Allow negative tx power

Like SX1262 allows -9 dBm lowest, some allow lower but that probably
isn't useful

variants/ebyte_eora_s3/target.cpp

@@ -75,7 +75,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
   radio.setCodingRate(cr);
 }
 
-void radio_set_tx_power(uint8_t dbm) {
+void radio_set_tx_power(int8_t dbm) {
   radio.setOutputPower(dbm);
 }
 

variants/ebyte_eora_s3/target.h

@@ -25,5 +25,5 @@ extern SensorManager sensors;
 bool radio_init();
 uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(uint8_t dbm);
+void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();

variants/generic-e22/target.cpp

@@ -38,7 +38,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
   radio.setCodingRate(cr);
 }
 
-void radio_set_tx_power(uint8_t dbm) {
+void radio_set_tx_power(int8_t dbm) {
   radio.setOutputPower(dbm);
 }
 

variants/generic-e22/target.h

@@ -17,5 +17,5 @@ extern SensorManager sensors;
 bool radio_init();
 uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(uint8_t dbm);
+void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();

variants/generic_espnow/target.cpp

@@ -25,7 +25,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
   // no-op
 }
 
-void radio_set_tx_power(uint8_t dbm) {
+void radio_set_tx_power(int8_t dbm) {
   radio_driver.setTxPower(dbm);
 }
 

variants/generic_espnow/target.h

@@ -12,5 +12,5 @@ extern SensorManager sensors;
 bool radio_init();
 uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(uint8_t dbm);
+void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();

variants/heltec_ct62/target.cpp

@@ -27,7 +27,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
   radio.setCodingRate(cr);
 }
 
-void radio_set_tx_power(uint8_t dbm) {
+void radio_set_tx_power(int8_t dbm) {
   radio.setOutputPower(dbm);
 }
 

variants/heltec_ct62/target.h

@@ -16,5 +16,5 @@ extern SensorManager sensors;
 bool radio_init();
 uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(uint8_t dbm);
+void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();

variants/heltec_e213/target.cpp

@@ -44,7 +44,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
   radio.setCodingRate(cr);
 }
 
-void radio_set_tx_power(uint8_t dbm) {
+void radio_set_tx_power(int8_t dbm) {
   radio.setOutputPower(dbm);
 }
 

variants/heltec_e213/target.h

@@ -25,5 +25,5 @@ extern MomentaryButton user_btn;
 bool radio_init();
 uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(uint8_t dbm);
+void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();

variants/heltec_e290/target.cpp

@@ -44,7 +44,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
   radio.setCodingRate(cr);
 }
 
-void radio_set_tx_power(uint8_t dbm) {
+void radio_set_tx_power(int8_t dbm) {
   radio.setOutputPower(dbm);
 }
 

variants/heltec_e290/target.h

@@ -25,5 +25,5 @@ extern MomentaryButton user_btn;
 bool radio_init();
 uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(uint8_t dbm);
+void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();

variants/heltec_mesh_solar/target.cpp

@@ -34,7 +34,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
   radio.setCodingRate(cr);
 }
 
-void radio_set_tx_power(uint8_t dbm) {
+void radio_set_tx_power(int8_t dbm) {
   radio.setOutputPower(dbm);
 }
 

variants/heltec_mesh_solar/target.h

@@ -42,5 +42,5 @@ extern SolarSensorManager sensors;
 bool radio_init();
 uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(uint8_t dbm);
+void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();

variants/heltec_t114/target.cpp

@@ -36,7 +36,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
   radio.setCodingRate(cr);
 }
 
-void radio_set_tx_power(uint8_t dbm) {
+void radio_set_tx_power(int8_t dbm) {
   radio.setOutputPower(dbm);
 }
 

variants/heltec_t114/target.h

@@ -50,5 +50,5 @@ extern T114SensorManager sensors;
 bool radio_init();
 uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(uint8_t dbm);
+void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();

variants/heltec_t190/target.cpp

@@ -44,7 +44,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
   radio.setCodingRate(cr);
 }
 
-void radio_set_tx_power(uint8_t dbm) {
+void radio_set_tx_power(int8_t dbm) {
   radio.setOutputPower(dbm);
 }
 

variants/heltec_t190/target.h

@@ -25,5 +25,5 @@ extern MomentaryButton user_btn;
 bool radio_init();
 uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(uint8_t dbm);
+void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();

variants/heltec_tracker/target.cpp

@@ -47,7 +47,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
   radio.setCodingRate(cr);
 }
 
-void radio_set_tx_power(uint8_t dbm) {
+void radio_set_tx_power(int8_t dbm) {
   radio.setOutputPower(dbm);
 }
 

variants/heltec_tracker/target.h

@@ -43,5 +43,5 @@ extern HWTSensorManager sensors;
 bool radio_init();
 uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(uint8_t dbm);
+void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();

variants/heltec_tracker_v2/target.cpp

@@ -50,7 +50,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
   radio.setCodingRate(cr);
 }
 
-void radio_set_tx_power(uint8_t dbm) {
+void radio_set_tx_power(int8_t dbm) {
   radio.setOutputPower(dbm);
 }
 

variants/heltec_tracker_v2/target.h

@@ -26,5 +26,5 @@ extern EnvironmentSensorManager sensors;
 bool radio_init();
 uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(uint8_t dbm);
+void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();

variants/heltec_v2/target.cpp

@@ -43,7 +43,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
   radio.setCodingRate(cr);
 }
 
-void radio_set_tx_power(uint8_t dbm) {
+void radio_set_tx_power(int8_t dbm) {
   radio.setOutputPower(dbm);
 }
 

variants/heltec_v2/target.h

@@ -25,5 +25,5 @@ extern SensorManager sensors;
 bool radio_init();
 uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(uint8_t dbm);
+void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();

variants/heltec_v3/target.cpp

@@ -50,7 +50,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
   radio.setCodingRate(cr);
 }
 
-void radio_set_tx_power(uint8_t dbm) {
+void radio_set_tx_power(int8_t dbm) {
   radio.setOutputPower(dbm);
 }
 

variants/heltec_v3/target.h

@@ -26,5 +26,5 @@ extern EnvironmentSensorManager sensors;
 bool radio_init();
 uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(uint8_t dbm);
+void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();

variants/heltec_v4/target.cpp

@@ -50,7 +50,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
   radio.setCodingRate(cr);
 }
 
-void radio_set_tx_power(uint8_t dbm) {
+void radio_set_tx_power(int8_t dbm) {
   radio.setOutputPower(dbm);
 }
 

variants/heltec_v4/target.h

@@ -30,5 +30,5 @@ extern EnvironmentSensorManager sensors;
 bool radio_init();
 uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(uint8_t dbm);
+void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();

variants/heltec_wireless_paper/target.cpp

@@ -43,7 +43,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
   radio.setCodingRate(cr);
 }
 
-void radio_set_tx_power(uint8_t dbm) {
+void radio_set_tx_power(int8_t dbm) {
   radio.setOutputPower(dbm);
 }
 

variants/heltec_wireless_paper/target.h

@@ -25,5 +25,5 @@ extern MomentaryButton user_btn;
 bool radio_init();
 uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(uint8_t dbm);
+void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();

variants/ikoka_handheld_nrf/target.cpp

@@ -36,7 +36,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
   radio.setCodingRate(cr);
 }
 
-void radio_set_tx_power(uint8_t dbm) {
+void radio_set_tx_power(int8_t dbm) {
   radio.setOutputPower(dbm);
 }
 

variants/ikoka_handheld_nrf/target.h

@@ -25,5 +25,5 @@ extern EnvironmentSensorManager sensors;
 bool radio_init();
 uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(uint8_t dbm);
+void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();

variants/ikoka_nano_nrf/target.cpp

@@ -34,7 +34,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
   radio.setCodingRate(cr);
 }
 
-void radio_set_tx_power(uint8_t dbm) {
+void radio_set_tx_power(int8_t dbm) {
   radio.setOutputPower(dbm);
 }
 

variants/ikoka_nano_nrf/target.h

@@ -24,5 +24,5 @@ extern EnvironmentSensorManager sensors;
 bool radio_init();
 uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(uint8_t dbm);
+void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();

variants/ikoka_stick_nrf/target.cpp

@@ -34,7 +34,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
   radio.setCodingRate(cr);
 }
 
-void radio_set_tx_power(uint8_t dbm) {
+void radio_set_tx_power(int8_t dbm) {
   radio.setOutputPower(dbm);
 }
 

variants/ikoka_stick_nrf/target.h

@@ -24,5 +24,5 @@ extern EnvironmentSensorManager sensors;
 bool radio_init();
 uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(uint8_t dbm);
+void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();

variants/keepteen_lt1/target.cpp

@@ -40,7 +40,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
   radio.setCodingRate(cr);
 }
 
-void radio_set_tx_power(uint8_t dbm) {
+void radio_set_tx_power(int8_t dbm) {
   radio.setOutputPower(dbm);
 }
 

variants/keepteen_lt1/target.h

@@ -26,5 +26,5 @@ extern EnvironmentSensorManager sensors;
 bool radio_init();
 uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(uint8_t dbm);
+void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();

variants/lilygo_t3s3/target.cpp

@@ -38,7 +38,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
   radio.setCodingRate(cr);
 }
 
-void radio_set_tx_power(uint8_t dbm) {
+void radio_set_tx_power(int8_t dbm) {
   radio.setOutputPower(dbm);
 }
 

variants/lilygo_t3s3/target.h

@@ -25,5 +25,5 @@ extern SensorManager sensors;
 bool radio_init();
 uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(uint8_t dbm);
+void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();

variants/lilygo_t3s3_sx1276/target.cpp

@@ -44,7 +44,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
   radio.setCodingRate(cr);
 }
 
-void radio_set_tx_power(uint8_t dbm) {
+void radio_set_tx_power(int8_t dbm) {
   radio.setOutputPower(dbm);
 }
 

variants/lilygo_t3s3_sx1276/target.h

@@ -25,5 +25,5 @@ extern SensorManager sensors;
 bool radio_init();
 uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(uint8_t dbm);
+void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();

variants/lilygo_tbeam_1w/target.cpp

@@ -54,7 +54,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
   radio.setCodingRate(cr);
 }
 
-void radio_set_tx_power(uint8_t dbm) {
+void radio_set_tx_power(int8_t dbm) {
   radio.setOutputPower(dbm);
 }
 

variants/lilygo_tbeam_1w/target.h

@@ -23,5 +23,5 @@ extern EnvironmentSensorManager sensors;
 bool radio_init();
 uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(uint8_t dbm);
+void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();

variants/lilygo_tbeam_SX1262/target.cpp

@@ -45,7 +45,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
   radio.setCodingRate(cr);
 }
 
-void radio_set_tx_power(uint8_t dbm) {
+void radio_set_tx_power(int8_t dbm) {
   radio.setOutputPower(dbm);
 }
 

variants/lilygo_tbeam_SX1262/target.h

@@ -25,5 +25,5 @@ extern EnvironmentSensorManager sensors;
 bool radio_init();
 uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(uint8_t dbm);
+void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();

variants/lilygo_tbeam_SX1276/target.cpp

@@ -50,7 +50,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
   radio.setCodingRate(cr);
 }
 
-void radio_set_tx_power(uint8_t dbm) {
+void radio_set_tx_power(int8_t dbm) {
   radio.setOutputPower(dbm);
 }
 

variants/lilygo_tbeam_SX1276/target.h

@@ -25,5 +25,5 @@ extern EnvironmentSensorManager sensors;
 bool radio_init();
 uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(uint8_t dbm);
+void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();

variants/lilygo_tbeam_supreme_SX1262/target.cpp

@@ -42,7 +42,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
   radio.setCodingRate(cr);
 }
 
-void radio_set_tx_power(uint8_t dbm) {
+void radio_set_tx_power(int8_t dbm) {
   radio.setOutputPower(dbm);
 }
 

variants/lilygo_tbeam_supreme_SX1262/target.h

@@ -23,5 +23,5 @@ extern EnvironmentSensorManager sensors;
 bool radio_init();
 uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(uint8_t dbm);
+void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();

variants/lilygo_tdeck/target.cpp

@@ -45,7 +45,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
   radio.setCodingRate(cr);
 }
 
-void radio_set_tx_power(uint8_t dbm) {
+void radio_set_tx_power(int8_t dbm) {
   radio.setOutputPower(dbm);
 }
 

variants/lilygo_tdeck/target.h

@@ -27,5 +27,5 @@ extern EnvironmentSensorManager sensors;
 bool radio_init();
 uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(uint8_t dbm);
+void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();

variants/lilygo_techo/target.cpp

@@ -42,7 +42,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
   radio.setCodingRate(cr);
 }
 
-void radio_set_tx_power(uint8_t dbm) {
+void radio_set_tx_power(int8_t dbm) {
   radio.setOutputPower(dbm);
 }
 

variants/lilygo_techo/target.h

@@ -27,5 +27,5 @@ extern EnvironmentSensorManager sensors;
 bool radio_init();
 uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(uint8_t dbm);
+void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();

variants/lilygo_techo_lite/target.cpp

@@ -41,7 +41,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
   radio.setCodingRate(cr);
 }
 
-void radio_set_tx_power(uint8_t dbm) {
+void radio_set_tx_power(int8_t dbm) {
   radio.setOutputPower(dbm);
 }
 

variants/lilygo_techo_lite/target.h

@@ -27,5 +27,5 @@ extern EnvironmentSensorManager sensors;
 bool radio_init();
 uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(uint8_t dbm);
+void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();

variants/lilygo_tlora_c6/target.cpp

@@ -38,7 +38,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
   radio.setCodingRate(cr);
 }
 
-void radio_set_tx_power(uint8_t dbm) {
+void radio_set_tx_power(int8_t dbm) {
   radio.setOutputPower(dbm);
 }
 

variants/lilygo_tlora_c6/target.h

@@ -16,5 +16,5 @@ extern SensorManager sensors;
 bool radio_init();
 uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(uint8_t dbm);
+void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();

variants/lilygo_tlora_v2_1/target.cpp

@@ -39,7 +39,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
   radio.setCodingRate(cr);
 }
 
-void radio_set_tx_power(uint8_t dbm) {
+void radio_set_tx_power(int8_t dbm) {
   radio.setOutputPower(dbm);
 }
 

variants/lilygo_tlora_v2_1/target.h

@@ -25,5 +25,5 @@ extern EnvironmentSensorManager sensors;
 bool radio_init();
 uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(uint8_t dbm);
+void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();

variants/mesh_pocket/target.cpp

@@ -34,7 +34,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
   radio.setCodingRate(cr);
 }
 
-void radio_set_tx_power(uint8_t dbm) {
+void radio_set_tx_power(int8_t dbm) {
   radio.setOutputPower(dbm);
 }
 

variants/mesh_pocket/target.h

@@ -26,7 +26,7 @@ extern AutoDiscoverRTCClock rtc_clock;
 bool radio_init();
 uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(uint8_t dbm);
+void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();
 
 extern SensorManager sensors;

variants/meshadventurer/target.cpp

@@ -41,7 +41,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
   radio.setCodingRate(cr);
 }
 
-void radio_set_tx_power(uint8_t dbm) {
+void radio_set_tx_power(int8_t dbm) {
   radio.setOutputPower(dbm);
 }
 

variants/meshadventurer/target.h

@@ -45,5 +45,5 @@ extern MASensorManager sensors;
 bool radio_init();
 uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(uint8_t dbm);
+void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();

variants/meshtiny/target.cpp

@@ -37,7 +37,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
   radio.setCodingRate(cr);
 }
 
-void radio_set_tx_power(uint8_t dbm) {
+void radio_set_tx_power(int8_t dbm) {
   radio.setOutputPower(dbm);
 }
 

variants/meshtiny/target.h

@@ -29,5 +29,5 @@ extern MomentaryButton back_btn;
 bool radio_init();
 uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(uint8_t dbm);
+void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();

variants/minewsemi_me25ls01/target.cpp

@@ -88,7 +88,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
   radio.setCodingRate(cr);
 }
 
-void radio_set_tx_power(uint8_t dbm) {
+void radio_set_tx_power(int8_t dbm) {
   radio.setOutputPower(dbm);
 }
 

variants/minewsemi_me25ls01/target.h

@@ -25,5 +25,5 @@ extern EnvironmentSensorManager sensors;
 bool radio_init();
 uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(uint8_t dbm);
+void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();

variants/nano_g2_ultra/target.cpp

@@ -36,7 +36,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
   radio.setCodingRate(cr);
 }
 
-void radio_set_tx_power(uint8_t dbm) {
+void radio_set_tx_power(int8_t dbm) {
   radio.setOutputPower(dbm);
 }
 

variants/nano_g2_ultra/target.h

@@ -45,5 +45,5 @@ extern MomentaryButton user_btn;
 bool radio_init();
 uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(uint8_t dbm);
+void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();

variants/nibble_screen_connect/target.cpp

@@ -38,7 +38,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
   radio.setCodingRate(cr);
 }
 
-void radio_set_tx_power(uint8_t dbm) {
+void radio_set_tx_power(int8_t dbm) {
   radio.setOutputPower(dbm);
 }
 

variants/nibble_screen_connect/target.h

@@ -25,6 +25,6 @@ extern SensorManager sensors;
 bool radio_init();
 uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(uint8_t dbm);
+void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();
 

variants/promicro/target.cpp

@@ -40,7 +40,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
   radio.setCodingRate(cr);
 }
 
-void radio_set_tx_power(uint8_t dbm) {
+void radio_set_tx_power(int8_t dbm) {
   radio.setOutputPower(dbm);
 }
 

variants/promicro/target.h

@@ -26,5 +26,5 @@ extern EnvironmentSensorManager sensors;
 bool radio_init();
 uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(uint8_t dbm);
+void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();

variants/rak11310/target.cpp

@@ -29,7 +29,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
   radio.setCodingRate(cr);
 }
 
-void radio_set_tx_power(uint8_t dbm) {
+void radio_set_tx_power(int8_t dbm) {
   radio.setOutputPower(dbm);
 }
 

variants/rak11310/target.h

@@ -16,5 +16,5 @@ extern SensorManager sensors;
 bool radio_init();
 uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(uint8_t dbm);
+void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();

variants/rak3112/target.cpp

@@ -50,7 +50,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
   radio.setCodingRate(cr);
 }
 
-void radio_set_tx_power(uint8_t dbm) {
+void radio_set_tx_power(int8_t dbm) {
   radio.setOutputPower(dbm);
 }
 

variants/rak3112/target.h

@@ -26,5 +26,5 @@ extern EnvironmentSensorManager sensors;
 bool radio_init();
 uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(uint8_t dbm);
+void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();

variants/rak3401/target.cpp

@@ -48,7 +48,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
   radio.setCodingRate(cr);
 }
 
-void radio_set_tx_power(uint8_t dbm) {
+void radio_set_tx_power(int8_t dbm) {
   radio.setOutputPower(dbm);
 }
 

variants/rak3401/target.h

@@ -26,5 +26,5 @@ extern EnvironmentSensorManager sensors;
 bool radio_init();
 uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(uint8_t dbm);
+void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();

variants/rak3x72/target.cpp

@@ -66,7 +66,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
   radio.setCodingRate(cr);
 }
 
-void radio_set_tx_power(uint8_t dbm) {
+void radio_set_tx_power(int8_t dbm) {
   radio.setOutputPower(dbm);
 }
 

variants/rak3x72/target.h

@@ -52,5 +52,5 @@ extern SensorManager sensors;
 bool radio_init();
 uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(uint8_t dbm);
+void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();

variants/rak4631/target.cpp

@@ -48,7 +48,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
   radio.setCodingRate(cr);
 }
 
-void radio_set_tx_power(uint8_t dbm) {
+void radio_set_tx_power(int8_t dbm) {
   radio.setOutputPower(dbm);
 }
 

variants/rak4631/target.h

@@ -26,5 +26,5 @@ extern EnvironmentSensorManager sensors;
 bool radio_init();
 uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(uint8_t dbm);
+void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();

variants/rak_wismesh_tag/target.cpp

@@ -44,7 +44,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
   radio.setCodingRate(cr);
 }
 
-void radio_set_tx_power(uint8_t dbm) {
+void radio_set_tx_power(int8_t dbm) {
   radio.setOutputPower(dbm);
 }
 

variants/rak_wismesh_tag/target.h

@@ -23,5 +23,5 @@ extern EnvironmentSensorManager sensors;
 bool radio_init();
 uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(uint8_t dbm);
+void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();

variants/rpi_picow/target.cpp

@@ -29,7 +29,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
   radio.setCodingRate(cr);
 }
 
-void radio_set_tx_power(uint8_t dbm) {
+void radio_set_tx_power(int8_t dbm) {
   radio.setOutputPower(dbm);
 }
 

variants/rpi_picow/target.h

@@ -16,5 +16,5 @@ extern SensorManager sensors;
 bool radio_init();
 uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(uint8_t dbm);
+void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();

variants/sensecap_indicator-espnow/target.cpp

@@ -37,7 +37,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
   // no-op
 }
 
-void radio_set_tx_power(uint8_t dbm) {
+void radio_set_tx_power(int8_t dbm) {
   radio_driver.setTxPower(dbm);
 }
 

variants/sensecap_indicator-espnow/target.h

@@ -25,5 +25,5 @@ extern EnvironmentSensorManager sensors;
 bool radio_init();
 uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(uint8_t dbm);
+void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();

variants/sensecap_solar/target.cpp

@@ -29,7 +29,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
   radio.setCodingRate(cr);
 }
 
-void radio_set_tx_power(uint8_t dbm) {
+void radio_set_tx_power(int8_t dbm) {
   radio.setOutputPower(dbm);
 }
 

variants/sensecap_solar/target.h

@@ -17,5 +17,5 @@ extern EnvironmentSensorManager sensors;
 bool radio_init();
 uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(uint8_t dbm);
+void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();

variants/station_g2/target.cpp

@@ -51,7 +51,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
   radio.setCodingRate(cr);
 }
 
-void radio_set_tx_power(uint8_t dbm) {
+void radio_set_tx_power(int8_t dbm) {
   radio.setOutputPower(dbm);
 }
 

variants/station_g2/target.h

@@ -26,5 +26,5 @@ extern EnvironmentSensorManager sensors;
 bool radio_init();
 uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(uint8_t dbm);
+void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();

variants/t1000-e/target.cpp

@@ -85,7 +85,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
   radio.setCodingRate(cr);
 }
 
-void radio_set_tx_power(uint8_t dbm) {
+void radio_set_tx_power(int8_t dbm) {
   radio.setOutputPower(dbm);
 }
 

variants/t1000-e/target.h

@@ -43,5 +43,5 @@ extern T1000SensorManager sensors;
 bool radio_init();
 uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(uint8_t dbm);
+void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();

variants/tenstar_c3/target.cpp

@@ -38,7 +38,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
   radio.setCodingRate(cr);
 }
 
-void radio_set_tx_power(uint8_t dbm) {
+void radio_set_tx_power(int8_t dbm) {
   radio.setOutputPower(dbm);
 }
 

variants/tenstar_c3/target.h

@@ -17,5 +17,5 @@ extern SensorManager sensors;
 bool radio_init();
 uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(uint8_t dbm);
+void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();

variants/thinknode_m1/target.cpp

@@ -35,7 +35,7 @@ void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
   radio.setCodingRate(cr);
 }
 
-void radio_set_tx_power(uint8_t dbm) {
+void radio_set_tx_power(int8_t dbm) {
   radio.setOutputPower(dbm);
 }
 

variants/thinknode_m1/target.h

@@ -45,5 +45,5 @@ extern ThinkNodeM1SensorManager sensors;
 bool radio_init();
 uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(uint8_t dbm);
+void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();