Support for TBeam SX1262 board

variants/lilygo_tbeam_SX1262/platformio.ini

@@ -0,0 +1,68 @@
+[LilyGo_TBeam_SX1262]
+extends = esp32_base
+board = ttgo-t-beam
+build_flags =
+  ${esp32_base.build_flags}
+  -I variants/lilygo_tbeam_SX1262
+  -D LILYGO_TBEAM_SX1262
+  -D SX126X_DIO2_AS_RF_SWITCH=true
+  -D SX126X_DIO3_TCXO_VOLTAGE=1.8
+  -D SX126X_CURRENT_LIMIT=140
+  -D SX126X_RX_BOOSTED_GAIN=1
+  -D RADIO_CLASS=CustomSX1262
+  -D WRAPPER_CLASS=CustomSX1262Wrapper
+  -D LORA_TX_POWER=22
+  -D P_LORA_TX_LED=4
+  -D PIN_BOARD_SDA=21
+  -D PIN_BOARD_SCL=22
+  -D PIN_USER_BTN=38
+build_src_filter = ${esp32_base.build_src_filter}
+  +<../variants/lilygo_tbeam_SX1262>
+board_build.partitions = min_spiffs.csv ; get around 4mb flash limit
+lib_deps =
+  ${esp32_base.lib_deps}
+  lewisxhe/XPowersLib@^0.2.7
+  adafruit/Adafruit SSD1306 @ ^2.5.13
+
+[env:Tbeam_SX1262_companion_radio_ble]
+extends = LilyGo_TBeam_SX1262
+board_build.upload.maximum_ram_size=2000000
+build_flags =
+  ${LilyGo_TBeam_SX1262.build_flags}
+  -D DISPLAY_CLASS=SSD1306Display
+  -D MAX_CONTACTS=100
+  -D MAX_GROUP_CHANNELS=8
+  -D BLE_PIN_CODE=123456
+;  -D BLE_DEBUG_LOGGING=1
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+;  -D RADIOLIB_DEBUG_BASIC=1
+;  -D ENABLE_PRIVATE_KEY_IMPORT=1
+;  -D ENABLE_PRIVATE_KEY_EXPORT=1
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+build_src_filter = ${LilyGo_TBeam_SX1262.build_src_filter}
+  +<helpers/esp32/*.cpp>
+  +<helpers/ui/SSD1306Display.cpp>
+  +<../examples/companion_radio>
+lib_deps =
+  ${LilyGo_TBeam_SX1262.lib_deps}
+  densaugeo/base64 @ ~1.4.0
+
+[env:Tbeam_SX1262_repeater]
+extends = LilyGo_TBeam_SX1262
+build_flags =
+  ${LilyGo_TBeam_SX1262.build_flags}
+  -D DISPLAY_CLASS=SSD1306Display
+  -D ADVERT_NAME='"Tbeam SX1262 Repeater"'
+  -D ADVERT_LAT=0.0
+  -D ADVERT_LON=0.0
+  -D ADMIN_PASSWORD='"password"'
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+build_src_filter = ${LilyGo_TBeam_SX1262.build_src_filter}
+  +<helpers/ui/SSD1306Display.cpp>
+  +<../examples/simple_repeater>
+lib_deps =
+  ${LilyGo_TBeam_SX1262.lib_deps}
+  ${esp32_ota.lib_deps}

variants/lilygo_tbeam_SX1262/target.cpp

@@ -0,0 +1,65 @@
+#include <Arduino.h>
+#include "target.h"
+
+TBeamBoardSX1262 board;
+
+#if defined(P_LORA_SCLK)
+  static SPIClass spi;
+  RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, spi);
+#else
+  RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY);
+#endif
+
+WRAPPER_CLASS radio_driver(radio, board);
+
+ESP32RTCClock fallback_clock;
+AutoDiscoverRTCClock rtc_clock(fallback_clock);
+
+#ifndef LORA_CR
+  #define LORA_CR      5
+#endif
+
+bool radio_init() {
+  fallback_clock.begin();
+  rtc_clock.begin(Wire);
+  
+#ifdef SX126X_DIO3_TCXO_VOLTAGE
+  float tcxo = SX126X_DIO3_TCXO_VOLTAGE;
+#else
+  float tcxo = 1.6f;
+#endif
+
+#if defined(P_LORA_SCLK)
+  spi.begin(P_LORA_SCLK, P_LORA_MISO, P_LORA_MOSI);
+#endif
+  int status = radio.begin(LORA_FREQ, LORA_BW, LORA_SF, LORA_CR, RADIOLIB_SX126X_SYNC_WORD_PRIVATE, LORA_TX_POWER, 8, tcxo);
+  if (status != RADIOLIB_ERR_NONE) {
+    Serial.print("ERROR: radio init failed: ");
+    Serial.println(status);
+    return false;  // fail
+  }
+
+  radio.setCRC(1);
+  
+  return true;  // success
+}
+
+uint32_t radio_get_rng_seed() {
+  return radio.random(0x7FFFFFFF);
+}
+
+void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
+  radio.setFrequency(freq);
+  radio.setSpreadingFactor(sf);
+  radio.setBandwidth(bw);
+  radio.setCodingRate(cr);
+}
+
+void radio_set_tx_power(uint8_t dbm) {
+  radio.setOutputPower(dbm);
+}
+
+mesh::LocalIdentity radio_new_identity() {
+  RadioNoiseListener rng(radio);
+  return mesh::LocalIdentity(&rng);  // create new random identity
+}

variants/lilygo_tbeam_SX1262/target.h

@@ -0,0 +1,18 @@
+#pragma once
+
+#define RADIOLIB_STATIC_ONLY 1
+#include <RadioLib.h>
+#include <helpers/RadioLibWrappers.h>
+#include <helpers/TBeamBoardSX1262.h>
+#include <helpers/CustomSX1262Wrapper.h>
+#include <helpers/AutoDiscoverRTCClock.h>
+
+extern TBeamBoardSX1262 board;
+extern WRAPPER_CLASS radio_driver;
+extern AutoDiscoverRTCClock rtc_clock;
+
+bool radio_init();
+uint32_t radio_get_rng_seed();
+void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
+void radio_set_tx_power(uint8_t dbm);
+mesh::LocalIdentity radio_new_identity();