Merge pull request #1266 from IoTThinks/MCdev-Powersaving-for-esp32-202512

Added powersaving to all ESP32 boards with RTC-supported DIO1

src/MeshCore.h

@@ -51,6 +51,7 @@ public:
   virtual void onAfterTransmit() { }
   virtual void reboot() = 0;
   virtual void powerOff() { /* no op */ }
+  virtual void sleep(uint32_t secs)  { /* no op */ }
   virtual uint32_t getGpio() { return 0; }
   virtual void setGpio(uint32_t values) {}
   virtual uint8_t getStartupReason() const = 0;

src/helpers/CommonCLI.cpp

@@ -65,7 +65,8 @@ void CommonCLI::loadPrefsInt(FILESYSTEM* fs, const char* filename) {
     file.read((uint8_t *)&_prefs->bridge_baud, sizeof(_prefs->bridge_baud));                       // 131
     file.read((uint8_t *)&_prefs->bridge_channel, sizeof(_prefs->bridge_channel));                 // 135
     file.read((uint8_t *)&_prefs->bridge_secret, sizeof(_prefs->bridge_secret));                   // 136
-    file.read(pad, 4);                                                                             // 152
+    file.read((uint8_t *)&_prefs->powersaving_enabled, sizeof(_prefs->powersaving_enabled));       // 152
+    file.read(pad, 3);                                                                             // 153
     file.read((uint8_t *)&_prefs->gps_enabled, sizeof(_prefs->gps_enabled));                       // 156
     file.read((uint8_t *)&_prefs->gps_interval, sizeof(_prefs->gps_interval));                     // 157
     file.read((uint8_t *)&_prefs->advert_loc_policy, sizeof (_prefs->advert_loc_policy));          // 161
@@ -93,6 +94,8 @@ void CommonCLI::loadPrefsInt(FILESYSTEM* fs, const char* filename) {
     _prefs->bridge_baud = constrain(_prefs->bridge_baud, 9600, 115200);
     _prefs->bridge_channel = constrain(_prefs->bridge_channel, 0, 14);
 
+    _prefs->powersaving_enabled = constrain(_prefs->powersaving_enabled, 0, 1);
+
     _prefs->gps_enabled = constrain(_prefs->gps_enabled, 0, 1);
     _prefs->advert_loc_policy = constrain(_prefs->advert_loc_policy, 0, 2);
 
@@ -145,7 +148,8 @@ void CommonCLI::savePrefs(FILESYSTEM* fs) {
     file.write((uint8_t *)&_prefs->bridge_baud, sizeof(_prefs->bridge_baud));                       // 131
     file.write((uint8_t *)&_prefs->bridge_channel, sizeof(_prefs->bridge_channel));                 // 135
     file.write((uint8_t *)&_prefs->bridge_secret, sizeof(_prefs->bridge_secret));                   // 136
-    file.write(pad, 4);                                                                             // 152
+    file.write((uint8_t *)&_prefs->powersaving_enabled, sizeof(_prefs->powersaving_enabled));       // 152
+    file.write(pad, 3);                                                                             // 153
     file.write((uint8_t *)&_prefs->gps_enabled, sizeof(_prefs->gps_enabled));                       // 156
     file.write((uint8_t *)&_prefs->gps_interval, sizeof(_prefs->gps_interval));                     // 157
     file.write((uint8_t *)&_prefs->advert_loc_policy, sizeof(_prefs->advert_loc_policy));           // 161
@@ -676,6 +680,20 @@ void CommonCLI::handleCommand(uint32_t sender_timestamp, const char* command, ch
         strcpy(reply, "Can't find GPS");
       }
 #endif
+    } else if (memcmp(command, "powersaving on", 14) == 0) {
+      _prefs->powersaving_enabled = 1;
+      savePrefs();
+      strcpy(reply, "ok"); // TODO: to return Not supported if required
+    } else if (memcmp(command, "powersaving off", 15) == 0) {
+      _prefs->powersaving_enabled = 0;
+      savePrefs();
+      strcpy(reply, "ok");
+    } else if (memcmp(command, "powersaving", 11) == 0) {
+      if (_prefs->powersaving_enabled) {
+        strcpy(reply, "on");
+      } else {
+        strcpy(reply, "off");
+      }
     } else if (memcmp(command, "log start", 9) == 0) {
       _callbacks->setLoggingOn(true);
       strcpy(reply, "   logging on");

src/helpers/CommonCLI.h

@@ -42,6 +42,8 @@ struct NodePrefs { // persisted to file
   uint32_t bridge_baud;   // 9600, 19200, 38400, 57600, 115200 (default 115200)
   uint8_t bridge_channel; // 1-14 (ESP-NOW only)
   char bridge_secret[16]; // for XOR encryption of bridge packets (ESP-NOW only)
+  // Power setting
+  uint8_t powersaving_enabled; // boolean
   // Gps settings
   uint8_t gps_enabled;
   uint32_t gps_interval; // in seconds

src/helpers/ESP32Board.h

@@ -8,6 +8,8 @@
 #include <rom/rtc.h>
 #include <sys/time.h>
 #include <Wire.h>
+#include "esp_wifi.h"
+#include "driver/rtc_io.h"
 
 class ESP32Board : public mesh::MainBoard {
 protected:
@@ -54,6 +56,31 @@ public:
     return raw / 4;
   }
 
+  void enterLightSleep(uint32_t secs) {
+#if defined(CONFIG_IDF_TARGET_ESP32S3) && defined(P_LORA_DIO_1) // Supported ESP32 variants
+    if (rtc_gpio_is_valid_gpio((gpio_num_t)P_LORA_DIO_1)) { // Only enter sleep mode if P_LORA_DIO_1 is RTC pin
+      esp_sleep_pd_config(ESP_PD_DOMAIN_RTC_PERIPH, ESP_PD_OPTION_ON);
+      esp_sleep_enable_ext1_wakeup((1L << P_LORA_DIO_1), ESP_EXT1_WAKEUP_ANY_HIGH); // To wake up when receiving a LoRa packet
+
+      if (secs > 0) {
+        esp_sleep_enable_timer_wakeup(secs * 1000000); // To wake up every hour to do periodically jobs
+      }
+
+      esp_light_sleep_start(); // CPU enters light sleep
+    }
+#endif
+  }
+
+  void sleep(uint32_t secs) override {
+    // To check for WiFi status to see if there is active OTA
+    wifi_mode_t mode;
+    esp_err_t err = esp_wifi_get_mode(&mode);
+    
+    if (err != ESP_OK) {          // WiFi is off ~ No active OTA, safe to go to sleep
+      enterLightSleep(secs);      // To wake up after "secs" seconds or when receiving a LoRa packet
+    }
+  }
+
   uint8_t getStartupReason() const override { return startup_reason; }
 
 #if defined(P_LORA_TX_LED)

src/helpers/esp32/TBeamBoard.h

@@ -2,16 +2,7 @@
 
 #if defined(TBEAM_SUPREME_SX1262) || defined(TBEAM_SX1262) || defined(TBEAM_SX1276)
 
-#include <Wire.h>
-#include <Arduino.h>
-#include "XPowersLib.h"
-#include "helpers/ESP32Board.h"
-#include <driver/rtc_io.h>
-//#include <RadioLib.h>
-//#include <helpers/RadioLibWrappers.h>
-//#include <helpers/CustomSX1262Wrapper.h>
-//#include <helpers/CustomSX1276Wrapper.h>
-
+// Define pin mappings BEFORE including ESP32Board.h so sleep() can use P_LORA_DIO_1
 #ifdef TBEAM_SUPREME_SX1262
   // LoRa radio module pins for TBeam S3 Supreme SX1262
   #define  P_LORA_DIO_0   -1   //NC
@@ -90,6 +81,13 @@
 //   SX1276
 // };
 
+// Include headers AFTER pin definitions so ESP32Board::sleep() can use P_LORA_DIO_1
+#include <Wire.h>
+#include <Arduino.h>
+#include "XPowersLib.h"
+#include "helpers/ESP32Board.h"
+#include <driver/rtc_io.h>
+
 class TBeamBoard : public ESP32Board {
 XPowersLibInterface *PMU = NULL;
 //PhysicalLayer * pl;