Liam Cottle
bbc5f0c11a
Merge pull request #1718 from realtag-github/repeater-v1.13-implement-discover
...
discover sends a single repeater discovery request and populates the neighbor list; self is excluded
2026-02-17 23:53:28 +13:00
Scott Powell
2e00298128
* companion: retransmit delays now hard-coded (only for client repeat mode)
2026-02-17 20:25:56 +11:00
Scott Powell
5de3e1bf32
* repeater: slight increase to default direct.txdelay
2026-02-17 20:10:13 +11:00
ripplebiz
a073ba4707
Merge pull request #1719 from 3dpgg/pr_lilygo_tlora_terminal_chat
...
Fix LilyGo_TLora_V2_1_1_6_terminal_chat build
2026-02-17 15:34:56 +11:00
3DPGG
3e53df5082
Fix LilyGo_TLora_V2_1_1_6_terminal_chat build
...
This change addresses two issues. The first is that the
LilyGo_TLora_V2_1_1_6_terminal_chat build would try to compile
simple_repeater/MyMesh.cpp. All other examples of terminal chat
targets are instead building simple_secure_chat/main.cpp . This
change would align this build to the rest of the builds.
The second issue, found during the course of investigating the
first, stems from simple_repeater/MyMesh.cpp using the
MAX_NEIGHBOURS #define to control whether the neighbor list is kept.
Repeaters that keep this list must define this value, and if the
value is not defined, then all neighbor-related functionality is
compiled out. However, the code that replies to
REQ_TYPE_GET_NEIGHBOURS did not properly check for this #define,
and thus any target that compiles simple_repeater/MyMesh.cpp
without defining MAX_NEIGHBOURS would get an undefined variable
compilation error.
As a practical matter though, there are no targets that compile
simple_repeater/MyMesh.cpp AND do not define MAX_NEIGHBOURS,
except this build due to the first issue. As a result, the
second issue is addressed only as a matter of completeness. The
expected behavior with this change is that such a repeater would
send a valid reply indicating zero known neighbors.
2026-02-16 18:10:29 -08:00
realtag
0770618ee2
Allow repeater discovery even if repeater mode is disabled on the requesting repeater.
2026-02-17 01:39:04 +00:00
realtag
bf9c6cb50f
Increased the timeout timer to 60 seconds, up from 30 seconds.
2026-02-17 01:22:17 +00:00
realtag
87c78a98bd
discover.neighbors sends a tagged repeater discovery request and only accepts matching repeater responses
2026-02-17 01:04:14 +00:00
realtag
e8785dd9b0
discover sends a single repeater discovery request and populates the neighbor list; self is excluded
2026-02-17 00:41:24 +00:00
Michael Gjelsø
f822d067a3
Merge branch 'meshcore-dev:dev' into dev
2026-02-15 11:56:57 +01:00
ripplebiz
2005977403
Merge pull request #1699 from recrof/m5stack-m6l-build-fix
...
fix M5Stack Unit M6L build errors
2026-02-15 21:38:00 +11:00
recrof
cafc212bb2
fix M5Stack Unit M6L build errors
2026-02-15 11:25:27 +01:00
Scott Powell
295f67d4fa
Merge branch 'dev'
2026-02-15 17:25:07 +11:00
Scott Powell
e2571accbe
* ver 1.13.0
2026-02-15 17:24:37 +11:00
Liam Cottle
603bd0e446
Merge pull request #1346 from mboelen/patch-1
...
Update faq.md
2026-02-15 18:20:00 +13:00
ripplebiz
88452c412e
Merge pull request #1603 from oltaco/fix-build.sh-for-RP2040-and-STM32
...
Add RP2040 and STM32 support to build.sh
2026-02-15 16:09:46 +11:00
ripplebiz
2220eca4f3
Merge pull request #1669 from Azuresword/fix/wio-tracker-l1-grove-sensor-v2
...
Fix WioTrackerL1 BLE companion: route sensors to Grove I2C bus (Wire1)
2026-02-15 15:55:25 +11:00
ripplebiz
a6e741e30e
Merge pull request #1672 from ChaoticLeah/feature/mute-buzzer-icon
...
Add muted icon to show when buzzer is muted
2026-02-15 15:54:33 +11:00
gjelsoe
88337fc058
Added Wakeup
...
If put in Hibernation it would not wakeup
2026-02-14 12:19:32 +01:00
Michael Gjelsø
64e89359e4
Merge branch 'meshcore-dev:dev' into dev
2026-02-14 12:16:34 +01:00
Scott Powell
0abac35744
* client_repeat state now in _DEVICE_INFO response
2026-02-14 16:45:41 +11:00
Scott Powell
564a19d125
* companion client repeat mode support
2026-02-14 15:50:06 +11:00
taco
5df139f3d6
update build.sh to support RP2040 and STM32
2026-02-13 12:43:04 +11:00
taco
77675ab496
add -D ESP32_PLATFORM to esp32_base
2026-02-13 12:01:04 +11:00
Liam Cottle
246d681b2b
Merge pull request #1678 from liamcottle/main
...
Docs: Update Packet Formats
2026-02-12 17:13:51 +13:00
liamcottle
4224ddff0b
refactor packet format docs
2026-02-12 17:12:23 +13:00
Liam Cottle
5ccae4bddc
Merge pull request #1671 from recrof/rak3112-fix
...
fix: usb and ui for rak 3112
2026-02-12 11:39:27 +13:00
gjelsoe
6c0da535b8
Add Radiomaster Bandit/Bandit Nano support
...
Added support for 5-Way analog joystick.
Added Custom Sh1115 OLED driver.
Added NeoPixels support for Radiomaster Bandit.
Power output 20-30 dbm (100mW-1000mW).
Changed so Analog joystick can be used in UI.
Changed so NeoPixels is used for new Message. (Color can be defined).
Radiomaster Bandit Micro uses the same code as Nano.
2026-02-11 19:45:59 +01:00
Leah
fb025fb67e
Add muted icon to show when buzzer is muted
2026-02-11 10:00:20 +01:00
Rastislav Vysoky
beff18c53b
fix usb and build for rak 3112
2026-02-11 09:34:41 +01:00
dylan
f720338c03
Fix WioTrackerL1 BLE companion: route sensors to Grove I2C bus (Wire1)
...
Sensors connected via the Grove I2C connector (D18/D17) were not detected
because the firmware scanned the OLED I2C bus (Wire, D14/D15) by default.
Adding ENV_PIN_SDA/SCL flags directs EnvironmentSensorManager to use Wire1,
matching the physical Grove connector pinout.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
2026-02-11 14:12:48 +08:00
ripplebiz
e33d93dc7f
Merge pull request #1611 from weebl2000/semtech-patch-tracker-v2
...
Enable register patch heltec tracker v2
2026-02-11 14:04:58 +11:00
ripplebiz
8db42146d1
Merge pull request #1645 from Snayler/Snayler-patch-1
...
Enable TX LED for LilyGo LoRa32 V2.1_1.6
2026-02-11 13:52:47 +11:00
Liam Cottle
e418b0c0ab
Merge pull request #1557 from mattzzw/dev
...
cli_commands.md: `region` available via remote cli in 1.12.0
2026-02-11 11:58:11 +13:00
mattzzw
d11d8ea626
Merge branch 'meshcore-dev:dev' into dev
2026-02-10 22:33:43 +01:00
Liam Cottle
4944a46af1
Merge pull request #1638 from thanegill/build_sh-list
...
build.sh: add list and -l to list firmwares available to build
2026-02-10 22:27:35 +13:00
Liam Cottle
7d7e88e950
Merge pull request #1651 from liamcottle/fix/path-trace-timeout
...
Fix: Path Trace Timeout
2026-02-10 17:17:50 +13:00
liamcottle
bafa2ccd22
fix estimated timeout for multi byte path traces
2026-02-10 17:01:30 +13:00
Snayler
810fd561d2
Enable TX LED for LilyGo LoRa32 V2.1_1.6
...
Working on my device, green TX LED starts blinking every time I transmit
2026-02-09 23:20:29 +00:00
ripplebiz
3f33455b4d
Merge pull request #1570 from Quency-D/fix-heltec-power-consumption
...
Fix heltec-v4 power consumption
2026-02-09 16:49:49 +11:00
ripplebiz
248c3107b4
Merge pull request #1605 from ViezeVingertjes/kiss-modem-spec-compliance
...
Kiss modem spec compliance
2026-02-09 16:45:20 +11:00
Quency-D
9efb7cb0b6
Merge pull request #2 from weebl2000/pr-1570-fix-heltec-v4-power
...
Fix double claim, eliminate dead code at compile time
2026-02-09 10:06:59 +08:00
Thane Gill
3ff1394dd2
build.sh: add list and -l to list firmwares available to build.
2026-02-08 14:49:57 -08:00
Michael
e4ef6dba3d
Merge pull request #2 from agessaman/fix-simplify-kiss-noise-floor
...
Simplify kiss noise floor
2026-02-08 16:26:25 +01:00
Liam Cottle
b1094c2842
Merge pull request #1616 from jbrazio/2026/raknorm
...
Refactor environment names and build flags for RAK variants
2026-02-09 01:33:26 +13:00
ripplebiz
f6fc05601c
Merge pull request #1609 from weebl2000/bridge-always-has-work
...
Bridge always has work (prevents sleep)
2026-02-08 22:42:05 +11:00
Liam Cottle
736ddbfd99
Merge pull request #1620 from thanegill/patch-2
...
Correct manufacturer name 'Elecrow ThinkNode M5'
2026-02-08 14:07:00 +13:00
Thane Gill
31a2e74ada
Correct manufacturer name 'Elecrow ThinkNode M5'
2026-02-07 17:05:51 -08:00
Liam Cottle
e812632235
Merge pull request #1619 from liamcottle/main
...
[docs] update github build script
2026-02-08 13:04:18 +13:00
liamcottle
85aa052e1f
only deploy docs from main branch
2026-02-08 13:01:13 +13:00
