Added basic support for Station G2

This commit is contained in:
Rastislav Vysoky 2025-03-07 15:34:00 +01:00
parent ae7bf7eae2
commit acac20dc89
5 changed files with 328 additions and 111 deletions

View file

@ -0,0 +1,69 @@
#pragma once
#include <Arduino.h>
// LoRa radio module pins for Station G2
#define P_LORA_DIO_1 48
#define P_LORA_NSS 11
#define P_LORA_RESET 21
#define P_LORA_BUSY 47
#define P_LORA_SCLK 12
#define P_LORA_MISO 14
#define P_LORA_MOSI 13
// built-ins
//#define PIN_LED_BUILTIN 35
//#define PIN_VEXT_EN 36
#include "ESP32Board.h"
#include <driver/rtc_io.h>
class StationG2Board : public ESP32Board {
public:
void begin() {
ESP32Board::begin();
esp_reset_reason_t reason = esp_reset_reason();
if (reason == ESP_RST_DEEPSLEEP) {
long wakeup_source = esp_sleep_get_ext1_wakeup_status();
if (wakeup_source & (1 << P_LORA_DIO_1)) { // received a LoRa packet (while in deep sleep)
startup_reason = BD_STARTUP_RX_PACKET;
}
rtc_gpio_hold_dis((gpio_num_t)P_LORA_NSS);
rtc_gpio_deinit((gpio_num_t)P_LORA_DIO_1);
}
}
void enterDeepSleep(uint32_t secs, int pin_wake_btn = -1) {
esp_sleep_pd_config(ESP_PD_DOMAIN_RTC_PERIPH, ESP_PD_OPTION_ON);
// Make sure the DIO1 and NSS GPIOs are hold on required levels during deep sleep
rtc_gpio_set_direction((gpio_num_t)P_LORA_DIO_1, RTC_GPIO_MODE_INPUT_ONLY);
rtc_gpio_pulldown_en((gpio_num_t)P_LORA_DIO_1);
rtc_gpio_hold_en((gpio_num_t)P_LORA_NSS);
if (pin_wake_btn < 0) {
esp_sleep_enable_ext1_wakeup( (1L << P_LORA_DIO_1), ESP_EXT1_WAKEUP_ANY_HIGH); // wake up on: recv LoRa packet
} else {
esp_sleep_enable_ext1_wakeup( (1L << P_LORA_DIO_1) | (1L << pin_wake_btn), ESP_EXT1_WAKEUP_ANY_HIGH); // wake up on: recv LoRa packet OR wake btn
}
if (secs > 0) {
esp_sleep_enable_timer_wakeup(secs * 1000000);
}
// Finally set ESP32 into sleep
esp_deep_sleep_start(); // CPU halts here and never returns!
}
uint16_t getBattMilliVolts() override {
return 0;
}
const char* getManufacturerName() const override {
return "Station G2";
}
};