mirror of
https://github.com/meshcore-dev/MeshCore.git
synced 2026-04-20 22:13:47 +00:00
4636ce59e4
- Guard LED prefs read for backward compatibility with older prefs files - Gate BLE disconnect LED update on _isEnabled to prevent stale state - Replace hardcoded LED pins with P_LORA_TX_LED macro - Fix inaccurate comment in WioWM1110 board init
37 lines
1 KiB
C++
37 lines
1 KiB
C++
#include <Arduino.h>
|
|
#include <Wire.h>
|
|
|
|
#include "ThinkNodeM1Board.h"
|
|
|
|
#ifdef THINKNODE_M1
|
|
|
|
void ThinkNodeM1Board::begin() {
|
|
NRF52Board::begin();
|
|
|
|
Wire.begin();
|
|
|
|
pinMode(SX126X_POWER_EN, OUTPUT);
|
|
digitalWrite(SX126X_POWER_EN, HIGH);
|
|
delay(10); // give sx1262 some time to power up
|
|
|
|
// Start LEDs with defaults; prefs are applied after loadPrefs()
|
|
// LED_GREEN is active-LOW (LED_STATE_ON=LOW), P_LORA_TX_LED is active-HIGH
|
|
static LEDManager _ledManager(LED_GREEN, P_LORA_TX_LED, false, true);
|
|
ledManager = &_ledManager;
|
|
ledManager->begin(LED_STATUS_BOOT_30S, LED_ACTIVITY_BOTH);
|
|
}
|
|
|
|
uint16_t ThinkNodeM1Board::getBattMilliVolts() {
|
|
int adcvalue = 0;
|
|
|
|
analogReference(AR_INTERNAL_3_0);
|
|
analogReadResolution(12);
|
|
delay(10);
|
|
|
|
// ADC range is 0..3000mV and resolution is 12-bit (0..4095)
|
|
adcvalue = analogRead(PIN_VBAT_READ);
|
|
// Convert the raw value to compensated mv, taking the resistor-
|
|
// divider into account (providing the actual LIPO voltage)
|
|
return (uint16_t)((float)adcvalue * REAL_VBAT_MV_PER_LSB);
|
|
}
|
|
#endif
|