Support for TBeam SX1262 board

src/helpers/TBeamBoardSX1262.h

@@ -0,0 +1,79 @@
+#pragma once
+
+
+#include <Wire.h>
+#include <Arduino.h>
+#include "XPowersLib.h"
+
+#define XPOWERS_CHIP_AXP192
+
+// LoRa radio module pins for TBeam
+#define  P_LORA_DIO_1   33 // SX1262 IRQ pin
+#define  P_LORA_NSS     18
+#define  P_LORA_RESET   23
+#define  P_LORA_BUSY    32 // SX1262 Busy pin
+#define  P_LORA_SCLK     5
+#define  P_LORA_MISO    19
+#define  P_LORA_MOSI    27
+
+#include "ESP32Board.h"
+
+#include <driver/rtc_io.h>
+
+class TBeamBoardSX1262 : public ESP32Board {
+  XPowersAXP192 power;
+
+public:
+  void begin() {
+    ESP32Board::begin();
+
+    power.setLDO2Voltage(3300);
+    power.enableLDO2();
+
+    power.enableBattVoltageMeasure();
+
+    pinMode(38, INPUT_PULLUP);
+
+    esp_reset_reason_t reason = esp_reset_reason();
+    if (reason == ESP_RST_DEEPSLEEP) {
+      long wakeup_source = esp_sleep_get_ext1_wakeup_status();
+      if (wakeup_source & (1 << P_LORA_DIO_1)) {  // received a LoRa packet (while in deep sleep)
+        startup_reason = BD_STARTUP_RX_PACKET;
+      }
+
+      rtc_gpio_hold_dis((gpio_num_t)P_LORA_NSS);
+      rtc_gpio_deinit((gpio_num_t)P_LORA_DIO_1);
+    }
+  }
+
+  void enterDeepSleep(uint32_t secs, int pin_wake_btn = -1) {
+    esp_sleep_pd_config(ESP_PD_DOMAIN_RTC_PERIPH, ESP_PD_OPTION_ON);
+
+    // Make sure the DIO1 and NSS GPIOs are hold on required levels during deep sleep
+    rtc_gpio_set_direction((gpio_num_t)P_LORA_DIO_1, RTC_GPIO_MODE_INPUT_ONLY);
+    rtc_gpio_pulldown_en((gpio_num_t)P_LORA_DIO_1);
+
+    rtc_gpio_hold_en((gpio_num_t)P_LORA_NSS);
+
+    if (pin_wake_btn < 0) {
+      esp_sleep_enable_ext1_wakeup( (1L << P_LORA_DIO_1), ESP_EXT1_WAKEUP_ANY_HIGH);  // wake up on: recv LoRa packet
+    } else {
+      esp_sleep_enable_ext1_wakeup( (1L << P_LORA_DIO_1) | (1L << pin_wake_btn), ESP_EXT1_WAKEUP_ANY_HIGH);  // wake up on: recv LoRa packet OR wake btn
+    }
+
+    if (secs > 0) {
+      esp_sleep_enable_timer_wakeup(secs * 1000000);
+    }
+
+    // Finally set ESP32 into sleep
+    esp_deep_sleep_start();   // CPU halts here and never returns!
+  }
+
+  uint16_t getBattMilliVolts() override  {
+    return power.getBattVoltage();
+  }
+
+  const char* getManufacturerName() const override {
+    return "LilyGo T-Beam SX1262";
+  }
+};

variants/lilygo_tbeam_SX1262/platformio.ini

@@ -0,0 +1,68 @@
+[LilyGo_TBeam_SX1262]
+extends = esp32_base
+board = ttgo-t-beam
+build_flags =
+  ${esp32_base.build_flags}
+  -I variants/lilygo_tbeam_SX1262
+  -D LILYGO_TBEAM_SX1262
+  -D SX126X_DIO2_AS_RF_SWITCH=true
+  -D SX126X_DIO3_TCXO_VOLTAGE=1.8
+  -D SX126X_CURRENT_LIMIT=140
+  -D SX126X_RX_BOOSTED_GAIN=1
+  -D RADIO_CLASS=CustomSX1262
+  -D WRAPPER_CLASS=CustomSX1262Wrapper
+  -D LORA_TX_POWER=22
+  -D P_LORA_TX_LED=4
+  -D PIN_BOARD_SDA=21
+  -D PIN_BOARD_SCL=22
+  -D PIN_USER_BTN=38
+build_src_filter = ${esp32_base.build_src_filter}
+  +<../variants/lilygo_tbeam_SX1262>
+board_build.partitions = min_spiffs.csv ; get around 4mb flash limit
+lib_deps =
+  ${esp32_base.lib_deps}
+  lewisxhe/XPowersLib@^0.2.7
+  adafruit/Adafruit SSD1306 @ ^2.5.13
+
+[env:Tbeam_SX1262_companion_radio_ble]
+extends = LilyGo_TBeam_SX1262
+board_build.upload.maximum_ram_size=2000000
+build_flags =
+  ${LilyGo_TBeam_SX1262.build_flags}
+  -D DISPLAY_CLASS=SSD1306Display
+  -D MAX_CONTACTS=100
+  -D MAX_GROUP_CHANNELS=8
+  -D BLE_PIN_CODE=123456
+;  -D BLE_DEBUG_LOGGING=1
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+;  -D RADIOLIB_DEBUG_BASIC=1
+;  -D ENABLE_PRIVATE_KEY_IMPORT=1
+;  -D ENABLE_PRIVATE_KEY_EXPORT=1
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+build_src_filter = ${LilyGo_TBeam_SX1262.build_src_filter}
+  +<helpers/esp32/*.cpp>
+  +<helpers/ui/SSD1306Display.cpp>
+  +<../examples/companion_radio>
+lib_deps =
+  ${LilyGo_TBeam_SX1262.lib_deps}
+  densaugeo/base64 @ ~1.4.0
+
+[env:Tbeam_SX1262_repeater]
+extends = LilyGo_TBeam_SX1262
+build_flags =
+  ${LilyGo_TBeam_SX1262.build_flags}
+  -D DISPLAY_CLASS=SSD1306Display
+  -D ADVERT_NAME='"Tbeam SX1262 Repeater"'
+  -D ADVERT_LAT=0.0
+  -D ADVERT_LON=0.0
+  -D ADMIN_PASSWORD='"password"'
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+build_src_filter = ${LilyGo_TBeam_SX1262.build_src_filter}
+  +<helpers/ui/SSD1306Display.cpp>
+  +<../examples/simple_repeater>
+lib_deps =
+  ${LilyGo_TBeam_SX1262.lib_deps}
+  ${esp32_ota.lib_deps}

variants/lilygo_tbeam_SX1262/target.cpp

@@ -0,0 +1,65 @@
+#include <Arduino.h>
+#include "target.h"
+
+TBeamBoardSX1262 board;
+
+#if defined(P_LORA_SCLK)
+  static SPIClass spi;
+  RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, spi);
+#else
+  RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY);
+#endif
+
+WRAPPER_CLASS radio_driver(radio, board);
+
+ESP32RTCClock fallback_clock;
+AutoDiscoverRTCClock rtc_clock(fallback_clock);
+
+#ifndef LORA_CR
+  #define LORA_CR      5
+#endif
+
+bool radio_init() {
+  fallback_clock.begin();
+  rtc_clock.begin(Wire);
+  
+#ifdef SX126X_DIO3_TCXO_VOLTAGE
+  float tcxo = SX126X_DIO3_TCXO_VOLTAGE;
+#else
+  float tcxo = 1.6f;
+#endif
+
+#if defined(P_LORA_SCLK)
+  spi.begin(P_LORA_SCLK, P_LORA_MISO, P_LORA_MOSI);
+#endif
+  int status = radio.begin(LORA_FREQ, LORA_BW, LORA_SF, LORA_CR, RADIOLIB_SX126X_SYNC_WORD_PRIVATE, LORA_TX_POWER, 8, tcxo);
+  if (status != RADIOLIB_ERR_NONE) {
+    Serial.print("ERROR: radio init failed: ");
+    Serial.println(status);
+    return false;  // fail
+  }
+
+  radio.setCRC(1);
+  
+  return true;  // success
+}
+
+uint32_t radio_get_rng_seed() {
+  return radio.random(0x7FFFFFFF);
+}
+
+void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
+  radio.setFrequency(freq);
+  radio.setSpreadingFactor(sf);
+  radio.setBandwidth(bw);
+  radio.setCodingRate(cr);
+}
+
+void radio_set_tx_power(uint8_t dbm) {
+  radio.setOutputPower(dbm);
+}
+
+mesh::LocalIdentity radio_new_identity() {
+  RadioNoiseListener rng(radio);
+  return mesh::LocalIdentity(&rng);  // create new random identity
+}

variants/lilygo_tbeam_SX1262/target.h

@@ -0,0 +1,18 @@
+#pragma once
+
+#define RADIOLIB_STATIC_ONLY 1
+#include <RadioLib.h>
+#include <helpers/RadioLibWrappers.h>
+#include <helpers/TBeamBoardSX1262.h>
+#include <helpers/CustomSX1262Wrapper.h>
+#include <helpers/AutoDiscoverRTCClock.h>
+
+extern TBeamBoardSX1262 board;
+extern WRAPPER_CLASS radio_driver;
+extern AutoDiscoverRTCClock rtc_clock;
+
+bool radio_init();
+uint32_t radio_get_rng_seed();
+void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
+void radio_set_tx_power(uint8_t dbm);
+mesh::LocalIdentity radio_new_identity();