mirror of
https://github.com/meshcore-dev/MeshCore.git
synced 2026-04-20 22:13:47 +00:00
bed311313a
Adds a new variant 'ikoka_stick_nrf' and associated support files. This is based on the Xiao nRF54 code with pin numbers and functions changed to suit the differences in hardware between the WIO SX1262 board and the Ikoka Stick. Sets the default LoRa transmit power to 9dBm to avoid burning up the frontend in Ikoka Sticks equipped with the Ebyte 33dBm S22 module on first boot. Adds support for an SSD1306 display connected to the display header. Note the display pinout is the same as the RAK4631 display header so make sure to use a display wired accordingly (aliexpress etc. SSD1306s typically have Vcc & GND reversed from what this board expects). Adds support for display rotation to SSD1306Display via a platformIO define. This support was added following the same paradigms found elsewhere in the code for rotating a display.
26 lines
785 B
C
26 lines
785 B
C
#pragma once
|
|
|
|
#define RADIOLIB_STATIC_ONLY 1
|
|
#include <RadioLib.h>
|
|
#include <helpers/radiolib/RadioLibWrappers.h>
|
|
#include <ikoka_stick_nrf_board.h>
|
|
#include <helpers/radiolib/CustomSX1262Wrapper.h>
|
|
#include <helpers/AutoDiscoverRTCClock.h>
|
|
#include <helpers/ArduinoHelpers.h>
|
|
#include <helpers/sensors/EnvironmentSensorManager.h>
|
|
|
|
#ifdef DISPLAY_CLASS
|
|
#include <helpers/ui/SSD1306Display.h>
|
|
extern DISPLAY_CLASS display;
|
|
#endif
|
|
|
|
extern ikoka_stick_nrf_board board;
|
|
extern WRAPPER_CLASS radio_driver;
|
|
extern AutoDiscoverRTCClock rtc_clock;
|
|
extern EnvironmentSensorManager sensors;
|
|
|
|
bool radio_init();
|
|
uint32_t radio_get_rng_seed();
|
|
void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
|
|
void radio_set_tx_power(uint8_t dbm);
|
|
mesh::LocalIdentity radio_new_identity();
|