mirror of
https://github.com/meshcore-dev/MeshCore.git
synced 2026-04-20 22:13:47 +00:00
bed311313a
Adds a new variant 'ikoka_stick_nrf' and associated support files. This is based on the Xiao nRF54 code with pin numbers and functions changed to suit the differences in hardware between the WIO SX1262 board and the Ikoka Stick. Sets the default LoRa transmit power to 9dBm to avoid burning up the frontend in Ikoka Sticks equipped with the Ebyte 33dBm S22 module on first boot. Adds support for an SSD1306 display connected to the display header. Note the display pinout is the same as the RAK4631 display header so make sure to use a display wired accordingly (aliexpress etc. SSD1306s typically have Vcc & GND reversed from what this board expects). Adds support for display rotation to SSD1306Display via a platformIO define. This support was added following the same paradigms found elsewhere in the code for rotating a display. |
||
|---|---|---|
| .. | ||
| helpers | ||
| Dispatcher.cpp | ||
| Dispatcher.h | ||
| Identity.cpp | ||
| Identity.h | ||
| Mesh.cpp | ||
| Mesh.h | ||
| MeshCore.h | ||
| Packet.cpp | ||
| Packet.h | ||
| Utils.cpp | ||
| Utils.h | ||