mirror of
https://github.com/meshcore-dev/MeshCore.git
synced 2026-04-20 22:13:47 +00:00
Merge pull request #608 from Quency-D/dev-heltec_e213
Add heltec_vision_master_e213 board.
This commit is contained in:
ripplebiz
GitHub
commit
a7dcd112ac
11 changed files with 444 additions and 23 deletions
69
variants/heltec_vision_master_e213/HeltecE213Board.cpp
Normal file
69
variants/heltec_vision_master_e213/HeltecE213Board.cpp
Normal file
|
|
@ -0,0 +1,69 @@
|
|||
#include "HeltecE213Board.h"
|
||||
|
||||
void HeltecE213Board::begin() {
|
||||
ESP32Board::begin();
|
||||
|
||||
pinMode(PIN_ADC_CTRL, OUTPUT);
|
||||
digitalWrite(PIN_ADC_CTRL, LOW); // Initially inactive
|
||||
|
||||
periph_power.begin();
|
||||
|
||||
esp_reset_reason_t reason = esp_reset_reason();
|
||||
if (reason == ESP_RST_DEEPSLEEP) {
|
||||
long wakeup_source = esp_sleep_get_ext1_wakeup_status();
|
||||
if (wakeup_source & (1 << P_LORA_DIO_1)) { // received a LoRa packet (while in deep sleep)
|
||||
startup_reason = BD_STARTUP_RX_PACKET;
|
||||
}
|
||||
|
||||
rtc_gpio_hold_dis((gpio_num_t)P_LORA_NSS);
|
||||
rtc_gpio_deinit((gpio_num_t)P_LORA_DIO_1);
|
||||
}
|
||||
}
|
||||
|
||||
void HeltecE213Board::enterDeepSleep(uint32_t secs, int pin_wake_btn) {
|
||||
esp_sleep_pd_config(ESP_PD_DOMAIN_RTC_PERIPH, ESP_PD_OPTION_ON);
|
||||
|
||||
// Make sure the DIO1 and NSS GPIOs are hold on required levels during deep sleep
|
||||
rtc_gpio_set_direction((gpio_num_t)P_LORA_DIO_1, RTC_GPIO_MODE_INPUT_ONLY);
|
||||
rtc_gpio_pulldown_en((gpio_num_t)P_LORA_DIO_1);
|
||||
|
||||
rtc_gpio_hold_en((gpio_num_t)P_LORA_NSS);
|
||||
|
||||
if (pin_wake_btn < 0) {
|
||||
esp_sleep_enable_ext1_wakeup( (1L << P_LORA_DIO_1), ESP_EXT1_WAKEUP_ANY_HIGH); // wake up on: recv LoRa packet
|
||||
} else {
|
||||
esp_sleep_enable_ext1_wakeup( (1L << P_LORA_DIO_1) | (1L << pin_wake_btn), ESP_EXT1_WAKEUP_ANY_HIGH); // wake up on: recv LoRa packet OR wake btn
|
||||
}
|
||||
|
||||
if (secs > 0) {
|
||||
esp_sleep_enable_timer_wakeup(secs * 1000000);
|
||||
}
|
||||
|
||||
// Finally set ESP32 into sleep
|
||||
esp_deep_sleep_start(); // CPU halts here and never returns!
|
||||
}
|
||||
|
||||
void HeltecE213Board::powerOff() {
|
||||
// TODO: re-enable this when there is a definite wake-up source pin:
|
||||
// enterDeepSleep(0);
|
||||
}
|
||||
|
||||
uint16_t HeltecE213Board::getBattMilliVolts() {
|
||||
analogReadResolution(10);
|
||||
digitalWrite(PIN_ADC_CTRL, HIGH);
|
||||
|
||||
uint32_t raw = 0;
|
||||
for (int i = 0; i < 8; i++) {
|
||||
raw += analogRead(PIN_VBAT_READ);
|
||||
}
|
||||
raw = raw / 8;
|
||||
|
||||
digitalWrite(PIN_ADC_CTRL, LOW);
|
||||
|
||||
return (5.42 * (3.3 / 1024.0) * raw) * 1000;
|
||||
}
|
||||
|
||||
const char* HeltecE213Board::getManufacturerName() const {
|
||||
return "Heltec E213";
|
||||
}
|
||||
|
||||
30
variants/heltec_vision_master_e213/HeltecE213Board.h
Normal file
30
variants/heltec_vision_master_e213/HeltecE213Board.h
Normal file
|
|
@ -0,0 +1,30 @@
|
|||
#pragma once
|
||||
|
||||
#include <Arduino.h>
|
||||
#include <helpers/RefCountedDigitalPin.h>
|
||||
#include <helpers/ESP32Board.h>
|
||||
#include <driver/rtc_io.h>
|
||||
|
||||
// LoRa radio module pins for heltec_vision_master_e213
|
||||
#define P_LORA_DIO_1 14
|
||||
#define P_LORA_NSS 8
|
||||
#define P_LORA_RESET 12
|
||||
#define P_LORA_BUSY 13
|
||||
#define P_LORA_SCLK 9
|
||||
#define P_LORA_MISO 11
|
||||
#define P_LORA_MOSI 10
|
||||
|
||||
class HeltecE213Board : public ESP32Board {
|
||||
|
||||
public:
|
||||
RefCountedDigitalPin periph_power;
|
||||
|
||||
HeltecE213Board() : periph_power(PIN_VEXT_EN,PIN_VEXT_EN_ACTIVE) { }
|
||||
|
||||
void begin();
|
||||
void enterDeepSleep(uint32_t secs, int pin_wake_btn = -1);
|
||||
void powerOff() override;
|
||||
uint16_t getBattMilliVolts() override;
|
||||
const char* getManufacturerName() const override ;
|
||||
|
||||
};
|
||||
61
variants/heltec_vision_master_e213/pins_arduino.h
Normal file
61
variants/heltec_vision_master_e213/pins_arduino.h
Normal file
|
|
@ -0,0 +1,61 @@
|
|||
#ifndef Pins_Arduino_h
|
||||
#define Pins_Arduino_h
|
||||
|
||||
#include <stdint.h>
|
||||
|
||||
static const uint8_t LED_BUILTIN = 45; // LED is not populated on earliest board variant
|
||||
#define BUILTIN_LED LED_BUILTIN // Backward compatibility
|
||||
#define LED_BUILTIN LED_BUILTIN
|
||||
|
||||
static const uint8_t TX = 43;
|
||||
static const uint8_t RX = 44;
|
||||
|
||||
static const uint8_t SDA = 39;
|
||||
static const uint8_t SCL = 38;
|
||||
|
||||
static const uint8_t SS = 8;
|
||||
static const uint8_t MOSI = 10;
|
||||
static const uint8_t MISO = 11;
|
||||
static const uint8_t SCK = 9;
|
||||
|
||||
static const uint8_t A0 = 1;
|
||||
static const uint8_t A1 = 2;
|
||||
static const uint8_t A2 = 3;
|
||||
static const uint8_t A3 = 4;
|
||||
static const uint8_t A4 = 5;
|
||||
static const uint8_t A5 = 6;
|
||||
static const uint8_t A6 = 7;
|
||||
static const uint8_t A7 = 8;
|
||||
static const uint8_t A8 = 9;
|
||||
static const uint8_t A9 = 10;
|
||||
static const uint8_t A10 = 11;
|
||||
static const uint8_t A11 = 12;
|
||||
static const uint8_t A12 = 13;
|
||||
static const uint8_t A13 = 14;
|
||||
static const uint8_t A14 = 15;
|
||||
static const uint8_t A15 = 16;
|
||||
static const uint8_t A16 = 17;
|
||||
static const uint8_t A17 = 18;
|
||||
static const uint8_t A18 = 19;
|
||||
static const uint8_t A19 = 20;
|
||||
|
||||
static const uint8_t T1 = 1;
|
||||
static const uint8_t T2 = 2;
|
||||
static const uint8_t T3 = 3;
|
||||
static const uint8_t T4 = 4;
|
||||
static const uint8_t T5 = 5;
|
||||
static const uint8_t T6 = 6;
|
||||
static const uint8_t T7 = 7;
|
||||
static const uint8_t T8 = 8;
|
||||
static const uint8_t T9 = 9;
|
||||
static const uint8_t T10 = 10;
|
||||
static const uint8_t T11 = 11;
|
||||
static const uint8_t T12 = 12;
|
||||
static const uint8_t T13 = 13;
|
||||
static const uint8_t T14 = 14;
|
||||
|
||||
static const uint8_t RST_LoRa = 12;
|
||||
static const uint8_t BUSY_LoRa = 13;
|
||||
static const uint8_t DIO1 = 14;
|
||||
|
||||
#endif /* Pins_Arduino_h */
|
||||
84
variants/heltec_vision_master_e213/platformio.ini
Normal file
84
variants/heltec_vision_master_e213/platformio.ini
Normal file
|
|
@ -0,0 +1,84 @@
|
|||
[Heltec_Vision_Master_E213_base]
|
||||
extends = esp32_base
|
||||
board = heltec_vision_master_e213
|
||||
build_flags =
|
||||
${esp32_base.build_flags}
|
||||
-I variants/heltec_vision_master_e213
|
||||
-D HELTEC_VISION_MASTER_E213
|
||||
-D RADIO_CLASS=CustomSX1262
|
||||
-D WRAPPER_CLASS=CustomSX1262Wrapper
|
||||
-D LORA_TX_POWER=22
|
||||
-D P_LORA_TX_LED=45
|
||||
-D PIN_USER_BTN=0
|
||||
-D PIN_VEXT_EN=18
|
||||
-D PIN_VEXT_EN_ACTIVE=HIGH
|
||||
-D PIN_VBAT_READ=7
|
||||
-D PIN_ADC_CTRL=46
|
||||
-D SX126X_DIO2_AS_RF_SWITCH=true
|
||||
-D SX126X_DIO3_TCXO_VOLTAGE=1.8
|
||||
-D SX126X_CURRENT_LIMIT=140
|
||||
-D SX126X_RX_BOOSTED_GAIN=1
|
||||
-D PIN_BOARD_SDA=39
|
||||
-D PIN_BOARD_SCL=38
|
||||
-D DISP_CS=5
|
||||
-D DISP_BUSY=1
|
||||
-D DISP_DC=2
|
||||
-D DISP_RST=3
|
||||
-D DISP_SCLK=4
|
||||
-D DISP_MOSI=6
|
||||
-D Vision_Master_E213
|
||||
build_src_filter = ${esp32_base.build_src_filter}
|
||||
+<../variants/heltec_vision_master_e213>
|
||||
lib_deps =
|
||||
${esp32_base.lib_deps}
|
||||
https://github.com/Quency-D/heltec-eink-modules/archive/563dd41fd850a1bc3039b8723da4f3a20fe1c800.zip
|
||||
|
||||
[env:Heltec_Vision_Master_E213_radio_ble]
|
||||
extends = Heltec_Vision_Master_E213_base
|
||||
build_flags =
|
||||
${Heltec_Vision_Master_E213_base.build_flags}
|
||||
-D MAX_CONTACTS=100
|
||||
-D MAX_GROUP_CHANNELS=8
|
||||
-D DISPLAY_CLASS=E213Display
|
||||
-D BLE_PIN_CODE=123456 ; dynamic, random PIN
|
||||
-D BLE_DEBUG_LOGGING=1
|
||||
-D OFFLINE_QUEUE_SIZE=256
|
||||
build_src_filter = ${Heltec_Vision_Master_E213_base.build_src_filter}
|
||||
+<helpers/ui/E213Display.cpp>
|
||||
+<helpers/esp32/*.cpp>
|
||||
+<../examples/companion_radio>
|
||||
lib_deps =
|
||||
${Heltec_Vision_Master_E213_base.lib_deps}
|
||||
densaugeo/base64 @ ~1.4.0
|
||||
|
||||
[env:Heltec_Vision_Master_E213_repeater]
|
||||
extends = Heltec_Vision_Master_E213_base
|
||||
build_flags =
|
||||
${Heltec_Vision_Master_E213_base.build_flags}
|
||||
-D DISPLAY_CLASS=E213Display
|
||||
-D ADVERT_NAME='"Heltec E213 Repeater"'
|
||||
-D ADVERT_LAT=0.0
|
||||
-D ADVERT_LON=0.0
|
||||
build_src_filter = ${Heltec_Vision_Master_E213_base.build_src_filter}
|
||||
+<helpers/ui/E213Display.cpp>
|
||||
+<../examples/simple_repeater>
|
||||
lib_deps =
|
||||
${Heltec_Vision_Master_E213_base.lib_deps}
|
||||
${esp32_ota.lib_deps}
|
||||
|
||||
[env:Heltec_Vision_Master_E213_room_server]
|
||||
extends = Heltec_Vision_Master_E213_base
|
||||
build_flags =
|
||||
${Heltec_Vision_Master_E213_base.build_flags}
|
||||
-D DISPLAY_CLASS=E213Display
|
||||
-D ADVERT_NAME='"Heltec E213 Room"'
|
||||
-D ADVERT_LAT=0.0
|
||||
-D ADVERT_LON=0.0
|
||||
-D ADMIN_PASSWORD='"password"'
|
||||
-D ROOM_PASSWORD='"hello"'
|
||||
build_src_filter = ${Heltec_Vision_Master_E213_base.build_src_filter}
|
||||
+<helpers/ui/E213Display.cpp>
|
||||
+<../examples/simple_room_server>
|
||||
lib_deps =
|
||||
${Heltec_Vision_Master_E213_base.lib_deps}
|
||||
${esp32_ota.lib_deps}
|
||||
53
variants/heltec_vision_master_e213/target.cpp
Normal file
53
variants/heltec_vision_master_e213/target.cpp
Normal file
|
|
@ -0,0 +1,53 @@
|
|||
#include "target.h"
|
||||
#include <Arduino.h>
|
||||
|
||||
HeltecE213Board board;
|
||||
|
||||
#if defined(P_LORA_SCLK)
|
||||
static SPIClass spi(FSPI);
|
||||
RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, spi);
|
||||
#else
|
||||
RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY);
|
||||
#endif
|
||||
|
||||
WRAPPER_CLASS radio_driver(radio, board);
|
||||
|
||||
ESP32RTCClock fallback_clock;
|
||||
AutoDiscoverRTCClock rtc_clock(fallback_clock);
|
||||
|
||||
SensorManager sensors;
|
||||
|
||||
#ifdef DISPLAY_CLASS
|
||||
DISPLAY_CLASS display;
|
||||
#endif
|
||||
|
||||
bool radio_init() {
|
||||
fallback_clock.begin();
|
||||
rtc_clock.begin(Wire);
|
||||
|
||||
#if defined(P_LORA_SCLK)
|
||||
return radio.std_init(&spi);
|
||||
#else
|
||||
return radio.std_init();
|
||||
#endif
|
||||
}
|
||||
|
||||
uint32_t radio_get_rng_seed() {
|
||||
return radio.random(0x7FFFFFFF);
|
||||
}
|
||||
|
||||
void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
|
||||
radio.setFrequency(freq);
|
||||
radio.setSpreadingFactor(sf);
|
||||
radio.setBandwidth(bw);
|
||||
radio.setCodingRate(cr);
|
||||
}
|
||||
|
||||
void radio_set_tx_power(uint8_t dbm) {
|
||||
radio.setOutputPower(dbm);
|
||||
}
|
||||
|
||||
mesh::LocalIdentity radio_new_identity() {
|
||||
RadioNoiseListener rng(radio);
|
||||
return mesh::LocalIdentity(&rng); // create new random identity
|
||||
}
|
||||
27
variants/heltec_vision_master_e213/target.h
Normal file
27
variants/heltec_vision_master_e213/target.h
Normal file
|
|
@ -0,0 +1,27 @@
|
|||
#pragma once
|
||||
|
||||
#define RADIOLIB_STATIC_ONLY 1
|
||||
#include <RadioLib.h>
|
||||
#include <helpers/radiolib/RadioLibWrappers.h>
|
||||
#include <HeltecE213Board.h>
|
||||
#include <helpers/radiolib/CustomSX1262Wrapper.h>
|
||||
#include <helpers/AutoDiscoverRTCClock.h>
|
||||
#include <helpers/SensorManager.h>
|
||||
#ifdef DISPLAY_CLASS
|
||||
#include <helpers/ui/E213Display.h>
|
||||
#endif
|
||||
|
||||
extern HeltecE213Board board;
|
||||
extern WRAPPER_CLASS radio_driver;
|
||||
extern AutoDiscoverRTCClock rtc_clock;
|
||||
extern SensorManager sensors;
|
||||
|
||||
#ifdef DISPLAY_CLASS
|
||||
extern DISPLAY_CLASS display;
|
||||
#endif
|
||||
|
||||
bool radio_init();
|
||||
uint32_t radio_get_rng_seed();
|
||||
void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
|
||||
void radio_set_tx_power(uint8_t dbm);
|
||||
mesh::LocalIdentity radio_new_identity();
|
||||
|
|
@ -31,7 +31,7 @@ build_src_filter = ${esp32_base.build_src_filter}
|
|||
+<../variants/heltec_wireless_paper>
|
||||
lib_deps =
|
||||
${esp32_base.lib_deps}
|
||||
todd-herbert/heltec-eink-modules @ 4.5.0
|
||||
https://github.com/todd-herbert/heltec-eink-modules/archive/9207eb6ab2b96f66298e0488740218c17b006af7.zip
|
||||
|
||||
[env:Heltec_Wireless_Paper_companion_radio_ble]
|
||||
extends = Heltec_Wireless_Paper_base
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue