taco
96ef5e5efe
allow set prv.key from remote, validate new prv.key
2026-01-25 01:32:48 +11:00
Scott Powell
3c27132914
* T1000e BLE - default node name is now the MAC address
2026-01-23 15:53:58 +11:00
nakoeppen
d68bc74514
Remove _serial->isConnected() logic from buzzer notifications
2026-01-20 20:19:10 -06:00
taco
b919119faf
only write contacts when changed
2026-01-16 13:15:35 +11:00
taco
c61fde9328
always send PUSH_CODE_NEW_ADVERT when advert was not added to contacts[]
2026-01-16 13:15:35 +11:00
taco
df6687034a
bootstrap RTC from contact.lastmod and improve slot overwrite logic
...
slot overwrite logic can now safely use contact.lastmod to find oldest contact for overwrite
2026-01-15 18:01:20 +11:00
taco
403ce1db08
contacts: granular autoadd and overwrite-oldest
2026-01-15 18:01:20 +11:00
Scott Powell
3af25495bb
* Repeater: new anon request sub-type: ANON_REQ_TYPE_REGIONS (rate limited to max 4 every 3 mins)
...
* Companion: new CMD_SEND_ANON_REQ command (reply with existing RESP_CODE_SENT frame)
2026-01-03 12:02:15 +11:00
ripplebiz
e31c46ff56
Merge pull request #1294 from liquidraver/factorynvsreset
...
Add NVS partition reset to ESP factory reset
2026-01-03 11:57:14 +11:00
liquidraver
faf177de46
ESP factory reset clear NVS too
2026-01-02 08:37:22 +01:00
entr0p1
4a869163b2
BUGFIX: replay protection on repeaters tripped by timestamp sent from companion node mobile app. Send the node's RTC timestamp for TXT_TYPE_CLI_DATA messages instead of the timestamp from the app (matches the sendRequest() code logic).
2025-12-30 21:58:59 +11:00
liquidraver
e855706abb
move showalert after saveprefs
2025-12-17 21:27:22 +01:00
taco
638f41d143
calculate shared_secret on demand
2025-12-06 16:21:17 +11:00
fdlamotte
01f7a3c95e
Merge pull request #1057 from liquidraver/wiodev
...
Disable screen switching on when connected
2025-12-04 11:10:51 +01:00
ripplebiz
0082149c60
Merge pull request #996 from mattzzw/dev
...
Add display of IP address to companion screen
2025-12-03 13:52:48 +11:00
ripplebiz
acc32aa166
Merge pull request #1156 from csrutil/persist-gps
...
Persist GPS enabled state to preferences
2025-12-02 21:50:21 +11:00
Rastislav Vysoky
052f17738c
add default LED_STATE_ON for boards that don't have it defined
2025-11-30 10:52:33 +01:00
Scott Powell
e054597a18
* ver 1.11.0
2025-11-30 18:32:10 +11:00
csrutil
cfb7ed876c
CMD_SET_CUSTOM_VAR will update gps and gps_interval
2025-11-30 09:45:56 +08:00
csrutil
39503ad0b4
move GPS preference initialization to UITask
2025-11-29 18:35:34 +08:00
csrutil
4aebc57add
fixed gps init value
2025-11-29 18:02:08 +08:00
csrutil
678915ef3b
add GPS interval validation and bounds checking
2025-11-29 17:30:13 +08:00
csrutil
88fb173297
add configurable GPS update interval
...
Make GPS update interval configurable via settings instead of using hardcoded 1 second value. The interval is persisted from preferences and can be adjusted at runtime through the sensor manager settings interface
2025-11-29 17:20:21 +08:00
csrutil
c641beabd3
https://github.com/meshcore-dev/MeshCore/issues/989 - persist GPS enabled state to preferences
...
Add GPS configuration to NodePrefs structure and persist the GPS
enabled state when toggled via UI. This ensures GPS settings are
retained across device restarts.
2025-11-29 16:37:23 +08:00
ripplebiz
fe874032d5
Merge pull request #1153 from fdlamotte/thinknode_m5
...
Thinknode m5 support
2025-11-29 12:13:30 +11:00
Florent
1c0017b634
thinknode_m5: gps support
2025-11-28 13:15:11 +01:00
Florent
ee4e87c3ee
thinknode_m5: manage baclight
2025-11-28 10:33:19 +01:00
Scott Powell
5b975d9e94
Merge branch 'dev' into ext-trace
2025-11-27 19:31:03 +11:00
ripplebiz
13bf82f1c4
Merge pull request #1130 from zaquaz/buzzer-feature-pr
...
Added buzzer config persistance across restart
2025-11-27 16:04:44 +11:00
zaquaz
6c7b5390e2
Remove default setting, since it is handled in MyMesh
2025-11-26 18:37:56 -08:00
ripplebiz
c17bd5d6fc
Merge pull request #1122 from fschrempf/xiao-nrf-ui-and-power-optimizations
...
Companion Power Optimizations and UI Support for XIAO NRF52
2025-11-26 22:11:02 +11:00
Scott Powell
cdbeacdc4d
Merge branch 'dev' into ext-trace
2025-11-25 15:17:48 +11:00
ripplebiz
f2740150df
Merge pull request #1075 from agessaman/companion-stats
...
Add statistics commands to return device metrics on companions
2025-11-24 12:34:35 +11:00
Frieder Schrempf
048bd268a1
companion: ui: Respect LED_STATE_ON for status LED
...
The current logic only works for active high LEDs. Some boards need
an active low level control and therefore they set LED_STATE_ON to 0.
Take this into account and use the correct LED pattern for both cases.
Signed-off-by: Frieder Schrempf <frieder@fris.de>
2025-11-22 15:05:08 +01:00
Jaroslav Škarvada
07e7e2d44b
companion: Suspend radio when hibernating
...
This should significantly reduce power consumption in hibernation.
Fixes : #1014
Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com>
Signed-off-by: Frieder Schrempf <frieder@fris.de> # generalize for all radios and UIs
2025-11-22 15:05:01 +01:00
Scott Powell
b33d226c58
* proposal for 'Extended Trace' packets. Using 'flags' byte, lower 2 bits, for path hash size.
2025-11-21 15:44:31 +11:00
zaquaz
2bd47de3b9
Added buzzer config persistance accross restart
2025-11-20 19:02:32 -08:00
agessaman
a3c9a07377
Modify CMD_GET_STATS with sub-types for core, radio, and packet statistics. Consolidated to a single RESP_CODE_STATS with a second byte to identify response structure. Updated documentation and examples to reflect the new command structure and response parsing.
2025-11-17 09:57:36 -08:00
Stephan Rodemeier
16c294ce60
Allow SF smaller than 7 to be saved
2025-11-13 22:25:55 +01:00
Scott Powell
91e9fcea4b
* ver 1.10.0
2025-11-13 20:45:38 +11:00
agessaman
39f83efbfe
Remove unused statistics formatting methods and associated header includes from MyMesh class. Whoops.
2025-11-09 11:39:47 -08:00
agessaman
80d6dd4367
Update statistics handling to use binary frames instead of JSON formatting for consistency with other companion commands. Added documentation of frame structure with code examples.
2025-11-09 11:28:49 -08:00
agessaman
c9aa536ca6
Reverted MyMesh constructor for simplicity.
...
Updated formatStatsReply method to use new member variables for statistics handling.
Removed excess variable creation
2025-11-09 11:28:49 -08:00
agessaman
df4dab8509
Add statistics commands and response handling in MyMesh
...
- Introduced new commands for retrieving statistics: CMD_GET_STATS_CORE, CMD_GET_STATS_RADIO, and CMD_GET_STATS_PACKETS.
- Implemented corresponding response handling methods to format and send statistics data.
- Updated MyMesh constructor to initialize new member variables for managing statistics.
- Included StatsFormatHelper for formatting statistics replies.
2025-11-09 11:28:49 -08:00
Scott Powell
28b90c18cf
Merge branch 'transportcodes' into dev
2025-11-07 14:52:11 +11:00
Scott Powell
2e63499ae5
* companion: protocol ver bumped to 8.
2025-11-06 22:51:17 +11:00
Scott Powell
4a5404d997
* companion: added CMD_SEND_CONTROL_DATA, and PUSH_CODE_CONTROL_DATA
2025-11-06 22:10:20 +11:00
Scott Powell
937865c8fd
* companion: new CMD_SET_FLOOD_SCOPE (54)
2025-11-05 14:56:18 +11:00
Scott Powell
9ebeb477aa
* RegionMap: inverted 'flags' to _deny_ bits
...
* Mesh: new filterRecvFloodPacket() for overriding
* repeater CLI: 'allow' -> 'allowf' or 'denyf'
2025-11-05 14:34:44 +11:00
liquidraver
99a3473169
even less comments \o/
2025-11-03 21:41:11 +01:00
