
raw += analogReadMilliVolts(PIN_VBAT_READ);
}
raw = raw / 4;
return (2 * raw);
#else
return 0; // not supported
#endif
}
const char* getManufacturerName() const override {
return "Generic ESP32";
}
void reboot() override {
esp_restart();
}
};
class ESP32RTCClock : public mesh::RTCClock {
public:
ESP32RTCClock() { }
void begin() {
esp_reset_reason_t reason = esp_reset_reason();
if (reason == ESP_RST_POWERON) {
// start with some date/time in the recent past
struct timeval tv;
tv.tv_sec = 1715770351; // 15 May 2024, 8:50pm
tv.tv_usec = 0;
settimeofday(&tv, NULL);
}
}
uint32_t getCurrentTime() override {
time_t _now;
time(&_now);
return _now;
}
void setCurrentTime(uint32_t time) override {
struct timeval tv;
tv.tv_sec = time;
tv.tv_usec = 0;
settimeofday(&tv, NULL);
}
};
#endif