Support for TBeam SX1262 board

src/helpers/TBeamBoardSX1262.h

@@ -0,0 +1,79 @@
+#pragma once
+
+
+#include <Wire.h>
+#include <Arduino.h>
+#include "XPowersLib.h"
+
+#define XPOWERS_CHIP_AXP192
+
+// LoRa radio module pins for TBeam
+#define  P_LORA_DIO_1   33 // SX1262 IRQ pin
+#define  P_LORA_NSS     18
+#define  P_LORA_RESET   23
+#define  P_LORA_BUSY    32 // SX1262 Busy pin
+#define  P_LORA_SCLK     5
+#define  P_LORA_MISO    19
+#define  P_LORA_MOSI    27
+
+#include "ESP32Board.h"
+
+#include <driver/rtc_io.h>
+
+class TBeamBoardSX1262 : public ESP32Board {
+  XPowersAXP192 power;
+
+public:
+  void begin() {
+    ESP32Board::begin();
+
+    power.setLDO2Voltage(3300);
+    power.enableLDO2();
+
+    power.enableBattVoltageMeasure();
+
+    pinMode(38, INPUT_PULLUP);
+
+    esp_reset_reason_t reason = esp_reset_reason();
+    if (reason == ESP_RST_DEEPSLEEP) {
+      long wakeup_source = esp_sleep_get_ext1_wakeup_status();
+      if (wakeup_source & (1 << P_LORA_DIO_1)) {  // received a LoRa packet (while in deep sleep)
+        startup_reason = BD_STARTUP_RX_PACKET;
+      }
+
+      rtc_gpio_hold_dis((gpio_num_t)P_LORA_NSS);
+      rtc_gpio_deinit((gpio_num_t)P_LORA_DIO_1);
+    }
+  }
+
+  void enterDeepSleep(uint32_t secs, int pin_wake_btn = -1) {
+    esp_sleep_pd_config(ESP_PD_DOMAIN_RTC_PERIPH, ESP_PD_OPTION_ON);
+
+    // Make sure the DIO1 and NSS GPIOs are hold on required levels during deep sleep
+    rtc_gpio_set_direction((gpio_num_t)P_LORA_DIO_1, RTC_GPIO_MODE_INPUT_ONLY);
+    rtc_gpio_pulldown_en((gpio_num_t)P_LORA_DIO_1);
+
+    rtc_gpio_hold_en((gpio_num_t)P_LORA_NSS);
+
+    if (pin_wake_btn < 0) {
+      esp_sleep_enable_ext1_wakeup( (1L << P_LORA_DIO_1), ESP_EXT1_WAKEUP_ANY_HIGH);  // wake up on: recv LoRa packet
+    } else {
+      esp_sleep_enable_ext1_wakeup( (1L << P_LORA_DIO_1) | (1L << pin_wake_btn), ESP_EXT1_WAKEUP_ANY_HIGH);  // wake up on: recv LoRa packet OR wake btn
+    }
+
+    if (secs > 0) {
+      esp_sleep_enable_timer_wakeup(secs * 1000000);
+    }
+
+    // Finally set ESP32 into sleep
+    esp_deep_sleep_start();   // CPU halts here and never returns!
+  }
+
+  uint16_t getBattMilliVolts() override  {
+    return power.getBattVoltage();
+  }
+
+  const char* getManufacturerName() const override {
+    return "LilyGo T-Beam SX1262";
+  }
+};