tracker_l1: support for EnvironmentSensorManager

src/helpers/sensors/EnvironmentSensorManager.cpp

@@ -108,7 +108,13 @@ bool EnvironmentSensorManager::begin() {
   #endif
 
   #if ENV_PIN_SDA && ENV_PIN_SCL
+    #ifdef NRF52_PLATFORM
+  Wire1.setPins(ENV_PIN_SDA, ENV_PIN_SCL);
+  Wire1.setClock(100000);
+  Wire1.begin();
+    #else
   Wire1.begin(ENV_PIN_SDA, ENV_PIN_SCL, 100000);
+    #endif
   MESH_DEBUG_PRINTLN("Second I2C initialized on pins SDA: %d SCL: %d", ENV_PIN_SDA, ENV_PIN_SCL);
   #endif
 

variants/wio-tracker-l1-eink/platformio.ini

@@ -22,6 +22,12 @@ build_flags = ${nrf52_base.build_flags}
   -D DISPLAY_ROTATION=1
   -D DISABLE_DIAGNOSTIC_OUTPUT
   -D AUTO_OFF_MILLIS=0
+  -D ENV_INCLUDE_GPS=1
+  -D ENV_INCLUDE_BME280=1
+  -D GPS_BAUD_RATE=9600
+  -D PIN_GPS_EN=PIN_GPS_STANDBY
+  -D ENV_PIN_SDA=PIN_WIRE1_SDA
+  -D ENV_PIN_SCL=PIN_WIRE1_SCL
 build_src_filter = ${nrf52_base.build_src_filter}
   +<WioTrackerL1Board.cpp>
   +<../variants/wio-tracker-l1>
@@ -51,7 +57,7 @@ build_flags = ${WioTrackerL1Eink.build_flags}
   -D QSPIFLASH=1
   ; -D MESH_PACKET_LOGGING=1
   ; -D MESH_DEBUG=1
-  -D UI_RECENT_LIST_SIZE=9
+  -D UI_RECENT_LIST_SIZE=6
   -D UI_SENSORS_PAGE=1
 build_src_filter = ${WioTrackerL1Eink.build_src_filter}
   +<helpers/nrf52/SerialBLEInterface.cpp>

variants/wio-tracker-l1/platformio.ini

@@ -13,7 +13,12 @@ build_flags = ${nrf52_base.build_flags}
   -D SX126X_CURRENT_LIMIT=140
   -D SX126X_RX_BOOSTED_GAIN=1
   -D PIN_OLED_RESET=-1
-  ; -D MESH_DEBUG=1
+  -D ENV_INCLUDE_GPS=1
+  -D ENV_INCLUDE_BME280=1
+  -D GPS_BAUD_RATE=9600
+  -D PIN_GPS_EN=PIN_GPS_STANDBY
+  -D ENV_PIN_SDA=PIN_WIRE1_SDA
+  -D ENV_PIN_SCL=PIN_WIRE1_SCL
 build_src_filter = ${nrf52_base.build_src_filter}
   +<WioTrackerL1Board.cpp>
   +<../variants/wio-tracker-l1>

variants/wio-tracker-l1/target.cpp

@@ -11,8 +11,13 @@ WRAPPER_CLASS radio_driver(radio, board);
 
 VolatileRTCClock fallback_clock;
 AutoDiscoverRTCClock rtc_clock(fallback_clock);
-MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1);
+
-WioTrackerL1SensorManager sensors = WioTrackerL1SensorManager(nmea);
+#ifdef ENV_INCLUDE_GPS
+MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1, &rtc_clock);
+EnvironmentSensorManager sensors = EnvironmentSensorManager(nmea);
+#else
+EnvironmentSensorManager sensors = EnvironmentSensorManager();
+#endif
 
 #ifdef DISPLAY_CLASS
   DISPLAY_CLASS display;
@@ -42,107 +47,6 @@ void radio_set_tx_power(uint8_t dbm) {
   radio.setOutputPower(dbm);
 }
 
-void WioTrackerL1SensorManager::start_gps()
-{
-  if (!gps_active)
-  {
-    MESH_DEBUG_PRINTLN("starting GPS");
-    digitalWrite(PIN_GPS_STANDBY, HIGH);
-    gps_active = true;
-  }
-}
-
-void WioTrackerL1SensorManager::stop_gps()
-{
-  if (gps_active)
-  {
-    MESH_DEBUG_PRINTLN("stopping GPS");
-    digitalWrite(PIN_GPS_STANDBY, LOW);
-    gps_active = false;
-  }
-}
-
-bool WioTrackerL1SensorManager::begin()
-{
-  Serial1.setPins(PIN_GPS_TX, PIN_GPS_RX); // be sure to tx into rx and rx into tx
-  Serial1.begin(GPS_BAUDRATE);
-
-  pinMode(PIN_GPS_STANDBY, OUTPUT);
-  digitalWrite(PIN_GPS_STANDBY, HIGH); // Wake GPS from standby
-  delay(500);
-
-  // We'll consider GPS detected if we see any data on Serial1
-  if (Serial1.available() > 0)
-  {
-    MESH_DEBUG_PRINTLN("GPS detected");
-  }
-  else
-  {
-    MESH_DEBUG_PRINTLN("No GPS detected");
-  }
-  digitalWrite(PIN_GPS_STANDBY, LOW); // Put GPS back into standby mode
-  return true;
-}
-
-bool WioTrackerL1SensorManager::querySensors(uint8_t requester_permissions, CayenneLPP &telemetry)
-{
-  if (requester_permissions & TELEM_PERM_LOCATION)
-  { // does requester have permission?
-    telemetry.addGPS(TELEM_CHANNEL_SELF, node_lat, node_lon, node_altitude);
-  }
-  return true;
-}
-
-void WioTrackerL1SensorManager::loop()
-{
-  static long next_gps_update = 0;
-  _location->loop();
-  if (millis() > next_gps_update && gps_active) // don't bother if gps position is not enabled
-  {
-    if (_location->isValid())
-    {
-      node_lat = ((double)_location->getLatitude()) / 1000000.;
-      node_lon = ((double)_location->getLongitude()) / 1000000.;
-      node_altitude = ((double)_location->getAltitude()) / 1000.0;
-      MESH_DEBUG_PRINTLN("lat %f lon %f", node_lat, node_lon);
-    }
-    next_gps_update = millis() + (1000 * 60); // after initial update, only check every minute TODO: should be configurable
-  }
-}
-
-int WioTrackerL1SensorManager::getNumSettings() const { return 1; } // just one supported: "gps" (power switch)
-
-const char *WioTrackerL1SensorManager::getSettingName(int i) const
-{
-  return i == 0 ? "gps" : NULL;
-}
-
-const char *WioTrackerL1SensorManager::getSettingValue(int i) const
-{
-  if (i == 0)
-  {
-    return gps_active ? "1" : "0";
-  }
-  return NULL;
-}
-
-bool WioTrackerL1SensorManager::setSettingValue(const char *name, const char *value)
-{
-  if (strcmp(name, "gps") == 0)
-  {
-    if (strcmp(value, "0") == 0)
-    {
-      stop_gps();
-    }
-    else
-    {
-      start_gps();
-    }
-    return true;
-  }
-  return false; // not supported
-}
-
 mesh::LocalIdentity radio_new_identity() {
   RadioNoiseListener rng(radio);
   return mesh::LocalIdentity(&rng);  // create new random identity

variants/wio-tracker-l1/target.h

@@ -7,6 +7,7 @@
 #include <helpers/radiolib/CustomSX1262Wrapper.h>
 #include <helpers/AutoDiscoverRTCClock.h>
 #include <helpers/ArduinoHelpers.h>
+#include <helpers/sensors/EnvironmentSensorManager.h>
 #ifdef DISPLAY_CLASS
   #if defined(WIO_TRACKER_L1_EINK)
     #include <helpers/ui/GxEPDDisplay.h>
@@ -17,30 +18,10 @@
 #endif
 #include <helpers/sensors/EnvironmentSensorManager.h>
 
-class WioTrackerL1SensorManager : public SensorManager
-{
-  bool gps_active = false;
-  LocationProvider *_location;
-
-  void start_gps();
-  void stop_gps();
-
-public:
-  WioTrackerL1SensorManager(LocationProvider &location) : _location(&location) {}
-  bool begin() override;
-  bool querySensors(uint8_t requester_permissions, CayenneLPP &telemetry) override;
-  void loop() override;
-  int getNumSettings() const override;
-  const char *getSettingName(int i) const override;
-  const char *getSettingValue(int i) const override;
-  bool setSettingValue(const char *name, const char *value) override;
-};
-
-
 extern WioTrackerL1Board board;
 extern WRAPPER_CLASS radio_driver;
 extern AutoDiscoverRTCClock rtc_clock;
-extern WioTrackerL1SensorManager sensors;
+extern EnvironmentSensorManager sensors;
 #ifdef DISPLAY_CLASS
   extern DISPLAY_CLASS display;
   extern MomentaryButton user_btn;

variants/wio-tracker-l1/variant.h

@@ -78,8 +78,8 @@
 
 #define PIN_WIRE_SDA            (14)
 #define PIN_WIRE_SCL            (15)
-#define PIN_WIRE1_SDA           (17)
+#define PIN_WIRE1_SDA           (18)
-#define PIN_WIRE1_SCL           (18)
+#define PIN_WIRE1_SCL           (17)
 #define I2C_NO_RESCAN
 #define DISPLAY_ADDRESS         0x3D  // SH1106 OLED I2C address