Merge branch 'dev' into analog-button

examples/companion_radio/Button.cpp

@@ -50,9 +50,12 @@ void Button::update() {
             triggerEvent(SHORT_PRESS);
         } else if (_clickCount == 2) {
             triggerEvent(DOUBLE_PRESS);
-        } else if (_clickCount >= 3) {
+        } else if (_clickCount == 3) {
             triggerEvent(TRIPLE_PRESS);
+        } else if (_clickCount >= 4) {
+            triggerEvent(QUADRUPLE_PRESS);
         }
+
         _clickCount = 0;
         _state = IDLE;
     }
@@ -116,6 +119,9 @@ void Button::triggerEvent(EventType event) {
         case TRIPLE_PRESS:
             if (_onTriplePress) _onTriplePress();
             break;
+        case QUADRUPLE_PRESS:
+            if (_onQuadruplePress) _onQuadruplePress();
+            break;
         case LONG_PRESS:
             if (_onLongPress) _onLongPress();
             break;

examples/companion_radio/Button.h

@@ -16,6 +16,7 @@ public:
         SHORT_PRESS,
         DOUBLE_PRESS,
         TRIPLE_PRESS,
+        QUADRUPLE_PRESS,
         LONG_PRESS,
         ANY_PRESS
     };
@@ -32,6 +33,7 @@ public:
     void onShortPress(EventCallback callback) { _onShortPress = callback; }
     void onDoublePress(EventCallback callback) { _onDoublePress = callback; }
     void onTriplePress(EventCallback callback) { _onTriplePress = callback; }
+    void onQuadruplePress(EventCallback callback) { _onQuadruplePress = callback; }
     void onLongPress(EventCallback callback) { _onLongPress = callback; }
     void onAnyPress(EventCallback callback) { _onAnyPress = callback; }
     
@@ -68,6 +70,7 @@ private:
     EventCallback _onShortPress = nullptr;
     EventCallback _onDoublePress = nullptr;
     EventCallback _onTriplePress = nullptr;
+    EventCallback _onQuadruplePress = nullptr;
     EventCallback _onLongPress = nullptr;
     EventCallback _onAnyPress = nullptr;
     

examples/companion_radio/UITask.cpp

@@ -34,8 +34,9 @@ static const uint8_t meshcore_logo [] PROGMEM = {
     0xe3, 0xe3, 0x8f, 0xff, 0x1f, 0xfc, 0x3c, 0x0e, 0x1f, 0xf8, 0xff, 0xf8, 0x70, 0x3c, 0x7f, 0xf8, 
 };
 
-void UITask::begin(DisplayDriver* display, NodePrefs* node_prefs) {
+void UITask::begin(DisplayDriver* display, SensorManager* sensors, NodePrefs* node_prefs) {
   _display = display;
+  _sensors = sensors;
   _auto_off = millis() + AUTO_OFF_MILLIS;
   clearMsgPreview();
   _node_prefs = node_prefs;
@@ -67,6 +68,7 @@ void UITask::begin(DisplayDriver* display, NodePrefs* node_prefs) {
   _userButton->onShortPress([this]() { handleButtonShortPress(); });
   _userButton->onDoublePress([this]() { handleButtonDoublePress(); });
   _userButton->onTriplePress([this]() { handleButtonTriplePress(); });
+  _userButton->onQuadruplePress([this]() { handleButtonQuadruplePress(); });
   _userButton->onLongPress([this]() { handleButtonLongPress(); });
   _userButton->onAnyPress([this]() { handleButtonAnyPress(); });
 #endif
@@ -396,6 +398,25 @@ void UITask::handleButtonTriplePress() {
   #endif
 }
 
+void UITask::handleButtonQuadruplePress() {
+  MESH_DEBUG_PRINTLN("UITask: quad press triggered");
+  if (_sensors != NULL) {
+    // toggle GPS onn/off
+    int num = _sensors->getNumSettings();
+    for (int i = 0; i < num; i++) {
+      if (strcmp(_sensors->getSettingName(i), "gps") == 0) {
+        if (strcmp(_sensors->getSettingValue(i), "1") == 0) {
+          _sensors->setSettingValue("gps", "0");
+        } else {
+          _sensors->setSettingValue("gps", "1");
+        }
+        break;
+      }
+    }
+  }
+  _need_refresh = true;
+}
+
 void UITask::handleButtonLongPress() {
   MESH_DEBUG_PRINTLN("UITask: long press triggered");
   if (millis() - ui_started_at < 8000) {   // long press in first 8 seconds since startup -> CLI/rescue

examples/companion_radio/UITask.h

@@ -2,6 +2,7 @@
 
 #include <MeshCore.h>
 #include <helpers/ui/DisplayDriver.h>
+#include <helpers/SensorManager.h>
 #include <stddef.h>
 
 #ifdef PIN_BUZZER
@@ -24,6 +25,7 @@
 class UITask {
   DisplayDriver* _display;
   mesh::MainBoard* _board;
+  SensorManager* _sensors;
 #ifdef PIN_BUZZER
   genericBuzzer buzzer;
 #endif
@@ -56,17 +58,18 @@ class UITask {
   void handleButtonShortPress();
   void handleButtonDoublePress();
   void handleButtonTriplePress();
+  void handleButtonQuadruplePress();
   void handleButtonLongPress();
 
  
 public:
 
-  UITask(mesh::MainBoard* board) : _board(board), _display(NULL) {
+  UITask(mesh::MainBoard* board) : _board(board), _display(NULL), _sensors(NULL) {
       _next_refresh = 0;
       ui_started_at = 0;
       _connected = false;
   }
-  void begin(DisplayDriver* display, NodePrefs* node_prefs);
+  void begin(DisplayDriver* display, SensorManager* sensors, NodePrefs* node_prefs);
 
   void setHasConnection(bool connected) { _connected = connected; }
   bool hasDisplay() const { return _display != NULL; }

examples/companion_radio/main.cpp

@@ -186,7 +186,7 @@ void setup() {
   sensors.begin();
 
 #ifdef DISPLAY_CLASS
-  ui_task.begin(disp, the_mesh.getNodePrefs());  // still want to pass this in as dependency, as prefs might be moved
+  ui_task.begin(disp, &sensors, the_mesh.getNodePrefs());  // still want to pass this in as dependency, as prefs might be moved
 #endif
 }
 

src/helpers/CustomSX1262.h

@@ -30,6 +30,12 @@ class CustomSX1262 : public SX1262 {
     #endif
   #endif
       int status = begin(LORA_FREQ, LORA_BW, LORA_SF, cr, RADIOLIB_SX126X_SYNC_WORD_PRIVATE, LORA_TX_POWER, 8, tcxo);
+      // if radio init fails with -707/-706, try again with tcxo voltage set to 0.0f
+      if (status == RADIOLIB_ERR_SPI_CMD_FAILED || status == RADIOLIB_ERR_SPI_CMD_INVALID) {
+        #define SX126X_DIO3_TCXO_VOLTAGE (0.0f);
+        tcxo = SX126X_DIO3_TCXO_VOLTAGE;
+        status = begin(LORA_FREQ, LORA_BW, LORA_SF, cr, RADIOLIB_SX126X_SYNC_WORD_PRIVATE, LORA_TX_POWER, 8, tcxo);
+      }
       if (status != RADIOLIB_ERR_NONE) {
         Serial.print("ERROR: radio init failed: ");
         Serial.println(status);

variants/promicro/target.cpp

@@ -2,9 +2,6 @@
 #include "target.h"
 #include <helpers/ArduinoHelpers.h>
 
-#if ENV_INCLUDE_GPS
-#endif
-
 PromicroBoard board;
 
 RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, SPI);
@@ -25,47 +22,10 @@ AutoDiscoverRTCClock rtc_clock(fallback_clock);
   DISPLAY_CLASS display;
 #endif
 
-#ifndef LORA_CR
-  #define LORA_CR      5
-#endif
-
 bool radio_init() {
   rtc_clock.begin(Wire);
   
-#ifdef SX126X_DIO3_TCXO_VOLTAGE
+  return radio.std_init(&SPI);
-  float tcxo = SX126X_DIO3_TCXO_VOLTAGE;
-#else
-  float tcxo = 1.6f;
-#endif
-
-  SPI.setPins(P_LORA_MISO, P_LORA_SCLK, P_LORA_MOSI);
-  SPI.begin();
-  radio.setRfSwitchPins(SX126X_RXEN, SX126X_TXEN);
-  int status = radio.begin(LORA_FREQ, LORA_BW, LORA_SF, LORA_CR, RADIOLIB_SX126X_SYNC_WORD_PRIVATE, LORA_TX_POWER, 8, tcxo);
-  if (status == RADIOLIB_ERR_SPI_CMD_FAILED || status == RADIOLIB_ERR_SPI_CMD_INVALID) {
-    #define SX126X_DIO3_TCXO_VOLTAGE (0.0f);
-    tcxo = SX126X_DIO3_TCXO_VOLTAGE;
-    status = radio.begin(LORA_FREQ, LORA_BW, LORA_SF, LORA_CR, RADIOLIB_SX126X_SYNC_WORD_PRIVATE, LORA_TX_POWER, 8, tcxo);
-  }
-  if (status != RADIOLIB_ERR_NONE) {
-    Serial.print("ERROR: radio init failed: ");
-    Serial.println(status);
-    return false;  // fail
-  }
-  
-  radio.setCRC(1);
-  
-#ifdef SX126X_CURRENT_LIMIT
-  radio.setCurrentLimit(SX126X_CURRENT_LIMIT);
-#endif
-#ifdef SX126X_DIO2_AS_RF_SWITCH
-  radio.setDio2AsRfSwitch(SX126X_DIO2_AS_RF_SWITCH);
-#endif
-#ifdef SX126X_RX_BOOSTED_GAIN
-  radio.setRxBoostedGainMode(SX126X_RX_BOOSTED_GAIN);
-#endif
-
-  return true;  // success
 }
 
 uint32_t radio_get_rng_seed() {

variants/t1000-e/target.h

@@ -3,7 +3,7 @@
 #define RADIOLIB_STATIC_ONLY 1
 #include <RadioLib.h>
 #include <helpers/RadioLibWrappers.h>
-#include <helpers/nrf52/T1000eBoard.h>
+#include "T1000eBoard.h"
 #include <helpers/CustomLR1110Wrapper.h>
 #include <helpers/ArduinoHelpers.h>
 #include <helpers/SensorManager.h>

variants/thinknode_m1/target.cpp

@@ -18,41 +18,9 @@ ThinkNodeM1SensorManager sensors = ThinkNodeM1SensorManager(nmea);
   DISPLAY_CLASS display;
 #endif
 
-#ifndef LORA_CR
-  #define LORA_CR      5
-#endif
-
 bool radio_init() {
   rtc_clock.begin(Wire);
-
+  return radio.std_init(&SPI);
-#ifdef SX126X_DIO3_TCXO_VOLTAGE
-  float tcxo = SX126X_DIO3_TCXO_VOLTAGE;
-#else
-  float tcxo = 1.6f;
-#endif
-
-  SPI.setPins(P_LORA_MISO, P_LORA_SCLK, P_LORA_MOSI);
-  SPI.begin();
-  int status = radio.begin(LORA_FREQ, LORA_BW, LORA_SF, LORA_CR, RADIOLIB_SX126X_SYNC_WORD_PRIVATE, LORA_TX_POWER, 8, tcxo);
-  if (status != RADIOLIB_ERR_NONE) {
-    Serial.print("ERROR: radio init failed: ");
-    Serial.println(status);
-    return false;  // fail
-  }
-
-  radio.setCRC(1);
-
-#ifdef SX126X_CURRENT_LIMIT
-  radio.setCurrentLimit(SX126X_CURRENT_LIMIT);
-#endif
-#ifdef SX126X_DIO2_AS_RF_SWITCH
-  radio.setDio2AsRfSwitch(SX126X_DIO2_AS_RF_SWITCH);
-#endif
-#ifdef SX126X_RX_BOOSTED_GAIN
-  radio.setRxBoostedGainMode(SX126X_RX_BOOSTED_GAIN);
-#endif
-
-  return true;  // success
 }
 
 uint32_t radio_get_rng_seed() {