2457 commits

This branch

This branch

All branches

Author	SHA1	Message	Date
Liam Cottle	6b52fb3230	Merge pull request #1310 from LitBomb/patch-22 ... fix Station G2 output dBm typo	2026-01-03 19:39:31 +13:00
uncle lit	a93527a474	fix Station G2 output dBm typo ... fix Station G2 output dBm typo reported on https://github.com/meshcore-dev/MeshCore/issues/1304 changed 26.5 dBm to 36.5 dBm	2026-01-02 22:34:10 -08:00
liamcottle	71bb49e556	remove use of dynamic allocation	2026-01-03 16:36:19 +13:00
liamcottle	ed263b0727	implement frame header parising for wifi interface	2026-01-03 15:39:57 +13:00
Scott Powell	3af25495bb	* Repeater: new anon request sub-type: ANON_REQ_TYPE_REGIONS (rate limited to max 4 every 3 mins) ... * Companion: new CMD_SEND_ANON_REQ command (reply with existing RESP_CODE_SENT frame)	2026-01-03 12:02:15 +11:00
ripplebiz	e31c46ff56	Merge pull request #1294 from liquidraver/factorynvsreset ... Add NVS partition reset to ESP factory reset	2026-01-03 11:57:14 +11:00
liquidraver	faf177de46	ESP factory reset clear NVS too	2026-01-02 08:37:22 +01:00
Scott Powell	813e502970	* added protocol_guide doc	2026-01-02 12:54:57 +11:00
ripplebiz	2f5a8c59ea	Merge pull request #1299 from entr0p1/companion-timestamp-fix ... BUGFIX: Companion packet timestamp mismatch trips replay protection	2026-01-02 12:44:45 +11:00
Frieder Schrempf	ab7935142c	EnvironmentSensorManager.cpp: Cleanup after failed RAK4631 GPS detection ... If no GPS was detected, revert the hardware to the initial state, otherwise we may see conflicts or increased power consumption on some boards. Signed-off-by: Frieder Schrempf <frieder@fris.de>	2025-12-31 14:42:42 +01:00
Frieder Schrempf	e79ee11872	EnvironmentSensorManager.cpp: Fix RAK4631 serial GPS detection ... Serial1 is always true. If we want to check for the presence of a GPS receiver, we need to check if any data was received. Signed-off-by: Frieder Schrempf <frieder@fris.de>	2025-12-31 14:42:41 +01:00
Liam Cottle	84b84717cc	Merge pull request #1293 from weebl2000/gitignorevenv ... Add common venv dirs to .gitignore	2026-01-01 01:29:55 +13:00
Wessel Nieboer	7ea751d3a0	Add venv dirs to .gitignore	2025-12-31 13:01:56 +01:00
ripplebiz	f9720f0b0c	Merge pull request #1266 from IoTThinks/MCdev-Powersaving-for-esp32-202512 ... Added powersaving to all ESP32 boards with RTC-supported DIO1	2025-12-31 11:35:46 +11:00
entr0p1	4a869163b2	BUGFIX: replay protection on repeaters tripped by timestamp sent from companion node mobile app. Send the node's RTC timestamp for TXT_TYPE_CLI_DATA messages instead of the timestamp from the app (matches the sendRequest() code logic).	2025-12-30 21:58:59 +11:00
Kevin Le	d911a34eeb	Used esp_wifi_get_mode instead of WiFi.getMode() to reduce the code size	2025-12-29 22:38:05 +07:00
Kevin Le	33b1e7edb9	Added pad after powersaving_enabled	2025-12-29 21:49:13 +07:00
ripplebiz	8edbb085fb	Merge pull request #1254 from entr0p1/tx-led-fix-v2 ... Fix TX LED stuck on when StartTransmit() fails	2025-12-29 16:09:08 +11:00
ripplebiz	1c594d4cbd	Merge pull request #1274 from IoTThinks/MCdev-FixedMCUTemperature ... To fix MCU Temperature for repeaters	2025-12-29 15:05:31 +11:00
ripplebiz	9b08a9bd93	Merge pull request #1260 from LitBomb/patch-21 ... Update FAQ with new community projects and tx power settings for amped radios	2025-12-29 13:44:38 +11:00
ripplebiz	1d9d37c654	Merge pull request #1247 from entr0p1/dev ... Fixed T1000-E temperature, lux and BME280 sensor reading accuracies	2025-12-29 12:42:05 +11:00
Liam Cottle	3d6e523ec8	Merge pull request #1281 from Meshcore-Portugal/jbrazio/promicro_rs232 ... Add RS232 bridge environment configuration for ProMicro	2025-12-29 12:57:00 +13:00
João Brázio	992d971f07	Add RS232 bridge environment configuration for ProMicro	2025-12-28 20:04:57 +00:00
Scott Powell	90d1e87ba1	* check for 'early receive' ACK	2025-12-27 20:46:28 +11:00
Kevin Le	0b30d2433f	To get and average the temperature so it is more accurate, especially in low temperature	2025-12-27 15:25:21 +07:00
Kevin Le	26321162ee	To fix the default temperature to be overridden by external sensors (if any)	2025-12-27 15:23:23 +07:00
Kevin Le	def1902688	Fixed T-Beam board to work with sleep	2025-12-24 12:04:39 +07:00
Kevin Le	0d11a02e71	Added extra check for P_LORA_DIO_1 before going to sleep	2025-12-24 11:47:19 +07:00
Kevin Le	89a289eb22	Added powersaving_enabled sanitization ... Moved powersaving_enabled to match serialization order	2025-12-24 11:23:19 +07:00
Kevin Le	1706f759b7	Modified hasPendingWork to return bool	2025-12-24 11:00:34 +07:00
Kevin Le	5c6c15942b	Added powersaving to all ESP32 boards with RTC-supported DIO1 ... Added CLI to enable/disable powersaving	2025-12-23 12:48:08 +07:00
uncle lit	27c92d2fe9	Update FAQ with new MeshCore applications and tx power settings for amped radios ... Added entries for meshcore-pi and pyMC_Repeater to the FAQ Added tx power settings for amped radios	2025-12-21 21:48:56 -08:00
entr0p1	245a818085	Fix TX LED stuck on when StartTransmit() fails	2025-12-20 23:15:41 +11:00
entr0p1	cc28b1a34d	EnvironmentSensorManager.cpp: Mitigate BME280 self-heating causing inaccurate readings.	2025-12-20 21:51:51 +11:00
entr0p1	6c993827de	Fixed T1000-E temperature and lux sensors	2025-12-19 23:51:36 +11:00
Liam Cottle	0c3fb918b2	Merge pull request #1203 from liquidraver/fix-gps-popup ... Fix GPS/Buzzer toggle UI popup	2025-12-18 21:39:25 +13:00
liquidraver	e855706abb	move showalert after saveprefs	2025-12-17 21:27:22 +01:00
fdlamotte	2ddd5ca0c3	Merge pull request #1235 from liquidraver/btfixv7 ... queue throttling + slave latency and minor refactor	2025-12-17 15:08:20 +01:00
liquidraver	cba29ea50c	queue throttling + slave latency and minor refactor	2025-12-17 13:46:58 +01:00
fdlamotte	9b13106b6f	Merge pull request #1201 from fschrempf/nrf52-board-deduplication ... NRF52 Board Code Deduplication	2025-12-17 11:29:33 +01:00
Frieder Schrempf	8eb229bcf8	variants: RAK4631: Enable DC/DC regulator to reduce power consumption ... The RAK4631/RAK4630 module are able to use the DC/DC converter. Enable it to reduce power consumption. Signed-off-by: Frieder Schrempf <frieder@fris.de>	2025-12-17 10:39:55 +01:00
Frieder Schrempf	22b1585959	NRF52Board.h: Mark getMCUTemperature() as virtual ... The function in the derived class is virtual per definition. Mark it to make this clearer to the reader. Signed-off-by: Frieder Schrempf <frieder@fris.de>	2025-12-17 10:39:54 +01:00
Frieder Schrempf	b024b9e1a1	Deduplicate NRF52 startOTAUpdate() ... The startOTAUpdate() is the same for all NRF52 boards. Use a common implementation for all boards that currently have a specific implementation. The following boards currently have an empty startOTAUpdate() for whatever reasons and therefore are not inheriting NRF52BoardOTA to keep the same state: Nano G2 Ultra, Seeed SenseCAP T1000-E, Wio WM1110. Signed-off-by: Frieder Schrempf <frieder@fris.de>	2025-12-17 10:30:50 +01:00
Frieder Schrempf	e3bb225efb	Deduplicate DC/DC regulator enable for NRF52 boards ... Some NRF52 boards are able to use the internal power-efficient DC/DC regulator. Add a new class that can be inherited by board classes to enable this feature and reduce the power consumption. Signed-off-by: Frieder Schrempf <frieder@fris.de>	2025-12-17 10:29:14 +01:00
Frieder Schrempf	93d1560d14	Use common NRF52 begin() and deduplicate() startup reason init ... Use a common begin() method that can be called from derived classes to contain the shared initialization code. Signed-off-by: Frieder Schrempf <frieder@fris.de>	2025-12-17 10:26:57 +01:00
Frieder Schrempf	87b0e432bb	Deduplicate reboot() for NRF52 boards ... The reboot() method is the same for all NRF52 boards. Use a shared implementation. Signed-off-by: Frieder Schrempf <frieder@fris.de>	2025-12-17 10:25:16 +01:00
Frieder Schrempf	6486192477	variants: IkokaNrf52Board: Use NRF52Board base class ... Signed-off-by: Frieder Schrempf <frieder@fris.de>	2025-12-17 10:22:15 +01:00
ripplebiz	d67f311c3d	Merge pull request #1206 from IoTThinks/MCdev-MCUTemperature-for-repeaters-202512 ... Added default temperature from ESP32 MCU and NRF52 MCU	2025-12-15 19:37:34 +11:00
Liam Cottle	2228214ded	Merge pull request #1216 from mattzzw/main ... Update faq.md	2025-12-15 18:18:00 +13:00
mattzzw	2bcc9c10d2	Update faq.md ... Fix typo	2025-12-14 18:29:49 +01:00