meshcore-dev/MeshCore
1
0
Fork 0
mirror of https://github.com/meshcore-dev/MeshCore.git synced 2026-04-20 22:13:47 +00:00
Code Issues Projects Releases Packages Wiki Activity

Merge branch 'dev' into nrf-dcdc

Browse source
This commit is contained in:
fdlamotte 2026-01-27 08:42:58 -04:00 • committed by GitHub
commit 3f3978c7d3
No known key found for this signature in database
GPG key ID: B5690EEEBB952194
92 changed files with 3339 additions and 393 deletions
Download patch file Download diff file Expand all files Collapse all files

34
variants/heltec_t114/T114Board.cpp
View file

@ -3,6 +3,35 @@
#include <Arduino.h>
#include <Wire.h>
#ifdef NRF52_POWER_MANAGEMENT
// Static configuration for power management
// Values come from variant.h defines
const PowerMgtConfig power_config = {
.lpcomp_ain_channel = PWRMGT_LPCOMP_AIN,
.lpcomp_refsel = PWRMGT_LPCOMP_REFSEL,
.voltage_bootlock = PWRMGT_VOLTAGE_BOOTLOCK
};
void T114Board::initiateShutdown(uint8_t reason) {
#if ENV_INCLUDE_GPS == 1
pinMode(GPS_EN, OUTPUT);
digitalWrite(GPS_EN, LOW);
#endif
digitalWrite(SX126X_POWER_EN, LOW);
bool enable_lpcomp = (reason == SHUTDOWN_REASON_LOW_VOLTAGE ||
reason == SHUTDOWN_REASON_BOOT_PROTECT);
pinMode(PIN_BAT_CTL, OUTPUT);
digitalWrite(PIN_BAT_CTL, enable_lpcomp ? HIGH : LOW);
if (enable_lpcomp) {
configureVoltageWake(power_config.lpcomp_ain_channel, power_config.lpcomp_refsel);
}
enterSystemOff(reason);
}
#endif // NRF52_POWER_MANAGEMENT
void T114Board::begin() {
NRF52Board::begin();
NRF_POWER->DCDCEN = 1;
@ -21,6 +50,11 @@ void T114Board::begin() {
#endif
pinMode(SX126X_POWER_EN, OUTPUT);
#ifdef NRF52_POWER_MANAGEMENT
// Boot voltage protection check (may not return if voltage too low)
// We need to call this after we configure SX126X_POWER_EN as output but before we pull high
checkBootVoltage(&power_config);
#endif
digitalWrite(SX126X_POWER_EN, HIGH);
delay(10); // give sx1262 some time to power up
}

13
variants/heltec_t114/T114Board.h
View file

@ -10,6 +10,11 @@
#define MV_LSB (3000.0F / 4096.0F) // 12-bit ADC with 3.0V input range
class T114Board : public NRF52BoardDCDC {
protected:
#ifdef NRF52_POWER_MANAGEMENT
void initiateShutdown(uint8_t reason) override;
#endif
public:
T114Board() : NRF52Board("T114_OTA") {}
void begin();
@ -42,13 +47,13 @@ public:
}
void powerOff() override {
#ifdef LED_PIN
#ifdef LED_PIN
digitalWrite(LED_PIN, HIGH);
#endif
#if ENV_INCLUDE_GPS == 1
#endif
#if ENV_INCLUDE_GPS == 1
pinMode(GPS_EN, OUTPUT);
digitalWrite(GPS_EN, LOW);
#endif
#endif
sd_power_system_off();
}
};

1
variants/heltec_t114/platformio.ini
View file

@ -11,6 +11,7 @@ build_flags = ${nrf52_base.build_flags}
-I variants/heltec_t114
-I src/helpers/ui
-D HELTEC_T114
-D NRF52_POWER_MANAGEMENT
-D P_LORA_DIO_1=20
-D P_LORA_NSS=24
-D P_LORA_RESET=25

12
variants/heltec_t114/variant.h
View file

@ -30,6 +30,14 @@
#define AREF_VOLTAGE (3.0)
// Power management boot protection threshold (millivolts)
// Set to 0 to disable boot protection
#define PWRMGT_VOLTAGE_BOOTLOCK 3300 // Won't boot below this voltage (mV)
// LPCOMP wake configuration (voltage recovery from SYSTEMOFF)
// AIN2 = P0.04 = BATTERY_PIN / PIN_VBAT_READ
#define PWRMGT_LPCOMP_AIN 2
#define PWRMGT_LPCOMP_REFSEL 1 // 2/8 VDD (~3.68-4.04V)
////////////////////////////////////////////////////////////////////////////////
// Number of pins
@ -50,8 +58,8 @@
////////////////////////////////////////////////////////////////////////////////
// I2C pin definition
#define PIN_WIRE_SDA (26) // P0.26
#define PIN_WIRE_SCL (27) // P0.27
#define PIN_WIRE_SDA (16) // P0.16
#define PIN_WIRE_SCL (13) // P0.13
////////////////////////////////////////////////////////////////////////////////
// SPI pin definition

2
variants/heltec_v3/platformio.ini
View file

@ -323,7 +323,7 @@ lib_deps =
extends = Heltec_lora32_v3
build_flags =
${Heltec_lora32_v3.build_flags}
-D MAX_CONTACTS=140
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
; NOTE: DO NOT ENABLE --> -D MESH_PACKET_LOGGING=1
; NOTE: DO NOT ENABLE --> -D MESH_DEBUG=1

6
variants/heltec_v4/HeltecV4Board.cpp
View file

@ -86,5 +86,9 @@ void HeltecV4Board::begin() {
}
const char* HeltecV4Board::getManufacturerName() const {
return "Heltec V4";
#ifdef HELTEC_LORA_V4_TFT
return "Heltec V4 TFT";
#else
return "Heltec V4 OLED";
#endif
}

266
variants/heltec_v4/platformio.ini
View file

@ -20,11 +20,9 @@ build_flags =
-D P_LORA_PA_POWER=7 ;power en
-D P_LORA_PA_EN=2
-D P_LORA_PA_TX_EN=46 ;enable tx
-D PIN_BOARD_SDA=17
-D PIN_BOARD_SCL=18
-D PIN_USER_BTN=0
-D PIN_VEXT_EN=36
-D PIN_VEXT_EN_ACTIVE=HIGH
-D PIN_VEXT_EN_ACTIVE=LOW
-D LORA_TX_POWER=10 ;If it is configured as 10 here, the final output will be 22 dbm.
-D MAX_LORA_TX_POWER=22 ; Max SX1262 output
-D SX126X_DIO2_AS_RF_SWITCH=true
@ -47,10 +45,44 @@ lib_deps =
${esp32_base.lib_deps}
${sensor_base.lib_deps}
[env:heltec_v4_repeater]
[heltec_v4_oled]
extends = Heltec_lora32_v4
build_flags =
${Heltec_lora32_v4.build_flags}
-D HELTEC_LORA_V4_OLED
-D PIN_BOARD_SDA=17
-D PIN_BOARD_SCL=18
-D ENV_PIN_SDA=4
-D ENV_PIN_SCL=3
build_src_filter= ${Heltec_lora32_v4.build_src_filter}
lib_deps = ${Heltec_lora32_v4.lib_deps}
[heltec_v4_tft]
extends = Heltec_lora32_v4
build_flags =
${Heltec_lora32_v4.build_flags}
-D HELTEC_LORA_V4_TFT
-D PIN_BOARD_SDA=4
-D PIN_BOARD_SCL=3
-D DISPLAY_SCALE_X=2.5
-D DISPLAY_SCALE_Y=3.75
-D PIN_TFT_RST=18
-D PIN_TFT_VDD_CTL=-1
-D PIN_TFT_LEDA_CTL=21
-D PIN_TFT_LEDA_CTL_ACTIVE=HIGH
-D PIN_TFT_CS=15
-D PIN_TFT_DC=16
-D PIN_TFT_SCL=17
-D PIN_TFT_SDA=33
build_src_filter= ${Heltec_lora32_v4.build_src_filter}
lib_deps =
${Heltec_lora32_v4.lib_deps}
adafruit/Adafruit ST7735 and ST7789 Library @ ^1.11.0
[env:heltec_v4_repeater]
extends = heltec_v4_oled
build_flags =
${heltec_v4_oled.build_flags}
-D DISPLAY_CLASS=SSD1306Display
-D ADVERT_NAME='"Heltec Repeater"'
-D ADVERT_LAT=0.0
@ -59,18 +91,18 @@ build_flags =
-D MAX_NEIGHBOURS=50
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${Heltec_lora32_v4.build_src_filter}
build_src_filter = ${heltec_v4_oled.build_src_filter}
+<helpers/ui/SSD1306Display.cpp>
+<../examples/simple_repeater>
lib_deps =
${Heltec_lora32_v4.lib_deps}
${heltec_v4_oled.lib_deps}
${esp32_ota.lib_deps}
bakercp/CRC32 @ ^2.0.0
[env:heltec_v4_repeater_bridge_espnow]
extends = Heltec_lora32_v4
extends = heltec_v4_oled
build_flags =
${Heltec_lora32_v4.build_flags}
${heltec_v4_oled.build_flags}
-D DISPLAY_CLASS=SSD1306Display
-D ADVERT_NAME='"ESPNow Bridge"'
-D ADVERT_LAT=0.0
@ -81,18 +113,18 @@ build_flags =
; -D BRIDGE_DEBUG=1
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${Heltec_lora32_v4.build_src_filter}
build_src_filter = ${heltec_v4_oled.build_src_filter}
+<helpers/bridges/ESPNowBridge.cpp>
+<helpers/ui/SSD1306Display.cpp>
+<../examples/simple_repeater>
lib_deps =
${Heltec_lora32_v4.lib_deps}
${heltec_v4_oled.lib_deps}
${esp32_ota.lib_deps}
[env:heltec_v4_room_server]
extends = Heltec_lora32_v4
extends = heltec_v4_oled
build_flags =
${Heltec_lora32_v4.build_flags}
${heltec_v4_oled.build_flags}
-D DISPLAY_CLASS=SSD1306Display
-D ADVERT_NAME='"Heltec Room"'
-D ADVERT_LAT=0.0
@ -101,50 +133,50 @@ build_flags =
-D ROOM_PASSWORD='"hello"'
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${Heltec_lora32_v4.build_src_filter}
build_src_filter = ${heltec_v4_oled.build_src_filter}
+<helpers/ui/SSD1306Display.cpp>
+<../examples/simple_room_server>
lib_deps =
${Heltec_lora32_v4.lib_deps}
${heltec_v4_oled.lib_deps}
${esp32_ota.lib_deps}
[env:heltec_v4_terminal_chat]
extends = Heltec_lora32_v4
extends = heltec_v4_oled
build_flags =
${Heltec_lora32_v4.build_flags}
${heltec_v4_oled.build_flags}
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=1
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${Heltec_lora32_v4.build_src_filter}
build_src_filter = ${heltec_v4_oled.build_src_filter}
+<../examples/simple_secure_chat/main.cpp>
lib_deps =
${Heltec_lora32_v4.lib_deps}
${heltec_v4_oled.lib_deps}
densaugeo/base64 @ ~1.4.0
[env:heltec_v4_companion_radio_usb]
extends = Heltec_lora32_v4
extends = heltec_v4_oled
build_flags =
${Heltec_lora32_v4.build_flags}
${heltec_v4_oled.build_flags}
-I examples/companion_radio/ui-new
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
-D DISPLAY_CLASS=SSD1306Display
; NOTE: DO NOT ENABLE --> -D MESH_PACKET_LOGGING=1
; NOTE: DO NOT ENABLE --> -D MESH_DEBUG=1
build_src_filter = ${Heltec_lora32_v4.build_src_filter}
build_src_filter = ${heltec_v4_oled.build_src_filter}
+<helpers/ui/SSD1306Display.cpp>
+<helpers/ui/MomentaryButton.cpp>
+<../examples/companion_radio/*.cpp>
+<../examples/companion_radio/ui-new/*.cpp>
lib_deps =
${Heltec_lora32_v4.lib_deps}
${heltec_v4_oled.lib_deps}
densaugeo/base64 @ ~1.4.0
[env:heltec_v4_companion_radio_ble]
extends = Heltec_lora32_v4
extends = heltec_v4_oled
build_flags =
${Heltec_lora32_v4.build_flags}
${heltec_v4_oled.build_flags}
-I examples/companion_radio/ui-new
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
@ -155,20 +187,20 @@ build_flags =
-D OFFLINE_QUEUE_SIZE=256
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${Heltec_lora32_v4.build_src_filter}
build_src_filter = ${heltec_v4_oled.build_src_filter}
+<helpers/ui/SSD1306Display.cpp>
+<helpers/ui/MomentaryButton.cpp>
+<helpers/esp32/*.cpp>
+<../examples/companion_radio/*.cpp>
+<../examples/companion_radio/ui-new/*.cpp>
lib_deps =
${Heltec_lora32_v4.lib_deps}
${heltec_v4_oled.lib_deps}
densaugeo/base64 @ ~1.4.0
[env:heltec_v4_companion_radio_wifi]
extends = Heltec_lora32_v4
extends = heltec_v4_oled
build_flags =
${Heltec_lora32_v4.build_flags}
${heltec_v4_oled.build_flags}
-I examples/companion_radio/ui-new
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
@ -176,24 +208,23 @@ build_flags =
-D WIFI_DEBUG_LOGGING=1
-D WIFI_SSID='"myssid"'
-D WIFI_PWD='"mypwd"'
-D OFFLINE_QUEUE_SIZE=256
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${Heltec_lora32_v4.build_src_filter}
build_src_filter = ${heltec_v4_oled.build_src_filter}
+<helpers/ui/SSD1306Display.cpp>
+<helpers/ui/MomentaryButton.cpp>
+<helpers/esp32/*.cpp>
+<../examples/companion_radio/*.cpp>
+<../examples/companion_radio/ui-new/*.cpp>
lib_deps =
${Heltec_lora32_v4.lib_deps}
${heltec_v4_oled.lib_deps}
densaugeo/base64 @ ~1.4.0
[env:heltec_v4_sensor]
extends = Heltec_lora32_v4
extends = heltec_v4_oled
build_flags =
${Heltec_lora32_v4.build_flags}
-D ADVERT_NAME='"Heltec v3 Sensor"'
${heltec_v4_oled.build_flags}
-D ADVERT_NAME='"Heltec v4 Sensor"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
@ -202,9 +233,172 @@ build_flags =
-D DISPLAY_CLASS=SSD1306Display
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${Heltec_lora32_v4.build_src_filter}
build_src_filter = ${heltec_v4_oled.build_src_filter}
+<helpers/ui/SSD1306Display.cpp>
+<../examples/simple_sensor>
lib_deps =
${Heltec_lora32_v4.lib_deps}
${heltec_v4_oled.lib_deps}
${esp32_ota.lib_deps}
[env:heltec_v4_tft_repeater]
extends = heltec_v4_tft
build_flags =
${heltec_v4_tft.build_flags}
-D DISPLAY_CLASS=ST7789LCDDisplay
-D ADVERT_NAME='"Heltec Repeater"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D MAX_NEIGHBOURS=50
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${heltec_v4_tft.build_src_filter}
+<helpers/ui/ST7789LCDDisplay.cpp>
+<../examples/simple_repeater>
lib_deps =
${heltec_v4_tft.lib_deps}
${esp32_ota.lib_deps}
bakercp/CRC32 @ ^2.0.0
[env:heltec_v4_tft_repeater_bridge_espnow]
extends = heltec_v4_tft
build_flags =
${heltec_v4_tft.build_flags}
-D DISPLAY_CLASS=ST7789LCDDisplay
-D ADVERT_NAME='"ESPNow Bridge"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D MAX_NEIGHBOURS=50
-D WITH_ESPNOW_BRIDGE=1
; -D BRIDGE_DEBUG=1
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${heltec_v4_tft.build_src_filter}
+<helpers/bridges/ESPNowBridge.cpp>
+<helpers/ui/ST7789LCDDisplay.cpp>
+<../examples/simple_repeater>
lib_deps =
${heltec_v4_tft.lib_deps}
${esp32_ota.lib_deps}
[env:heltec_v4_tft_room_server]
extends = heltec_v4_tft
build_flags =
${heltec_v4_tft.build_flags}
-D DISPLAY_CLASS=ST7789LCDDisplay
-D ADVERT_NAME='"Heltec Room"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D ROOM_PASSWORD='"hello"'
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${heltec_v4_tft.build_src_filter}
+<helpers/ui/ST7789LCDDisplay.cpp>
+<../examples/simple_room_server>
lib_deps =
${heltec_v4_tft.lib_deps}
${esp32_ota.lib_deps}
[env:heltec_v4_tft_terminal_chat]
extends = heltec_v4_tft
build_flags =
${heltec_v4_tft.build_flags}
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=1
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${heltec_v4_tft.build_src_filter}
+<../examples/simple_secure_chat/main.cpp>
lib_deps =
${heltec_v4_tft.lib_deps}
densaugeo/base64 @ ~1.4.0
[env:heltec_v4_tft_companion_radio_usb]
extends = heltec_v4_tft
build_flags =
${heltec_v4_tft.build_flags}
-I examples/companion_radio/ui-new
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
-D DISPLAY_CLASS=ST7789LCDDisplay
; NOTE: DO NOT ENABLE --> -D MESH_PACKET_LOGGING=1
; NOTE: DO NOT ENABLE --> -D MESH_DEBUG=1
build_src_filter = ${heltec_v4_tft.build_src_filter}
+<helpers/ui/ST7789LCDDisplay.cpp>
+<helpers/ui/MomentaryButton.cpp>
+<../examples/companion_radio/*.cpp>
+<../examples/companion_radio/ui-new/*.cpp>
lib_deps =
${heltec_v4_tft.lib_deps}
densaugeo/base64 @ ~1.4.0
[env:heltec_v4_tft_companion_radio_ble]
extends = heltec_v4_tft
build_flags =
${heltec_v4_tft.build_flags}
-I examples/companion_radio/ui-new
-D DISPLAY_CLASS=ST7789LCDDisplay
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
-D BLE_PIN_CODE=123456 ; dynamic, random PIN
-D AUTO_SHUTDOWN_MILLIVOLTS=3400
-D BLE_DEBUG_LOGGING=1
-D OFFLINE_QUEUE_SIZE=256
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${heltec_v4_tft.build_src_filter}
+<helpers/ui/ST7789LCDDisplay.cpp>
+<helpers/ui/MomentaryButton.cpp>
+<helpers/esp32/*.cpp>
+<../examples/companion_radio/*.cpp>
+<../examples/companion_radio/ui-new/*.cpp>
lib_deps =
${heltec_v4_tft.lib_deps}
densaugeo/base64 @ ~1.4.0
[env:heltec_v4_tft_companion_radio_wifi]
extends = heltec_v4_tft
build_flags =
${heltec_v4_tft.build_flags}
-I examples/companion_radio/ui-new
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
-D DISPLAY_CLASS=ST7789LCDDisplay
-D WIFI_DEBUG_LOGGING=1
-D WIFI_SSID='"myssid"'
-D WIFI_PWD='"mypwd"'
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${heltec_v4_tft.build_src_filter}
+<helpers/ui/ST7789LCDDisplay.cpp>
+<helpers/ui/MomentaryButton.cpp>
+<helpers/esp32/*.cpp>
+<../examples/companion_radio/*.cpp>
+<../examples/companion_radio/ui-new/*.cpp>
lib_deps =
${heltec_v4_tft.lib_deps}
densaugeo/base64 @ ~1.4.0
[env:heltec_v4_tft_sensor]
extends = heltec_v4_tft
build_flags =
${heltec_v4_tft.build_flags}
-D ADVERT_NAME='"Heltec v4 Sensor"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D ENV_PIN_SDA=3
-D ENV_PIN_SCL=4
-D DISPLAY_CLASS=ST7789LCDDisplay
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${heltec_v4_tft.build_src_filter}
+<helpers/ui/ST7789LCDDisplay.cpp>
+<../examples/simple_sensor>
lib_deps =
${heltec_v4_tft.lib_deps}
${esp32_ota.lib_deps}

2
variants/heltec_v4/target.cpp
View file

@ -24,7 +24,7 @@ AutoDiscoverRTCClock rtc_clock(fallback_clock);
#endif
#ifdef DISPLAY_CLASS
DISPLAY_CLASS display;
DISPLAY_CLASS display(&(board.periph_power));
MomentaryButton user_btn(PIN_USER_BTN, 1000, true);
#endif

6
variants/heltec_v4/target.h
View file

@ -9,7 +9,11 @@
#include <helpers/SensorManager.h>
#include <helpers/sensors/EnvironmentSensorManager.h>
#ifdef DISPLAY_CLASS
#include <helpers/ui/SSD1306Display.h>
#ifdef HELTEC_LORA_V4_OLED
#include <helpers/ui/SSD1306Display.h>
#elif defined(HELTEC_LORA_V4_TFT)
#include <helpers/ui/ST7789LCDDisplay.h>
#endif
#include <helpers/ui/MomentaryButton.h>
#endif

8
variants/heltec_wireless_paper/platformio.ini
View file

@ -5,7 +5,7 @@ build_flags =
${esp32_base.build_flags}
-I variants/heltec_wireless_paper
-D HELTEC_WIRELESS_PAPER
-D ARDUINO_USB_CDC_ON_BOOT=1 ; need for Serial
;-D ARDUINO_USB_CDC_ON_BOOT=1 ; this breaks Serial
-D P_LORA_DIO_1=14
-D P_LORA_NSS=8
-D P_LORA_RESET=RADIOLIB_NC
@ -17,8 +17,8 @@ build_flags =
-D WRAPPER_CLASS=CustomSX1262Wrapper
-D LORA_TX_POWER=22
-D P_LORA_TX_LED=18
-D PIN_BOARD_SDA=17
-D PIN_BOARD_SCL=18
;-D PIN_BOARD_SDA=17
;-D PIN_BOARD_SCL=18 ; same GPIO as P_LORA_TX_LED
-D PIN_USER_BTN=0
-D PIN_VEXT_EN=45
-D PIN_VBAT_READ=20
@ -139,4 +139,4 @@ build_src_filter = ${Heltec_Wireless_Paper_base.build_src_filter}
+<../examples/simple_room_server>
lib_deps =
${Heltec_Wireless_Paper_base.lib_deps}
${esp32_ota.lib_deps}
${esp32_ota.lib_deps}

48
variants/ikoka_handheld_nrf/platformio.ini
View file

@ -1,8 +1,5 @@
[ikoka_nrf52]
extends = Xiao_nrf52
lib_deps = ${nrf52_base.lib_deps}
${sensor_base.lib_deps}
densaugeo/base64 @ ~1.4.0
[ikoka_handheld_nrf]
extends = nrf52_base
build_flags = ${nrf52_base.build_flags}
${sensor_base.build_flags}
-I lib/nrf52/s140_nrf52_7.3.0_API/include
@ -26,12 +23,15 @@ build_flags = ${nrf52_base.build_flags}
build_src_filter = ${nrf52_base.build_src_filter}
+<../variants/ikoka_handheld_nrf>
+<helpers/sensors>
lib_deps = ${nrf52_base.lib_deps}
${sensor_base.lib_deps}
densaugeo/base64 @ ~1.4.0
# larger screen has a different driver, this is for the 0.96 inch
[ikoka_nrf52_ssd1306_companion]
lib_deps = ${ikoka_nrf52.lib_deps}
[ikoka_handheld_nrf_ssd1306_companion]
lib_deps = ${ikoka_handheld_nrf.lib_deps}
adafruit/Adafruit SSD1306 @ ^2.5.13
build_flags = ${ikoka_nrf52.build_flags}
build_flags = ${ikoka_handheld_nrf.build_flags}
-D DISPLAY_CLASS=SSD1306Display
-D DISPLAY_ROTATION=0
-D PIN_WIRE_SCL=D6
@ -42,62 +42,62 @@ build_flags = ${ikoka_nrf52.build_flags}
-D OFFLINE_QUEUE_SIZE=256
-D QSPIFLASH=1
-I examples/companion_radio/ui-new
build_src_filter = ${ikoka_nrf52.build_src_filter}
build_src_filter = ${ikoka_handheld_nrf.build_src_filter}
+<helpers/ui/SSD1306Display.cpp>
+<../examples/companion_radio/ui-new/UITask.cpp>
+<../examples/companion_radio/*.cpp>
[env:ikoka_handheld_nrf_e22_30dbm_096_companion_radio_ble]
extends = ikoka_nrf52
build_flags = ${ikoka_nrf52_ssd1306_companion.build_flags}
build_flags = ${ikoka_handheld_nrf_ssd1306_companion.build_flags}
-D BLE_PIN_CODE=123456
-D LORA_TX_POWER=20
build_src_filter = ${ikoka_nrf52_ssd1306_companion.build_src_filter}
build_src_filter = ${ikoka_handheld_nrf_ssd1306_companion.build_src_filter}
+<helpers/nrf52/SerialBLEInterface.cpp>
[env:ikoka_handheld_nrf_e22_30dbm_096_rotated_companion_radio_ble]
extends = ikoka_nrf52
build_flags = ${ikoka_nrf52_ssd1306_companion.build_flags}
build_flags = ${ikoka_handheld_nrf_ssd1306_companion.build_flags}
-D BLE_PIN_CODE=123456
-D LORA_TX_POWER=20
-D DISPLAY_ROTATION=2
build_src_filter = ${ikoka_nrf52_ssd1306_companion.build_src_filter}
-D DISPLAY_ROTATION=2
build_src_filter = ${ikoka_handheld_nrf_ssd1306_companion.build_src_filter}
+<helpers/nrf52/SerialBLEInterface.cpp>
[env:ikoka_handheld_nrf_e22_30dbm_096_companion_radio_usb]
extends = ikoka_nrf52
build_flags = ${ikoka_nrf52_ssd1306_companion.build_flags}
build_flags = ${ikoka_handheld_nrf_ssd1306_companion.build_flags}
-D LORA_TX_POWER=20
build_src_filter = ${ikoka_nrf52_ssd1306_companion.build_src_filter}
build_src_filter = ${ikoka_handheld_nrf_ssd1306_companion.build_src_filter}
[env:ikoka_handheld_nrf_e22_30dbm_096_rotated_companion_radio_usb]
extends = ikoka_nrf52
build_flags = ${ikoka_nrf52_ssd1306_companion.build_flags}
build_flags = ${ikoka_handheld_nrf_ssd1306_companion.build_flags}
-D LORA_TX_POWER=20
-D DISPLAY_ROTATION=2
build_src_filter = ${ikoka_nrf52_ssd1306_companion.build_src_filter}
build_src_filter = ${ikoka_handheld_nrf_ssd1306_companion.build_src_filter}
[env:ikoka_handheld_nrf_e22_30dbm_repeater]
extends = ikoka_nrf52
build_flags =
${ikoka_nrf52.build_flags}
${ikoka_handheld_nrf.build_flags}
-D ADVERT_NAME='"ikoka_handheld Repeater"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D MAX_NEIGHBOURS=50
-D LORA_TX_POWER=20
build_src_filter = ${ikoka_nrf52.build_src_filter}
-D LORA_TX_POWER=20
build_src_filter = ${ikoka_handheld_nrf.build_src_filter}
+<../examples/simple_repeater/*.cpp>
[env:ikoka_handheld_nrf_e22_30dbm_room_server]
extends = ikoka_nrf52
build_flags =
${ikoka_nrf52.build_flags}
${ikoka_handheld_nrf.build_flags}
-D ADVERT_NAME='"ikoka_handheld Room"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D LORA_TX_POWER=20
build_src_filter = ${ikoka_nrf52.build_src_filter}
-D LORA_TX_POWER=20
build_src_filter = ${ikoka_handheld_nrf.build_src_filter}
+<../examples/simple_room_server/*.cpp>

104
variants/ikoka_nano_nrf/platformio.ini
View file

@ -1,151 +1,124 @@
[nrf52840_xiao]
[ikoka_nano_nrf]
extends = nrf52_base
platform_packages =
toolchain-gccarmnoneeabi@~1.100301.0
framework-arduinoadafruitnrf52
board = seeed-xiao-afruitnrf52-nrf52840
board_build.ldscript = boards/nrf52840_s140_v7.ld
build_flags = ${nrf52_base.build_flags}
${sensor_base.build_flags}
-D NRF52_PLATFORM -D XIAO_NRF52
-I lib/nrf52/s140_nrf52_7.3.0_API/include
-I lib/nrf52/s140_nrf52_7.3.0_API/include/nrf52
lib_ignore =
BluetoothOTA
lvgl
lib5b4
lib_deps =
${nrf52_base.lib_deps}
rweather/Crypto @ ^0.4.0
adafruit/Adafruit INA3221 Library @ ^1.0.1
adafruit/Adafruit INA219 @ ^1.2.3
adafruit/Adafruit AHTX0 @ ^2.0.5
adafruit/Adafruit BME280 Library @ ^2.3.0
adafruit/Adafruit SSD1306 @ ^2.5.13
[ikoka_nano_nrf_baseboard]
extends = nrf52840_xiao
;board_build.ldscript = boards/nrf52840_s140_v7.ld
build_flags = ${nrf52840_xiao.build_flags}
-D P_LORA_TX_LED=11
-I variants/ikoka_nano_nrf
-I src/helpers/nrf52
-D P_LORA_TX_LED=11
-D DISPLAY_CLASS=NullDisplayDriver
-D RADIO_CLASS=CustomSX1262
-D WRAPPER_CLASS=CustomSX1262Wrapper
-D P_LORA_DIO_1=D1
; -D P_LORA_BUSY=D3
-D P_LORA_BUSY=D2 ; specific to ikoka nano variant.
; -D P_LORA_RESET=D2
-D P_LORA_RESET=D3 ; specific to ikoka nano variant.
; -D P_LORA_NSS=D4
-D P_LORA_NSS=D0 ; specific to ikoka nano variant.
; -D SX126X_RXEN=D5
-D P_LORA_BUSY=D2
-D P_LORA_RESET=D3
-D P_LORA_NSS=D0
-D SX126X_RXEN=D7
-D SX126X_TXEN=RADIOLIB_NC
-D SX126X_DIO2_AS_RF_SWITCH=1
-D SX126X_DIO3_TCXO_VOLTAGE=1.8
-D SX126X_CURRENT_LIMIT=140
-D SX126X_RX_BOOSTED_GAIN=1
-D PIN_WIRE_SCL=5 ; specific to ikoka nano variant.
-D PIN_WIRE_SDA=4 ; specific to ikoka nano variant.
-D ENV_INCLUDE_AHTX0=1
-D ENV_INCLUDE_BME280=1
-D ENV_INCLUDE_INA3221=1
-D ENV_INCLUDE_INA219=1
-D PIN_WIRE_SCL=5
-D PIN_WIRE_SDA=4
-UENV_INCLUDE_GPS
debug_tool = jlink
upload_protocol = nrfutil
;;; abstracted hardware variants
lib_deps = ${nrf52_base.lib_deps}
${sensor_base.lib_deps}
[ikoka_nano_nrf_e22_22dbm]
extends = ikoka_nano_nrf_baseboard
extends = ikoka_nano_nrf
; No PA in this model, full 22dBm
build_flags =
${ikoka_nano_nrf_baseboard.build_flags}
${ikoka_nano_nrf.build_flags}
-D MANUFACTURER_STRING='"Ikoka Nano-E22-22dBm (Xiao_nrf52)"'
-D LORA_TX_POWER=22
build_src_filter = ${nrf52840_xiao.build_src_filter}
build_src_filter = ${ikoka_nano_nrf.build_src_filter}
+<helpers/*.cpp>
+<helpers/sensors>
+<helpers/ui/NullDisplayDriver.cpp>
+<../variants/ikoka_nano_nrf>
[ikoka_nano_nrf_e22_30dbm]
extends = ikoka_nano_nrf_baseboard
extends = ikoka_nano_nrf
; limit txpower to 20dBm on E22-900M30S. Anything higher will
; cause distortion in the PA output. 20dBm in -> 30dBm out
build_flags =
${ikoka_nano_nrf_baseboard.build_flags}
${ikoka_nano_nrf.build_flags}
-D MANUFACTURER_STRING='"Ikoka Nano-E22-30dBm (Xiao_nrf52)"'
-D LORA_TX_POWER=20
build_src_filter = ${nrf52840_xiao.build_src_filter}
build_src_filter = ${ikoka_nano_nrf.build_src_filter}
+<helpers/*.cpp>
+<helpers/sensors>
+<helpers/ui/NullDisplayDriver.cpp>
+<../variants/ikoka_nano_nrf>
[ikoka_nano_nrf_e22_33dbm]
extends = ikoka_nano_nrf_baseboard
extends = ikoka_nano_nrf
; limit txpower to 9dBm on E22-900M33S to avoid hardware damage
; to the rf amplifier frontend. 9dBm in -> 33dBm out
build_flags =
${ikoka_nano_nrf_baseboard.build_flags}
${ikoka_nano_nrf.build_flags}
-D MANUFACTURER_STRING='"Ikoka Nano-E22-33dBm (Xiao_nrf52)"'
-D LORA_TX_POWER=9
build_src_filter = ${nrf52840_xiao.build_src_filter}
build_src_filter = ${ikoka_nano_nrf.build_src_filter}
+<helpers/*.cpp>
+<helpers/sensors>
+<helpers/ui/NullDisplayDriver.cpp>
+<../variants/ikoka_nano_nrf>
;;; abstracted firmware roles
[ikoka_nano_nrf_companion_radio_ble]
extends = ikoka_nano_nrf_baseboard
extends = ikoka_nano_nrf
board_build.ldscript = boards/nrf52840_s140_v7_extrafs.ld
board_upload.maximum_size = 708608
build_flags =
${ikoka_nano_nrf_baseboard.build_flags}
${ikoka_nano_nrf.build_flags}
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
-D BLE_PIN_CODE=123456
-D OFFLINE_QUEUE_SIZE=256
-I examples/companion_radio/ui-new
-D QSPIFLASH=1
; -D BLE_DEBUG_LOGGING=1
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${ikoka_nano_nrf_baseboard.build_src_filter}
build_src_filter = ${ikoka_nano_nrf.build_src_filter}
+<helpers/nrf52/SerialBLEInterface.cpp>
+<../examples/companion_radio/*.cpp>
+<../examples/companion_radio/ui-new/*.cpp>
lib_deps =
${ikoka_nano_nrf_baseboard.lib_deps}
${ikoka_nano_nrf.lib_deps}
densaugeo/base64 @ ~1.4.0
[ikoka_nano_nrf_companion_radio_usb]
extends = ikoka_nano_nrf_baseboard
extends = ikoka_nano_nrf
board_build.ldscript = boards/nrf52840_s140_v7_extrafs.ld
board_upload.maximum_size = 708608
build_flags =
${ikoka_nano_nrf_baseboard.build_flags}
${ikoka_nano_nrf.build_flags}
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
-I examples/companion_radio/ui-new
-D QSPIFLASH=1
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${ikoka_nano_nrf_baseboard.build_src_filter}
build_src_filter = ${ikoka_nano_nrf.build_src_filter}
+<helpers/nrf52/SerialBLEInterface.cpp>
+<../examples/companion_radio/*.cpp>
+<../examples/companion_radio/ui-new/*.cpp>
lib_deps =
${ikoka_nano_nrf_baseboard.lib_deps}
${ikoka_nano_nrf.lib_deps}
densaugeo/base64 @ ~1.4.0
[ikoka_nano_nrf_repeater]
extends = ikoka_nano_nrf_baseboard
extends = ikoka_nano_nrf
build_flags =
${ikoka_nano_nrf_baseboard.build_flags}
${ikoka_nano_nrf.build_flags}
-D ADVERT_NAME='"Ikoka Nano Repeater"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
@ -153,26 +126,23 @@ build_flags =
-D MAX_NEIGHBOURS=50
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${ikoka_nano_nrf_baseboard.build_src_filter}
build_src_filter = ${ikoka_nano_nrf.build_src_filter}
+<../examples/simple_repeater/*.cpp>
[ikoka_nano_nrf_room_server]
extends = ikoka_nano_nrf_baseboard
extends = ikoka_nano_nrf
build_flags =
${ikoka_nano_nrf_baseboard.build_flags}
${ikoka_nano_nrf.build_flags}
-D ADVERT_NAME='"Ikoka Nano Room"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${ikoka_nano_nrf_baseboard.build_src_filter}
build_src_filter = ${ikoka_nano_nrf.build_src_filter}
+<../examples/simple_room_server/*.cpp>
;;; hardware + firmware variants
;;; 22dBm EBYTE E22-900M22 variants
[env:ikoka_nano_nrf_22dbm_companion_radio_usb]
extends =
ikoka_nano_nrf_e22_22dbm
@ -219,7 +189,6 @@ build_src_filter =
;;; 30dBm EBYTE E22-900M30 variants
[env:ikoka_nano_nrf_30dbm_companion_radio_usb]
extends =
ikoka_nano_nrf_e22_30dbm
@ -266,7 +235,6 @@ build_src_filter =
;;; 33dBm EBYTE E22-900M33 variants
[env:ikoka_nano_nrf_33dbm_companion_radio_usb]
extends =
ikoka_nano_nrf_e22_33dbm

85
variants/ikoka_stick_nrf/platformio.ini
View file

@ -1,34 +1,15 @@
[nrf52840_xiao]
[ikoka_stick_nrf]
extends = nrf52_base
platform_packages =
toolchain-gccarmnoneeabi@~1.100301.0
framework-arduinoadafruitnrf52
board = seeed-xiao-afruitnrf52-nrf52840
board_build.ldscript = boards/nrf52840_s140_v7.ld
build_flags = ${nrf52_base.build_flags}
${sensor_base.build_flags}
-D NRF52_PLATFORM -D XIAO_NRF52
-I lib/nrf52/s140_nrf52_7.3.0_API/include
-I lib/nrf52/s140_nrf52_7.3.0_API/include/nrf52
lib_ignore =
BluetoothOTA
lvgl
lib5b4
lib_deps =
${nrf52_base.lib_deps}
rweather/Crypto @ ^0.4.0
adafruit/Adafruit INA3221 Library @ ^1.0.1
adafruit/Adafruit INA219 @ ^1.2.3
adafruit/Adafruit AHTX0 @ ^2.0.5
adafruit/Adafruit BME280 Library @ ^2.3.0
adafruit/Adafruit SSD1306 @ ^2.5.13
[ikoka_stick_nrf_baseboard]
extends = nrf52840_xiao
;board_build.ldscript = boards/nrf52840_s140_v7.ld
build_flags = ${nrf52840_xiao.build_flags}
-D P_LORA_TX_LED=11
-I variants/ikoka_stick_nrf
-I src/helpers/nrf52
-D P_LORA_TX_LED=11
-D DISPLAY_CLASS=SSD1306Display
-D DISPLAY_ROTATION=2
-D RADIO_CLASS=CustomSX1262
@ -46,24 +27,18 @@ build_flags = ${nrf52840_xiao.build_flags}
-D PIN_USER_BTN=0
-D PIN_WIRE_SCL=7
-D PIN_WIRE_SDA=6
-D ENV_INCLUDE_AHTX0=1
-D ENV_INCLUDE_BME280=1
-D ENV_INCLUDE_INA3221=1
-D ENV_INCLUDE_INA219=1
debug_tool = jlink
upload_protocol = nrfutil
;;; abstracted hardware variants
-UENV_INCLUDE_GPS
lib_deps = ${nrf52_base.lib_deps}
${sensor_base.lib_deps}
[ikoka_stick_nrf_e22_22dbm]
extends = ikoka_stick_nrf_baseboard
extends = ikoka_stick_nrf
; No PA in this model, full 22dBm
build_flags =
${ikoka_stick_nrf_baseboard.build_flags}
${ikoka_stick_nrf.build_flags}
-D MANUFACTURER_STRING='"Ikoka Stick-E22-22dBm (Xiao_nrf52)"'
-D LORA_TX_POWER=22
build_src_filter = ${nrf52840_xiao.build_src_filter}
build_src_filter = ${ikoka_stick_nrf.build_src_filter}
+<helpers/*.cpp>
+<helpers/sensors>
+<helpers/ui/MomentaryButton.cpp>
@ -71,14 +46,14 @@ build_src_filter = ${nrf52840_xiao.build_src_filter}
+<../variants/ikoka_stick_nrf>
[ikoka_stick_nrf_e22_30dbm]
extends = ikoka_stick_nrf_baseboard
extends = ikoka_stick_nrf
; limit txpower to 20dBm on E22-900M30S. Anything higher will
; cause distortion in the PA output. 20dBm in -> 30dBm out
build_flags =
${ikoka_stick_nrf_baseboard.build_flags}
${ikoka_stick_nrf.build_flags}
-D MANUFACTURER_STRING='"Ikoka Stick-E22-30dBm (Xiao_nrf52)"'
-D LORA_TX_POWER=20
build_src_filter = ${nrf52840_xiao.build_src_filter}
build_src_filter = ${ikoka_stick_nrf.build_src_filter}
+<helpers/*.cpp>
+<helpers/sensors>
+<helpers/ui/MomentaryButton.cpp>
@ -86,14 +61,14 @@ build_src_filter = ${nrf52840_xiao.build_src_filter}
+<../variants/ikoka_stick_nrf>
[ikoka_stick_nrf_e22_33dbm]
extends = ikoka_stick_nrf_baseboard
extends = ikoka_stick_nrf
; limit txpower to 9dBm on E22-900M33S to avoid hardware damage
; to the rf amplifier frontend. 9dBm in -> 33dBm out
build_flags =
${ikoka_stick_nrf_baseboard.build_flags}
${ikoka_stick_nrf.build_flags}
-D MANUFACTURER_STRING='"Ikoka Stick-E22-33dBm (Xiao_nrf52)"'
-D LORA_TX_POWER=9
build_src_filter = ${nrf52840_xiao.build_src_filter}
build_src_filter = ${ikoka_stick_nrf.build_src_filter}
+<helpers/*.cpp>
+<helpers/sensors>
+<helpers/ui/MomentaryButton.cpp>
@ -103,50 +78,52 @@ build_src_filter = ${nrf52840_xiao.build_src_filter}
;;; abstracted firmware roles
[ikoka_stick_nrf_companion_radio_ble]
extends = ikoka_stick_nrf_baseboard
extends = ikoka_stick_nrf
board_build.ldscript = boards/nrf52840_s140_v7_extrafs.ld
board_upload.maximum_size = 708608
build_flags =
${ikoka_stick_nrf_baseboard.build_flags}
${ikoka_stick_nrf.build_flags}
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
-D BLE_PIN_CODE=123456
-D OFFLINE_QUEUE_SIZE=256
-I examples/companion_radio/ui-new
-D QSPIFLASH=1
; -D BLE_DEBUG_LOGGING=1
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${ikoka_stick_nrf_baseboard.build_src_filter}
build_src_filter = ${ikoka_stick_nrf.build_src_filter}
+<helpers/nrf52/SerialBLEInterface.cpp>
+<../examples/companion_radio/*.cpp>
+<../examples/companion_radio/ui-new/*.cpp>
lib_deps =
${ikoka_stick_nrf_baseboard.lib_deps}
${ikoka_stick_nrf.lib_deps}
densaugeo/base64 @ ~1.4.0
[ikoka_stick_nrf_companion_radio_usb]
extends = ikoka_stick_nrf_baseboard
extends = ikoka_stick_nrf
board_build.ldscript = boards/nrf52840_s140_v7_extrafs.ld
board_upload.maximum_size = 708608
build_flags =
${ikoka_stick_nrf_baseboard.build_flags}
${ikoka_stick_nrf.build_flags}
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
-I examples/companion_radio/ui-new
-D QSPIFLASH=1
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${ikoka_stick_nrf_baseboard.build_src_filter}
build_src_filter = ${ikoka_stick_nrf.build_src_filter}
+<helpers/nrf52/SerialBLEInterface.cpp>
+<../examples/companion_radio/*.cpp>
+<../examples/companion_radio/ui-new/*.cpp>
lib_deps =
${ikoka_stick_nrf_baseboard.lib_deps}
${ikoka_stick_nrf.lib_deps}
densaugeo/base64 @ ~1.4.0
[ikoka_stick_nrf_repeater]
extends = ikoka_stick_nrf_baseboard
extends = ikoka_stick_nrf
build_flags =
${ikoka_stick_nrf_baseboard.build_flags}
${ikoka_stick_nrf.build_flags}
-D ADVERT_NAME='"Ikoka Stick Repeater"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
@ -154,21 +131,21 @@ build_flags =
-D MAX_NEIGHBOURS=50
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${ikoka_stick_nrf_baseboard.build_src_filter}
build_src_filter = ${ikoka_stick_nrf.build_src_filter}
+<helpers/ui/SSD1306Display.cpp>
+<../examples/simple_repeater/*.cpp>
[ikoka_stick_nrf_room_server]
extends = ikoka_stick_nrf_baseboard
extends = ikoka_stick_nrf
build_flags =
${ikoka_stick_nrf_baseboard.build_flags}
${ikoka_stick_nrf.build_flags}
-D ADVERT_NAME='"Ikoka Stick Room"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${ikoka_stick_nrf_baseboard.build_src_filter}
build_src_filter = ${ikoka_stick_nrf.build_src_filter}
+<../examples/simple_room_server/*.cpp>
;;; hardware + firmware variants

2
variants/lilygo_t3s3_sx1276/platformio.ini
View file

@ -138,8 +138,6 @@ build_flags =
-D DISPLAY_CLASS=SSD1306Display
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
-D MESH_PACKET_LOGGING=1
-D MESH_DEBUG=1
build_src_filter = ${LilyGo_T3S3_sx1276.build_src_filter}
+<helpers/ui/SSD1306Display.cpp>
+<helpers/ui/MomentaryButton.cpp>

44
variants/meshtiny/MeshtinyBoard.cpp Normal file
View file

@ -0,0 +1,44 @@
#include "MeshtinyBoard.h"
#include <Arduino.h>
#include <Wire.h>
#include <bluefruit.h>
static BLEDfu bledfu;
static void connect_callback(uint16_t conn_handle) {
(void)conn_handle;
MESH_DEBUG_PRINTLN("BLE client connected");
}
static void disconnect_callback(uint16_t conn_handle, uint8_t reason) {
(void)conn_handle;
(void)reason;
MESH_DEBUG_PRINTLN("BLE client disconnected");
}
void MeshtinyBoard::begin() {
NRF52BoardDCDC::begin();
btn_prev_state = HIGH;
pinMode(PIN_VBAT_READ, INPUT); // VBAT ADC input
// Set all button pins to INPUT_PULLUP
pinMode(PIN_BUTTON1, INPUT_PULLUP);
pinMode(PIN_BUTTON2, INPUT_PULLUP);
pinMode(PIN_BUTTON3, INPUT_PULLUP);
pinMode(PIN_BUTTON4, INPUT_PULLUP);
#if defined(PIN_WIRE_SDA) && defined(PIN_WIRE_SCL)
Wire.setPins(PIN_WIRE_SDA, PIN_WIRE_SCL);
#endif
Wire.begin();
pinMode(SX126X_POWER_EN, OUTPUT);
digitalWrite(SX126X_POWER_EN, HIGH);
delay(10); // give sx1262 some time to power up
}

66
variants/meshtiny/MeshtinyBoard.h Normal file
View file

@ -0,0 +1,66 @@
#pragma once
#include <Arduino.h>
#include <MeshCore.h>
#include <helpers/NRF52Board.h>
class MeshtinyBoard : public NRF52BoardDCDC, public NRF52BoardOTA {
protected:
uint8_t btn_prev_state;
public:
MeshtinyBoard() : NRF52BoardOTA("Meshtiny OTA") {}
void begin();
#if defined(P_LORA_TX_LED)
void onBeforeTransmit() override {
digitalWrite(P_LORA_TX_LED, HIGH); // turn TX LED on
}
void onAfterTransmit() override {
digitalWrite(P_LORA_TX_LED, LOW); // turn TX LED off
}
#endif
uint16_t getBattMilliVolts() override {
int adcvalue = 0;
analogReadResolution(12);
analogReference(AR_INTERNAL_3_0);
delay(10);
adcvalue = analogRead(PIN_VBAT_READ);
return (adcvalue * ADC_MULTIPLIER * AREF_VOLTAGE) / 4.096;
}
const char *getManufacturerName() const override { return "Meshtiny"; }
void reboot() override { NVIC_SystemReset(); }
void powerOff() override {
#ifdef PIN_USER_BTN
while (digitalRead(PIN_USER_BTN) == LOW) {
delay(10);
}
#endif
#ifdef PIN_3V3_EN
pinMode(PIN_3V3_EN, OUTPUT);
digitalWrite(PIN_3V3_EN, LOW);
#endif
#ifdef PIN_LED1
digitalWrite(PIN_LED1, LOW);
#endif
#ifdef PIN_LED2
digitalWrite(PIN_LED2, LOW);
#endif
#ifdef PIN_USER_BTN
nrf_gpio_cfg_sense_input(g_ADigitalPinMap[PIN_USER_BTN], NRF_GPIO_PIN_PULLUP, NRF_GPIO_PIN_SENSE_LOW);
#endif
sd_power_system_off();
}
};

68
variants/meshtiny/platformio.ini Normal file
View file

@ -0,0 +1,68 @@
[Meshtiny]
extends = nrf52_base
board = meshtiny
board_build.ldscript = boards/nrf52840_s140_v6.ld
build_flags = ${nrf52_base.build_flags}
-I lib/nrf52/s140_nrf52_6.1.1_API/include
-I lib/nrf52/s140_nrf52_6.1.1_API/include/nrf52
-I variants/meshtiny
-D RADIO_CLASS=CustomSX1262
-D WRAPPER_CLASS=CustomSX1262Wrapper
-D LORA_TX_POWER=22
-D SX126X_CURRENT_LIMIT=140
-D SX126X_RX_BOOSTED_GAIN=1
-D PIN_3V3_EN=34
-D MESHTINY
-D UI_HAS_JOYSTICK
build_src_filter = ${nrf52_base.build_src_filter}
+<../variants/meshtiny>
+<helpers/ui/SSD1306Display.cpp>
+<helpers/ui/buzzer.cpp>
+<helpers/sensors>
lib_deps =
${nrf52_base.lib_deps}
adafruit/Adafruit SSD1306 @ ^2.5.13
end2endzone/NonBlockingRTTTL@^1.3.0
[env:Meshtiny_companion_radio_usb]
extends = Meshtiny
build_flags =
${Meshtiny.build_flags}
-I examples/companion_radio/ui-new
-D MESHTINY
-D PIN_BUZZER=30
-D DISPLAY_CLASS=SSD1306Display
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
-D OFFLINE_QUEUE_SIZE=256
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${Meshtiny.build_src_filter}
+<../examples/companion_radio/*.cpp>
+<../examples/companion_radio/ui-new/*.cpp>
lib_deps =
${Meshtiny.lib_deps}
densaugeo/base64 @ ~1.4.0
[env:Meshtiny_companion_radio_ble]
extends = Meshtiny
build_flags =
${Meshtiny.build_flags}
-I examples/companion_radio/ui-new
-D MESHTINY
-D PIN_BUZZER=30
-D DISPLAY_CLASS=SSD1306Display
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
-D BLE_PIN_CODE=123456
-D OFFLINE_QUEUE_SIZE=256
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
; -D BLE_DEBUG_LOGGING=1
build_src_filter = ${Meshtiny.build_src_filter}
+<helpers/nrf52/SerialBLEInterface.cpp>
+<../examples/companion_radio/*.cpp>
+<../examples/companion_radio/ui-new/*.cpp>
lib_deps =
${Meshtiny.lib_deps}
densaugeo/base64 @ ~1.4.0

47
variants/meshtiny/target.cpp Normal file
View file

@ -0,0 +1,47 @@
#include "target.h"
#include <Arduino.h>
#include <helpers/ArduinoHelpers.h>
MeshtinyBoard board;
RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, SPI);
WRAPPER_CLASS radio_driver(radio, board);
VolatileRTCClock fallback_clock;
AutoDiscoverRTCClock rtc_clock(fallback_clock);
EnvironmentSensorManager sensors = EnvironmentSensorManager();
#ifdef DISPLAY_CLASS
DISPLAY_CLASS display;
MomentaryButton user_btn(ENCODER_PRESS, 1000, true, true);
MomentaryButton joystick_left(ENCODER_LEFT, 1000, true, true);
MomentaryButton joystick_right(ENCODER_RIGHT, 1000, true, true);
MomentaryButton back_btn(PIN_SIDE_BUTTON, 1000, true, true);
#endif
bool radio_init() {
rtc_clock.begin(Wire);
return radio.std_init(&SPI);
}
uint32_t radio_get_rng_seed() {
return radio.random(0x7FFFFFFF);
}
void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
radio.setFrequency(freq);
radio.setSpreadingFactor(sf);
radio.setBandwidth(bw);
radio.setCodingRate(cr);
}
void radio_set_tx_power(uint8_t dbm) {
radio.setOutputPower(dbm);
}
mesh::LocalIdentity radio_new_identity() {
RadioNoiseListener rng(radio);
return mesh::LocalIdentity(&rng); // create new random identity
}

33
variants/meshtiny/target.h Normal file
View file

@ -0,0 +1,33 @@
#pragma once
#define RADIOLIB_STATIC_ONLY 1
#include <MeshtinyBoard.h>
#include <RadioLib.h>
#include <helpers/ArduinoHelpers.h>
#include <helpers/AutoDiscoverRTCClock.h>
#include <helpers/radiolib/CustomSX1262Wrapper.h>
#include <helpers/radiolib/RadioLibWrappers.h>
#ifdef DISPLAY_CLASS
#include <helpers/ui/MomentaryButton.h>
#include <helpers/ui/SSD1306Display.h>
#endif
#include <helpers/sensors/EnvironmentSensorManager.h>
extern MeshtinyBoard board;
extern WRAPPER_CLASS radio_driver;
extern AutoDiscoverRTCClock rtc_clock;
extern EnvironmentSensorManager sensors;
#ifdef DISPLAY_CLASS
extern DISPLAY_CLASS display;
extern MomentaryButton user_btn;
extern MomentaryButton joystick_left;
extern MomentaryButton joystick_right;
extern MomentaryButton back_btn;
#endif
bool radio_init();
uint32_t radio_get_rng_seed();
void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
void radio_set_tx_power(uint8_t dbm);
mesh::LocalIdentity radio_new_identity();

51
variants/meshtiny/variant.cpp Normal file
View file

@ -0,0 +1,51 @@
/*
Copyright (c) 2014-2015 Arduino LLC. All right reserved.
Copyright (c) 2016 Sandeep Mistry All right reserved.
Copyright (c) 2018, Adafruit Industries (adafruit.com)
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
See the GNU Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include "variant.h"
#include "nrf.h"
#include "wiring_constants.h"
#include "wiring_digital.h"
const uint32_t g_ADigitalPinMap[] = {
// P0
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28,
29, 30, 31,
// P1
32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47
};
void initVariant() {
// LED1 & LED2
#ifdef PIN_LED1
pinMode(PIN_LED1, OUTPUT);
ledOff(PIN_LED1);
#endif
#ifdef PIN_LED2
pinMode(PIN_LED2, OUTPUT);
ledOff(PIN_LED2);
#endif
// 3V3 Power Rail - nothing connected on meshtiny
pinMode(PIN_3V3_EN, OUTPUT);
digitalWrite(PIN_3V3_EN, LOW);
}

98
variants/meshtiny/variant.h Normal file
View file

@ -0,0 +1,98 @@
#ifndef _MESHTINY_H_
#define _MESHTINY_H_
/** Master clock frequency */
#define VARIANT_MCK (64000000ul)
#define USE_LFXO // Board uses 32khz crystal for LF
/*----------------------------------------------------------------------------
* Headers
*----------------------------------------------------------------------------*/
#include "WVariant.h"
#define PINS_COUNT (48)
#define NUM_DIGITAL_PINS (48)
#define NUM_ANALOG_INPUTS (6)
#define NUM_ANALOG_OUTPUTS (0)
// LEDs
#define PIN_LED1 (35) // Green LED
#define PIN_LED2 (36) // Blue LED
#define LED_RED (-1)
#define LED_GREEN PIN_LED1
#define LED_BLUE (-1) // Disable annoying flashing caused by Bluefruit
#define P_LORA_TX_LED PIN_LED2 // Blue LED
// #define PIN_STATUS_LED LED_GREEN // disable status led.
#define LED_BUILTIN LED_GREEN
#define PIN_LED LED_BUILTIN
#define LED_PIN LED_BUILTIN
#define LED_STATE_ON HIGH
// Buttons
#define PIN_BUTTON1 (9) // side button
#define PIN_BUTTON2 (4) // encoder left
#define PIN_BUTTON3 (26) // encoder right
#define PIN_BUTTON4 (28) // encoder press
#define PIN_SIDE_BUTTON PIN_BUTTON1
#define ENCODER_LEFT PIN_BUTTON2
#define ENCODER_RIGHT PIN_BUTTON3
#define ENCODER_PRESS PIN_BUTTON4
#define PIN_USER_BTN PIN_SIDE_BUTTON
// VBAT sensing
#define PIN_VBAT_READ (5)
#define BATTERY_SENSE_RESOLUTION_BITS 12
#define BATTERY_SENSE_RESOLUTION 4096.0
#define AREF_VOLTAGE 3.0
#define VBAT_AR_INTERNAL AR_INTERNAL_3_0
#define ADC_MULTIPLIER 1.73
#define ADC_RESOLUTION 14
// Serial interfaces
#define PIN_SERIAL1_RX (15)
#define PIN_SERIAL1_TX (16)
#define PIN_SERIAL2_RX (8) // Connected to Jlink CDC
#define PIN_SERIAL2_TX (6)
// SPI Interfaces
#define SPI_INTERFACES_COUNT 2
#define PIN_SPI_MISO (45)
#define PIN_SPI_MOSI (44)
#define PIN_SPI_SCK (43)
#define PIN_SPI1_MISO (29)
#define PIN_SPI1_MOSI (30)
#define PIN_SPI1_SCK (3)
// LoRa SX1262 module pins
#define P_LORA_SCLK PIN_SPI_SCK
#define P_LORA_MISO PIN_SPI_MISO
#define P_LORA_MOSI PIN_SPI_MOSI
#define P_LORA_DIO_1 (47)
#define P_LORA_RESET (38)
#define P_LORA_BUSY (46)
#define P_LORA_NSS (42)
#define SX126X_POWER_EN (37)
#define SX126X_RXEN RADIOLIB_NC
#define SX126X_TXEN RADIOLIB_NC
#define SX126X_DIO2_AS_RF_SWITCH true
#define SX126X_DIO3_TCXO_VOLTAGE (1.8f)
// Wire Interfaces
#define WIRE_INTERFACES_COUNT 1
#define PIN_WIRE_SDA (13)
#define PIN_WIRE_SCL (14)
#define PIN_BOARD_SDA (13)
#define PIN_BOARD_SCL (14)
// Power control
#define PIN_3V3_EN (34) // nothing connected on meshtiny board
#endif // _MESHTINY_H_

96
variants/rak3112/RAK3112Board.h Normal file
View file

@ -0,0 +1,96 @@
#pragma once
#include <Arduino.h>
#include <helpers/RefCountedDigitalPin.h>
#include <helpers/ESP32Board.h>
// built-ins
#ifndef PIN_VBAT_READ
#define PIN_VBAT_READ 1
#endif
#ifndef PIN_ADC_CTRL
#define PIN_ADC_CTRL 36
#endif
#define PIN_ADC_CTRL_ACTIVE LOW
#define PIN_ADC_CTRL_INACTIVE HIGH
#define ADC_MULTIPLIER (3 * 1.73 * 1.187 * 1000)
#define BATTERY_SAMPLES 8
#include <driver/rtc_io.h>
class RAK3112Board : public ESP32Board {
private:
bool adc_active_state;
public:
RefCountedDigitalPin periph_power;
RAK3112Board() : periph_power(PIN_VEXT_EN) { }
void begin() {
ESP32Board::begin();
// Auto-detect correct ADC_CTRL pin polarity (different for boards >3.2)
pinMode(PIN_ADC_CTRL, INPUT);
adc_active_state = !digitalRead(PIN_ADC_CTRL);
pinMode(PIN_ADC_CTRL, OUTPUT);
digitalWrite(PIN_ADC_CTRL, !adc_active_state); // Initially inactive
periph_power.begin();
esp_reset_reason_t reason = esp_reset_reason();
if (reason == ESP_RST_DEEPSLEEP) {
long wakeup_source = esp_sleep_get_ext1_wakeup_status();
if (wakeup_source & (1 << P_LORA_DIO_1)) { // received a LoRa packet (while in deep sleep)
startup_reason = BD_STARTUP_RX_PACKET;
}
rtc_gpio_hold_dis((gpio_num_t)P_LORA_NSS);
rtc_gpio_deinit((gpio_num_t)P_LORA_DIO_1);
}
}
void enterDeepSleep(uint32_t secs, int pin_wake_btn = -1) {
esp_sleep_pd_config(ESP_PD_DOMAIN_RTC_PERIPH, ESP_PD_OPTION_ON);
// Make sure the DIO1 and NSS GPIOs are hold on required levels during deep sleep
rtc_gpio_set_direction((gpio_num_t)P_LORA_DIO_1, RTC_GPIO_MODE_INPUT_ONLY);
rtc_gpio_pulldown_en((gpio_num_t)P_LORA_DIO_1);
rtc_gpio_hold_en((gpio_num_t)P_LORA_NSS);
if (pin_wake_btn < 0) {
esp_sleep_enable_ext1_wakeup( (1L << P_LORA_DIO_1), ESP_EXT1_WAKEUP_ANY_HIGH); // wake up on: recv LoRa packet
} else {
esp_sleep_enable_ext1_wakeup( (1L << P_LORA_DIO_1) | (1L << pin_wake_btn), ESP_EXT1_WAKEUP_ANY_HIGH); // wake up on: recv LoRa packet OR wake btn
}
if (secs > 0) {
esp_sleep_enable_timer_wakeup(secs * 1000000);
}
// Finally set ESP32 into sleep
esp_deep_sleep_start(); // CPU halts here and never returns!
}
void powerOff() override {
enterDeepSleep(0);
}
uint16_t getBattMilliVolts() override {
analogReadResolution(12);
uint32_t raw = 0;
for (int i = 0; i < BATTERY_SAMPLES; i++) {
raw += analogRead(PIN_VBAT_READ);
}
raw = raw / BATTERY_SAMPLES;
return (ADC_MULTIPLIER * raw) / 4096;
}
const char* getManufacturerName() const override {
return "RAK 3112";
}
};

223
variants/rak3112/platformio.ini Normal file
View file

@ -0,0 +1,223 @@
[rak3112]
extends = esp32_base
board = esp32-s3-devkitc-1
build_flags =
${esp32_base.build_flags}
${sensor_base.build_flags}
-I variants/rak3112
-D RAK_3112=1
-D ESP32_CPU_FREQ=80
-D P_LORA_DIO_1=47
-D P_LORA_NSS=7
-D P_LORA_RESET=8
-D P_LORA_BUSY=48
-D P_LORA_SCLK=5
-D P_LORA_MISO=3
-D P_LORA_MOSI=6
-D RADIO_CLASS=CustomSX1262
-D WRAPPER_CLASS=CustomSX1262Wrapper
-D LORA_TX_POWER=22
-D P_LORA_TX_LED=46
-D PIN_BOARD_SDA=9
-D PIN_BOARD_SCL=40
-D PIN_USER_BTN=-1
-D PIN_VEXT_EN=14
-D SX126X_DIO2_AS_RF_SWITCH=true
-D SX126X_DIO3_TCXO_VOLTAGE=1.8
-D SX126X_CURRENT_LIMIT=140
-D SX126X_RX_BOOSTED_GAIN=1
-D PIN_GPS_RX=43
-D PIN_GPS_TX=44
; -D PIN_GPS_EN=26
build_src_filter = ${esp32_base.build_src_filter}
+<../variants/rak3112>
+<helpers/sensors>
lib_deps =
${esp32_base.lib_deps}
${sensor_base.lib_deps}
[env:RAK3112_repeater]
extends = rak3112
build_flags =
${rak3112.build_flags}
-D DISPLAY_CLASS=SSD1306Display
-D ADVERT_NAME='"RAK3112 Repeater"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D MAX_NEIGHBOURS=50
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${rak3112.build_src_filter}
+<helpers/ui/SSD1306Display.cpp>
+<../examples/simple_repeater>
lib_deps =
${rak3112.lib_deps}
${esp32_ota.lib_deps}
bakercp/CRC32 @ ^2.0.0
[env:RAK3112_repeater_bridge_rs232]
extends = rak3112
build_flags =
${rak3112.build_flags}
-D DISPLAY_CLASS=SSD1306Display
-D ADVERT_NAME='"RS232 Bridge"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D MAX_NEIGHBOURS=50
-D WITH_RS232_BRIDGE=Serial2
-D WITH_RS232_BRIDGE_RX=5
-D WITH_RS232_BRIDGE_TX=6
; -D BRIDGE_DEBUG=1
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${rak3112.build_src_filter}
+<helpers/bridges/RS232Bridge.cpp>
+<helpers/ui/SSD1306Display.cpp>
+<../examples/simple_repeater>
lib_deps =
${rak3112.lib_deps}
${esp32_ota.lib_deps}
[env:RAK3112_repeater_bridge_espnow]
extends = rak3112
build_flags =
${rak3112.build_flags}
-D DISPLAY_CLASS=SSD1306Display
-D ADVERT_NAME='"ESPNow Bridge"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D MAX_NEIGHBOURS=50
-D WITH_ESPNOW_BRIDGE=1
; -D BRIDGE_DEBUG=1
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${rak3112.build_src_filter}
+<helpers/bridges/ESPNowBridge.cpp>
+<helpers/ui/SSD1306Display.cpp>
+<../examples/simple_repeater>
lib_deps =
${rak3112.lib_deps}
${esp32_ota.lib_deps}
[env:RAK3112_room_server]
extends = rak3112
build_flags =
${rak3112.build_flags}
-D DISPLAY_CLASS=SSD1306Display
-D ADVERT_NAME='"RAK3112 Room"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D ROOM_PASSWORD='"hello"'
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${rak3112.build_src_filter}
+<helpers/ui/SSD1306Display.cpp>
+<../examples/simple_room_server>
lib_deps =
${rak3112.lib_deps}
${esp32_ota.lib_deps}
[env:RAK3112_terminal_chat]
extends = rak3112
build_flags =
${rak3112.build_flags}
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=1
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${rak3112.build_src_filter}
+<../examples/simple_secure_chat/main.cpp>
lib_deps =
${rak3112.lib_deps}
densaugeo/base64 @ ~1.4.0
[env:RAK3112_companion_radio_usb]
extends = rak3112
build_flags =
${rak3112.build_flags}
-I examples/companion_radio/ui-new
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
-D DISPLAY_CLASS=SSD1306Display
; NOTE: DO NOT ENABLE --> -D MESH_PACKET_LOGGING=1
; NOTE: DO NOT ENABLE --> -D MESH_DEBUG=1
build_src_filter = ${rak3112.build_src_filter}
+<helpers/ui/SSD1306Display.cpp>
+<helpers/ui/MomentaryButton.cpp>
+<../examples/companion_radio/*.cpp>
+<../examples/companion_radio/ui-new/*.cpp>
lib_deps =
${rak3112.lib_deps}
densaugeo/base64 @ ~1.4.0
[env:RAK3112_companion_radio_ble]
extends = rak3112
build_flags =
${rak3112.build_flags}
-I examples/companion_radio/ui-new
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
-D DISPLAY_CLASS=SSD1306Display
-D BLE_PIN_CODE=123456 ; dynamic, random PIN
-D AUTO_SHUTDOWN_MILLIVOLTS=3400
-D BLE_DEBUG_LOGGING=1
-D OFFLINE_QUEUE_SIZE=256
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${rak3112.build_src_filter}
+<helpers/ui/SSD1306Display.cpp>
+<helpers/ui/MomentaryButton.cpp>
+<helpers/esp32/*.cpp>
+<../examples/companion_radio/*.cpp>
+<../examples/companion_radio/ui-new/*.cpp>
lib_deps =
${rak3112.lib_deps}
densaugeo/base64 @ ~1.4.0
[env:RAK3112_companion_radio_wifi]
extends = rak3112
build_flags =
${rak3112.build_flags}
-I examples/companion_radio/ui-new
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
-D DISPLAY_CLASS=SSD1306Display
-D WIFI_DEBUG_LOGGING=1
-D WIFI_SSID='"myssid"'
-D WIFI_PWD='"mypwd"'
-D OFFLINE_QUEUE_SIZE=256
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${rak3112.build_src_filter}
+<helpers/ui/SSD1306Display.cpp>
+<helpers/ui/MomentaryButton.cpp>
+<helpers/esp32/*.cpp>
+<../examples/companion_radio/*.cpp>
+<../examples/companion_radio/ui-new/*.cpp>
lib_deps =
${rak3112.lib_deps}
densaugeo/base64 @ ~1.4.0
[env:RAK3112_sensor]
extends = rak3112
build_flags =
${rak3112.build_flags}
-D ADVERT_NAME='"RAK3112 v3 Sensor"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D ENV_PIN_SDA=33
-D ENV_PIN_SCL=34
-D DISPLAY_CLASS=SSD1306Display
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${rak3112.build_src_filter}
+<helpers/ui/SSD1306Display.cpp>
+<../examples/simple_sensor>
lib_deps =
${rak3112.lib_deps}
${esp32_ota.lib_deps}

60
variants/rak3112/target.cpp Normal file
View file

@ -0,0 +1,60 @@
#include <Arduino.h>
#include "target.h"
RAK3112Board board;
#if defined(P_LORA_SCLK)
static SPIClass spi;
RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, spi);
#else
RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY);
#endif
WRAPPER_CLASS radio_driver(radio, board);
ESP32RTCClock fallback_clock;
AutoDiscoverRTCClock rtc_clock(fallback_clock);
#if ENV_INCLUDE_GPS
#include <helpers/sensors/MicroNMEALocationProvider.h>
MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1);
EnvironmentSensorManager sensors = EnvironmentSensorManager(nmea);
#else
EnvironmentSensorManager sensors;
#endif
#ifdef DISPLAY_CLASS
DISPLAY_CLASS display;
MomentaryButton user_btn(PIN_USER_BTN, 1000, true);
#endif
bool radio_init() {
fallback_clock.begin();
rtc_clock.begin(Wire);
#if defined(P_LORA_SCLK)
return radio.std_init(&spi);
#else
return radio.std_init();
#endif
}
uint32_t radio_get_rng_seed() {
return radio.random(0x7FFFFFFF);
}
void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
radio.setFrequency(freq);
radio.setSpreadingFactor(sf);
radio.setBandwidth(bw);
radio.setCodingRate(cr);
}
void radio_set_tx_power(uint8_t dbm) {
radio.setOutputPower(dbm);
}
mesh::LocalIdentity radio_new_identity() {
RadioNoiseListener rng(radio);
return mesh::LocalIdentity(&rng); // create new random identity
}

30
variants/rak3112/target.h Normal file
View file

@ -0,0 +1,30 @@
#pragma once
#define RADIOLIB_STATIC_ONLY 1
#include <RadioLib.h>
#include <helpers/radiolib/RadioLibWrappers.h>
#include <RAK3112Board.h>
#include <helpers/radiolib/CustomSX1262Wrapper.h>
#include <helpers/AutoDiscoverRTCClock.h>
#include <helpers/SensorManager.h>
#include <helpers/sensors/EnvironmentSensorManager.h>
#ifdef DISPLAY_CLASS
#include <helpers/ui/SSD1306Display.h>
#include <helpers/ui/MomentaryButton.h>
#endif
extern RAK3112Board board;
extern WRAPPER_CLASS radio_driver;
extern AutoDiscoverRTCClock rtc_clock;
extern EnvironmentSensorManager sensors;
#ifdef DISPLAY_CLASS
extern DISPLAY_CLASS display;
extern MomentaryButton user_btn;
#endif
bool radio_init();
uint32_t radio_get_rng_seed();
void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
void radio_set_tx_power(uint8_t dbm);
mesh::LocalIdentity radio_new_identity();

32
variants/rak3401/RAK3401Board.cpp Normal file
View file

@ -0,0 +1,32 @@
#include <Arduino.h>
#include <Wire.h>
#include "RAK3401Board.h"
void RAK3401Board::begin() {
NRF52BoardDCDC::begin();
pinMode(PIN_VBAT_READ, INPUT);
#ifdef PIN_USER_BTN
pinMode(PIN_USER_BTN, INPUT_PULLUP);
#endif
#ifdef PIN_USER_BTN_ANA
pinMode(PIN_USER_BTN_ANA, INPUT_PULLUP);
#endif
#if defined(PIN_BOARD_SDA) && defined(PIN_BOARD_SCL)
Wire.setPins(PIN_BOARD_SDA, PIN_BOARD_SCL);
#endif
Wire.begin();
pinMode(PIN_3V3_EN, OUTPUT);
digitalWrite(PIN_3V3_EN, HIGH);
#ifdef P_LORA_PA_EN
// Initialize RAK13302 1W LoRa transceiver module PA control pin
pinMode(P_LORA_PA_EN, OUTPUT);
digitalWrite(P_LORA_PA_EN, LOW); // Start with PA disabled
delay(10); // Allow PA module to initialize
#endif
}

70
variants/rak3401/RAK3401Board.h Normal file
View file

@ -0,0 +1,70 @@
#pragma once
#include <MeshCore.h>
#include <Arduino.h>
#include <helpers/NRF52Board.h>
// LoRa radio module pins for RAK13302
#define P_LORA_SCLK 3
#define P_LORA_MISO 29
#define P_LORA_MOSI 30
#define P_LORA_NSS 26
#define P_LORA_DIO_1 10
#define P_LORA_BUSY 9
#define P_LORA_RESET 4
#ifndef P_LORA_PA_EN
#define P_LORA_PA_EN 31
#endif
//#define PIN_GPS_SDA 13 //GPS SDA pin (output option)
//#define PIN_GPS_SCL 14 //GPS SCL pin (output option)
// #define PIN_GPS_TX 16 //GPS TX pin
// #define PIN_GPS_RX 15 //GPS RX pin
#define PIN_GPS_1PPS 17 //GPS PPS pin
#define GPS_BAUD_RATE 9600
#define GPS_ADDRESS 0x42 //i2c address for GPS
#define SX126X_DIO2_AS_RF_SWITCH
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
// built-ins
#define PIN_VBAT_READ 5
#define ADC_MULTIPLIER (3 * 1.73 * 1.187 * 1000)
#define PIN_3V3_EN (34)
#define WB_IO2 PIN_3V3_EN
class RAK3401Board : public NRF52BoardDCDC, public NRF52BoardOTA {
public:
RAK3401Board() : NRF52BoardOTA("RAK3401_OTA") {}
void begin();
#define BATTERY_SAMPLES 8
uint16_t getBattMilliVolts() override {
analogReadResolution(12);
uint32_t raw = 0;
for (int i = 0; i < BATTERY_SAMPLES; i++) {
raw += analogRead(PIN_VBAT_READ);
}
raw = raw / BATTERY_SAMPLES;
return (ADC_MULTIPLIER * raw) / 4096;
}
const char* getManufacturerName() const override {
return "RAK 3401";
}
#ifdef P_LORA_PA_EN
void onBeforeTransmit() override {
digitalWrite(P_LORA_PA_EN, HIGH); // Enable PA before transmission
}
void onAfterTransmit() override {
digitalWrite(P_LORA_PA_EN, LOW); // Disable PA after transmission to save power
}
#endif
};

127
variants/rak3401/platformio.ini Normal file
View file

@ -0,0 +1,127 @@
[rak3401]
extends = nrf52_base
board = rak3401
board_check = true
build_flags = ${nrf52_base.build_flags}
${sensor_base.build_flags}
-I variants/rak3401
-D RAK_3401
-D RAK13302
-D RADIO_CLASS=CustomSX1262
-D WRAPPER_CLASS=CustomSX1262Wrapper
-D LORA_TX_POWER=22
-D SX126X_CURRENT_LIMIT=140
-D SX126X_RX_BOOSTED_GAIN=1
build_src_filter = ${nrf52_base.build_src_filter}
+<../variants/rak3401>
+<helpers/sensors>
+<helpers/ui/SSD1306Display.cpp>
+<helpers/ui/MomentaryButton.cpp>
lib_deps =
${nrf52_base.lib_deps}
${sensor_base.lib_deps}
adafruit/Adafruit SSD1306 @ ^2.5.13
sparkfun/SparkFun u-blox GNSS Arduino Library@^2.2.27
[env:RAK_3401_repeater]
extends = rak3401
build_flags =
${rak3401.build_flags}
-D DISPLAY_CLASS=SSD1306Display
-D ADVERT_NAME='"RAK3401 1W Repeater"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D MAX_NEIGHBOURS=50
;-D MESH_PACKET_LOGGING=1
;-D MESH_DEBUG=1
build_src_filter = ${rak3401.build_src_filter}
+<helpers/ui/SSD1306Display.cpp>
+<../examples/simple_repeater>
[env:RAK_3401_room_server]
extends = rak3401
build_flags =
${rak3401.build_flags}
-D DISPLAY_CLASS=SSD1306Display
-D ADVERT_NAME='"Test Room"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D ROOM_PASSWORD='"hello"'
;-D MESH_PACKET_LOGGING=1
;-D MESH_DEBUG=1
build_src_filter = ${rak3401.build_src_filter}
+<helpers/ui/SSD1306Display.cpp>
+<../examples/simple_room_server>
[env:RAK_3401_companion_radio_usb]
extends = rak3401
board_build.ldscript = boards/nrf52840_s140_v6_extrafs.ld
board_upload.maximum_size = 712704
build_flags =
${rak3401.build_flags}
-I examples/companion_radio/ui-new
-D DISPLAY_CLASS=SSD1306Display
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
; NOTE: DO NOT ENABLE --> -D MESH_PACKET_LOGGING=1
; NOTE: DO NOT ENABLE --> -D MESH_DEBUG=1
build_src_filter = ${rak3401.build_src_filter}
+<../examples/companion_radio/*.cpp>
+<../examples/companion_radio/ui-new/*.cpp>
lib_deps =
${rak3401.lib_deps}
densaugeo/base64 @ ~1.4.0
[env:RAK_3401_companion_radio_ble]
extends = rak3401
board_build.ldscript = boards/nrf52840_s140_v6_extrafs.ld
board_upload.maximum_size = 712704
build_flags =
${rak3401.build_flags}
-I examples/companion_radio/ui-new
-D DISPLAY_CLASS=SSD1306Display
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
-D BLE_PIN_CODE=123456
-D BLE_DEBUG_LOGGING=1
-D OFFLINE_QUEUE_SIZE=256
;-D MESH_PACKET_LOGGING=1
;-D MESH_DEBUG=1
build_src_filter = ${rak3401.build_src_filter}
+<helpers/nrf52/SerialBLEInterface.cpp>
+<../examples/companion_radio/*.cpp>
+<../examples/companion_radio/ui-new/*.cpp>
lib_deps =
${rak3401.lib_deps}
densaugeo/base64 @ ~1.4.0
[env:RAK_3401_terminal_chat]
extends = rak3401
build_flags =
${rak3401.build_flags}
-D MAX_CONTACTS=100
-D MAX_GROUP_CHANNELS=1
;-D MESH_PACKET_LOGGING=1
;-D MESH_DEBUG=1
build_src_filter = ${rak3401.build_src_filter}
+<../examples/simple_secure_chat/main.cpp>
lib_deps =
${rak3401.lib_deps}
densaugeo/base64 @ ~1.4.0
[env:RAK_3401_sensor]
extends = rak3401
build_flags =
${rak3401.build_flags}
-D DISPLAY_CLASS=SSD1306Display
-D ADVERT_NAME='"RAK3401 Sensor"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
;-D MESH_PACKET_LOGGING=1
;-D MESH_DEBUG=1
build_src_filter = ${rak3401.build_src_filter}
+<helpers/ui/SSD1306Display.cpp>
+<../examples/simple_sensor>

58
variants/rak3401/target.cpp Normal file
View file

@ -0,0 +1,58 @@
#include <Arduino.h>
#include "target.h"
#include <helpers/ArduinoHelpers.h>
RAK3401Board board;
#ifndef PIN_USER_BTN
#define PIN_USER_BTN (-1)
#endif
#ifdef DISPLAY_CLASS
DISPLAY_CLASS display;
MomentaryButton user_btn(PIN_USER_BTN, 1000, true, true);
#if defined(PIN_USER_BTN_ANA)
MomentaryButton analog_btn(PIN_USER_BTN_ANA, 1000, 20);
#endif
#endif
RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, SPI);
WRAPPER_CLASS radio_driver(radio, board);
VolatileRTCClock fallback_clock;
AutoDiscoverRTCClock rtc_clock(fallback_clock);
#if ENV_INCLUDE_GPS
#include <helpers/sensors/MicroNMEALocationProvider.h>
MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1);
EnvironmentSensorManager sensors = EnvironmentSensorManager(nmea);
#else
EnvironmentSensorManager sensors;
#endif
bool radio_init() {
rtc_clock.begin(Wire);
return radio.std_init(&SPI);
}
uint32_t radio_get_rng_seed() {
return radio.random(0x7FFFFFFF);
}
void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
radio.setFrequency(freq);
radio.setSpreadingFactor(sf);
radio.setBandwidth(bw);
radio.setCodingRate(cr);
}
void radio_set_tx_power(uint8_t dbm) {
radio.setOutputPower(dbm);
}
mesh::LocalIdentity radio_new_identity() {
RadioNoiseListener rng(radio);
return mesh::LocalIdentity(&rng); // create new random identity
}

30
variants/rak3401/target.h Normal file
View file

@ -0,0 +1,30 @@
#pragma once
#define RADIOLIB_STATIC_ONLY 1
#include <RadioLib.h>
#include <helpers/radiolib/RadioLibWrappers.h>
#include <RAK3401Board.h>
#include <helpers/radiolib/CustomSX1262Wrapper.h>
#include <helpers/AutoDiscoverRTCClock.h>
#include <helpers/sensors/EnvironmentSensorManager.h>
#ifdef DISPLAY_CLASS
#include <helpers/ui/SSD1306Display.h>
extern DISPLAY_CLASS display;
#include <helpers/ui/MomentaryButton.h>
extern MomentaryButton user_btn;
#if defined(PIN_USER_BTN_ANA)
extern MomentaryButton analog_btn;
#endif
#endif
extern RAK3401Board board;
extern WRAPPER_CLASS radio_driver;
extern AutoDiscoverRTCClock rtc_clock;
extern EnvironmentSensorManager sensors;
bool radio_init();
uint32_t radio_get_rng_seed();
void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
void radio_set_tx_power(uint8_t dbm);
mesh::LocalIdentity radio_new_identity();

52
variants/rak3401/variant.cpp Normal file
View file

@ -0,0 +1,52 @@
/*
Copyright (c) 2014-2015 Arduino LLC. All right reserved.
Copyright (c) 2016 Sandeep Mistry All right reserved.
Copyright (c) 2018, Adafruit Industries (adafruit.com)
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
See the GNU Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include "variant.h"
#include "wiring_constants.h"
#include "wiring_digital.h"
#include "nrf.h"
const uint32_t g_ADigitalPinMap[] =
{
// P0
0 , 1 , 2 , 3 , 4 , 5 , 6 , 7 ,
8 , 9 , 10, 11, 12, 13, 14, 15,
16, 17, 18, 19, 20, 21, 22, 23,
24, 25, 26, 27, 28, 29, 30, 31,
// P1
32, 33, 34, 35, 36, 37, 38, 39,
40, 41, 42, 43, 44, 45, 46, 47
};
void initVariant()
{
// LED1 & LED2
pinMode(PIN_LED1, OUTPUT);
ledOff(PIN_LED1);
pinMode(PIN_LED2, OUTPUT);
ledOff(PIN_LED2);
// 3V3 Power Rail
pinMode(PIN_3V3_EN, OUTPUT);
digitalWrite(PIN_3V3_EN, HIGH);
}

199
variants/rak3401/variant.h Normal file
View file

@ -0,0 +1,199 @@
/*
Copyright (c) 2014-2015 Arduino LLC. All right reserved.
Copyright (c) 2016 Sandeep Mistry All right reserved.
Copyright (c) 2018, Adafruit Industries (adafruit.com)
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
See the GNU Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef _VARIANT_RAK3401_
#define _VARIANT_RAK3401_
#define RAK4630
/** Master clock frequency */
#define VARIANT_MCK (64000000ul)
#define USE_LFXO // Board uses 32khz crystal for LF
// define USE_LFRC // Board uses RC for LF
/*----------------------------------------------------------------------------
* Headers
*----------------------------------------------------------------------------*/
#include "WVariant.h"
#ifdef __cplusplus
extern "C"
{
#endif // __cplusplus
// Number of pins defined in PinDescription array
#define PINS_COUNT (48)
#define NUM_DIGITAL_PINS (48)
#define NUM_ANALOG_INPUTS (6)
#define NUM_ANALOG_OUTPUTS (0)
// LEDs
#define PIN_LED1 (35)
#define PIN_LED2 (36)
#define LED_BUILTIN PIN_LED1
#define LED_CONN PIN_LED2
#define LED_GREEN PIN_LED1
#define LED_BLUE PIN_LED2
#define LED_STATE_ON 1 // State when LED is litted
/*
* Analog pins
*/
#define PIN_A0 (5) //(3)
#define PIN_A1 (31) //(4)
#define PIN_A2 (28)
#define PIN_A3 (29)
#define PIN_A4 (30)
#define PIN_A5 (31)
#define PIN_A6 (0xff)
#define PIN_A7 (0xff)
static const uint8_t A0 = PIN_A0;
static const uint8_t A1 = PIN_A1;
static const uint8_t A2 = PIN_A2;
static const uint8_t A3 = PIN_A3;
static const uint8_t A4 = PIN_A4;
static const uint8_t A5 = PIN_A5;
static const uint8_t A6 = PIN_A6;
static const uint8_t A7 = PIN_A7;
#define ADC_RESOLUTION 14
// Other pins
#define WB_I2C1_SDA (13) // SENSOR_SLOT IO_SLOT
#define WB_I2C1_SCL (14) // SENSOR_SLOT IO_SLOT
#define PIN_AREF (2)
#define PIN_NFC1 (9)
#define WB_IO5 PIN_NFC1
#define WB_IO4 (4)
#define PIN_NFC2 (10)
static const uint8_t AREF = PIN_AREF;
/*
* Serial interfaces
*/
// TXD1 RXD1 on Base Board
#define PIN_SERIAL1_RX (15)
#define PIN_SERIAL1_TX (16)
// Connected to Jlink CDC
#define PIN_SERIAL2_RX (8)
#define PIN_SERIAL2_TX (6)
/*
* SPI Interfaces
*/
#define SPI_INTERFACES_COUNT 2
#define PIN_SPI_MISO (45)
#define PIN_SPI_MOSI (44)
#define PIN_SPI_SCK (43)
#define PIN_SPI1_MISO (29)
#define PIN_SPI1_MOSI (30)
#define PIN_SPI1_SCK (3)
static const uint8_t SS = 42;
static const uint8_t MOSI = PIN_SPI_MOSI;
static const uint8_t MISO = PIN_SPI_MISO;
static const uint8_t SCK = PIN_SPI_SCK;
/*
* Wire Interfaces
*/
#define WIRE_INTERFACES_COUNT 1
#define PIN_WIRE_SDA (WB_I2C1_SDA)
#define PIN_WIRE_SCL (WB_I2C1_SCL)
// QSPI Pins
// QSPI occupied by GPIO's
#define PIN_QSPI_SCK 3
#define PIN_QSPI_CS 26
#define PIN_QSPI_IO0 30
#define PIN_QSPI_IO1 29
#define PIN_QSPI_IO2 28
#define PIN_QSPI_IO3 2
// On-board QSPI Flash
// No onboard flash
#define EXTERNAL_FLASH_DEVICES IS25LP080D
#define EXTERNAL_FLASH_USE_QSPI
#define P_LORA_SCK PIN_SPI1_SCK
#define P_LORA_MISO PIN_SPI1_MISO
#define P_LORA_MOSI PIN_SPI1_MOSI
#define P_LORA_CS 26
#define USE_SX1262
#define SX126X_CS (26)
#define SX126X_DIO1 (10)
#define SX126X_BUSY (9)
#define SX126X_RESET (4)
#define SX126X_POWER_EN (21)
// DIO2 controlls an antenna switch and the TCXO voltage is controlled by DIO3
#define SX126X_DIO2_AS_RF_SWITCH
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
// enables 3.3V periphery like GPS or IO Module
// Do not toggle this for GPS power savings
#define PIN_3V3_EN (34)
#define WB_IO2 PIN_3V3_EN
// RAK1910 GPS module
// If using the wisblock GPS module and pluged into Port A on WisBlock base
// IO1 is hooked to PPS (pin 12 on header) = gpio 17
// IO2 is hooked to GPS RESET = gpio 34, but it can not be used to this because IO2 is ALSO used to control 3V3_S power (1 is on).
// Therefore must be 1 to keep peripherals powered
// Power is on the controllable 3V3_S rail
#define PIN_GPS_PPS (17) // Pulse per second input from the GPS
#define PIN_GPS_RX PIN_SERIAL1_RX
#define PIN_GPS_TX PIN_SERIAL1_TX
// Battery
// The battery sense is hooked to pin A0 (5)
#define BATTERY_PIN PIN_A0
// and has 12 bit resolution
#define BATTERY_SENSE_RESOLUTION_BITS 12
#define BATTERY_SENSE_RESOLUTION 4096.0
#undef AREF_VOLTAGE
#define AREF_VOLTAGE 3.0
#define VBAT_AR_INTERNAL AR_INTERNAL_3_0
#define ADC_MULTIPLIER 1.73
#define HAS_RTC 1
#define RAK_4631 1
#ifdef __cplusplus
}
#endif
/*----------------------------------------------------------------------------
* Arduino objects - C++ only
*----------------------------------------------------------------------------*/
#endif

27
variants/rak4631/RAK4631Board.cpp
View file

@ -3,6 +3,28 @@
#include "RAK4631Board.h"
#ifdef NRF52_POWER_MANAGEMENT
// Static configuration for power management
// Values set in variant.h defines
const PowerMgtConfig power_config = {
.lpcomp_ain_channel = PWRMGT_LPCOMP_AIN,
.lpcomp_refsel = PWRMGT_LPCOMP_REFSEL,
.voltage_bootlock = PWRMGT_VOLTAGE_BOOTLOCK
};
void RAK4631Board::initiateShutdown(uint8_t reason) {
// Disable LoRa module power before shutdown
digitalWrite(SX126X_POWER_EN, LOW);
if (reason == SHUTDOWN_REASON_LOW_VOLTAGE ||
reason == SHUTDOWN_REASON_BOOT_PROTECT) {
configureVoltageWake(power_config.lpcomp_ain_channel, power_config.lpcomp_refsel);
}
enterSystemOff(reason);
}
#endif // NRF52_POWER_MANAGEMENT
void RAK4631Board::begin() {
NRF52BoardDCDC::begin();
pinMode(PIN_VBAT_READ, INPUT);
@ -21,6 +43,11 @@ void RAK4631Board::begin() {
Wire.begin();
pinMode(SX126X_POWER_EN, OUTPUT);
#ifdef NRF52_POWER_MANAGEMENT
// Boot voltage protection check (may not return if voltage too low)
// We need to call this after we configure SX126X_POWER_EN as output but before we pull high
checkBootVoltage(&power_config);
#endif
digitalWrite(SX126X_POWER_EN, HIGH);
delay(10); // give sx1262 some time to power up
}

5
variants/rak4631/RAK4631Board.h
View file

@ -30,6 +30,11 @@
#define ADC_MULTIPLIER (3 * 1.73 * 1.187 * 1000)
class RAK4631Board : public NRF52BoardDCDC {
protected:
#ifdef NRF52_POWER_MANAGEMENT
void initiateShutdown(uint8_t reason) override;
#endif
public:
RAK4631Board() : NRF52Board("RAK4631_OTA") {}
void begin();

1
variants/rak4631/platformio.ini
View file

@ -7,6 +7,7 @@ build_flags = ${nrf52_base.build_flags}
-I variants/rak4631
-D RAK_4631
-D RAK_BOARD
-D NRF52_POWER_MANAGEMENT
-D PIN_BOARD_SCL=14
-D PIN_BOARD_SDA=13
-D PIN_GPS_TX=PIN_SERIAL1_RX

8
variants/rak4631/variant.h
View file

@ -104,6 +104,14 @@ extern "C"
static const uint8_t A7 = PIN_A7;
#define ADC_RESOLUTION 14
// Power management boot protection threshold (millivolts)
// Set to 0 to disable boot protection
#define PWRMGT_VOLTAGE_BOOTLOCK 3300 // Won't boot below this voltage (mV)
// LPCOMP wake configuration (voltage recovery from SYSTEMOFF)
// AIN3 = P0.05 = PIN_A0 / PIN_VBAT_READ
#define PWRMGT_LPCOMP_AIN 3
#define PWRMGT_LPCOMP_REFSEL 4 // 5/8 VDD (~3.13-3.44V)
// Other pins
#define PIN_AREF (2)
#define PIN_NFC1 (9)

3
variants/station_g2/platformio.ini
View file

@ -16,7 +16,8 @@ build_flags =
-D P_LORA_SCLK=12
-D P_LORA_MISO=14
-D P_LORA_MOSI=13
-D LORA_TX_POWER=19
-D LORA_TX_POWER=7 ; configured as 7dbm, because the final output will be ~27dbm (~0.5w) if the PA is enabled.
-D MAX_LORA_TX_POWER=19 ; max output without burning out the PA
; -D P_LORA_TX_LED=35
-D PIN_BOARD_SDA=5
-D PIN_BOARD_SCL=6

1
variants/t1000-e/platformio.ini
View file

@ -107,6 +107,7 @@ build_flags = ${t1000-e.build_flags}
-D DISPLAY_CLASS=NullDisplayDriver
-D PIN_BUZZER=25
-D PIN_BUZZER_EN=37 ; P1/5 - required for T1000-E
-D ADVERT_NAME='"@@MAC"'
build_src_filter = ${t1000-e.build_src_filter}
+<helpers/nrf52/SerialBLEInterface.cpp>
+<helpers/ui/buzzer.cpp>

1
variants/thinknode_m1/platformio.ini
View file

@ -83,6 +83,7 @@ build_flags =
-D PIN_BUZZER=6
-D AUTO_SHUTDOWN_MILLIVOLTS=3300
-D QSPIFLASH=1
-D ENV_INCLUDE_GPS=1
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${ThinkNode_M1.build_src_filter}

2
variants/thinknode_m1/target.cpp
View file

@ -11,7 +11,7 @@ WRAPPER_CLASS radio_driver(radio, board);
VolatileRTCClock fallback_clock;
AutoDiscoverRTCClock rtc_clock(fallback_clock);
MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1);
MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1, &rtc_clock);
ThinkNodeM1SensorManager sensors = ThinkNodeM1SensorManager(nmea);
#ifdef DISPLAY_CLASS

1
variants/thinknode_m1/target.h
View file

@ -22,6 +22,7 @@ class ThinkNodeM1SensorManager : public SensorManager {
void stop_gps();
public:
ThinkNodeM1SensorManager(LocationProvider &location): _location(&location) { }
LocationProvider* getLocationProvider() override { return _location; }
bool begin() override;
bool querySensors(uint8_t requester_permissions, CayenneLPP& telemetry) override;
void loop() override;

1
variants/wio-tracker-l1/platformio.ini
View file

@ -95,6 +95,7 @@ build_flags = ${WioTrackerL1.build_flags}
-D UI_HAS_JOYSTICK=1
-D PIN_BUZZER=12
-D QSPIFLASH=1
-D ADVERT_NAME='"@@MAC"'
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${WioTrackerL1.build_src_filter}

47
variants/xiao_nrf52/XiaoNrf52Board.cpp
View file

@ -5,12 +5,40 @@
#include "XiaoNrf52Board.h"
#ifdef NRF52_POWER_MANAGEMENT
// Static configuration for power management
// Values set in variant.h defines
const PowerMgtConfig power_config = {
.lpcomp_ain_channel = PWRMGT_LPCOMP_AIN,
.lpcomp_refsel = PWRMGT_LPCOMP_REFSEL,
.voltage_bootlock = PWRMGT_VOLTAGE_BOOTLOCK
};
void XiaoNrf52Board::initiateShutdown(uint8_t reason) {
bool enable_lpcomp = (reason == SHUTDOWN_REASON_LOW_VOLTAGE ||
reason == SHUTDOWN_REASON_BOOT_PROTECT);
pinMode(VBAT_ENABLE, OUTPUT);
digitalWrite(VBAT_ENABLE, enable_lpcomp ? LOW : HIGH);
if (enable_lpcomp) {
configureVoltageWake(power_config.lpcomp_ain_channel, power_config.lpcomp_refsel);
}
enterSystemOff(reason);
}
#endif // NRF52_POWER_MANAGEMENT
void XiaoNrf52Board::begin() {
NRF52BoardDCDC::begin();
// Configure battery voltage ADC
pinMode(PIN_VBAT, INPUT);
pinMode(VBAT_ENABLE, OUTPUT);
digitalWrite(VBAT_ENABLE, HIGH);
digitalWrite(VBAT_ENABLE, LOW); // Enable VBAT divider for reading
analogReadResolution(12);
analogReference(AR_INTERNAL_3_0);
delay(50); // Allow ADC to settle
#ifdef PIN_USER_BTN
pinMode(PIN_USER_BTN, INPUT_PULLUP);
@ -27,9 +55,20 @@ void XiaoNrf52Board::begin() {
digitalWrite(P_LORA_TX_LED, HIGH);
#endif
// pinMode(SX126X_POWER_EN, OUTPUT);
// digitalWrite(SX126X_POWER_EN, HIGH);
delay(10); // give sx1262 some time to power up
#ifdef NRF52_POWER_MANAGEMENT
// Boot voltage protection check (may not return if voltage too low)
checkBootVoltage(&power_config);
#endif
delay(10); // Give sx1262 some time to power up
}
uint16_t XiaoNrf52Board::getBattMilliVolts() {
// https://wiki.seeedstudio.com/XIAO_BLE#q3-what-are-the-considerations-when-using-xiao-nrf52840-sense-for-battery-charging
// VBAT_ENABLE must be LOW to read battery voltage
digitalWrite(VBAT_ENABLE, LOW);
int adcvalue = analogRead(PIN_VBAT);
return (adcvalue * ADC_MULTIPLIER * AREF_VOLTAGE) / 4.096;
}
#endif

21
variants/xiao_nrf52/XiaoNrf52Board.h
View file

@ -7,6 +7,11 @@
#ifdef XIAO_NRF52
class XiaoNrf52Board : public NRF52BoardDCDC {
protected:
#if NRF52_POWER_MANAGEMENT
void initiateShutdown(uint8_t reason) override;
#endif
public:
XiaoNrf52Board() : NRF52Board("XIAO_NRF52_OTA") {}
void begin();
@ -20,21 +25,7 @@ public:
}
#endif
uint16_t getBattMilliVolts() override {
// Please read befor going further ;)
// https://wiki.seeedstudio.com/XIAO_BLE#q3-what-are-the-considerations-when-using-xiao-nrf52840-sense-for-battery-charging
// We can't drive VBAT_ENABLE to HIGH as long
// as we don't know wether we are charging or not ...
// this is a 3mA loss (4/1500)
digitalWrite(VBAT_ENABLE, LOW);
int adcvalue = 0;
analogReadResolution(12);
analogReference(AR_INTERNAL_3_0);
delay(10);
adcvalue = analogRead(PIN_VBAT);
return (adcvalue * ADC_MULTIPLIER * AREF_VOLTAGE) / 4.096;
}
uint16_t getBattMilliVolts() override;
const char* getManufacturerName() const override {
return "Seeed Xiao-nrf52";

1
variants/xiao_nrf52/platformio.ini
View file

@ -9,6 +9,7 @@ build_flags = ${nrf52_base.build_flags}
-I variants/xiao_nrf52
-UENV_INCLUDE_GPS
-D NRF52_PLATFORM
-D NRF52_POWER_MANAGEMENT
-D XIAO_NRF52
-D RADIO_CLASS=CustomSX1262
-D WRAPPER_CLASS=CustomSX1262Wrapper

15
variants/xiao_nrf52/variant.h
View file

@ -75,6 +75,21 @@ static const uint8_t D10 = 10;
#define AREF_VOLTAGE (3.0)
#define ADC_MULTIPLIER (3.0F) // 1M, 512k divider bridge
// Power management boot protection threshold (millivolts)
// Set to 0 to disable boot protection
#define PWRMGT_VOLTAGE_BOOTLOCK 3300 // Won't boot below this voltage
// LPCOMP wake configuration (voltage recovery from SYSTEMOFF)
#define PWRMGT_LPCOMP_AIN 7 // AIN7 = P0.31 = PIN_VBAT
// IMPORTANT: The XIAO exposes battery via a resistor divider (ADC_MULTIPLIER = 3.0).
// LPCOMP measures the divided voltage, not the battery voltage directly.
// Vpin = VDD * (REFSEL fraction), and VBAT ≈ Vpin * ADC_MULTIPLIER.
//
// Using 3/8 VDD gives a wake threshold above the boot protection point:
// - If VDD ≈ 3.0V: VBAT ≈ (3.0 * 3/8) * 3 ≈ 3375mV
// - If VDD ≈ 3.3V: VBAT ≈ (3.3 * 3/8) * 3 ≈ 3712mV
#define PWRMGT_LPCOMP_REFSEL 2 // 3/8 VDD (~3.38-3.71V)
static const uint8_t A0 = PIN_A0;
static const uint8_t A1 = PIN_A1;
static const uint8_t A2 = PIN_A2;