Merge pull request #814 from WattleFoxxo/tdeck

LilyGo TDeck support

variants/lilygo_tdeck/TDeckBoard.cpp

@@ -0,0 +1,35 @@
+#include <Arduino.h>
+#include "TDeckBoard.h"
+
+uint32_t deviceOnline = 0x00;
+
+void TDeckBoard::begin() {
+  
+  ESP32Board::begin();
+  
+  // Enable peripheral power
+  pinMode(PIN_PERF_POWERON, OUTPUT);
+  digitalWrite(PIN_PERF_POWERON, HIGH);
+
+  // Configure user button
+  pinMode(PIN_USER_BTN, INPUT);
+
+  // Configure LoRa Pins
+  pinMode(P_LORA_MISO, INPUT_PULLUP);
+  // pinMode(P_LORA_DIO_1, INPUT_PULLUP);
+
+  #ifdef P_LORA_TX_LED
+    digitalWrite(P_LORA_TX_LED, HIGH); // inverted pin for SX1276 - HIGH for off
+  #endif
+
+  esp_reset_reason_t reason = esp_reset_reason();
+  if (reason == ESP_RST_DEEPSLEEP) {
+    long wakeup_source = esp_sleep_get_ext1_wakeup_status();
+    if (wakeup_source & (1 << P_LORA_DIO_1)) {
+      startup_reason = BD_STARTUP_RX_PACKET; // received a LoRa packet (while in deep sleep)
+    }
+
+    rtc_gpio_hold_dis((gpio_num_t)P_LORA_NSS);
+    rtc_gpio_deinit((gpio_num_t)P_LORA_DIO_1);
+  }
+}

variants/lilygo_tdeck/TDeckBoard.h

@@ -0,0 +1,68 @@
+#pragma once
+
+#include <Wire.h>
+#include <Arduino.h>
+#include "helpers/ESP32Board.h"
+#include <driver/rtc_io.h>
+
+#define PIN_VBAT_READ 4
+#define BATTERY_SAMPLES 8
+#define ADC_MULTIPLIER (2.0f * 3.3f * 1000)
+
+class TDeckBoard : public ESP32Board {
+public:
+  void begin();
+
+  #ifdef P_LORA_TX_LED
+    void onBeforeTransmit() override{
+      digitalWrite(P_LORA_TX_LED, LOW); // turn TX LED on - invert pin for SX1276
+    }
+
+    void onAfterTransmit() override{
+      digitalWrite(P_LORA_TX_LED, HIGH); // turn TX LED off - invert pin for SX1276
+    }
+  #endif
+
+  void enterDeepSleep(uint32_t secs, int pin_wake_btn) {
+    esp_sleep_pd_config(ESP_PD_DOMAIN_RTC_PERIPH, ESP_PD_OPTION_ON);
+
+    // Make sure the DIO1 and NSS GPIOs are hold on required levels during deep sleep
+    rtc_gpio_set_direction((gpio_num_t)P_LORA_DIO_1, RTC_GPIO_MODE_INPUT_ONLY);
+    rtc_gpio_pulldown_en((gpio_num_t)P_LORA_DIO_1);
+
+    rtc_gpio_hold_en((gpio_num_t)P_LORA_NSS);
+
+    if (pin_wake_btn < 0) {
+      esp_sleep_enable_ext1_wakeup( (1L << P_LORA_DIO_1), ESP_EXT1_WAKEUP_ANY_HIGH); // wake up on: recv LoRa packet
+    } else {
+      esp_sleep_enable_ext1_wakeup( (1L << P_LORA_DIO_1) | (1L << pin_wake_btn), ESP_EXT1_WAKEUP_ANY_HIGH); // wake up on: recv LoRa packet OR wake btn
+    }
+
+    if (secs > 0) {
+      esp_sleep_enable_timer_wakeup(secs * 1000000);
+    }
+
+    // Finally set ESP32 into sleep
+    esp_deep_sleep_start(); // CPU halts here and never returns!
+  }
+
+  uint16_t getBattMilliVolts() {
+    #if defined(PIN_VBAT_READ) && defined(ADC_MULTIPLIER)
+      analogReadResolution(12);
+
+      uint32_t raw = 0;
+      for (int i = 0; i < BATTERY_SAMPLES; i++) {
+        raw += analogRead(PIN_VBAT_READ);
+      }
+
+      raw = raw / BATTERY_SAMPLES;
+      return (ADC_MULTIPLIER * raw) / 4096;
+    #else
+      return 0;
+    #endif
+  }
+
+  const char* getManufacturerName() const{
+    return "LilyGo T-Deck";
+  }
+};

variants/lilygo_tdeck/platformio.ini

@@ -0,0 +1,96 @@
+[LilyGo_TDeck]
+extends = esp32_base
+board = t-deck
+build_flags =
+  ${esp32_base.build_flags}
+  ${sensor_base.build_flags}
+  -I variants/lilygo_tdeck
+  -D LILYGO_TDECK
+  -D BOARD_HAS_PSRAM=1
+  -D CORE_DEBUG_LEVEL=1
+  -D ARDUINO_USB_CDC_ON_BOOT=1
+  -D PIN_USER_BTN=0  ; Trackball button
+  -D PIN_PERF_POWERON=10 ; Peripheral power pin
+  -D RADIO_CLASS=CustomSX1262
+  -D WRAPPER_CLASS=CustomSX1262Wrapper
+  -D LORA_TX_POWER=22
+  -D SX126X_DIO2_AS_RF_SWITCH=false
+  -D SX126X_CURRENT_LIMIT=140
+  -D SX126X_RX_BOOSTED_GAIN=1
+  -D SX126X_DIO3_TCXO_VOLTAGE=1.8f
+  -D P_LORA_DIO_1=45 ; LORA IRQ pin
+  -D P_LORA_NSS=9    ; LORA SS pin
+  -D P_LORA_RESET=17 ; LORA RST pin
+  -D P_LORA_BUSY=13  ; LORA Busy pin
+  -D P_LORA_SCLK=40  ; LORA SCLK pin
+  -D P_LORA_MISO=38  ; LORA MISO pin
+  -D P_LORA_MOSI=41  ; LORA MOSI pin
+  -D DISPLAY_CLASS=ST7789LCDDisplay
+  -D DISPLAY_SCALE_X=2.5
+  -D DISPLAY_SCALE_Y=3.75
+  -D PIN_TFT_RST=-1
+  -D PIN_TFT_VDD_CTL=-1
+  -D PIN_TFT_LEDA_CTL=42
+  -D PIN_TFT_CS=12
+  -D PIN_TFT_DC=11
+  -D PIN_TFT_SCL=40
+  -D PIN_TFT_SDA=41
+build_src_filter = ${esp32_base.build_src_filter}
+  +<../variants/lilygo_tdeck>
+lib_deps =
+  ${esp32_base.lib_deps}
+  ${sensor_base.lib_deps}
+  adafruit/Adafruit ST7735 and ST7789 Library @ ^1.11.0
+
+[env:LilyGo_TDeck_companion_radio_usb]
+extends = LilyGo_TDeck
+build_flags =
+  ${LilyGo_TDeck.build_flags}
+  -I examples/companion_radio/ui-new
+  -D MAX_CONTACTS=350
+  -D MAX_GROUP_CHANNELS=40
+  -D OFFLINE_QUEUE_SIZE=256
+build_src_filter = ${LilyGo_TDeck.build_src_filter}
+  +<helpers/esp32/*.cpp>
+  +<helpers/ui/MomentaryButton.cpp>
+  +<../examples/companion_radio/*.cpp>
+  +<../examples/companion_radio/ui-new/*.cpp>
+  +<helpers/ui/ST7789LCDDisplay.cpp>
+lib_deps =
+  ${LilyGo_TDeck.lib_deps}
+  densaugeo/base64 @ ~1.4.0
+
+[env:LilyGo_TDeck_companion_radio_ble]
+extends = LilyGo_TDeck
+build_flags =
+  ${LilyGo_TDeck.build_flags}
+  -I examples/companion_radio/ui-new
+  -D MAX_CONTACTS=350
+  -D MAX_GROUP_CHANNELS=40
+  -D BLE_PIN_CODE=123456
+  -D OFFLINE_QUEUE_SIZE=256
+build_src_filter = ${LilyGo_TDeck.build_src_filter}
+  +<helpers/esp32/*.cpp>
+  +<helpers/ui/MomentaryButton.cpp>
+  +<../examples/companion_radio/*.cpp>
+  +<../examples/companion_radio/ui-new/*.cpp>
+  +<helpers/ui/ST7789LCDDisplay.cpp>
+lib_deps =
+  ${LilyGo_TDeck.lib_deps}
+  densaugeo/base64 @ ~1.4.0
+
+[env:LilyGo_TDeck_repeater]
+extends = LilyGo_TDeck
+build_flags =
+  ${LilyGo_TDeck.build_flags}
+  -D ADVERT_NAME='"TDeck Repeater"'
+  -D ADVERT_LAT=0.0
+  -D ADVERT_LON=0.0
+  -D ADMIN_PASSWORD='"password"'
+  -D MAX_NEIGHBOURS=8
+build_src_filter = ${LilyGo_TDeck.build_src_filter}
+  +<../examples/simple_repeater>
+  +<helpers/ui/ST7789LCDDisplay.cpp>
+lib_deps =
+  ${LilyGo_TDeck.lib_deps}
+  ${esp32_ota.lib_deps}

variants/lilygo_tdeck/target.cpp

@@ -0,0 +1,53 @@
+#include <Arduino.h>
+#include "target.h"
+
+TDeckBoard board;
+
+#if defined(P_LORA_SCLK)
+  static SPIClass spi;
+  RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, spi);
+#else
+  RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY);
+#endif
+
+WRAPPER_CLASS radio_driver(radio, board);
+
+ESP32RTCClock fallback_clock;
+AutoDiscoverRTCClock rtc_clock(fallback_clock);
+SensorManager sensors;
+
+#ifdef DISPLAY_CLASS
+  DISPLAY_CLASS display;
+  MomentaryButton user_btn(PIN_USER_BTN, 1000, true);
+#endif
+
+bool radio_init() {
+  fallback_clock.begin();
+  rtc_clock.begin(Wire);
+
+#if defined(P_LORA_SCLK)
+  return radio.std_init(&spi);
+#else
+  return radio.std_init();
+#endif
+}
+
+uint32_t radio_get_rng_seed() {
+  return radio.random(0x7FFFFFFF);
+}
+
+void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
+  radio.setFrequency(freq);
+  radio.setSpreadingFactor(sf);
+  radio.setBandwidth(bw);
+  radio.setCodingRate(cr);
+}
+
+void radio_set_tx_power(uint8_t dbm) {
+  radio.setOutputPower(dbm);
+}
+
+mesh::LocalIdentity radio_new_identity() {
+  RadioNoiseListener rng(radio);
+  return mesh::LocalIdentity(&rng); // create new random identity
+}

variants/lilygo_tdeck/target.h

@@ -0,0 +1,29 @@
+#pragma once
+
+#define RADIOLIB_STATIC_ONLY 1
+#include <RadioLib.h>
+#include <helpers/radiolib/RadioLibWrappers.h>
+#include <helpers/radiolib/CustomSX1262Wrapper.h>
+#include <TDeckBoard.h>
+#include <helpers/AutoDiscoverRTCClock.h>
+#include <helpers/SensorManager.h>
+#ifdef DISPLAY_CLASS
+  #include <helpers/ui/ST7789LCDDisplay.h>
+  #include <helpers/ui/MomentaryButton.h>
+#endif
+
+extern TDeckBoard board;
+extern WRAPPER_CLASS radio_driver;
+extern AutoDiscoverRTCClock rtc_clock;
+extern SensorManager sensors;
+
+#ifdef DISPLAY_CLASS
+  extern DISPLAY_CLASS display;
+  extern MomentaryButton user_btn;
+#endif
+
+bool radio_init();
+uint32_t radio_get_rng_seed();
+void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
+void radio_set_tx_power(uint8_t dbm);
+mesh::LocalIdentity radio_new_identity();