Scott Powell
e2571accbe
* ver 1.13.0
2026-02-15 17:24:37 +11:00
ripplebiz
a6e741e30e
Merge pull request #1672 from ChaoticLeah/feature/mute-buzzer-icon
...
Add muted icon to show when buzzer is muted
2026-02-15 15:54:33 +11:00
Scott Powell
0abac35744
* client_repeat state now in _DEVICE_INFO response
2026-02-14 16:45:41 +11:00
Scott Powell
564a19d125
* companion client repeat mode support
2026-02-14 15:50:06 +11:00
Leah
fb025fb67e
Add muted icon to show when buzzer is muted
2026-02-11 10:00:20 +01:00
liamcottle
bafa2ccd22
fix estimated timeout for multi byte path traces
2026-02-10 17:01:30 +13:00
Wessel Nieboer
e8646f5ede
Parse as signed int
2026-02-07 16:58:06 +01:00
Wessel Nieboer
d0720c63c2
Allow negative tx power
...
Like SX1262 allows -9 dBm lowest, some allow lower but that probably
isn't useful
2026-02-06 02:24:51 +01:00
ripplebiz
4b9d5462bb
Merge pull request #1532 from oltaco/esp32board.h-removewifi
...
Refactor ESP32Board.h to save ~500 bytes of DRAM
2026-02-05 13:09:04 +11:00
taco
598489be47
refactor ui with ring buffer and display most recent
2026-02-04 09:38:05 +11:00
taco
8d5eaf500d
add makeBlobPath inline helper for esp32
2026-02-01 00:02:30 +11:00
taco
e6e1b810f8
add DataStore::deleteBlobByKey()
2026-02-01 00:02:29 +11:00
Liam Cottle
06a83c0453
Merge pull request #1531 from agessaman/add-recv-errors-stats
...
Add recv_errors to CMD_GET_STATS STATS_TYPE_PACKETS response
2026-01-30 20:57:07 +13:00
agessaman
019bbf74d3
Add recv_errors to CMD_GET_STATS STATS_TYPE_PACKETS response
...
Append uint32_t recv_errors (RadioLib receive/CRC errors) to packet stats
binary frame. Frame size 26 -> 30 bytes. Update stats_binary_frames.md and
Python/TypeScript parsing examples for backward compatibility (accept >=26).
2026-01-29 20:44:11 -08:00
taco
c7eea3915d
fix: remove esp_wifi.h from esp32board.h
...
saves ~500 bytes of dram and allows Tbeam to compile again
2026-01-30 15:07:40 +11:00
ripplebiz
cf7d95c6de
Merge pull request #1509 from stevenlafl/tbeam-1w
...
Add LilyGO T-Beam 1W Support
2026-01-30 14:55:17 +11:00
Rastislav Vysoky
c345f1da8e
Revert "Remove _serial->isConnected() logic from buzzer notifications"
2026-01-30 00:12:04 +01:00
Scott Powell
465776d667
* ver 1.12.0
2026-01-29 21:12:31 +11:00
Steven Linn
44e7c092c8
Add battery min/max voltage parameter support
2026-01-28 22:24:49 -07:00
taco
96ef5e5efe
allow set prv.key from remote, validate new prv.key
2026-01-25 01:32:48 +11:00
Scott Powell
3c27132914
* T1000e BLE - default node name is now the MAC address
2026-01-23 15:53:58 +11:00
nakoeppen
d68bc74514
Remove _serial->isConnected() logic from buzzer notifications
2026-01-20 20:19:10 -06:00
taco
b919119faf
only write contacts when changed
2026-01-16 13:15:35 +11:00
taco
c61fde9328
always send PUSH_CODE_NEW_ADVERT when advert was not added to contacts[]
2026-01-16 13:15:35 +11:00
taco
df6687034a
bootstrap RTC from contact.lastmod and improve slot overwrite logic
...
slot overwrite logic can now safely use contact.lastmod to find oldest contact for overwrite
2026-01-15 18:01:20 +11:00
taco
403ce1db08
contacts: granular autoadd and overwrite-oldest
2026-01-15 18:01:20 +11:00
Scott Powell
3af25495bb
* Repeater: new anon request sub-type: ANON_REQ_TYPE_REGIONS (rate limited to max 4 every 3 mins)
...
* Companion: new CMD_SEND_ANON_REQ command (reply with existing RESP_CODE_SENT frame)
2026-01-03 12:02:15 +11:00
ripplebiz
e31c46ff56
Merge pull request #1294 from liquidraver/factorynvsreset
...
Add NVS partition reset to ESP factory reset
2026-01-03 11:57:14 +11:00
liquidraver
faf177de46
ESP factory reset clear NVS too
2026-01-02 08:37:22 +01:00
entr0p1
4a869163b2
BUGFIX: replay protection on repeaters tripped by timestamp sent from companion node mobile app. Send the node's RTC timestamp for TXT_TYPE_CLI_DATA messages instead of the timestamp from the app (matches the sendRequest() code logic).
2025-12-30 21:58:59 +11:00
liquidraver
e855706abb
move showalert after saveprefs
2025-12-17 21:27:22 +01:00
taco
638f41d143
calculate shared_secret on demand
2025-12-06 16:21:17 +11:00
fdlamotte
01f7a3c95e
Merge pull request #1057 from liquidraver/wiodev
...
Disable screen switching on when connected
2025-12-04 11:10:51 +01:00
ripplebiz
0082149c60
Merge pull request #996 from mattzzw/dev
...
Add display of IP address to companion screen
2025-12-03 13:52:48 +11:00
ripplebiz
acc32aa166
Merge pull request #1156 from csrutil/persist-gps
...
Persist GPS enabled state to preferences
2025-12-02 21:50:21 +11:00
Rastislav Vysoky
052f17738c
add default LED_STATE_ON for boards that don't have it defined
2025-11-30 10:52:33 +01:00
Scott Powell
e054597a18
* ver 1.11.0
2025-11-30 18:32:10 +11:00
csrutil
cfb7ed876c
CMD_SET_CUSTOM_VAR will update gps and gps_interval
2025-11-30 09:45:56 +08:00
csrutil
39503ad0b4
move GPS preference initialization to UITask
2025-11-29 18:35:34 +08:00
csrutil
4aebc57add
fixed gps init value
2025-11-29 18:02:08 +08:00
csrutil
678915ef3b
add GPS interval validation and bounds checking
2025-11-29 17:30:13 +08:00
csrutil
88fb173297
add configurable GPS update interval
...
Make GPS update interval configurable via settings instead of using hardcoded 1 second value. The interval is persisted from preferences and can be adjusted at runtime through the sensor manager settings interface
2025-11-29 17:20:21 +08:00
csrutil
c641beabd3
https://github.com/meshcore-dev/MeshCore/issues/989 - persist GPS enabled state to preferences
...
Add GPS configuration to NodePrefs structure and persist the GPS
enabled state when toggled via UI. This ensures GPS settings are
retained across device restarts.
2025-11-29 16:37:23 +08:00
ripplebiz
fe874032d5
Merge pull request #1153 from fdlamotte/thinknode_m5
...
Thinknode m5 support
2025-11-29 12:13:30 +11:00
Florent
1c0017b634
thinknode_m5: gps support
2025-11-28 13:15:11 +01:00
Florent
ee4e87c3ee
thinknode_m5: manage baclight
2025-11-28 10:33:19 +01:00
Scott Powell
5b975d9e94
Merge branch 'dev' into ext-trace
2025-11-27 19:31:03 +11:00
ripplebiz
13bf82f1c4
Merge pull request #1130 from zaquaz/buzzer-feature-pr
...
Added buzzer config persistance across restart
2025-11-27 16:04:44 +11:00
zaquaz
6c7b5390e2
Remove default setting, since it is handled in MyMesh
2025-11-26 18:37:56 -08:00
ripplebiz
c17bd5d6fc
Merge pull request #1122 from fschrempf/xiao-nrf-ui-and-power-optimizations
...
Companion Power Optimizations and UI Support for XIAO NRF52
2025-11-26 22:11:02 +11:00
