mirror of
https://github.com/meshcore-dev/MeshCore.git
synced 2026-04-20 22:13:47 +00:00
218b96e4aa
There is a lot to this PR, so if there are any questions let me know. The idea here is to merge T-Beam fw so that there is less redundant code. Most versions (except the 0.7) share PMU code, init sequence, and most IO pin definitions. - Merged all T-Beam board.h files into one TBeamBoard. - Added PMU code to identify different AXP chips. - Modified "lilygo tbeam SX1276" variant to cover all T-Beam SX1276 versions - Modified "lilygo tbeam SX1262" variant to cover all T-Beam SX1262 versions - Enabled GPS on all T-Beam versions/models - Enabled BME280 on the Supreme I am also updating EnvironmentSensorManager to allow for boards that do or don't have GPS enable pins, as well as a PERSISTANT_GPS define check for boards that want GPS to stay active after boot.
164 lines
4.6 KiB
C++
164 lines
4.6 KiB
C++
#pragma once
|
|
|
|
#include <Wire.h>
|
|
#include <Arduino.h>
|
|
#include "XPowersLib.h"
|
|
#include "helpers/ESP32Board.h"
|
|
#include <driver/rtc_io.h>
|
|
//#include <RadioLib.h>
|
|
//#include <helpers/RadioLibWrappers.h>
|
|
//#include <helpers/CustomSX1262Wrapper.h>
|
|
//#include <helpers/CustomSX1276Wrapper.h>
|
|
|
|
#ifdef TBEAM_SUPREME_SX1262
|
|
// LoRa radio module pins for TBeam S3 Supreme SX1262
|
|
#define P_LORA_DIO_0 -1 //NC
|
|
#define P_LORA_DIO_1 1 //SX1262 IRQ pin
|
|
#define P_LORA_NSS 10 //SX1262 SS pin
|
|
#define P_LORA_RESET 5 //SX1262 Rest pin
|
|
#define P_LORA_BUSY 4 //SX1262 Busy pin
|
|
#define P_LORA_SCLK 12 //SX1262 SCLK pin
|
|
#define P_LORA_MISO 13 //SX1262 MISO pin
|
|
#define P_LORA_MOSI 11 //SX1262 MOSI pin
|
|
|
|
#define PIN_BOARD_SDA1 42 //SDA for PMU and PFC8563 (RTC)
|
|
#define PIN_BOARD_SCL1 41 //SCL for PMU and PFC8563 (RTC)
|
|
|
|
#define PIN_PMU_IRQ 40 //IRQ pin for PMU
|
|
|
|
// #define PIN_GPS_RX 9
|
|
// #define PIN_GPS_TX 8
|
|
// #define PIN_GPS_EN 7
|
|
|
|
#define P_BOARD_SPI_MOSI 35 //SPI for SD Card and QMI8653 (IMU)
|
|
#define P_BOARD_SPI_MISO 37 //SPI for SD Card and QMI8653 (IMU)
|
|
#define P_BOARD_SPI_SCK 36 //SPI for SD Card and QMI8653 (IMU)
|
|
#define P_BPARD_SPI_CS 47 //Pin for SD Card CS
|
|
#define P_BOARD_IMU_CS 34 //Pin for QMI8653 (IMU) CS
|
|
|
|
#define P_BOARD_IMU_INT 33 //IMU Int pin
|
|
#define P_BOARD_RTC_INT 14 //RTC Int pin
|
|
|
|
//I2C Wire addresses
|
|
#define I2C_BME280_ADD 0x76 //BME280 sensor I2C address on Wire
|
|
#define I2C_OLED_ADD 0x3C //SH1106 OLED I2C address on Wire
|
|
#define I2C_QMC6310U_ADD 0x1C //QMC6310U mag sensor I2C address on Wire
|
|
|
|
//I2C Wire1 addresses
|
|
#define I2C_RTC_ADD 0x51 //RTC I2C address on Wire1
|
|
#define I2C_PMU_ADD 0x34 //AXP2101 I2C address on Wire1
|
|
|
|
#define PMU_WIRE_PORT Wire1
|
|
#define RTC_WIRE_PORT Wire1
|
|
#endif
|
|
|
|
#ifdef TBEAM_SX1262
|
|
#define P_LORA_BUSY 32
|
|
#endif
|
|
|
|
#ifdef TBEAM_SX1276
|
|
#define P_LORA_DIO_2 32
|
|
#define P_LORA_BUSY RADIOLIB_NC
|
|
#endif
|
|
|
|
#if defined(TBEAM_SX1262) || defined(TBEAM_SX1276)
|
|
// LoRa radio module pins for TBeam
|
|
// uint32_t P_LORA_BUSY = 0; //shared, so define at run
|
|
// uint32_t P_LORA_DIO_2 = 0; //SX1276 only, so define at run
|
|
|
|
#define P_LORA_DIO_0 26
|
|
#define P_LORA_DIO_1 33
|
|
#define P_LORA_NSS 18
|
|
#define P_LORA_RESET 23
|
|
#define P_LORA_SCLK 5
|
|
#define P_LORA_MISO 19
|
|
#define P_LORA_MOSI 27
|
|
|
|
// #define PIN_GPS_RX 34
|
|
// #define PIN_GPS_TX 12
|
|
|
|
#define PIN_PMU_IRQ 35
|
|
#define PMU_WIRE_PORT Wire
|
|
#define RTC_WIRE_PORT Wire
|
|
#define I2C_PMU_ADD 0x34
|
|
#endif
|
|
|
|
// enum RadioType {
|
|
// SX1262,
|
|
// SX1276
|
|
// };
|
|
|
|
class TBeamBoard : public ESP32Board {
|
|
XPowersLibInterface *PMU = NULL;
|
|
//PhysicalLayer * pl;
|
|
//RadioType * radio = NULL;
|
|
// int radioVersions = 2;
|
|
|
|
enum {
|
|
POWERMANAGE_ONLINE = _BV(0),
|
|
DISPLAY_ONLINE = _BV(1),
|
|
RADIO_ONLINE = _BV(2),
|
|
GPS_ONLINE = _BV(3),
|
|
PSRAM_ONLINE = _BV(4),
|
|
SDCARD_ONLINE = _BV(5),
|
|
AXDL345_ONLINE = _BV(6),
|
|
BME280_ONLINE = _BV(7),
|
|
BMP280_ONLINE = _BV(8),
|
|
BME680_ONLINE = _BV(9),
|
|
QMC6310_ONLINE = _BV(10),
|
|
QMI8658_ONLINE = _BV(11),
|
|
PCF8563_ONLINE = _BV(12),
|
|
OSC32768_ONLINE = _BV(13),
|
|
};
|
|
|
|
bool power_init();
|
|
//void radiotype_detect();
|
|
|
|
public:
|
|
|
|
#ifdef MESH_DEBUG
|
|
void printPMU();
|
|
void scanDevices(TwoWire *w);
|
|
#endif
|
|
void begin();
|
|
|
|
#ifndef TBEAM_SUPREME_SX1262
|
|
void onBeforeTransmit() override{
|
|
digitalWrite(P_LORA_TX_LED, LOW); // turn TX LED on - invert pin for SX1276
|
|
}
|
|
void onAfterTransmit() override{
|
|
digitalWrite(P_LORA_TX_LED, HIGH); // turn TX LED off - invert pin for SX1276
|
|
}
|
|
#endif
|
|
|
|
void enterDeepSleep(uint32_t secs, int pin_wake_btn) {
|
|
esp_sleep_pd_config(ESP_PD_DOMAIN_RTC_PERIPH, ESP_PD_OPTION_ON);
|
|
|
|
// Make sure the DIO1 and NSS GPIOs are hold on required levels during deep sleep
|
|
rtc_gpio_set_direction((gpio_num_t)P_LORA_DIO_1, RTC_GPIO_MODE_INPUT_ONLY);
|
|
rtc_gpio_pulldown_en((gpio_num_t)P_LORA_DIO_1);
|
|
|
|
rtc_gpio_hold_en((gpio_num_t)P_LORA_NSS);
|
|
|
|
if (pin_wake_btn < 0) {
|
|
esp_sleep_enable_ext1_wakeup( (1L << P_LORA_DIO_1), ESP_EXT1_WAKEUP_ANY_HIGH); // wake up on: recv LoRa packet
|
|
} else {
|
|
esp_sleep_enable_ext1_wakeup( (1L << P_LORA_DIO_1) | (1L << pin_wake_btn), ESP_EXT1_WAKEUP_ANY_HIGH); // wake up on: recv LoRa packet OR wake btn
|
|
}
|
|
|
|
if (secs > 0) {
|
|
esp_sleep_enable_timer_wakeup(secs * 1000000);
|
|
}
|
|
|
|
// Finally set ESP32 into sleep
|
|
esp_deep_sleep_start(); // CPU halts here and never returns!
|
|
}
|
|
|
|
uint16_t getBattMilliVolts(){
|
|
return PMU->getBattVoltage();
|
|
}
|
|
|
|
const char* getManufacturerName() const{
|
|
return "LilyGo T-Beam";
|
|
}
|
|
};
|