Merge remote-tracking branch 'upstream/dev' into jbrazio/2025_3f11ad35

variants/generic_espnow/platformio.ini

@@ -26,7 +26,7 @@ build_src_filter = ${esp32_base.build_src_filter}
 extends = Generic_ESPNOW
 build_flags =
   ${Generic_ESPNOW.build_flags}
-  -D MAX_CONTACTS=100
+  -D MAX_CONTACTS=300
   -D MAX_GROUP_CHANNELS=1
 build_src_filter = ${Generic_ESPNOW.build_src_filter}
   +<../examples/simple_secure_chat/main.cpp>
@@ -54,7 +54,7 @@ lib_deps =
 extends = Generic_ESPNOW
 build_flags =
   ${Generic_ESPNOW.build_flags}
-  -D MAX_CONTACTS=100
+  -D MAX_CONTACTS=300
   -D MAX_GROUP_CHANNELS=8
 ; NOTE: DO NOT ENABLE -->  -D MESH_PACKET_LOGGING=1
 ; NOTE: DO NOT ENABLE -->  -D MESH_DEBUG=1

variants/heltec_ct62/platformio.ini

@@ -55,7 +55,7 @@ build_flags =
   ${Heltec_ct62.build_flags}
 ;  -D ARDUINO_USB_MODE=1
 ;  -D ARDUINO_USB_CDC_ON_BOOT=1
-  -D MAX_CONTACTS=100
+  -D MAX_CONTACTS=300
   -D MAX_GROUP_CHANNELS=8
   -D OFFLINE_QUEUE_SIZE=256
 ;  -D MESH_PACKET_LOGGING=1
@@ -73,7 +73,7 @@ build_flags =
   ${Heltec_ct62.build_flags}
 ;  -D ARDUINO_USB_MODE=1
 ;  -D ARDUINO_USB_CDC_ON_BOOT=1
-  -D MAX_CONTACTS=100
+  -D MAX_CONTACTS=300
   -D MAX_GROUP_CHANNELS=8
   -D OFFLINE_QUEUE_SIZE=256
   -D BLE_PIN_CODE=123456

variants/heltec_tracker/platformio.ini

@@ -43,7 +43,7 @@ build_flags =
   -D ARDUINO_USB_CDC_ON_BOOT=1      ; need for Serial
   -D DISPLAY_ROTATION=1
   -D DISPLAY_CLASS=ST7735Display
-  -D MAX_CONTACTS=100
+  -D MAX_CONTACTS=300
   -D MAX_GROUP_CHANNELS=8
   -D BLE_PIN_CODE=123456 ; HWT will use display for pin
   -D OFFLINE_QUEUE_SIZE=256

variants/heltec_v2/platformio.ini

@@ -64,7 +64,7 @@ lib_deps =
 extends = Heltec_lora32_v2
 build_flags =
   ${Heltec_lora32_v2.build_flags}
-  -D MAX_CONTACTS=100
+  -D MAX_CONTACTS=170
   -D MAX_GROUP_CHANNELS=1
 ;  -D MESH_PACKET_LOGGING=1
 ;  -D MESH_DEBUG=1
@@ -80,7 +80,7 @@ build_flags =
   ${Heltec_lora32_v2.build_flags}
   -I examples/companion_radio/ui-new
   -D DISPLAY_CLASS=SSD1306Display
-  -D MAX_CONTACTS=100
+  -D MAX_CONTACTS=170
   -D MAX_GROUP_CHANNELS=8
 ; NOTE: DO NOT ENABLE -->  -D MESH_PACKET_LOGGING=1
 ; NOTE: DO NOT ENABLE -->  -D MESH_DEBUG=1
@@ -100,7 +100,7 @@ build_flags =
   ${Heltec_lora32_v2.build_flags}
   -I examples/companion_radio/ui-new
   -D DISPLAY_CLASS=SSD1306Display
-  -D MAX_CONTACTS=100
+  -D MAX_CONTACTS=170
   -D MAX_GROUP_CHANNELS=8
   -D BLE_PIN_CODE=123456
   -D BLE_DEBUG_LOGGING=1

variants/heltec_v3/platformio.ini

@@ -94,7 +94,7 @@ lib_deps =
 extends = Heltec_lora32_v3
 build_flags =
   ${Heltec_lora32_v3.build_flags}
-  -D MAX_CONTACTS=100
+  -D MAX_CONTACTS=300
   -D MAX_GROUP_CHANNELS=1
 ;  -D MESH_PACKET_LOGGING=1
 ;  -D MESH_DEBUG=1
@@ -109,7 +109,7 @@ extends = Heltec_lora32_v3
 build_flags =
   ${Heltec_lora32_v3.build_flags}
   -I examples/companion_radio/ui-new
-  -D MAX_CONTACTS=100
+  -D MAX_CONTACTS=300
   -D MAX_GROUP_CHANNELS=8
   -D DISPLAY_CLASS=SSD1306Display
 ; NOTE: DO NOT ENABLE -->  -D MESH_PACKET_LOGGING=1
@@ -151,7 +151,8 @@ lib_deps =
 extends = Heltec_lora32_v3
 build_flags =
   ${Heltec_lora32_v3.build_flags}
-  -D MAX_CONTACTS=100
+  -I examples/companion_radio/ui-new
+  -D MAX_CONTACTS=300
   -D MAX_GROUP_CHANNELS=8
   -D DISPLAY_CLASS=SSD1306Display
   -D WIFI_DEBUG_LOGGING=1
@@ -163,7 +164,8 @@ build_src_filter = ${Heltec_lora32_v3.build_src_filter}
   +<helpers/ui/SSD1306Display.cpp>
   +<helpers/ui/MomentaryButton.cpp>
   +<helpers/esp32/*.cpp>
-  +<../examples/companion_radio>
+  +<../examples/companion_radio/*.cpp>
+  +<../examples/companion_radio/ui-new/*.cpp>
 lib_deps =
   ${Heltec_lora32_v3.lib_deps}
   densaugeo/base64 @ ~1.4.0
@@ -227,7 +229,7 @@ lib_deps =
 extends = Heltec_lora32_v3
 build_flags =
   ${Heltec_lora32_v3.build_flags}
-  -D MAX_CONTACTS=100
+  -D MAX_CONTACTS=300
   -D MAX_GROUP_CHANNELS=8
   -D BLE_PIN_CODE=123456
   -D BLE_DEBUG_LOGGING=1

variants/heltec_vision_master_e213/platformio.ini

@@ -28,7 +28,7 @@ build_flags =
   -D DISP_MOSI=6
   -D Vision_Master_E213
 build_src_filter = ${esp32_base.build_src_filter}
-  +<../variants/heltec_vision_master_e213>    
+  +<../variants/heltec_vision_master_e213>
 lib_deps =
   ${esp32_base.lib_deps}
   https://github.com/Quency-D/heltec-eink-modules/archive/563dd41fd850a1bc3039b8723da4f3a20fe1c800.zip
@@ -37,7 +37,8 @@ lib_deps =
 extends = Heltec_Vision_Master_E213_base
 build_flags =
   ${Heltec_Vision_Master_E213_base.build_flags}
-  -D MAX_CONTACTS=100
+  -I examples/companion_radio/ui-new
+  -D MAX_CONTACTS=300
   -D MAX_GROUP_CHANNELS=8
   -D DISPLAY_CLASS=E213Display
   -D BLE_PIN_CODE=123456   ; dynamic, random PIN
@@ -46,7 +47,8 @@ build_flags =
 build_src_filter = ${Heltec_Vision_Master_E213_base.build_src_filter}
   +<helpers/ui/E213Display.cpp>
   +<helpers/esp32/*.cpp>
-  +<../examples/companion_radio>
+  +<../examples/companion_radio/*.cpp>
+  +<../examples/companion_radio/ui-new/*.cpp>
 lib_deps =
   ${Heltec_Vision_Master_E213_base.lib_deps}
   densaugeo/base64 @ ~1.4.0

variants/heltec_vision_master_e213/target.cpp

@@ -19,6 +19,7 @@ SensorManager sensors;
 
 #ifdef DISPLAY_CLASS
 DISPLAY_CLASS display;
+MomentaryButton user_btn(PIN_USER_BTN, 1000, true);
 #endif
 
 bool radio_init() {

variants/heltec_vision_master_e213/target.h

@@ -9,6 +9,7 @@
 #include <helpers/SensorManager.h>
 #ifdef DISPLAY_CLASS
 #include <helpers/ui/E213Display.h>
+#include <helpers/ui/MomentaryButton.h>
 #endif
 
 extern HeltecE213Board board;
@@ -18,6 +19,7 @@ extern SensorManager sensors;
 
 #ifdef DISPLAY_CLASS
 extern DISPLAY_CLASS display;
+extern MomentaryButton user_btn;
 #endif
 
 bool radio_init();

variants/heltec_vision_master_e290/platformio.ini

@@ -22,7 +22,7 @@ build_flags =
   -D PIN_BOARD_SCL=38
   -D Vision_Master_E290
 build_src_filter = ${esp32_base.build_src_filter}
-  +<../variants/heltec_vision_master_e290>    
+  +<../variants/heltec_vision_master_e290>
 lib_deps =
   ${esp32_base.lib_deps}
   https://github.com/Quency-D/heltec-eink-modules/archive/563dd41fd850a1bc3039b8723da4f3a20fe1c800.zip
@@ -31,7 +31,8 @@ lib_deps =
 extends = Heltec_Vision_Master_E290_base
 build_flags =
   ${Heltec_Vision_Master_E290_base.build_flags}
-  -D MAX_CONTACTS=100
+  -I examples/companion_radio/ui-new
+  -D MAX_CONTACTS=300
   -D MAX_GROUP_CHANNELS=8
   -D DISPLAY_CLASS=E290Display
   -D BLE_PIN_CODE=123456   ; dynamic, random PIN
@@ -40,7 +41,8 @@ build_flags =
 build_src_filter = ${Heltec_Vision_Master_E290_base.build_src_filter}
   +<helpers/ui/E290Display.cpp>
   +<helpers/esp32/*.cpp>
-  +<../examples/companion_radio>
+  +<../examples/companion_radio/*.cpp>
+  +<../examples/companion_radio/ui-new/*.cpp>
 lib_deps =
   ${Heltec_Vision_Master_E290_base.lib_deps}
   densaugeo/base64 @ ~1.4.0

variants/heltec_vision_master_e290/target.cpp

@@ -19,6 +19,7 @@ SensorManager sensors;
 
 #ifdef DISPLAY_CLASS
 DISPLAY_CLASS display;
+MomentaryButton user_btn(PIN_USER_BTN, 1000, true);
 #endif
 
 bool radio_init() {

variants/heltec_vision_master_e290/target.h

@@ -9,6 +9,7 @@
 #include <helpers/SensorManager.h>
 #ifdef DISPLAY_CLASS
 #include <helpers/ui/E290Display.h>
+#include <helpers/ui/MomentaryButton.h>
 #endif
 
 extern HeltecE290Board board;
@@ -18,6 +19,7 @@ extern SensorManager sensors;
 
 #ifdef DISPLAY_CLASS
 extern DISPLAY_CLASS display;
+extern MomentaryButton user_btn;
 #endif
 
 bool radio_init();

variants/heltec_vision_master_t190/HeltecT190Board.cpp

@@ -0,0 +1,69 @@
+#include "HeltecT190Board.h"
+
+void HeltecT190Board::begin() {
+    ESP32Board::begin();
+
+    pinMode(PIN_ADC_CTRL, OUTPUT);
+    digitalWrite(PIN_ADC_CTRL, LOW); // Initially inactive
+
+    periph_power.begin();
+
+    esp_reset_reason_t reason = esp_reset_reason();
+    if (reason == ESP_RST_DEEPSLEEP) {
+      long wakeup_source = esp_sleep_get_ext1_wakeup_status();
+      if (wakeup_source & (1 << P_LORA_DIO_1)) {  // received a LoRa packet (while in deep sleep)
+        startup_reason = BD_STARTUP_RX_PACKET;
+      }
+
+      rtc_gpio_hold_dis((gpio_num_t)P_LORA_NSS);
+      rtc_gpio_deinit((gpio_num_t)P_LORA_DIO_1);
+    }
+  }
+
+  void HeltecT190Board::enterDeepSleep(uint32_t secs, int pin_wake_btn) {
+    esp_sleep_pd_config(ESP_PD_DOMAIN_RTC_PERIPH, ESP_PD_OPTION_ON);
+
+    // Make sure the DIO1 and NSS GPIOs are hold on required levels during deep sleep 
+    rtc_gpio_set_direction((gpio_num_t)P_LORA_DIO_1, RTC_GPIO_MODE_INPUT_ONLY);
+    rtc_gpio_pulldown_en((gpio_num_t)P_LORA_DIO_1);
+
+    rtc_gpio_hold_en((gpio_num_t)P_LORA_NSS);
+
+    if (pin_wake_btn < 0) {
+      esp_sleep_enable_ext1_wakeup( (1L << P_LORA_DIO_1), ESP_EXT1_WAKEUP_ANY_HIGH);  // wake up on: recv LoRa packet
+    } else {
+      esp_sleep_enable_ext1_wakeup( (1L << P_LORA_DIO_1) | (1L << pin_wake_btn), ESP_EXT1_WAKEUP_ANY_HIGH);  // wake up on: recv LoRa packet OR wake btn
+    }
+
+    if (secs > 0) {
+      esp_sleep_enable_timer_wakeup(secs * 1000000);
+    }
+
+    // Finally set ESP32 into sleep
+    esp_deep_sleep_start();   // CPU halts here and never returns!
+  }
+
+  void HeltecT190Board::powerOff()  {
+    // TODO: re-enable this when there is a definite wake-up source pin:
+    //  enterDeepSleep(0);
+  }
+
+  uint16_t HeltecT190Board::getBattMilliVolts()  {
+    analogReadResolution(10);
+    digitalWrite(PIN_ADC_CTRL, HIGH);
+    delay(10);
+    uint32_t raw = 0;
+    for (int i = 0; i < 8; i++) {
+      raw += analogRead(PIN_VBAT_READ);
+    }
+    raw = raw / 8;
+
+    digitalWrite(PIN_ADC_CTRL, LOW);
+
+    return (5.42 * (3.3 / 1024.0) * raw) * 1000;
+  }
+
+  const char* HeltecT190Board::getManufacturerName() const {
+    return "Heltec T190";
+  }
+

variants/heltec_vision_master_t190/HeltecT190Board.h

@@ -0,0 +1,30 @@
+#pragma once
+
+#include <Arduino.h>
+#include <helpers/RefCountedDigitalPin.h>
+#include <helpers/ESP32Board.h>
+#include <driver/rtc_io.h>
+
+// LoRa radio module pins for heltec_vision_master_e290 
+#define  P_LORA_DIO_1   14
+#define  P_LORA_NSS      8
+#define  P_LORA_RESET   12
+#define  P_LORA_BUSY    13
+#define  P_LORA_SCLK     9
+#define  P_LORA_MISO    11
+#define  P_LORA_MOSI    10
+
+class HeltecT190Board : public ESP32Board {
+
+public:
+  RefCountedDigitalPin periph_power;
+
+  HeltecT190Board() : periph_power(PIN_VEXT_EN,PIN_VEXT_EN_ACTIVE) { }
+
+  void begin();
+  void enterDeepSleep(uint32_t secs, int pin_wake_btn = -1);
+  void powerOff() override;
+  uint16_t getBattMilliVolts() override;
+  const char* getManufacturerName() const override ;
+
+};

variants/heltec_vision_master_t190/pins_arduino.h

@@ -0,0 +1,61 @@
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <stdint.h>
+
+static const uint8_t LED_BUILTIN = 45; // LED is not populated on earliest board variant
+#define BUILTIN_LED LED_BUILTIN        // Backward compatibility
+#define LED_BUILTIN LED_BUILTIN
+
+static const uint8_t TX = 43;
+static const uint8_t RX = 44;
+
+static const uint8_t SDA = 2;
+static const uint8_t SCL = 1;
+
+static const uint8_t SS = 8;
+static const uint8_t MOSI = 10;
+static const uint8_t MISO = 11;
+static const uint8_t SCK = 9;
+
+static const uint8_t A0 = 1;
+static const uint8_t A1 = 2;
+static const uint8_t A2 = 3;
+static const uint8_t A3 = 4;
+static const uint8_t A4 = 5;
+static const uint8_t A5 = 6;
+static const uint8_t A6 = 7;
+static const uint8_t A7 = 8;
+static const uint8_t A8 = 9;
+static const uint8_t A9 = 10;
+static const uint8_t A10 = 11;
+static const uint8_t A11 = 12;
+static const uint8_t A12 = 13;
+static const uint8_t A13 = 14;
+static const uint8_t A14 = 15;
+static const uint8_t A15 = 16;
+static const uint8_t A16 = 17;
+static const uint8_t A17 = 18;
+static const uint8_t A18 = 19;
+static const uint8_t A19 = 20;
+
+static const uint8_t T1 = 1;
+static const uint8_t T2 = 2;
+static const uint8_t T3 = 3;
+static const uint8_t T4 = 4;
+static const uint8_t T5 = 5;
+static const uint8_t T6 = 6;
+static const uint8_t T7 = 7;
+static const uint8_t T8 = 8;
+static const uint8_t T9 = 9;
+static const uint8_t T10 = 10;
+static const uint8_t T11 = 11;
+static const uint8_t T12 = 12;
+static const uint8_t T13 = 13;
+static const uint8_t T14 = 14;
+
+static const uint8_t RST_LoRa = 12;
+static const uint8_t BUSY_LoRa = 13;
+static const uint8_t DIO1 = 14;
+
+#endif /* Pins_Arduino_h */

variants/heltec_vision_master_t190/platformio.ini

@@ -0,0 +1,87 @@
+[Heltec_Vision_Master_T190_base]
+extends = esp32_base
+board = heltec_vision_master_t190
+build_flags =
+  ${esp32_base.build_flags}
+  -I variants/heltec_vision_master_t190
+  -I src/helpers/ui
+  -D HELTEC_VISION_MASTER_T190
+  -D RADIO_CLASS=CustomSX1262
+  -D WRAPPER_CLASS=CustomSX1262Wrapper
+  -D LORA_TX_POWER=22
+  -D PIN_USER_BTN=0
+  -D PIN_VEXT_EN=5
+  -D PIN_VEXT_EN_ACTIVE=HIGH
+  -D PIN_VBAT_READ=6
+  -D PIN_ADC_CTRL=46
+  -D SX126X_DIO2_AS_RF_SWITCH=true
+  -D SX126X_DIO3_TCXO_VOLTAGE=1.8
+  -D SX126X_CURRENT_LIMIT=140
+  -D SX126X_RX_BOOSTED_GAIN=1
+  -D PIN_BOARD_SDA=2
+  -D PIN_BOARD_SCL=1
+  -D PIN_TFT_SCL=38
+  -D PIN_TFT_SDA=48
+  -D PIN_TFT_RST=40
+  -D PIN_TFT_VDD_CTL=7
+  -D PIN_TFT_LEDA_CTL=17
+  -D PIN_TFT_LEDA_CTL_ACTIVE=HIGH
+  -D PIN_TFT_CS=39
+  -D PIN_TFT_DC=47
+  -D ST7789
+  -D DISPLAY_CLASS=ST7789Display
+build_src_filter = ${esp32_base.build_src_filter}
+  +<../variants/heltec_vision_master_t190>
+  +<helpers/*.cpp>
+  +<helpers/ui/ST7789Display.cpp>
+  +<helpers/ui/OLEDDisplay.cpp>
+  +<helpers/ui/OLEDDisplayFonts.cpp>
+lib_deps =
+  ${esp32_base.lib_deps}
+  adafruit/Adafruit GFX Library @ ^1.12.1
+
+[env:Heltec_Vision_Master_T190_radio_ble]
+extends = Heltec_Vision_Master_T190_base
+build_flags =
+  ${Heltec_Vision_Master_T190_base.build_flags}
+  -I examples/companion_radio/ui-new
+  -D MAX_CONTACTS=300
+  -D MAX_GROUP_CHANNELS=8
+  -D BLE_PIN_CODE=123456   ; dynamic, random PIN
+  -D BLE_DEBUG_LOGGING=1
+  -D OFFLINE_QUEUE_SIZE=256
+build_src_filter = ${Heltec_Vision_Master_T190_base.build_src_filter}
+  +<helpers/esp32/*.cpp>
+  +<../examples/companion_radio/*.cpp>
+  +<../examples/companion_radio/ui-new/*.cpp>
+lib_deps =
+  ${Heltec_Vision_Master_T190_base.lib_deps}
+  densaugeo/base64 @ ~1.4.0
+
+[env:Heltec_Vision_Master_T190_repeater]
+extends = Heltec_Vision_Master_T190_base
+build_flags =
+  ${Heltec_Vision_Master_T190_base.build_flags}
+  -D ADVERT_NAME='"Heltec T190 Repeater"'
+  -D ADVERT_LAT=0.0
+  -D ADVERT_LON=0.0
+build_src_filter = ${Heltec_Vision_Master_T190_base.build_src_filter}
+  +<../examples/simple_repeater>
+lib_deps =
+  ${Heltec_Vision_Master_T190_base.lib_deps}
+  ${esp32_ota.lib_deps}
+
+[env:Heltec_Vision_Master_T190_room_server]
+extends = Heltec_Vision_Master_T190_base
+build_flags =
+  ${Heltec_Vision_Master_T190_base.build_flags}
+  -D ADVERT_NAME='"Heltec T190 Room"'
+  -D ADVERT_LAT=0.0
+  -D ADVERT_LON=0.0
+  -D ADMIN_PASSWORD='"password"'
+  -D ROOM_PASSWORD='"hello"'
+build_src_filter = ${Heltec_Vision_Master_T190_base.build_src_filter}
+  +<../examples/simple_room_server>
+lib_deps =
+  ${Heltec_Vision_Master_T190_base.lib_deps}
+  ${esp32_ota.lib_deps}

variants/heltec_vision_master_t190/target.cpp

@@ -0,0 +1,54 @@
+#include "target.h"
+#include <Arduino.h>
+
+HeltecT190Board board;
+
+#if defined(P_LORA_SCLK)
+  static SPIClass spi(FSPI);
+  RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, spi);
+#else
+  RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY);
+#endif
+
+WRAPPER_CLASS radio_driver(radio, board);
+
+ESP32RTCClock fallback_clock;
+AutoDiscoverRTCClock rtc_clock(fallback_clock);
+
+SensorManager sensors;
+
+#ifdef DISPLAY_CLASS
+DISPLAY_CLASS display;
+MomentaryButton user_btn(PIN_USER_BTN, 1000, true);
+#endif
+
+bool radio_init() {
+  fallback_clock.begin();
+  rtc_clock.begin(Wire);
+
+#if defined(P_LORA_SCLK)
+  return radio.std_init(&spi);
+#else
+  return radio.std_init();
+#endif
+}
+
+uint32_t radio_get_rng_seed() {
+  return radio.random(0x7FFFFFFF);
+}
+
+void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
+  radio.setFrequency(freq);
+  radio.setSpreadingFactor(sf);
+  radio.setBandwidth(bw);
+  radio.setCodingRate(cr);
+}
+
+void radio_set_tx_power(uint8_t dbm) {
+  radio.setOutputPower(dbm);
+}
+
+mesh::LocalIdentity radio_new_identity() {
+  RadioNoiseListener rng(radio);
+  return mesh::LocalIdentity(&rng); // create new random identity
+}

variants/heltec_vision_master_t190/target.h

@@ -0,0 +1,29 @@
+#pragma once
+
+#define RADIOLIB_STATIC_ONLY 1
+#include <RadioLib.h>
+#include <helpers/radiolib/RadioLibWrappers.h>
+#include <HeltecT190Board.h>
+#include <helpers/radiolib/CustomSX1262Wrapper.h>
+#include <helpers/AutoDiscoverRTCClock.h>
+#include <helpers/SensorManager.h>
+#ifdef DISPLAY_CLASS
+#include <helpers/ui/ST7789Display.h>
+#include <helpers/ui/MomentaryButton.h>
+#endif
+
+extern HeltecT190Board board;
+extern WRAPPER_CLASS radio_driver;
+extern AutoDiscoverRTCClock rtc_clock;
+extern SensorManager sensors;
+
+#ifdef DISPLAY_CLASS
+extern DISPLAY_CLASS display;
+extern MomentaryButton user_btn;
+#endif
+
+bool radio_init();
+uint32_t radio_get_rng_seed();
+void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
+void radio_set_tx_power(uint8_t dbm);
+mesh::LocalIdentity radio_new_identity();

variants/heltec_wireless_paper/platformio.ini

@@ -28,7 +28,7 @@ build_flags =
   -D ARDUINO_heltec_wifi_lora_32_V3
   -D WIRELESS_PAPER
 build_src_filter = ${esp32_base.build_src_filter}
-  +<../variants/heltec_wireless_paper>    
+  +<../variants/heltec_wireless_paper>
 lib_deps =
   ${esp32_base.lib_deps}
   https://github.com/todd-herbert/heltec-eink-modules/archive/9207eb6ab2b96f66298e0488740218c17b006af7.zip
@@ -37,7 +37,8 @@ lib_deps =
 extends = Heltec_Wireless_Paper_base
 build_flags =
   ${Heltec_Wireless_Paper_base.build_flags}
-  -D MAX_CONTACTS=100
+  -I examples/companion_radio/ui-new
+  -D MAX_CONTACTS=300
   -D MAX_GROUP_CHANNELS=8
   -D DISPLAY_CLASS=E213Display
   -D BLE_PIN_CODE=123456   ; dynamic, random PIN
@@ -46,7 +47,8 @@ build_flags =
 build_src_filter = ${Heltec_Wireless_Paper_base.build_src_filter}
   +<helpers/ui/E213Display.cpp>
   +<helpers/esp32/*.cpp>
-  +<../examples/companion_radio>
+  +<../examples/companion_radio/*.cpp>
+  +<../examples/companion_radio/ui-new/*.cpp>
 lib_deps =
   ${Heltec_Wireless_Paper_base.lib_deps}
   densaugeo/base64 @ ~1.4.0

variants/heltec_wireless_paper/target.cpp

@@ -19,6 +19,7 @@ SensorManager sensors;
 
 #ifdef DISPLAY_CLASS
 DISPLAY_CLASS display;
+MomentaryButton user_btn(PIN_USER_BTN, 1000, true);
 #endif
 
 bool radio_init() {

variants/heltec_wireless_paper/target.h

@@ -9,6 +9,7 @@
 #include <helpers/SensorManager.h>
 #ifdef DISPLAY_CLASS
 #include <helpers/ui/E213Display.h>
+#include <helpers/ui/MomentaryButton.h>
 #endif
 
 extern HeltecV3Board board;
@@ -18,6 +19,7 @@ extern SensorManager sensors;
 
 #ifdef DISPLAY_CLASS
 extern DISPLAY_CLASS display;
+extern MomentaryButton user_btn;
 #endif
 
 bool radio_init();

variants/ikoka_stick_nrf/ikoka_stick_nrf_board.h

@@ -5,20 +5,6 @@
 
 #ifdef XIAO_NRF52
 
-// redefine lora pins if using the S3 variant of SX1262 board
-#ifdef SX1262_XIAO_S3_VARIANT
-  #undef P_LORA_DIO_1
-  #undef P_LORA_BUSY
-  #undef P_LORA_RESET
-  #undef P_LORA_NSS
-  #undef SX126X_RXEN
-  #define  P_LORA_DIO_1       D0
-  #define  P_LORA_BUSY        D1
-  #define  P_LORA_RESET       D2
-  #define  P_LORA_NSS         D3
-  #define  SX126X_RXEN        D4
-#endif
-
 class ikoka_stick_nrf_board : public mesh::MainBoard {
 protected:
   uint8_t startup_reason;
@@ -29,10 +15,10 @@ public:
 
 #if defined(P_LORA_TX_LED)
   void onBeforeTransmit() override {
-    digitalWrite(P_LORA_TX_LED, HIGH);   // turn TX LED on
+    digitalWrite(P_LORA_TX_LED, LOW);   // turn TX LED on
   }
   void onAfterTransmit() override {
-    digitalWrite(P_LORA_TX_LED, LOW);   // turn TX LED off
+    digitalWrite(P_LORA_TX_LED, HIGH);   // turn TX LED off
   }
 #endif
 

variants/ikoka_stick_nrf/platformio.ini

@@ -19,11 +19,10 @@ lib_deps =
   adafruit/Adafruit INA3221 Library @ ^1.0.1
   adafruit/Adafruit INA219 @ ^1.2.3
   adafruit/Adafruit AHTX0 @ ^2.0.5
-  adafruit/Adafruit BME280 Library @ ^2.3.0  
+  adafruit/Adafruit BME280 Library @ ^2.3.0
   adafruit/Adafruit SSD1306 @ ^2.5.13
 
-
-[ikoka_stick_nrf]
+[ikoka_stick_nrf_baseboard]
 extends = nrf52840_xiao
 ;board_build.ldscript = boards/nrf52840_s140_v7.ld
 build_flags = ${nrf52840_xiao.build_flags}
@@ -34,7 +33,6 @@ build_flags = ${nrf52840_xiao.build_flags}
   -D DISPLAY_ROTATION=2
   -D RADIO_CLASS=CustomSX1262
   -D WRAPPER_CLASS=CustomSX1262Wrapper
-  -D LORA_TX_POWER=9
   -D P_LORA_DIO_1=D1
   -D P_LORA_RESET=D2
   -D P_LORA_BUSY=D3
@@ -52,19 +50,59 @@ build_flags = ${nrf52840_xiao.build_flags}
   -D ENV_INCLUDE_BME280=1
   -D ENV_INCLUDE_INA3221=1
   -D ENV_INCLUDE_INA219=1
+debug_tool = jlink
+upload_protocol = nrfutil
+
+
+;;; abstracted hardware variants
+
+[ikoka_stick_nrf_e22_22dbm]
+extends = ikoka_stick_nrf_baseboard
+; No PA in this model, full 22dBm
+build_flags =
+  ${ikoka_stick_nrf_baseboard.build_flags}
+  -D LORA_TX_POWER=22
 build_src_filter = ${nrf52840_xiao.build_src_filter}
   +<helpers/*.cpp>
   +<helpers/sensors>
   +<helpers/ui/MomentaryButton.cpp>
   +<helpers/ui/SSD1306Display.cpp>
   +<../variants/ikoka_stick_nrf>
-debug_tool = jlink
-upload_protocol = nrfutil
 
-[env:ikoka_stick_nrf_companion_radio_ble]
-extends = ikoka_stick_nrf
+[ikoka_stick_nrf_e22_30dbm]
+extends = ikoka_stick_nrf_baseboard
+; limit txpower to 20dBm on E22-900M30S. Anything higher will
+; cause distortion in the PA output. 20dBm in -> 30dBm out
 build_flags =
-  ${ikoka_stick_nrf.build_flags}
+  ${ikoka_stick_nrf_baseboard.build_flags}
+  -D LORA_TX_POWER=20
+build_src_filter = ${nrf52840_xiao.build_src_filter}
+  +<helpers/*.cpp>
+  +<helpers/sensors>
+  +<helpers/ui/MomentaryButton.cpp>
+  +<helpers/ui/SSD1306Display.cpp>
+  +<../variants/ikoka_stick_nrf>
+
+[ikoka_stick_nrf_e22_33dbm]
+extends = ikoka_stick_nrf_baseboard
+; limit txpower to 9dBm on E22-900M33S to avoid hardware damage
+; to the rf amplifier frontend. 9dBm in -> 33dBm out
+build_flags =
+  ${ikoka_stick_nrf_baseboard.build_flags}
+  -D LORA_TX_POWER=9
+build_src_filter = ${nrf52840_xiao.build_src_filter}
+  +<helpers/*.cpp>
+  +<helpers/sensors>
+  +<helpers/ui/MomentaryButton.cpp>
+  +<helpers/ui/SSD1306Display.cpp>
+  +<../variants/ikoka_stick_nrf>
+
+;;; abstracted firmware roles
+
+[ikoka_stick_nrf_companion_radio_ble]
+extends = ikoka_stick_nrf_baseboard
+build_flags =
+  ${ikoka_stick_nrf_baseboard.build_flags}
   -D MAX_CONTACTS=100
   -D MAX_GROUP_CHANNELS=8
   -D BLE_PIN_CODE=123456
@@ -73,35 +111,35 @@ build_flags =
 ;  -D BLE_DEBUG_LOGGING=1
 ;  -D MESH_PACKET_LOGGING=1
 ;  -D MESH_DEBUG=1
-build_src_filter = ${ikoka_stick_nrf.build_src_filter}
+build_src_filter = ${ikoka_stick_nrf_baseboard.build_src_filter}
   +<helpers/nrf52/SerialBLEInterface.cpp>
   +<../examples/companion_radio/*.cpp>
   +<../examples/companion_radio/ui-new/*.cpp>
 lib_deps =
-  ${ikoka_stick_nrf.lib_deps}
+  ${ikoka_stick_nrf_baseboard.lib_deps}
   densaugeo/base64 @ ~1.4.0
 
-[env:ikoka_stick_nrf_companion_radio_usb]
-extends = ikoka_stick_nrf
+[ikoka_stick_nrf_companion_radio_usb]
+extends = ikoka_stick_nrf_baseboard
 build_flags =
-  ${ikoka_stick_nrf.build_flags}
+  ${ikoka_stick_nrf_baseboard.build_flags}
   -D MAX_CONTACTS=100
   -D MAX_GROUP_CHANNELS=8
   -I examples/companion_radio/ui-new
 ;  -D MESH_PACKET_LOGGING=1
 ;  -D MESH_DEBUG=1
-build_src_filter = ${ikoka_stick_nrf.build_src_filter}
+build_src_filter = ${ikoka_stick_nrf_baseboard.build_src_filter}
   +<helpers/nrf52/SerialBLEInterface.cpp>
   +<../examples/companion_radio/*.cpp>
   +<../examples/companion_radio/ui-new/*.cpp>
 lib_deps =
-  ${ikoka_stick_nrf.lib_deps}
+  ${ikoka_stick_nrf_baseboard.lib_deps}
   densaugeo/base64 @ ~1.4.0
 
-[env:ikoka_stick_nrf_repeater]
-extends = ikoka_stick_nrf
+[ikoka_stick_nrf_repeater]
+extends = ikoka_stick_nrf_baseboard
 build_flags =
-  ${ikoka_stick_nrf.build_flags}
+  ${ikoka_stick_nrf_baseboard.build_flags}
   -D ADVERT_NAME='"Ikoka Stick Repeater"'
   -D ADVERT_LAT=0.0
   -D ADVERT_LON=0.0
@@ -109,19 +147,161 @@ build_flags =
   -D MAX_NEIGHBOURS=8
 ;  -D MESH_PACKET_LOGGING=1
 ;  -D MESH_DEBUG=1
-build_src_filter = ${ikoka_stick_nrf.build_src_filter}
+build_src_filter = ${ikoka_stick_nrf_baseboard.build_src_filter}
   +<helpers/ui/SSD1306Display.cpp>
   +<../examples/simple_repeater/*.cpp>
 
-[env:ikoka_stick_nrf_room_server]
-extends = ikoka_stick_nrf
+[ikoka_stick_nrf_room_server]
+extends = ikoka_stick_nrf_baseboard
 build_flags =
-  ${ikoka_stick_nrf.build_flags}
+  ${ikoka_stick_nrf_baseboard.build_flags}
   -D ADVERT_NAME='"Ikoka Stick Room"'
   -D ADVERT_LAT=0.0
   -D ADVERT_LON=0.0
   -D ADMIN_PASSWORD='"password"'
 ;  -D MESH_PACKET_LOGGING=1
 ;  -D MESH_DEBUG=1
-build_src_filter = ${ikoka_stick_nrf.build_src_filter}
+build_src_filter = ${ikoka_stick_nrf_baseboard.build_src_filter}
   +<../examples/simple_room_server/*.cpp>
+
+;;; hardware + firmware variants
+
+;;;    22dBm EBYTE E22-900M22 variants
+
+[env:ikoka_stick_nrf_22dbm_companion_radio_usb]
+extends =
+   ikoka_stick_nrf_e22_22dbm
+   ikoka_stick_nrf_companion_radio_usb
+build_flags =
+   ${ikoka_stick_nrf_companion_radio_usb.build_flags}
+   ${ikoka_stick_nrf_e22_22dbm.build_flags}
+build_src_filter =
+   ${ikoka_stick_nrf_companion_radio_usb.build_src_filter}
+   ${ikoka_stick_nrf_e22_22dbm.build_src_filter}
+
+[env:ikoka_stick_nrf_22dbm_companion_radio_ble]
+extends =
+   ikoka_stick_nrf_e22_22dbm
+   ikoka_stick_nrf_companion_radio_ble
+build_flags =
+   ${ikoka_stick_nrf_companion_radio_ble.build_flags}
+   ${ikoka_stick_nrf_e22_22dbm.build_flags}
+build_src_filter =
+   ${ikoka_stick_nrf_companion_radio_ble.build_src_filter}
+   ${ikoka_stick_nrf_e22_22dbm.build_src_filter}
+
+[env:ikoka_stick_nrf_22dbm_repeater]
+extends =
+   ikoka_stick_nrf_e22_22dbm
+   ikoka_stick_nrf_repeater
+build_flags =
+   ${ikoka_stick_nrf_repeater.build_flags}
+   ${ikoka_stick_nrf_e22_22dbm.build_flags}
+build_src_filter =
+   ${ikoka_stick_nrf_repeater.build_src_filter}
+   ${ikoka_stick_nrf_e22_22dbm.build_src_filter}
+
+[env:ikoka_stick_nrf_22dbm_room_server]
+extends =
+   ikoka_stick_nrf_e22_22dbm
+   ikoka_stick_nrf_room_server
+build_flags =
+   ${ikoka_stick_nrf_room_server.build_flags}
+   ${ikoka_stick_nrf_e22_22dbm.build_flags}
+build_src_filter =
+   ${ikoka_stick_nrf_room_server.build_src_filter}
+   ${ikoka_stick_nrf_e22_22dbm.build_src_filter}
+
+
+;;;    30dBm EBYTE E22-900M30 variants
+
+[env:ikoka_stick_nrf_30dbm_companion_radio_usb]
+extends =
+   ikoka_stick_nrf_e22_30dbm
+   ikoka_stick_nrf_companion_radio_usb
+build_flags =
+   ${ikoka_stick_nrf_companion_radio_usb.build_flags}
+   ${ikoka_stick_nrf_e22_30dbm.build_flags}
+build_src_filter =
+   ${ikoka_stick_nrf_companion_radio_usb.build_src_filter}
+   ${ikoka_stick_nrf_e22_30dbm.build_src_filter}
+
+[env:ikoka_stick_nrf_30dbm_companion_radio_ble]
+extends =
+   ikoka_stick_nrf_e22_30dbm
+   ikoka_stick_nrf_companion_radio_ble
+build_flags =
+   ${ikoka_stick_nrf_companion_radio_ble.build_flags}
+   ${ikoka_stick_nrf_e22_30dbm.build_flags}
+build_src_filter =
+   ${ikoka_stick_nrf_companion_radio_ble.build_src_filter}
+   ${ikoka_stick_nrf_e22_30dbm.build_src_filter}
+
+[env:ikoka_stick_nrf_30dbm_repeater]
+extends =
+   ikoka_stick_nrf_e22_30dbm
+   ikoka_stick_nrf_repeater
+build_flags =
+   ${ikoka_stick_nrf_repeater.build_flags}
+   ${ikoka_stick_nrf_e22_30dbm.build_flags}
+build_src_filter =
+   ${ikoka_stick_nrf_repeater.build_src_filter}
+   ${ikoka_stick_nrf_e22_30dbm.build_src_filter}
+
+[env:ikoka_stick_nrf_30dbm_room_server]
+extends =
+   ikoka_stick_nrf_e22_30dbm
+   ikoka_stick_nrf_room_server
+build_flags =
+   ${ikoka_stick_nrf_room_server.build_flags}
+   ${ikoka_stick_nrf_e22_30dbm.build_flags}
+build_src_filter =
+   ${ikoka_stick_nrf_room_server.build_src_filter}
+   ${ikoka_stick_nrf_e22_30dbm.build_src_filter}
+
+
+;;;    33dBm EBYTE E22-900M33 variants
+
+[env:ikoka_stick_nrf_33dbm_companion_radio_usb]
+extends =
+   ikoka_stick_nrf_e22_33dbm
+   ikoka_stick_nrf_companion_radio_usb
+build_flags =
+   ${ikoka_stick_nrf_companion_radio_usb.build_flags}
+   ${ikoka_stick_nrf_e22_33dbm.build_flags}
+build_src_filter =
+   ${ikoka_stick_nrf_companion_radio_usb.build_src_filter}
+   ${ikoka_stick_nrf_e22_33dbm.build_src_filter}
+
+[env:ikoka_stick_nrf_33dbm_companion_radio_ble]
+extends =
+   ikoka_stick_nrf_e22_33dbm
+   ikoka_stick_nrf_companion_radio_ble
+build_flags =
+   ${ikoka_stick_nrf_companion_radio_ble.build_flags}
+   ${ikoka_stick_nrf_e22_33dbm.build_flags}
+build_src_filter =
+   ${ikoka_stick_nrf_companion_radio_ble.build_src_filter}
+   ${ikoka_stick_nrf_e22_33dbm.build_src_filter}
+
+[env:ikoka_stick_nrf_33dbm_repeater]
+extends =
+   ikoka_stick_nrf_e22_33dbm
+   ikoka_stick_nrf_repeater
+build_flags =
+   ${ikoka_stick_nrf_repeater.build_flags}
+   ${ikoka_stick_nrf_e22_33dbm.build_flags}
+build_src_filter =
+   ${ikoka_stick_nrf_repeater.build_src_filter}
+   ${ikoka_stick_nrf_e22_33dbm.build_src_filter}
+
+[env:ikoka_stick_nrf_33dbm_room_server]
+extends =
+   ikoka_stick_nrf_e22_33dbm
+   ikoka_stick_nrf_room_server
+build_flags =
+   ${ikoka_stick_nrf_room_server.build_flags}
+   ${ikoka_stick_nrf_e22_33dbm.build_flags}
+build_src_filter =
+   ${ikoka_stick_nrf_room_server.build_src_filter}
+   ${ikoka_stick_nrf_e22_33dbm.build_src_filter}

variants/lilygo_t3s3/platformio.ini

@@ -56,7 +56,7 @@ lib_deps =
 extends = LilyGo_T3S3_sx1262
 build_flags =
   ${LilyGo_T3S3_sx1262.build_flags}
-  -D MAX_CONTACTS=100
+  -D MAX_CONTACTS=300
   -D MAX_GROUP_CHANNELS=1
 ;  -D MESH_PACKET_LOGGING=1
 ;  -D MESH_DEBUG=1
@@ -91,7 +91,7 @@ build_flags =
   ${LilyGo_T3S3_sx1262.build_flags}
   -I examples/companion_radio/ui-new
   -D DISPLAY_CLASS=SSD1306Display
-  -D MAX_CONTACTS=100
+  -D MAX_CONTACTS=300
   -D MAX_GROUP_CHANNELS=8
 ; NOTE: DO NOT ENABLE -->  -D MESH_PACKET_LOGGING=1
 ; NOTE: DO NOT ENABLE -->  -D MESH_DEBUG=1
@@ -110,7 +110,7 @@ build_flags =
   ${LilyGo_T3S3_sx1262.build_flags}
   -I examples/companion_radio/ui-new
   -D DISPLAY_CLASS=SSD1306Display
-  -D MAX_CONTACTS=100
+  -D MAX_CONTACTS=300
   -D MAX_GROUP_CHANNELS=8
   -D BLE_PIN_CODE=123456
   -D BLE_DEBUG_LOGGING=1

variants/lilygo_t3s3_sx1276/platformio.ini

@@ -54,7 +54,7 @@ lib_deps =
 extends = LilyGo_T3S3_sx1276
 build_flags =
   ${LilyGo_T3S3_sx1276.build_flags}
-  -D MAX_CONTACTS=100
+  -D MAX_CONTACTS=300
   -D MAX_GROUP_CHANNELS=1
 ;  -D MESH_PACKET_LOGGING=1
 ;  -D MESH_DEBUG=1
@@ -90,7 +90,7 @@ build_flags =
   ${LilyGo_T3S3_sx1276.build_flags}
   -I examples/companion_radio/ui-new
   -D DISPLAY_CLASS=SSD1306Display
-  -D MAX_CONTACTS=100
+  -D MAX_CONTACTS=300
   -D MAX_GROUP_CHANNELS=8
   -D MESH_PACKET_LOGGING=1
   -D MESH_DEBUG=1
@@ -109,7 +109,7 @@ build_flags =
   ${LilyGo_T3S3_sx1276.build_flags}
   -I examples/companion_radio/ui-new
   -D DISPLAY_CLASS=SSD1306Display
-  -D MAX_CONTACTS=100
+  -D MAX_CONTACTS=300
   -D MAX_GROUP_CHANNELS=8
   -D BLE_PIN_CODE=123456
   -D BLE_DEBUG_LOGGING=1

variants/lilygo_tbeam_SX1262/platformio.ini

@@ -24,7 +24,7 @@ build_src_filter = ${esp32_base.build_src_filter}
   +<../variants/lilygo_tbeam_SX1262>
   +<helpers/ui/SSD1306Display.cpp>
   +<helpers/esp32/TBeamBoard.cpp>
-  +<helpers/sensors> 
+  +<helpers/sensors>
 board_build.partitions = min_spiffs.csv ; get around 4mb flash limit
 lib_deps =
   ${esp32_base.lib_deps}
@@ -38,7 +38,7 @@ board_build.upload.maximum_ram_size=2000000
 build_flags =
   ${LilyGo_TBeam_SX1262.build_flags}
   -I examples/companion_radio/ui-new
-  -D MAX_CONTACTS=100
+  -D MAX_CONTACTS=160
   -D MAX_GROUP_CHANNELS=8
   -D BLE_PIN_CODE=123456
   -D OFFLINE_QUEUE_SIZE=256

variants/lilygo_tbeam_SX1276/platformio.ini

@@ -22,7 +22,7 @@ build_src_filter = ${esp32_base.build_src_filter}
   +<../variants/lilygo_tbeam_SX1276>
   +<helpers/ui/SSD1306Display.cpp>
   +<helpers/esp32/TBeamBoard.cpp>
-  +<helpers/sensors> 
+  +<helpers/sensors>
 board_build.partitions = min_spiffs.csv ; get around 4mb flash limit
 lib_deps =
   ${esp32_base.lib_deps}
@@ -37,7 +37,7 @@ board_build.upload.maximum_ram_size=2000000
 build_flags =
   ${LilyGo_TBeam_SX1276.build_flags}
   -I examples/companion_radio/ui-new
-  -D MAX_CONTACTS=100
+  -D MAX_CONTACTS=160
   -D MAX_GROUP_CHANNELS=8
   -D BLE_PIN_CODE=123456
 ;  -D BLE_DEBUG_LOGGING=1

variants/lilygo_tbeam_supreme_SX1262/platformio.ini

@@ -25,7 +25,7 @@ build_src_filter = ${esp32_base.build_src_filter}
   +<../variants/lilygo_tbeam_supreme_SX1262>
   +<helpers/ui/SH1106Display.cpp>
   +<helpers/esp32/TBeamBoard.cpp>
-  +<helpers/sensors> 
+  +<helpers/sensors>
 board_build.partitions = min_spiffs.csv ; get around 4mb flash limit
 lib_deps =
   ${esp32_base.lib_deps}
@@ -74,7 +74,7 @@ extends = T_Beam_S3_Supreme_SX1262
 build_flags =
   ${T_Beam_S3_Supreme_SX1262.build_flags}
   -I examples/companion_radio/ui-new
-  -D MAX_CONTACTS=100
+  -D MAX_CONTACTS=300
   -D MAX_GROUP_CHANNELS=8
   -D BLE_PIN_CODE=123456
   -D OFFLINE_QUEUE_SIZE=256

variants/lilygo_tlora_c6/platformio.ini

@@ -67,7 +67,7 @@ lib_deps =
 [env:LilyGo_Tlora_C6_companion_radio_ble]
 extends = tlora_c6
 build_flags = ${tlora_c6.build_flags}
-  -D MAX_CONTACTS=100
+  -D MAX_CONTACTS=300
   -D MAX_GROUP_CHANNELS=8
   -D BLE_PIN_CODE=123456
   -D BLE_DEBUG_LOGGING=1

variants/lilygo_tlora_v2_1/platformio.ini

@@ -90,7 +90,7 @@ lib_deps =
 extends = LilyGo_TLora_V2_1_1_6
 build_flags =
   ${LilyGo_TLora_V2_1_1_6.build_flags}
-  -D MAX_CONTACTS=100
+  -D MAX_CONTACTS=160
   -D MAX_GROUP_CHANNELS=8
 ;  -D MESH_PACKET_LOGGING=1
 ;  -D MESH_DEBUG=1
@@ -106,7 +106,7 @@ extends = LilyGo_TLora_V2_1_1_6
 build_flags =
   ${LilyGo_TLora_V2_1_1_6.build_flags}
   -I examples/companion_radio/ui-new
-  -D MAX_CONTACTS=100
+  -D MAX_CONTACTS=160
   -D MAX_GROUP_CHANNELS=8
 ; NOTE: DO NOT ENABLE -->  -D MESH_PACKET_LOGGING=1
 ; NOTE: DO NOT ENABLE -->  -D MESH_DEBUG=1
@@ -124,7 +124,7 @@ extends = LilyGo_TLora_V2_1_1_6
 build_flags =
   ${LilyGo_TLora_V2_1_1_6.build_flags}
   -I examples/companion_radio/ui-new
-  -D MAX_CONTACTS=100
+  -D MAX_CONTACTS=160
   -D MAX_GROUP_CHANNELS=8
   -D BLE_PIN_CODE=123456
   -D OFFLINE_QUEUE_SIZE=256
@@ -158,3 +158,23 @@ build_flags =
 lib_deps =
   ${LilyGo_TLora_V2_1_1_6.lib_deps}
   ${esp32_ota.lib_deps}
+
+[env:LilyGo_TLora_V2_1_1_6_companion_radio_wifi]
+extends = LilyGo_TLora_V2_1_1_6
+build_flags =
+  ${LilyGo_TLora_V2_1_1_6.build_flags}
+  -I examples/companion_radio/ui-new
+  -D MAX_CONTACTS=160
+  -D MAX_GROUP_CHANNELS=8
+  -D WIFI_SSID='"ssid"'
+  -D WIFI_PWD='"password"'
+  -D WIFI_DEBUG_LOGGING=1
+build_src_filter = ${LilyGo_TLora_V2_1_1_6.build_src_filter}
+  +<helpers/esp32/*.cpp>
+  +<helpers/ui/SSD1306Display.cpp>
+  +<helpers/ui/MomentaryButton.cpp>
+  +<../examples/companion_radio/*.cpp>
+  +<../examples/companion_radio/ui-new/*.cpp>
+lib_deps =
+  ${LilyGo_TLora_V2_1_1_6.lib_deps}
+  densaugeo/base64 @ ~1.4.0

variants/meshadventurer/platformio.ini

@@ -80,8 +80,11 @@ extends = Meshadventurer
 build_src_filter = ${Meshadventurer.build_src_filter}
   +<../examples/companion_radio/*.cpp>
   +<helpers/ui/SSD1306Display.cpp>
+  +<../examples/companion_radio/*.cpp>
+  +<../examples/companion_radio/ui-new/*.cpp>
 build_flags =
   ${Meshadventurer.build_flags}
+  -I examples/companion_radio/ui-new
   -D RADIO_CLASS=CustomSX1262
   -D WRAPPER_CLASS=CustomSX1262Wrapper
   -D LORA_TX_POWER=22
@@ -99,8 +102,11 @@ build_src_filter = ${Meshadventurer.build_src_filter}
   +<../examples/companion_radio/*.cpp>
   +<helpers/esp32/*.cpp>
   +<helpers/ui/SSD1306Display.cpp>
+  +<../examples/companion_radio/*.cpp>
+  +<../examples/companion_radio/ui-new/*.cpp>
 build_flags =
   ${Meshadventurer.build_flags}
+  -I examples/companion_radio/ui-new
   -D RADIO_CLASS=CustomSX1262
   -D WRAPPER_CLASS=CustomSX1262Wrapper
   -D LORA_TX_POWER=22
@@ -159,8 +165,11 @@ extends = Meshadventurer
 build_src_filter = ${Meshadventurer.build_src_filter}
   +<../examples/companion_radio/*.cpp>
   +<helpers/ui/SSD1306Display.cpp>
+  +<../examples/companion_radio/*.cpp>
+  +<../examples/companion_radio/ui-new/*.cpp>
 build_flags =
   ${Meshadventurer.build_flags}
+  -I examples/companion_radio/ui-new
   -D RADIO_CLASS=CustomSX1268
   -D WRAPPER_CLASS=CustomSX1268Wrapper
   -D LORA_TX_POWER=22
@@ -178,8 +187,11 @@ build_src_filter = ${Meshadventurer.build_src_filter}
   +<../examples/companion_radio/*.cpp>
   +<helpers/esp32/*.cpp>
   +<helpers/ui/SSD1306Display.cpp>
+  +<../examples/companion_radio/*.cpp>
+  +<../examples/companion_radio/ui-new/*.cpp>
 build_flags =
   ${Meshadventurer.build_flags}
+  -I examples/companion_radio/ui-new
   -D RADIO_CLASS=CustomSX1268
   -D WRAPPER_CLASS=CustomSX1268Wrapper
   -D LORA_TX_POWER=22

variants/meshadventurer/target.cpp

@@ -18,10 +18,6 @@ MASensorManager sensors = MASensorManager(nmea);
   DISPLAY_CLASS display;
 #endif
 
-#ifndef LORA_CR
-  #define LORA_CR      5
-#endif
-
 bool radio_init() {
   fallback_clock.begin();
   rtc_clock.begin(Wire);

variants/nano_g2_ultra/nano-g2.h

@@ -1,39 +1,40 @@
 #pragma once
 
-#include <MeshCore.h>
+#include "variant.h"
+
 #include <Arduino.h>
+#include <MeshCore.h>
 
 // LoRa radio module pins
-#define P_LORA_DIO_1 (32 + 10)
-#define P_LORA_NSS (32 + 13)
-#define P_LORA_RESET (32 + 15)
-#define P_LORA_BUSY (32 + 11)
-#define P_LORA_SCLK (0 + 12)
-#define P_LORA_MISO (32 + 9)
-#define P_LORA_MOSI (0 + 11)
+#define P_LORA_DIO_1             (32 + 10)
+#define P_LORA_NSS               (32 + 13)
+#define P_LORA_RESET             (32 + 15)
+#define P_LORA_BUSY              (32 + 11)
+#define P_LORA_SCLK              (0 + 12)
+#define P_LORA_MISO              (32 + 9)
+#define P_LORA_MOSI              (0 + 11)
 
 #define SX126X_DIO2_AS_RF_SWITCH true
 #define SX126X_DIO3_TCXO_VOLTAGE 1.8
-#define SX126X_POWER_EN 37
+#define SX126X_POWER_EN          37
 
 // buttons
-#define PIN_BUTTON1 (32 + 6)
-#define BUTTON_PIN PIN_BUTTON1
-#define PIN_USER_BTN BUTTON_PIN
+#define PIN_BUTTON1              (32 + 6)
+#define BUTTON_PIN               PIN_BUTTON1
+#define PIN_USER_BTN             BUTTON_PIN
 
 // GPS
-#define GPS_EN PIN_GPS_STANDBY
+#define GPS_EN                   PIN_GPS_STANDBY
 // built-ins
-#define VBAT_MV_PER_LSB (0.73242188F) // 3.0V ADC range and 12-bit ADC resolution = 3000mV/4096
+#define VBAT_MV_PER_LSB          (0.73242188F) // 3.0V ADC range and 12-bit ADC resolution = 3000mV/4096
 
-#define VBAT_DIVIDER (0.5F)      // 150K + 150K voltage divider on VBAT, actually 100K + 100K
-#define VBAT_DIVIDER_COMP (2.0F) // Compensation factor for the VBAT divider
+#define VBAT_DIVIDER             (0.5F) // 150K + 150K voltage divider on VBAT, actually 100K + 100K
+#define VBAT_DIVIDER_COMP        (2.0F) // Compensation factor for the VBAT divider
 
-#define PIN_VBAT_READ (0 + 2)
-#define REAL_VBAT_MV_PER_LSB (VBAT_DIVIDER_COMP * VBAT_MV_PER_LSB)
+#define PIN_VBAT_READ            (0 + 2)
+#define REAL_VBAT_MV_PER_LSB     (VBAT_DIVIDER_COMP * VBAT_MV_PER_LSB)
 
-class NanoG2Ultra : public mesh::MainBoard
-{
+class NanoG2Ultra : public mesh::MainBoard {
 protected:
   uint8_t startup_reason;
 
@@ -42,18 +43,21 @@ public:
   uint16_t getBattMilliVolts() override;
   bool startOTAUpdate(const char *id, char reply[]) override;
 
-  uint8_t getStartupReason() const override
-  {
-    return startup_reason;
-  }
+  uint8_t getStartupReason() const override { return startup_reason; }
 
-  const char *getManufacturerName() const override
-  {
-    return "Nano G2 Ultra";
-  }
+  const char *getManufacturerName() const override { return "Nano G2 Ultra"; }
 
-  void reboot() override
-  {
-    NVIC_SystemReset();
+  void reboot() override { NVIC_SystemReset(); }
+
+  void powerOff() override {
+    // put GPS chip to sleep
+    digitalWrite(PIN_GPS_STANDBY, LOW);
+// unset buzzer to prevent notification circuit activating on hibernate
+#undef PIN_BUZZER
+
+    nrf_gpio_cfg_sense_input(digitalPinToInterrupt(PIN_USER_BTN), NRF_GPIO_PIN_NOPULL,
+                             NRF_GPIO_PIN_SENSE_LOW);
+
+    sd_power_system_off();
   }
 };

variants/rak4631/target.cpp

@@ -10,7 +10,11 @@ RAK4631Board board;
 
 #ifdef DISPLAY_CLASS
   DISPLAY_CLASS display;
-  MomentaryButton user_btn(PIN_USER_BTN, 1000, true);
+  MomentaryButton user_btn(PIN_USER_BTN, 1000, true, true);
+
+  #if defined(PIN_USER_BTN_ANA)
+  MomentaryButton analog_btn(PIN_USER_BTN_ANA, 1000, 20);
+  #endif
 #endif
 
 RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, SPI);

variants/rak4631/target.h

@@ -13,6 +13,9 @@
   extern DISPLAY_CLASS display;
   #include <helpers/ui/MomentaryButton.h>
   extern MomentaryButton user_btn;
+  #if defined(PIN_USER_BTN_ANA)
+  extern MomentaryButton analog_btn;
+  #endif
 #endif
 
 extern RAK4631Board board;

variants/station_g2/platformio.ini

@@ -45,6 +45,25 @@ lib_deps =
   ${Station_G2.lib_deps}
   ${esp32_ota.lib_deps}
 
+[env:Station_G2_logging_repeater]
+extends = Station_G2
+build_flags =
+  ${Station_G2.build_flags}
+  -D ADVERT_NAME='"Station G2 Logging Repeater"'
+  -D ADVERT_LAT=0.0
+  -D ADVERT_LON=0.0
+  -D ADMIN_PASSWORD='"password"'
+  -D MAX_NEIGHBOURS=8
+  -D MESH_PACKET_LOGGING=1
+  -D SX126X_RX_BOOSTED_GAIN=1
+;  https://wiki.uniteng.com/en/meshtastic/station-g2#impact-of-lora-node-dense-areashigh-noise-environments-on-rf-performance
+;  -D MESH_DEBUG=1
+build_src_filter = ${Station_G2.build_src_filter}
+  +<../examples/simple_repeater>
+lib_deps =
+  ${Station_G2.lib_deps}
+  ${esp32_ota.lib_deps}
+
 [env:Station_G2_room_server]
 extends = Station_G2
 build_src_filter = ${Station_G2.build_src_filter}
@@ -68,7 +87,7 @@ build_flags =
   ${Station_G2.build_flags}
   -I examples/companion_radio/ui-new
   -D DISPLAY_CLASS=SH1106Display
-  -D MAX_CONTACTS=100
+  -D MAX_CONTACTS=300
   -D MAX_GROUP_CHANNELS=8
 ; NOTE: DO NOT ENABLE -->  -D MESH_PACKET_LOGGING=1
 ; NOTE: DO NOT ENABLE -->  -D MESH_DEBUG=1
@@ -86,7 +105,7 @@ build_flags =
   ${Station_G2.build_flags}
   -I examples/companion_radio/ui-new
   -D DISPLAY_CLASS=SH1106Display
-  -D MAX_CONTACTS=100
+  -D MAX_CONTACTS=300
   -D MAX_GROUP_CHANNELS=8
   -D BLE_PIN_CODE=123456
   -D BLE_DEBUG_LOGGING=1

variants/t1000-e/platformio.ini

@@ -34,6 +34,65 @@ build_src_filter = ${nrf52840_t1000e.build_src_filter}
 debug_tool = jlink
 upload_protocol = nrfutil
 
+[env:t1000e_repeater]
+extends = t1000-e
+build_flags = ${t1000-e.build_flags}
+  -I examples/companion_radio/ui-orig
+  -D ADVERT_NAME='"t1000-e Repeater"'
+  -D ADVERT_LAT=0.0
+  -D ADVERT_LON=0.0
+  -D ADMIN_PASSWORD='"password"'
+  -D MAX_NEIGHBOURS=8
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+  -D RX_BOOSTED_GAIN=true
+  -D RF_SWITCH_TABLE
+build_src_filter = ${t1000-e.build_src_filter}
+  +<../examples/simple_repeater>
+lib_deps = ${t1000-e.lib_deps}
+  stevemarple/MicroNMEA @ ^2.0.6
+
+[env:t1000e_room_server]
+extends = t1000-e
+build_flags = ${t1000-e.build_flags}
+  -I examples/companion_radio/ui-orig
+  -D ADVERT_NAME='"t1000-e Room"'
+  -D ADVERT_LAT=0.0
+  -D ADVERT_LON=0.0
+  -D ADMIN_PASSWORD='"password"'
+  -D ROOM_PASSWORD='"hello"'
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+  -D RX_BOOSTED_GAIN=true
+  -D RF_SWITCH_TABLE
+build_src_filter = ${t1000-e.build_src_filter}
+  +<../examples/simple_room_server>
+lib_deps = ${t1000-e.lib_deps}
+  stevemarple/MicroNMEA @ ^2.0.6
+
+[env:t1000e_companion_radio_usb]
+extends = t1000-e
+build_flags = ${t1000-e.build_flags}
+  -I examples/companion_radio/ui-orig
+  -D MAX_CONTACTS=100
+  -D MAX_GROUP_CHANNELS=8
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+  -D OFFLINE_QUEUE_SIZE=256
+  -D RX_BOOSTED_GAIN=true
+  -D RF_SWITCH_TABLE
+  -D DISPLAY_CLASS=NullDisplayDriver
+  -D PIN_BUZZER=25
+  -D PIN_BUZZER_EN=37      ; P1/5 - required for T1000-E
+build_src_filter = ${t1000-e.build_src_filter}
+  +<helpers/ui/buzzer.cpp>
+  +<../examples/companion_radio/*.cpp>
+  +<../examples/companion_radio/ui-orig/*.cpp>
+lib_deps = ${t1000-e.lib_deps}
+  densaugeo/base64 @ ~1.4.0
+  stevemarple/MicroNMEA @ ^2.0.6
+  end2endzone/NonBlockingRTTTL@^1.3.0
+
 [env:t1000e_companion_radio_ble]
 extends = t1000-e
 build_flags = ${t1000-e.build_flags}
@@ -58,4 +117,4 @@ build_src_filter = ${t1000-e.build_src_filter}
 lib_deps = ${t1000-e.lib_deps}
   densaugeo/base64 @ ~1.4.0
   stevemarple/MicroNMEA @ ^2.0.6
-  end2endzone/NonBlockingRTTTL@^1.3.0
+  end2endzone/NonBlockingRTTTL@^1.3.0

variants/thinknode_m1/platformio.ini

@@ -77,6 +77,7 @@ build_flags =
   -D DISPLAY_CLASS=GxEPDDisplay
   -D OFFLINE_QUEUE_SIZE=256
   -D PIN_BUZZER=6
+  -D AUTO_SHUTDOWN_MILLIVOLTS=3300
 ;  -D MESH_PACKET_LOGGING=1
 ;  -D MESH_DEBUG=1
 build_src_filter = ${ThinkNode_M1.build_src_filter}

variants/xiao_c3/platformio.ini

@@ -19,28 +19,6 @@ build_flags =
 build_src_filter = ${esp32_base.build_src_filter}
   +<../variants/xiao_c3>
 
-[Xiao_esp32_C3_custom]
-extends = esp32_base
-board = seeed_xiao_esp32c3
-build_flags =
-  ${esp32_base.build_flags}
-  -I variants/xiao_c3
-  -D ESP32_CPU_FREQ=80
-  -D LORA_TX_BOOST_PIN=D3
-  -D P_LORA_TX_LED=D5
-  -D PIN_VBAT_READ=D0
-  -D P_LORA_DIO_1=D2
-  -D P_LORA_NSS=D4
-  -D P_LORA_RESET=RADIOLIB_NC
-  -D P_LORA_BUSY=D1
-  -D PIN_BOARD_SDA=D6
-  -D PIN_BOARD_SCL=D7
-  -D SX126X_DIO2_AS_RF_SWITCH=true
-  -D SX126X_DIO3_TCXO_VOLTAGE=1.8
-  -D SX126X_CURRENT_LIMIT=140
-build_src_filter = ${esp32_base.build_src_filter}
-  +<../variants/xiao_c3>
-
 [env:Xiao_C3_Repeater_sx1262]
 extends = Xiao_esp32_C3
 build_src_filter = ${Xiao_esp32_C3.build_src_filter}
@@ -74,7 +52,7 @@ build_flags =
   -D WRAPPER_CLASS=CustomSX1262Wrapper
   -D SX126X_RX_BOOSTED_GAIN=1
   -D LORA_TX_POWER=22
-  -D MAX_CONTACTS=100
+  -D MAX_CONTACTS=300
   -D MAX_GROUP_CHANNELS=8
   -D BLE_PIN_CODE=123456
   -D OFFLINE_QUEUE_SIZE=256
@@ -97,7 +75,7 @@ build_flags =
   -D WRAPPER_CLASS=CustomSX1262Wrapper
   -D SX126X_RX_BOOSTED_GAIN=1
   -D LORA_TX_POWER=22
-  -D MAX_CONTACTS=100
+  -D MAX_CONTACTS=300
   -D MAX_GROUP_CHANNELS=8
   -D OFFLINE_QUEUE_SIZE=256
   ; -D BLE_DEBUG_LOGGING=1
@@ -107,46 +85,3 @@ lib_deps =
   ${Xiao_esp32_C3.lib_deps}
   ${esp32_ota.lib_deps}
   densaugeo/base64 @ ~1.4.0
-
-[env:Xiao_C3_Repeater_sx1262_custom]
-extends = Xiao_esp32_C3_custom
-build_src_filter = ${Xiao_esp32_C3_custom.build_src_filter}
-  +<../examples/simple_repeater/main.cpp>
-build_flags =
-  ${Xiao_esp32_C3_custom.build_flags}
-  -D RADIO_CLASS=CustomSX1262
-  -D WRAPPER_CLASS=CustomSX1262Wrapper
-  -D SX126X_RX_BOOSTED_GAIN=1
-  -D LORA_TX_POWER=22
-  -D ADVERT_NAME='"Xiao Repeater"'
-  -D ADVERT_LAT=0.0
-  -D ADVERT_LON=0.0
-  -D ADMIN_PASSWORD='"password"'
-  -D MAX_NEIGHBOURS=8
-;  -D MESH_PACKET_LOGGING=1
-;  -D MESH_DEBUG=1
-lib_deps =
-  ${Xiao_esp32_C3_custom.lib_deps}
-  ${esp32_ota.lib_deps}
-  bakercp/CRC32 @ ^2.0.0
-
-[env:Xiao_C3_Repeater_sx1268_custom]
-extends = Xiao_esp32_C3_custom
-build_src_filter = ${Xiao_esp32_C3_custom.build_src_filter}
-  +<../examples/simple_repeater/main.cpp>
-build_flags =
-  ${Xiao_esp32_C3_custom.build_flags}
-  -D RADIO_CLASS=CustomSX1268
-  -D WRAPPER_CLASS=CustomSX1268Wrapper
-  -D LORA_TX_POWER=22
-  -D ADVERT_NAME='"Xiao Repeater"'
-  -D ADVERT_LAT=0.0
-  -D ADVERT_LON=0.0
-  -D ADMIN_PASSWORD='"password"'
-  -D MAX_NEIGHBOURS=8
- ; -D MESH_PACKET_LOGGING=1
- ; -D MESH_DEBUG=1
-lib_deps =
-  ${Xiao_esp32_C3_custom.lib_deps}
-  ${esp32_ota.lib_deps}
-  bakercp/CRC32 @ ^2.0.0

variants/xiao_c6/platformio.ini

@@ -50,7 +50,7 @@ lib_deps =
 [env:Xiao_C6_companion_radio_ble]
 extends = Xiao_C6
 build_flags = ${Xiao_C6.build_flags}
-  -D MAX_CONTACTS=100
+  -D MAX_CONTACTS=300
   -D MAX_GROUP_CHANNELS=8
   -D BLE_PIN_CODE=123456
   -D BLE_DEBUG_LOGGING=1
@@ -107,7 +107,7 @@ lib_deps =
 [env:Meshimi_companion_radio_ble]
 extends = Meshimi
 build_flags = ${Meshimi.build_flags}
-  -D MAX_CONTACTS=100
+  -D MAX_CONTACTS=300
   -D MAX_GROUP_CHANNELS=8
   -D BLE_PIN_CODE=123456
   -D BLE_DEBUG_LOGGING=1
@@ -121,3 +121,65 @@ build_src_filter = ${Meshimi.build_src_filter}
 lib_deps =
   ${Meshimi.lib_deps}
   densaugeo/base64 @ ~1.4.0
+
+; WHY2025 badge variant
+; requires soldering 2 pins between the esp32-C6 and the lora chip as shown here: https://wiki.why2025.org/Project:Meshtastic_on_the_WHY2025_badge
+; also requires wiping the esp32-P4
+[WHY2025_badge]
+extends = Xiao_C6
+board_build.partitions = default_8MB.csv
+board_upload.flash_size = 8MB
+board_upload.maximum_size = 8388608
+build_flags =
+  ${Xiao_C6.build_flags}
+  -D P_LORA_SCLK=6
+  -D P_LORA_MISO=2
+  -D P_LORA_MOSI=7
+  -D P_LORA_NSS=4
+  -D P_LORA_DIO_1=5
+  -D P_LORA_BUSY=11
+  -D P_LORA_RESET=1
+  -D SX126X_TXEN=3
+  -UPIN_BOARD_SDA
+  -UPIN_BOARD_SCL
+  -UP_LORA_TX_LED
+  -USX126X_RXEN
+  -USX126X_DIO2_AS_RF_SWITCH
+  -USX126X_DIO3_TCXO_VOLTAGE
+
+[env:WHY2025_badge_Repeater]
+extends = WHY2025_badge
+build_src_filter = ${WHY2025_badge.build_src_filter}
+  +<../examples/simple_repeater/main.cpp>
+build_flags =
+  ${WHY2025_badge.build_flags}
+  -D ADVERT_NAME='"WHY2025 Badge Repeater"'
+  -D ADVERT_LAT=0.0
+  -D ADVERT_LON=0.0
+  -D ADMIN_PASSWORD='"password"'
+  -D MAX_NEIGHBOURS=8
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+lib_deps =
+  ${WHY2025_badge.lib_deps}
+;  ${esp32_ota.lib_deps}
+
+[env:WHY2025_badge_companion_radio_ble]
+extends = WHY2025_badge
+build_flags = ${WHY2025_badge.build_flags}
+  -D MAX_CONTACTS=300
+  -D MAX_GROUP_CHANNELS=8
+  -D BLE_PIN_CODE=123456
+  -D BLE_DEBUG_LOGGING=1
+  -D OFFLINE_QUEUE_SIZE=256
+  -D ENABLE_PRIVATE_KEY_IMPORT=1
+  -D ENABLE_PRIVATE_KEY_EXPORT=1
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+build_src_filter = ${WHY2025_badge.build_src_filter}
+  +<helpers/esp32/*.cpp>
+  -<helpers/esp32/ESPNOWRadio.cpp>
+  +<../examples/companion_radio/*.cpp>
+lib_deps =
+  ${WHY2025_badge.lib_deps}
+  densaugeo/base64 @ ~1.4.0

variants/xiao_s3_wio/platformio.ini

@@ -65,7 +65,7 @@ lib_deps =
 extends = Xiao_S3_WIO
 build_flags =
   ${Xiao_S3_WIO.build_flags}
-  -D MAX_CONTACTS=100
+  -D MAX_CONTACTS=300
   -D MAX_GROUP_CHANNELS=8
 ;  -D MESH_PACKET_LOGGING=1
 ;  -D MESH_DEBUG=1
@@ -80,7 +80,7 @@ extends = Xiao_S3_WIO
 build_flags =
   ${Xiao_S3_WIO.build_flags}
   -I examples/companion_radio/ui-new
-  -D MAX_CONTACTS=100
+  -D MAX_CONTACTS=300
   -D MAX_GROUP_CHANNELS=8
   -D BLE_PIN_CODE=123456
   -D DISPLAY_CLASS=SSD1306Display
@@ -103,15 +103,21 @@ lib_deps =
 extends = Xiao_S3_WIO
 build_flags =
   ${Xiao_S3_WIO.build_flags}
-  -D MAX_CONTACTS=100
+  -I examples/companion_radio/ui-new
+  -D MAX_CONTACTS=300
   -D MAX_GROUP_CHANNELS=8
+  -D DISPLAY_CLASS=SSD1306Display
   -D SERIAL_TX=D6
   -D SERIAL_RX=D7
 ;  -D MESH_PACKET_LOGGING=1
 ;  -D MESH_DEBUG=1
 build_src_filter = ${Xiao_S3_WIO.build_src_filter}
+  +<helpers/ui/SSD1306Display.cpp>
   +<helpers/esp32/*.cpp>
+  +<helpers/ui/MomentaryButton.cpp>
   +<../examples/companion_radio/*.cpp>
+  +<../examples/companion_radio/ui-new/*.cpp>
 lib_deps =
   ${Xiao_S3_WIO.lib_deps}
   densaugeo/base64 @ ~1.4.0
+  adafruit/Adafruit SSD1306 @ ^2.5.13