diff --git a/.devcontainer/devcontainer.json b/.devcontainer/devcontainer.json
index fcde5048..8440247e 100644
--- a/.devcontainer/devcontainer.json
+++ b/.devcontainer/devcontainer.json
@@ -10,11 +10,12 @@
 	},
 	"runArgs": [
 		"--privileged",
-		// arch tty* is owned by uucp (986)
-		// debian tty* is owned by uucp (20) - no change needed
-		"--group-add=986",
 		"--network=host",
-		"--volume=/dev/bus/usb:/dev/bus/usb:ro"
+		"--volume=/dev/bus/usb:/dev/bus/usb:ro",
+		// arch tty* is owned by uucp (986)
+		// debian tty* is owned by dialout (20)
+		"--group-add=20",
+		"--group-add=986"
 	],
 	"postCreateCommand": {
 		"platformio": "pipx install platformio"
diff --git a/boards/meshtiny.json b/boards/meshtiny.json
new file mode 100644
index 00000000..0418dc3b
--- /dev/null
+++ b/boards/meshtiny.json
@@ -0,0 +1,74 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52840_FEATHER -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      [
+        "0x239A",
+        "0x8029"
+      ],
+      [
+        "0x239A",
+        "0x0029"
+      ],
+      [
+        "0x239A",
+        "0x002A"
+      ],
+      [
+        "0x239A",
+        "0x802A"
+      ]
+    ],
+    "usb_product": "Meshtiny",
+    "mcu": "nrf52840",
+    "variant": "meshtiny",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": [
+    "bluetooth"
+  ],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": [
+    "arduino",
+    "freertos"
+  ],
+  "name": "Meshtiny",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": [
+      "jlink",
+      "nrfjprog",
+      "nrfutil",
+      "stlink"
+    ],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://shop.mtoolstec.com/product/meshtiny",
+  "vendor": "MTools Tec"
+}
diff --git a/boards/rak3401.json b/boards/rak3401.json
new file mode 100644
index 00000000..a2816a63
--- /dev/null
+++ b/boards/rak3401.json
@@ -0,0 +1,72 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52840_FEATHER -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      [
+        "0x239A",
+        "0x8029"
+      ],
+      [
+        "0x239A",
+        "0x0029"
+      ],
+      [
+        "0x239A",
+        "0x002A"
+      ],
+      [
+        "0x239A",
+        "0x802A"
+      ]
+    ],
+    "usb_product": "WisCore RAK3401 Board",
+    "mcu": "nrf52840",
+    "variant": "WisCore_RAK3401_Board",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": [
+    "bluetooth"
+  ],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "svd_path": "nrf52840.svd"
+  },
+  "frameworks": [
+    "arduino"
+  ],
+  "name": "WisCore RAK3401 Board",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": [
+      "jlink",
+      "nrfjprog",
+      "nrfutil",
+      "stlink"
+    ],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://www.rakwireless.com",
+  "vendor": "RAKwireless"
+}
diff --git a/docs/cli_commands.md b/docs/cli_commands.md
new file mode 100644
index 00000000..6b4f6157
--- /dev/null
+++ b/docs/cli_commands.md
@@ -0,0 +1,881 @@
+# MeshCore Repeater & Room Server CLI Commands
+
+## Navigation
+
+- [Operational](#operational)
+- [Neighbors](#neighbors-repeater-only)
+- [Statistics](#statistics)
+- [Logging](#logging)
+- [Information](#info)
+- [Configuration](#configuration)
+  - [Radio](#radio)
+  - [System](#system)
+  - [Routing](#routing)
+  - [ACL](#acl)
+  - [Region Management](#region-management-v110)
+    - [Region Examples](#region-examples)
+  - [GPS](#gps-when-gps-support-is-compiled-in)
+  - [Sensors](#sensors-when-sensor-support-is-compiled-in)
+  - [Bridge](#bridge-when-bridge-support-is-compiled-in)
+
+---
+
+## Operational
+
+### Reboot the node
+**Usage:** 
+- `reboot`
+
+---
+
+### Reset the clock and reboot
+**Usage:**
+- `clkreboot`
+
+---
+
+### Sync the clock with the remote device
+**Usage:** 
+- `clock sync`
+
+---
+
+### Display current time in UTC
+**Usage:**
+- `clock`
+
+---
+
+### Set the time to a specific timestamp
+**Usage:** 
+- `time <epoch_seconds>`
+
+**Parameters:**
+- `epoc_seconds`: Unix epoc time
+
+---
+
+### Send a flood advert
+**Usage:** 
+- `advert`
+
+---
+
+### Start an Over-The-Air (OTA) firmware update
+**Usage:**
+- `start ota`
+
+---
+
+### Erase/Factory Reset
+**Usage:**
+- `erase`
+
+**Serial Only:** Yes
+
+**Warning:** _**This is destructive!**_
+
+---
+
+## Neighbors (Repeater Only)
+
+### List nearby neighbors
+**Usage:** 
+- `neighbors`
+
+**Note:** The output of this command is limited to the 8 most recent adverts.
+
+**Note:** Each line is encoded as `{pubkey-prefix}:{timestamp}:{snr*4}`
+
+---
+
+### Remove a neighbor
+**Usage:** 
+- `neighbor.remove <pubkey_prefix>`
+
+**Parameters:** 
+- `pubkey_prefix`: The public key of the node to remove from the neighbors list
+
+---
+
+## Statistics
+
+### Clear Stats
+**Usage:** `clear stats`
+
+---
+
+### System Stats - Battery, Uptime, Queue Length and Debug Flags
+**Usage:** 
+- `stats-core`
+
+**Serial Only:** Yes
+
+---
+
+### Radio Stats - Noise floor, Last RSSI/SNR, Airtime, Receive errors
+**Usage:** `stats-radio`
+
+**Serial Only:** Yes
+
+---
+
+### Packet stats - Packet counters: Received, Sent
+**Usage:** `stats-packets`
+
+**Serial Only:** Yes
+
+---
+
+## Logging
+
+### Begin capture of rx log to node storage
+**Usage:** `log start`
+
+---
+
+### End capture of rx log to node sotrage
+**Usage:** `log stop`
+
+---
+
+### Erase captured log
+**Usage:** `log erase`
+
+---
+
+### Print the captured log to the serial terminal
+**Usage:** `log`
+
+**Serial Only:** Yes
+
+---
+
+## Info
+
+### Get the Version
+**Usage:** `ver`
+
+---
+
+### Show the hardware name
+**Usage:** `board`
+
+---
+
+## Configuration
+
+### Radio
+
+#### View or change this node's radio parameters
+**Usage:**
+- `get radio`
+- `set radio <freq>,<bw>,<sf>,<cr>`
+
+**Parameters:**
+- `freq`: Frequency in MHz
+- `bw`: Bandwidth in kHz
+- `sf`: Spreading factor (5-12)
+- `cr`: Coding rate (5-8)
+
+**Set by build flag:** `LORA_FREQ`, `LORA_BW`, `LORA_SF`, `LORA_CR`
+
+**Default:** `869.525,250,11,5`
+
+**Note:** Requires reboot to apply
+
+---
+
+#### View or change this node's transmit power
+**Usage:**
+- `get tx`
+- `set tx <dbm>`
+
+**Parameters:**
+- `dbm`: Power level in dBm (1-22)
+
+**Set by build flag:** `LORA_TX_POWER`
+
+**Default:** Varies by board
+
+**Notes:** This setting only controls the power level of the LoRa chip. Some nodes have an additional power amplifier stage which increases the total output. Referr to the node's manual for the correct setting to use. **Setting a value too high may violate the laws in your country.**
+
+---
+
+#### Change the radio parameters for a set duration
+**Usage:** 
+- `tempradio <freq>,<bw>,<sf>,<cr>,<timeout_mins>`
+
+**Parameters:**
+- `freq`: Frequency in MHz (300-2500)
+- `bw`: Bandwidth in kHz (7.8-500)
+- `sf`: Spreading factor (5-12)
+- `cr`: Coding rate (5-8)
+- `timeout_mins`: Duration in minutes (must be > 0)
+
+**Note:** This is not saved to preferences and will clear on reboot
+
+---
+
+#### View or change this node's frequency
+**Usage:**
+- `get freq`
+- `set freq <frequency>`
+
+**Parameters:**
+- `frequency`: Frequency in MHz
+
+**Default:** `869.525`
+
+**Note:** Requires reboot to apply
+
+### System
+
+#### View or change this node's name
+**Usage:**
+- `get name`
+- `set name <name>`
+
+**Parameters:**
+- `name`: Node name
+
+**Set by build flag:** `ADVERT_NAME`
+
+**Default:** Varies by board
+
+**Note:** Max length varies. If a location is set, the max length is 24 bytes; 32 otherwise. Emoji and unicode characters may take more than one byte.
+
+---
+
+#### View or change this node's latitude
+**Usage:**
+- `get lat`
+- `set lat <degrees>`
+
+**Set by build flag:** `ADVERT_LAT`
+
+**Default:** `0`
+
+**Parameters:**
+- `degrees`: Latitude in degrees
+
+---
+
+#### View or change this node's longitude
+**Usage:**
+- `get lon`
+- `set lon <degrees>`
+
+**Set by build flag:** `ADVERT_LON`
+
+**Default:** `0`
+
+**Parameters:**
+- `degrees`: Longitude in degrees
+
+---
+
+#### View or change this node's identity (Private Key)
+**Usage:**
+- `get prv.key`
+- `set prv.key <private_key>`
+
+**Parameters:**
+- `private_key`: Private key in hex format (64 hex characters)
+
+**Serial Only:**
+- `get prv.key`: Yes
+- `set prv.key`: No
+
+**Note:** Requires reboot to take effect after setting
+
+---
+
+#### View or change this node's admin password
+**Usage:**
+- `get password`
+- `set password <password>`
+
+**Parameters:**
+- `password`: Admin password
+
+**Set by build flag:** `ADMIN_PASSWORD`
+
+**Default:** `password`
+
+**Note:** Echoed back for confirmation
+
+**Note:** Any node using this password will be added to the admin ACL list.
+
+---
+
+#### View or change this node's guest password
+**Usage:**
+- `get guest.password`
+- `set guest.password <password>`
+
+**Parameters:**
+- `password`: Guest password
+
+**Set by build flag:** `ROOM_PASSWORD` (Room Server only)
+
+**Default:** `<blank>`
+
+---
+
+#### View or change this node's owner info
+**Usage:**
+- `get owner.info`
+- `set owner.info <text>`
+
+**Parameters:**
+- `text`: Owner information text
+
+**Default:** `<blank>`
+
+**Note:** `|` characters are translated to newlines
+
+**Note:** Requires firmware 1.12.+
+
+---
+
+#### Fine-tune the battery reading
+**Usage:**
+- `get adc.multiplier`
+- `set adc.multiplier <value>`
+
+**Parameters:**
+- `value`: ADC multiplier (0.0-10.0)
+
+**Default:** `0.0` (value defined by board)
+
+**Note:** Returns "Error: unsupported by this board" if hardware doesn't support it
+
+---
+
+#### View or change this node's power saving flag (Repeater Only)
+**Usage:**
+- `powersaving <state>`
+- `powersaving`
+
+**Parameters:** 
+- `state`: `on`|`off` 
+
+**Default:** `on`
+
+**Note:** When enabled, device enters sleep mode between radio transmissions
+
+---
+
+### Routing
+
+#### View or change this node's repeat flag
+**Usage:**
+- `get repeat`
+- `set repeat <state>`
+
+**Parameters:**
+  - `state`: `on`|`off`
+
+**Default:** `on`
+
+---
+
+#### View or change the retransmit delay factor for flood traffic
+**Usage:**
+- `get txdelay`
+- `set txdelay <value>`
+
+**Parameters:**
+- `value`: Transmit delay factor (0-2)
+
+**Default:** `0.5`
+
+---
+
+#### View or change the retransmit delay factor for direct traffic
+**Usage:**
+- `get direct.txdelay`
+- `set direct.txdelay <value>`
+
+**Parameters:**
+- `value`: Direct transmit delay factor (0-2)
+
+**Default:** `0.2`
+
+---
+
+#### [Experimental] View or change the processing delay for received traffic
+**Usage:**
+- `get rxdelay`
+- `set rxdelay <value>`
+
+**Parameters:**
+- `value`: Receive delay base (0-20)
+
+**Default:** `0.0`
+
+---
+
+#### View or change the airtime factor (duty cycle limit)
+**Usage:**
+- `get af`
+- `set af <value>`
+
+**Parameters:**
+- `value`: Airtime factor (0-9)
+
+**Default:** `1.0`
+
+---
+
+#### View or change the local interference threshold
+**Usage:**
+- `get int.thresh`
+- `set int.thresh <value>`
+
+**Parameters:**
+- `value`: Interference threshold value
+
+**Default:** `0.0`
+
+---
+
+#### View or change the AGC Reset Interval
+**Usage:**
+- `get agc.reset.interval`
+- `set agc.reset.interval <value>`
+
+**Parameters:**
+- `value`: Interval in seconds rounded down to a multiple of 4 (17 becomes 16)
+
+**Default:** `0.0`
+
+---
+
+#### Enable or disable Multi-Acks support
+**Usage:**
+- `get multi.acks`
+- `set multi.acks <state>`
+
+**Parameters:**
+- `state`: `0` (disable) or `1` (enable)
+
+**Default:** `0`
+
+---
+
+#### View or change the flood advert interval
+**Usage:**
+- `get flood.advert.interval`
+- `set flood.advert.interval <hours>`
+
+**Parameters:**
+- `hours`: Interval in hours (3-168)
+
+**Default:** `12` (Repeater) - `0` (Sensor)
+
+---
+
+#### View or change the zero-hop advert interval
+**Usage:**
+- `get advert.interval`
+- `set advert.interval <minutes>`
+
+**Parameters:**
+- `minutes`: Interval in minutes rounded down to the nearest multiple of 2 (61 becomes 60) (60-240)
+
+**Default:** `0`
+
+---
+
+#### Limit the number of hops for a flood message
+**Usage:**
+- `get flood.max`
+- `set flood.max <value>`
+
+**Parameters:**
+- `value`: Maximum flood hop count (0-64)
+
+**Default:** `64`
+
+---
+
+### ACL
+
+#### Add, update or remove permissions for a companion
+**Usage:** 
+- `setperm <pubkey> <permissions>`
+
+**Parameters:**
+- `pubkey`: Companion public key
+- `permissions`: 
+  - `0`: Guest
+  - `1`: Read-only
+  - `2`: Read-write
+  - `3`: Admin
+
+**Note:** Removes the entry when `permissions` is omitted
+
+---
+
+#### View the current ACL
+**Usage:** 
+- `get acl`
+
+**Serial Only:** Yes
+
+---
+
+#### View or change this room server's 'read-only' flag
+**Usage:**
+- `get allow.read.only`
+- `set allow.read.only <state>`
+
+**Parameters:**
+- `state`: `on` (enable) or `off` (disable)
+
+**Default:** `off`
+
+---
+
+### Region Management (v1.10.+)
+
+#### Bulk-load region lists
+**Usage:** 
+- `region load`
+- `region load <name> [flood_flag]`
+
+**Parameters:**
+- `name`: A name of a region. `*` represents the wildcard region
+
+**Note:** `flood_flag`: Optional `F` to allow flooding
+
+**Note:** Indentation creates parent-child relationships (max 8 levels)
+
+**Note:** `region load` with an empty name will not work remotely (it's interactive)
+
+---
+
+#### Save any changes to regions made since reboot
+**Usage:** 
+- `region save`
+
+---
+
+#### Allow a region
+**Usage:** 
+- `region allowf <name>`
+
+**Parameters:** 
+- `name`: Region name (or `*` for wildcard)
+
+**Note:** Setting on wildcard `*` allows packets without region transport codes
+
+---
+
+#### Block a region
+**Usage:** 
+- `region denyf <name>`
+
+**Parameters:** 
+- `name`: Region name (or `*` for wildcard)
+
+**Note:** Setting on wildcard `*` drops packets without region transport codes
+
+---
+
+#### Show information for a region
+**Usage:** 
+- `region get <name>`
+
+**Parameters:**
+- `name`: Region name (or `*` for wildcard)
+
+---
+
+#### View or change the home region for this node
+**Usage:** 
+- `region home`
+- `region home <name>`
+
+**Parameters:**
+- `name`: Region name
+
+---
+
+#### Create a new region
+**Usage:** 
+- `region put <name> [parent_name]`
+
+**Parameters:**
+- `name`: Region name
+- `parent_name`: Parent region name (optional, defaults to wildcard)
+
+---
+
+#### Remove a region
+**Usage:** 
+- `region remove <name>`
+
+**Parameters:**
+- `name`: Region name
+
+**Note:** Must remove all child regions before the region can be removed 
+
+---
+
+#### View all regions
+**Usage:** 
+- `region list <filter>`
+
+**Serial Only:** Yes
+
+**Parameters:**
+- `filter`: `allowed`|`denied`
+
+**Note:** Requires firmware 1.12.+
+
+---
+
+#### Dump all defined regions and flood permissions
+**Usage:** 
+- `region`
+
+**Serial Only:** Yes
+
+---
+
+### Region Examples
+
+**Example 1: Using F Flag with Named Public Region**
+```
+region load
+#Europe F
+<blank line to end region load>
+region save
+```
+
+**Explanation:**
+- Creates a region named `#Europe` with flooding enabled
+- Packets from this region will be flooded to other nodes
+
+---
+
+**Example 2: Using Wildcard with F Flag**
+```
+region load 
+* F
+<blank line to end region load>
+region save
+```
+
+**Explanation:**
+- Creates a wildcard region `*` with flooding enabled
+- Enables flooding for all regions automatically
+- Applies only to packets without transport codes
+
+---
+
+**Example 3: Using Wildcard Without F Flag**
+```
+region load 
+*
+<blank line to end region load>
+region save
+```
+**Explanation:**
+- Creates a wildcard region `*` without flooding
+- This region exists but doesn't affect packet distribution
+- Used as a default/empty region
+
+---
+
+**Example 4: Nested Public Region with F Flag**
+```
+region load 
+#Europe F
+  #UK
+    #London
+    #Manchester
+  #France
+    #Paris
+    #Lyon
+<blank line to end region load>
+region save
+```
+
+**Explanation:**
+- Creates `#Europe` region with flooding enabled
+- Adds nested child regions (`#UK`, `#France`)
+- All nested regions inherit the flooding flag from parent
+
+---
+
+**Example 5: Wildcard with Nested Public Regions**
+```
+region load 
+* F
+  #NorthAmerica
+    #USA
+      #NewYork
+      #California
+    #Canada
+      #Ontario
+      #Quebec
+<blank line to end region load>
+region save
+```
+
+**Explanation:**
+- Creates wildcard region `*` with flooding enabled
+- Adds nested `#NorthAmerica` hierarchy
+- Enables flooding for all child regions automatically
+- Useful for global networks with specific regional rules
+
+---
+### GPS (When GPS support is compiled in)
+
+#### View or change GPS state
+**Usage:**
+- `gps`
+- `gps <state>`
+
+**Parameters:**
+- `state`: `on`|`off`
+
+**Default:** `off`
+
+**Note:** Output format: `{status}, {fix}, {sat count}` (when enabled)
+
+---
+
+#### Sync this node's clock with GPS time
+**Usage:** 
+- `gps sync`
+
+---
+
+#### Set this node's location based on the GPS coordinates
+**Usage:** 
+- `gps setloc`
+
+---
+
+#### View or change the GPS advert policy
+**Usage:**
+- `gps advert`
+- `gps advert <policy>`
+
+**Parameters:** 
+- `policy`: `none`|`shared`|`prefs` 
+  - `none`: don't include location in adverts
+  - `share`: share gps location (from SensorManager)
+  - `prefs`: location stored in node's lat and lon settings
+
+**Default:** `prefs`
+
+---
+
+### Sensors (When sensor support is compiled in)
+
+#### View the list of sensors on this node
+**Usage:** `sensor list [start]`
+
+**Parameters:**
+- `start`: Optional starting index (defaults to 0)
+
+**Note:** Output format: `<var_name>=<value>\n`
+
+---
+
+#### View or change thevalue of a sensor
+**Usage:** 
+- `sensor get <key>`
+- `sensor set <key> <value>`
+
+**Parameters:**
+- `key`: Sensor setting name
+- `value`: The value to set the sensor to
+
+---
+
+### Bridge (When bridge support is compiled in)
+
+#### View or change the bridge enabled flag
+**Usage:**
+- `get bridge.enabled`
+- `set bridge.enabled <state>`
+
+**Parameters:**
+- `state`: `on`|`off`
+
+**Default:** `off`
+
+---
+
+#### View the bridge source
+**Usage:**
+- `get bridge.source`
+
+---
+
+#### Add a delay to packets routed through this bridge
+**Usage:**
+- `get bridge.delay`
+- `set bridge.delay <ms>`
+
+**Parameters:**
+- `ms`: Delay in milliseconds (0-10000)
+
+**Default:** `500`
+
+---
+
+#### View or change the source of packets bridged to the external interface
+**Usage:**
+- `get bridge.source`
+- `set bridge.source <source>`
+
+**Parameters:**
+- `source`: 
+  - `rx`: bridges received packets
+  - `tx`: bridges transmitted packets
+
+**Default:** `tx`
+
+---
+
+#### View or change the speed of the bridge (RS-232 only)
+**Usage:**
+- `get bridge.baud`
+- `set bridge.baud <rate>`
+
+**Parameters:**
+- `rate`: Baud rate (`9600`, `19200`, `38400`, `57600`, or `115200`)
+
+**Default:** `115200`
+
+---
+
+#### View or change the channel used for bridging (ESPNow only)
+**Usage:**
+- `get bridge.channel`
+- `set bridge.channel <channel>`
+
+**Parameters:**
+- `channel`: Channel number (1-14)
+
+---
+
+#### Set the ESP-Now secret
+**Usage:** 
+- `get bridge.secret`
+- `set bridge.secret <secret>`
+
+**Parameters:**
+- `secret`: 16-character encryption secret
+
+**Default:** Varies by board
+
+---
diff --git a/docs/nrf52_power_management.md b/docs/nrf52_power_management.md
new file mode 100644
index 00000000..ebe9bbbe
--- /dev/null
+++ b/docs/nrf52_power_management.md
@@ -0,0 +1,213 @@
+# nRF52 Power Management
+
+## Overview
+
+The nRF52 Power Management module provides battery protection features to prevent over-discharge, minimise likelihood of brownout and flash corruption conditions existing, and enable safe voltage-based recovery.
+
+## Features
+
+### Boot Voltage Protection
+- Checks battery voltage immediately after boot and before mesh operations commence
+- If voltage is below a configurable threshold (e.g., 3300mV), the device configures voltage wake (LPCOMP + VBUS) and enters protective shutdown (SYSTEMOFF)
+- Prevents boot loops when battery is critically low
+- Skipped when external power (USB VBUS) is detected
+
+### Voltage Wake (LPCOMP + VBUS)
+- Configures the nRF52's Low Power Comparator (LPCOMP) before entering SYSTEMOFF
+- Enables USB VBUS detection so external power can wake the device
+- Device automatically wakes when battery voltage rises above recovery threshold or when VBUS is detected
+
+### Early Boot Register Capture
+- Captures RESETREAS (reset reason) and GPREGRET2 (shutdown reason) before SystemInit() clears them
+- Allows firmware to determine why it booted (cold boot, watchdog, LPCOMP wake, etc.)
+- Allows firmware to determine why it last shut down (user request, low voltage, boot protection)
+
+### Shutdown Reason Tracking
+Shutdown reason codes (stored in GPREGRET2):
+| Code | Name | Description |
+|------|------|-------------|
+| 0x00 | NONE | Normal boot / no previous shutdown |
+| 0x4C | LOW_VOLTAGE | Runtime low voltage threshold reached |
+| 0x55 | USER | User requested powerOff() |
+| 0x42 | BOOT_PROTECT | Boot voltage protection triggered |
+
+## Supported Boards
+
+| Board | Implemented | LPCOMP wake | VBUS wake |
+|-------|-------------|-------------|-----------|
+| Seeed Studio XIAO nRF52840 (`xiao_nrf52`) | Yes | Yes | Yes |
+| RAK4631 (`rak4631`) | Yes | Yes | Yes |
+| Heltec T114 (`heltec_t114`) | Yes | Yes | Yes |
+| Promicro nRF52840 | No | No | No |
+| RAK WisMesh Tag | No | No | No |
+| Heltec Mesh Solar | No | No | No |
+| LilyGo T-Echo / T-Echo Lite | No | No | No |
+| SenseCAP Solar | No | No | No |
+| WIO Tracker L1 / L1 E-Ink | No | No | No |
+| WIO WM1110 | No | No | No |
+| Mesh Pocket | No | No | No |
+| Nano G2 Ultra | No | No | No |
+| ThinkNode M1/M3/M6 | No | No | No |
+| T1000-E | No | No | No |
+| Ikoka Nano/Stick/Handheld (nRF) | No | No | No |
+| Keepteen LT1 | No | No | No |
+| Minewsemi ME25LS01 | No | No | No |
+
+Notes:
+- "Implemented" reflects Phase 1 (boot lockout + shutdown reason capture).
+- User power-off on Heltec T114 does not enable LPCOMP wake.
+- VBUS detection is used to skip boot lockout on external power, and VBUS wake is configured alongside LPCOMP when supported hardware exposes VBUS to the nRF52.
+
+## Technical Details
+
+### Architecture
+
+The power management functionality is integrated into the `NRF52Board` base class in `src/helpers/NRF52Board.cpp`. Board variants provide hardware-specific configuration via a `PowerMgtConfig` struct and override `initiateShutdown(uint8_t reason)` to perform board-specific power-down work and conditionally enable voltage wake (LPCOMP + VBUS).
+
+### Early Boot Capture
+
+A static constructor with priority 101 in `NRF52Board.cpp` captures the RESETREAS and GPREGRET2 registers before:
+- SystemInit() (priority 102) - which clears RESETREAS
+- Static C++ constructors (default priority 65535)
+
+This ensures we capture the true reset reason before any initialisation code runs.
+
+### Board Implementation
+
+To enable power management on a board variant:
+
+1. **Enable in platformio.ini**:
+   ```ini
+   -D NRF52_POWER_MANAGEMENT
+   ```
+
+2. **Define configuration in variant.h**:
+   ```c
+   #define PWRMGT_VOLTAGE_BOOTLOCK    3300   // Won't boot below this voltage (mV)
+   #define PWRMGT_LPCOMP_AIN          7      // AIN channel for voltage sensing
+   #define PWRMGT_LPCOMP_REFSEL       2      // REFSEL (0-6=1/8..7/8, 7=ARef, 8-15=1/16..15/16)
+   ```
+
+3. **Implement in board .cpp file**:
+   ```cpp
+   #ifdef NRF52_POWER_MANAGEMENT
+   const PowerMgtConfig power_config = {
+     .lpcomp_ain_channel = PWRMGT_LPCOMP_AIN,
+     .lpcomp_refsel = PWRMGT_LPCOMP_REFSEL,
+     .voltage_bootlock = PWRMGT_VOLTAGE_BOOTLOCK
+   };
+
+   void MyBoard::initiateShutdown(uint8_t reason) {
+     // Board-specific shutdown preparation (e.g., disable peripherals)
+     bool enable_lpcomp = (reason == SHUTDOWN_REASON_LOW_VOLTAGE ||
+                           reason == SHUTDOWN_REASON_BOOT_PROTECT);
+
+     if (enable_lpcomp) {
+       configureVoltageWake(power_config.lpcomp_ain_channel, power_config.lpcomp_refsel);
+     }
+
+     enterSystemOff(reason);
+   }
+   #endif
+
+   void MyBoard::begin() {
+     NRF52Board::begin();  // or NRF52BoardDCDC::begin()
+     // ... board setup ...
+
+   #ifdef NRF52_POWER_MANAGEMENT
+     checkBootVoltage(&power_config);
+   #endif
+   }
+   ```
+
+   For user-initiated shutdowns, `powerOff()` remains board-specific. Power management only arms LPCOMP for automated shutdown reasons (boot protection/low voltage).
+
+4. **Declare override in board .h file**:
+   ```cpp
+   #ifdef NRF52_POWER_MANAGEMENT
+     void initiateShutdown(uint8_t reason) override;
+   #endif
+   ```
+
+### Voltage Wake Configuration
+
+The LPCOMP (Low Power Comparator) is configured to:
+- Monitor the specified AIN channel (0-7 corresponding to P0.02-P0.05, P0.28-P0.31)
+- Compare against VDD fraction reference (REFSEL: 0-6=1/8..7/8, 7=ARef, 8-15=1/16..15/16)
+- Detect UP events (voltage rising above threshold)
+- Use 50mV hysteresis for noise immunity
+- Wake the device from SYSTEMOFF when triggered
+
+VBUS wake is enabled via the POWER peripheral USBDETECTED event whenever `configureVoltageWake()` is used. This requires USB VBUS to be routed to the nRF52 (typical on nRF52840 boards with native USB).
+
+**LPCOMP Reference Selection (PWRMGT_LPCOMP_REFSEL)**:
+| REFSEL | Fraction | VBAT @ 1M/1M divider (VDD=3.0-3.3) | VBAT @ 1.5M/1M divider (VDD=3.0-3.3) |
+|--------|----------|------------------------------------|--------------------------------------|
+| 0 | 1/8 | 0.75-0.82 V | 0.94-1.03 V |
+| 1 | 2/8 | 1.50-1.65 V | 1.88-2.06 V |
+| 2 | 3/8 | 2.25-2.47 V | 2.81-3.09 V |
+| 3 | 4/8 | 3.00-3.30 V | 3.75-4.12 V |
+| 4 | 5/8 | 3.75-4.12 V | 4.69-5.16 V |
+| 5 | 6/8 | 4.50-4.95 V | 5.62-6.19 V |
+| 6 | 7/8 | 5.25-5.77 V | 6.56-7.22 V |
+| 7 | ARef | - | - |
+| 8 | 1/16 | 0.38-0.41 V | 0.47-0.52 V |
+| 9 | 3/16 | 1.12-1.24 V | 1.41-1.55 V |
+| 10 | 5/16 | 1.88-2.06 V | 2.34-2.58 V |
+| 11 | 7/16 | 2.62-2.89 V | 3.28-3.61 V |
+| 12 | 9/16 | 3.38-3.71 V | 4.22-4.64 V |
+| 13 | 11/16 | 4.12-4.54 V | 5.16-5.67 V |
+| 14 | 13/16 | 4.88-5.36 V | 6.09-6.70 V |
+| 15 | 15/16 | 5.62-6.19 V | 7.03-7.73 V |
+
+**Important**: For boards with a voltage divider on the battery sense pin, LPCOMP measures the divided voltage. Use:
+`VBAT_threshold ≈ (VDD * fraction) * divider_scale`, where `divider_scale = (Rtop + Rbottom) / Rbottom` (e.g., 2.0 for 1M/1M, 2.5 for 1.5M/1M, 3.0 for XIAO).
+
+### SoftDevice Compatibility
+
+The power management code checks whether SoftDevice is enabled and uses the appropriate API:
+- When SD enabled: `sd_power_*` functions
+- When SD disabled: Direct register access (NRF_POWER->*)
+
+This ensures compatibility regardless of BLE stack state.
+
+## CLI Commands
+
+Power management status can be queried via the CLI:
+
+| Command | Description |
+|---------|-------------|
+| `get pwrmgt.support` | Returns "supported" or "unsupported" |
+| `get pwrmgt.source` | Returns current power source - "battery" or "external" (5V/USB power) |
+| `get pwrmgt.bootreason` | Returns reset and shutdown reason strings |
+| `get pwrmgt.bootmv` | Returns boot voltage in millivolts |
+
+On boards without power management enabled, all commands except `get pwrmgt.support` return:
+```
+ERROR: Power management not supported
+```
+
+## Debug Output
+
+When `MESH_DEBUG=1` is enabled, the power management module outputs:
+```
+DEBUG: PWRMGT: Reset = Wake from LPCOMP (0x20000); Shutdown = Low Voltage (0x4C)
+DEBUG: PWRMGT: Boot voltage = 3450 mV (threshold = 3300 mV)
+DEBUG: PWRMGT: LPCOMP wake configured (AIN7, ref=3/8 VDD)
+```
+
+## Phase 2 (Planned)
+
+- Runtime voltage monitoring
+- Voltage state machine (Normal -> Warning -> Critical -> Shutdown)
+- Configurable thresholds
+- Load shedding callbacks for power reduction
+- Deep sleep integration
+- Scheduled wake-up
+- Extended sleep with periodic monitoring
+
+## References
+
+- [nRF52840 Product Specification - POWER](https://infocenter.nordicsemi.com/topic/ps_nrf52840/power.html)
+- [nRF52840 Product Specification - LPCOMP](https://infocenter.nordicsemi.com/topic/ps_nrf52840/lpcomp.html)
+- [SoftDevice S140 API - Power Management](https://infocenter.nordicsemi.com/topic/sdk_nrf5_v17.1.0/group__nrf__sdm__api.html)
diff --git a/examples/companion_radio/DataStore.cpp b/examples/companion_radio/DataStore.cpp
index 4faac975..f61f53ae 100644
--- a/examples/companion_radio/DataStore.cpp
+++ b/examples/companion_radio/DataStore.cpp
@@ -227,6 +227,7 @@ void DataStore::loadPrefsInt(const char *filename, NodePrefs& _prefs, double& no
     file.read((uint8_t *)&_prefs.buzzer_quiet, sizeof(_prefs.buzzer_quiet));               // 84
     file.read((uint8_t *)&_prefs.gps_enabled, sizeof(_prefs.gps_enabled));                 // 85
     file.read((uint8_t *)&_prefs.gps_interval, sizeof(_prefs.gps_interval));               // 86
+    file.read((uint8_t *)&_prefs.autoadd_config, sizeof(_prefs.autoadd_config));           // 87
 
     file.close();
   }
@@ -261,6 +262,7 @@ void DataStore::savePrefs(const NodePrefs& _prefs, double node_lat, double node_
     file.write((uint8_t *)&_prefs.buzzer_quiet, sizeof(_prefs.buzzer_quiet));               // 84
     file.write((uint8_t *)&_prefs.gps_enabled, sizeof(_prefs.gps_enabled));                 // 85
     file.write((uint8_t *)&_prefs.gps_interval, sizeof(_prefs.gps_interval));               // 86
+    file.write((uint8_t *)&_prefs.autoadd_config, sizeof(_prefs.autoadd_config));           // 87
 
     file.close();
   }
diff --git a/examples/companion_radio/MyMesh.cpp b/examples/companion_radio/MyMesh.cpp
index 59a0078f..2dad7866 100644
--- a/examples/companion_radio/MyMesh.cpp
+++ b/examples/companion_radio/MyMesh.cpp
@@ -54,6 +54,8 @@
 #define CMD_SEND_CONTROL_DATA         55   // v8+
 #define CMD_GET_STATS                 56   // v8+, second byte is stats type
 #define CMD_SEND_ANON_REQ             57
+#define CMD_SET_AUTOADD_CONFIG        58
+#define CMD_GET_AUTOADD_CONFIG        59
 
 // Stats sub-types for CMD_GET_STATS
 #define STATS_TYPE_CORE               0
@@ -85,6 +87,7 @@
 #define RESP_CODE_ADVERT_PATH         22
 #define RESP_CODE_TUNING_PARAMS       23
 #define RESP_CODE_STATS               24   // v8+, second byte is stats type
+#define RESP_CODE_AUTOADD_CONFIG      25
 
 #define SEND_TIMEOUT_BASE_MILLIS        500
 #define FLOOD_SEND_TIMEOUT_FACTOR       16.0f
@@ -110,6 +113,8 @@
 #define PUSH_CODE_BINARY_RESPONSE       0x8C
 #define PUSH_CODE_PATH_DISCOVERY_RESPONSE 0x8D
 #define PUSH_CODE_CONTROL_DATA          0x8E   // v8+
+#define PUSH_CODE_CONTACT_DELETED       0x8F // used to notify client app of deleted contact when overwriting oldest
+#define PUSH_CODE_CONTACTS_FULL         0x90 // used to notify client app that contacts storage is full
 
 #define ERR_CODE_UNSUPPORTED_CMD        1
 #define ERR_CODE_NOT_FOUND              2
@@ -120,6 +125,15 @@
 
 #define MAX_SIGN_DATA_LEN               (8 * 1024) // 8K
 
+// Auto-add config bitmask
+// Bit 0: If set, overwrite oldest non-favourite contact when contacts file is full
+// Bits 1-4: these indicate which contact types to auto-add when manual_contact_mode = 0x01
+#define AUTO_ADD_OVERWRITE_OLDEST (1 << 0)  // 0x01 - overwrite oldest non-favourite when full
+#define AUTO_ADD_CHAT             (1 << 1)  // 0x02 - auto-add Chat (Companion) (ADV_TYPE_CHAT)
+#define AUTO_ADD_REPEATER         (1 << 2)  // 0x04 - auto-add Repeater (ADV_TYPE_REPEATER)
+#define AUTO_ADD_ROOM_SERVER      (1 << 3)  // 0x08 - auto-add Room Server (ADV_TYPE_ROOM)
+#define AUTO_ADD_SENSOR           (1 << 4)  // 0x10 - auto-add Sensor (ADV_TYPE_SENSOR)
+
 void MyMesh::writeOKFrame() {
   uint8_t buf[1];
   buf[0] = RESP_CODE_OK;
@@ -262,20 +276,64 @@ bool MyMesh::isAutoAddEnabled() const {
   return (_prefs.manual_add_contacts & 1) == 0;
 }
 
+bool MyMesh::shouldAutoAddContactType(uint8_t contact_type) const {
+  if ((_prefs.manual_add_contacts & 1) == 0) {
+    return true;
+  }
+  
+  uint8_t type_bit = 0;
+  switch (contact_type) {
+    case ADV_TYPE_CHAT:
+      type_bit = AUTO_ADD_CHAT;
+      break;
+    case ADV_TYPE_REPEATER:
+      type_bit = AUTO_ADD_REPEATER;
+      break;
+    case ADV_TYPE_ROOM:
+      type_bit = AUTO_ADD_ROOM_SERVER;
+      break;
+    case ADV_TYPE_SENSOR:
+      type_bit = AUTO_ADD_SENSOR;
+      break;
+    default:
+      return false;  // Unknown type, don't auto-add
+  }
+  
+  return (_prefs.autoadd_config & type_bit) != 0;
+}
+
+bool MyMesh::shouldOverwriteWhenFull() const {
+  return (_prefs.autoadd_config & AUTO_ADD_OVERWRITE_OLDEST) != 0;
+}
+
+void MyMesh::onContactOverwrite(const uint8_t* pub_key) {
+  if (_serial->isConnected()) {
+    out_frame[0] = PUSH_CODE_CONTACT_DELETED;
+    memcpy(&out_frame[1], pub_key, PUB_KEY_SIZE);
+    _serial->writeFrame(out_frame, 1 + PUB_KEY_SIZE);
+  }
+}
+
+void MyMesh::onContactsFull() {
+  if (_serial->isConnected()) {
+    out_frame[0] = PUSH_CODE_CONTACTS_FULL;
+    _serial->writeFrame(out_frame, 1);
+  }
+}
+
 void MyMesh::onDiscoveredContact(ContactInfo &contact, bool is_new, uint8_t path_len, const uint8_t* path) {
   if (_serial->isConnected()) {
-    if (!isAutoAddEnabled() && is_new) {
+    if (is_new) {
       writeContactRespFrame(PUSH_CODE_NEW_ADVERT, contact);
     } else {
       out_frame[0] = PUSH_CODE_ADVERT;
       memcpy(&out_frame[1], contact.id.pub_key, PUB_KEY_SIZE);
       _serial->writeFrame(out_frame, 1 + PUB_KEY_SIZE);
     }
-  } else {
+  } 
 #ifdef DISPLAY_CLASS
-    if (_ui) _ui->notify(UIEventType::newContactMessage);
+  if (_ui && !_prefs.buzzer_quiet) _ui->notify(UIEventType::newContactMessage); //buzz if enabled
 #endif
-  }
 
   // add inbound-path to mem cache
   if (path && path_len <= sizeof(AdvertPath::path)) {  // check path is valid
@@ -299,7 +357,7 @@ void MyMesh::onDiscoveredContact(ContactInfo &contact, bool is_new, uint8_t path
     memcpy(p->path, path, p->path_len);
   }
 
-  dirty_contacts_expiry = futureMillis(LAZY_CONTACTS_WRITE_DELAY);
+  if (!is_new) dirty_contacts_expiry = futureMillis(LAZY_CONTACTS_WRITE_DELAY); // only schedule lazy write for contacts that are in contacts[]
 }
 
 static int sort_by_recent(const void *a, const void *b) {
@@ -382,9 +440,7 @@ void MyMesh::queueMessage(const ContactInfo &from, uint8_t txt_type, mesh::Packe
   bool should_display = txt_type == TXT_TYPE_PLAIN || txt_type == TXT_TYPE_SIGNED_PLAIN;
   if (should_display && _ui) {
     _ui->newMsg(path_len, from.name, text, offline_queue_len);
-    if (!_serial->isConnected()) {
-      _ui->notify(UIEventType::contactMessage);
-    }
+    if (!_prefs.buzzer_quiet) _ui->notify(UIEventType::contactMessage); //buzz if enabled
   }
 #endif
 }
@@ -469,11 +525,8 @@ void MyMesh::onChannelMessageRecv(const mesh::GroupChannel &channel, mesh::Packe
     uint8_t frame[1];
     frame[0] = PUSH_CODE_MSG_WAITING; // send push 'tickle'
     _serial->writeFrame(frame, 1);
-  } else {
-#ifdef DISPLAY_CLASS
-    if (_ui) _ui->notify(UIEventType::channelMessage);
-#endif
   }
+
 #ifdef DISPLAY_CLASS
   // Get the channel name from the channel index
   const char *channel_name = "Unknown";
@@ -481,7 +534,10 @@ void MyMesh::onChannelMessageRecv(const mesh::GroupChannel &channel, mesh::Packe
   if (getChannel(channel_idx, channel_details)) {
     channel_name = channel_details.name;
   }
-  if (_ui) _ui->newMsg(path_len, channel_name, text, offline_queue_len);
+  if (_ui) {
+    _ui->newMsg(path_len, channel_name, text, offline_queue_len);
+    if (!_prefs.buzzer_quiet) _ui->notify(UIEventType::channelMessage); //buzz if enabled
+  }
 #endif
 }
 
@@ -740,6 +796,7 @@ MyMesh::MyMesh(mesh::Radio &radio, mesh::RNG &rng, mesh::RTCClock &rtc, SimpleMe
   _prefs.bw = LORA_BW;
   _prefs.cr = LORA_CR;
   _prefs.tx_power_dbm = LORA_TX_POWER;
+  _prefs.buzzer_quiet = 0;
   _prefs.gps_enabled = 0;       // GPS disabled by default
   _prefs.gps_interval = 0;      // No automatic GPS updates by default
   //_prefs.rx_delay_base = 10.0f;  enable once new algo fixed
@@ -758,14 +815,14 @@ void MyMesh::begin(bool has_display) {
     _store->saveMainIdentity(self_id);
   }
 
+// if name is provided as a build flag, use that as default node name instead
+#ifdef ADVERT_NAME
+  strcpy(_prefs.node_name, ADVERT_NAME);
+#else
   // use hex of first 4 bytes of identity public key as default node name
   char pub_key_hex[10];
   mesh::Utils::toHex(pub_key_hex, self_id.pub_key, 4);
   strcpy(_prefs.node_name, pub_key_hex);
-
-// if name is provided as a build flag, use that as default node name instead
-#ifdef ADVERT_NAME
-  strcpy(_prefs.node_name, ADVERT_NAME);
 #endif
 
   // load persisted prefs
@@ -779,6 +836,7 @@ void MyMesh::begin(bool has_display) {
   _prefs.sf = constrain(_prefs.sf, 5, 12);
   _prefs.cr = constrain(_prefs.cr, 5, 8);
   _prefs.tx_power_dbm = constrain(_prefs.tx_power_dbm, 1, MAX_LORA_TX_POWER);
+  _prefs.buzzer_quiet = constrain(_prefs.buzzer_quiet, 0, 1);  // Ensure boolean 0 or 1
   _prefs.gps_enabled = constrain(_prefs.gps_enabled, 0, 1);  // Ensure boolean 0 or 1
   _prefs.gps_interval = constrain(_prefs.gps_interval, 0, 86400);  // Max 24 hours
 
@@ -803,6 +861,7 @@ void MyMesh::begin(bool has_display) {
 
   resetContacts();
   _store->loadContacts(this);
+  bootstrapRTCfromContacts();
   addChannel("Public", PUBLIC_GROUP_PSK); // pre-configure Andy's public channel
   _store->loadChannels(this);
 
@@ -1235,16 +1294,20 @@ void MyMesh::handleCmdFrame(size_t len) {
 #endif
   } else if (cmd_frame[0] == CMD_IMPORT_PRIVATE_KEY && len >= 65) {
 #if ENABLE_PRIVATE_KEY_IMPORT
-    mesh::LocalIdentity identity;
-    identity.readFrom(&cmd_frame[1], 64);
-    if (_store->saveMainIdentity(identity)) {
-      self_id = identity;
-      writeOKFrame();
-      // re-load contacts, to invalidate ecdh shared_secrets
-      resetContacts();
-      _store->loadContacts(this);
+    if (!mesh::LocalIdentity::validatePrivateKey(&cmd_frame[1])) {
+        writeErrFrame(ERR_CODE_ILLEGAL_ARG); // invalid key
     } else {
-      writeErrFrame(ERR_CODE_FILE_IO_ERROR);
+        mesh::LocalIdentity identity;
+        identity.readFrom(&cmd_frame[1], 64);
+        if (_store->saveMainIdentity(identity)) {
+          self_id = identity;
+          writeOKFrame();
+          // re-load contacts, to invalidate ecdh shared_secrets
+          resetContacts();
+          _store->loadContacts(this);
+        } else {
+          writeErrFrame(ERR_CODE_FILE_IO_ERROR);
+        }
     }
 #else
     writeDisabledFrame();
@@ -1663,6 +1726,15 @@ void MyMesh::handleCmdFrame(size_t len) {
     } else {
       writeErrFrame(ERR_CODE_TABLE_FULL);
     }
+  } else if (cmd_frame[0] == CMD_SET_AUTOADD_CONFIG) {
+    _prefs.autoadd_config = cmd_frame[1];
+    savePrefs();
+    writeOKFrame();  
+  } else if (cmd_frame[0] == CMD_GET_AUTOADD_CONFIG) {
+    int i = 0;
+    out_frame[i++] = RESP_CODE_AUTOADD_CONFIG;
+    out_frame[i++] = _prefs.autoadd_config;
+    _serial->writeFrame(out_frame, i);
   } else {
     writeErrFrame(ERR_CODE_UNSUPPORTED_CMD);
     MESH_DEBUG_PRINTLN("ERROR: unknown command: %02X", cmd_frame[0]);
diff --git a/examples/companion_radio/MyMesh.h b/examples/companion_radio/MyMesh.h
index 1fcc5697..95265a19 100644
--- a/examples/companion_radio/MyMesh.h
+++ b/examples/companion_radio/MyMesh.h
@@ -8,11 +8,11 @@
 #define FIRMWARE_VER_CODE 8
 
 #ifndef FIRMWARE_BUILD_DATE
-#define FIRMWARE_BUILD_DATE "30 Nov 2025"
+#define FIRMWARE_BUILD_DATE "29 Jan 2026"
 #endif
 
 #ifndef FIRMWARE_VERSION
-#define FIRMWARE_VERSION "v1.11.0"
+#define FIRMWARE_VERSION "v1.12.0"
 #endif
 
 #if defined(NRF52_PLATFORM) || defined(STM32_PLATFORM)
@@ -114,6 +114,10 @@ protected:
 
   void logRxRaw(float snr, float rssi, const uint8_t raw[], int len) override;
   bool isAutoAddEnabled() const override;
+  bool shouldAutoAddContactType(uint8_t type) const override;
+  bool shouldOverwriteWhenFull() const override;
+  void onContactsFull() override;
+  void onContactOverwrite(const uint8_t* pub_key) override;
   bool onContactPathRecv(ContactInfo& from, uint8_t* in_path, uint8_t in_path_len, uint8_t* out_path, uint8_t out_path_len, uint8_t extra_type, uint8_t* extra, uint8_t extra_len) override;
   void onDiscoveredContact(ContactInfo &contact, bool is_new, uint8_t path_len, const uint8_t* path) override;
   void onContactPathUpdated(const ContactInfo &contact) override;
diff --git a/examples/companion_radio/NodePrefs.h b/examples/companion_radio/NodePrefs.h
index e9db5444..62cd4164 100644
--- a/examples/companion_radio/NodePrefs.h
+++ b/examples/companion_radio/NodePrefs.h
@@ -27,4 +27,5 @@ struct NodePrefs {  // persisted to file
   uint8_t  buzzer_quiet;
   uint8_t  gps_enabled;      // GPS enabled flag (0=disabled, 1=enabled)
   uint32_t gps_interval;     // GPS read interval in seconds
+  uint8_t autoadd_config;    // bitmask for auto-add contacts config
 };
\ No newline at end of file
diff --git a/examples/companion_radio/main.cpp b/examples/companion_radio/main.cpp
index 82c8c21d..7e636ace 100644
--- a/examples/companion_radio/main.cpp
+++ b/examples/companion_radio/main.cpp
@@ -151,9 +151,7 @@ void setup() {
   );
 
 #ifdef BLE_PIN_CODE
-  char dev_name[32+16];
-  sprintf(dev_name, "%s%s", BLE_NAME_PREFIX, the_mesh.getNodeName());
-  serial_interface.begin(dev_name, the_mesh.getBLEPin());
+  serial_interface.begin(BLE_NAME_PREFIX, the_mesh.getNodePrefs()->node_name, the_mesh.getBLEPin());
 #else
   serial_interface.begin(Serial);
 #endif
@@ -199,9 +197,7 @@ void setup() {
   WiFi.begin(WIFI_SSID, WIFI_PWD);
   serial_interface.begin(TCP_PORT);
 #elif defined(BLE_PIN_CODE)
-  char dev_name[32+16];
-  sprintf(dev_name, "%s%s", BLE_NAME_PREFIX, the_mesh.getNodeName());
-  serial_interface.begin(dev_name, the_mesh.getBLEPin());
+  serial_interface.begin(BLE_NAME_PREFIX, the_mesh.getNodePrefs()->node_name, the_mesh.getBLEPin());
 #elif defined(SERIAL_RX)
   companion_serial.setPins(SERIAL_RX, SERIAL_TX);
   companion_serial.begin(115200);
diff --git a/examples/simple_repeater/MyMesh.cpp b/examples/simple_repeater/MyMesh.cpp
index d926148d..6d957cc0 100644
--- a/examples/simple_repeater/MyMesh.cpp
+++ b/examples/simple_repeater/MyMesh.cpp
@@ -226,7 +226,7 @@ int MyMesh::handleRequest(ClientInfo *sender, uint32_t sender_timestamp, uint8_t
     stats.n_direct_dups = ((SimpleMeshTables *)getTables())->getNumDirectDups();
     stats.n_flood_dups = ((SimpleMeshTables *)getTables())->getNumFloodDups();
     stats.total_rx_air_time_secs = getReceiveAirTime() / 1000;
-
+    stats.n_recv_errors = radio_driver.getPacketsRecvErrors();
     memcpy(&reply_data[4], &stats, sizeof(stats));
 
     return 4 + sizeof(stats); //  reply_len
@@ -744,7 +744,7 @@ void MyMesh::onControlDataRecv(mesh::Packet* packet) {
 MyMesh::MyMesh(mesh::MainBoard &board, mesh::Radio &radio, mesh::MillisecondClock &ms, mesh::RNG &rng,
                mesh::RTCClock &rtc, mesh::MeshTables &tables)
     : mesh::Mesh(radio, ms, rng, rtc, *new StaticPoolPacketManager(32), tables),
-      _cli(board, rtc, sensors, &_prefs, this), telemetry(MAX_PACKET_PAYLOAD - 4), region_map(key_store), temp_map(key_store),
+      _cli(board, rtc, sensors, acl, &_prefs, this), telemetry(MAX_PACKET_PAYLOAD - 4), region_map(key_store), temp_map(key_store),
       discover_limiter(4, 120),  // max 4 every 2 minutes
       anon_limiter(4, 180)   // max 4 every 3 minutes
 #if defined(WITH_RS232_BRIDGE)
@@ -808,7 +808,7 @@ void MyMesh::begin(FILESYSTEM *fs) {
   _fs = fs;
   // load persisted prefs
   _cli.loadPrefs(_fs);
-  acl.load(_fs);
+  acl.load(_fs, self_id);
   // TODO: key_store.begin();
   region_map.load(_fs);
 
@@ -854,10 +854,14 @@ bool MyMesh::formatFileSystem() {
 #endif
 }
 
-void MyMesh::sendSelfAdvertisement(int delay_millis) {
+void MyMesh::sendSelfAdvertisement(int delay_millis, bool flood) {
   mesh::Packet *pkt = createSelfAdvert();
   if (pkt) {
-    sendFlood(pkt, delay_millis);
+    if (flood) {
+      sendFlood(pkt, delay_millis);
+    } else {
+      sendZeroHop(pkt, delay_millis);
+    }
   } else {
     MESH_DEBUG_PRINTLN("ERROR: unable to create advertisement packet!");
   }
@@ -968,7 +972,6 @@ void MyMesh::formatPacketStatsReply(char *reply) {
 }
 
 void MyMesh::saveIdentity(const mesh::LocalIdentity &new_id) {
-  self_id = new_id;
 #if defined(NRF52_PLATFORM) || defined(STM32_PLATFORM)
   IdentityStore store(*_fs, "");
 #elif defined(ESP32)
@@ -978,7 +981,7 @@ void MyMesh::saveIdentity(const mesh::LocalIdentity &new_id) {
 #else
 #error "need to define saveIdentity()"
 #endif
-  store.save("_main", self_id);
+  store.save("_main", new_id);
 }
 
 void MyMesh::clearStats() {
@@ -1069,8 +1072,8 @@ void MyMesh::handleCommand(uint32_t sender_timestamp, char *command, char *reply
 
     const char* parts[4];
     int n = mesh::Utils::parseTextParts(command, parts, 4, ' ');
-    if (n == 1 && sender_timestamp == 0) {
-      region_map.exportTo(Serial);
+    if (n == 1) {
+      region_map.exportTo(reply, 160);
     } else if (n >= 2 && strcmp(parts[1], "load") == 0) {
       temp_map.resetFrom(region_map);   // rebuild regions in a temp instance
       memset(load_stack, 0, sizeof(load_stack));
@@ -1143,6 +1146,25 @@ void MyMesh::handleCommand(uint32_t sender_timestamp, char *command, char *reply
       } else {
         strcpy(reply, "Err - not found");
       }
+    } else if (n >= 3 && strcmp(parts[1], "list") == 0) {
+      uint8_t mask = 0;
+      bool invert = false;
+      
+      if (strcmp(parts[2], "allowed") == 0) {
+        mask = REGION_DENY_FLOOD;
+        invert = false;  // list regions that DON'T have DENY flag
+      } else if (strcmp(parts[2], "denied") == 0) {
+        mask = REGION_DENY_FLOOD;
+        invert = true;   // list regions that DO have DENY flag
+      } else {
+        strcpy(reply, "Err - use 'allowed' or 'denied'");
+        return;
+      }
+      
+      int len = region_map.exportNamesTo(reply, 160, mask, invert);
+      if (len == 0) {
+        strcpy(reply, "-none-");
+      }
     } else {
       strcpy(reply, "Err - ??");
     }
diff --git a/examples/simple_repeater/MyMesh.h b/examples/simple_repeater/MyMesh.h
index f930ee7e..0d5cd28a 100644
--- a/examples/simple_repeater/MyMesh.h
+++ b/examples/simple_repeater/MyMesh.h
@@ -54,6 +54,7 @@ struct RepeaterStats {
   int16_t  last_snr;   // x 4
   uint16_t n_direct_dups, n_flood_dups;
   uint32_t total_rx_air_time_secs;
+  uint32_t n_recv_errors;
 };
 
 #ifndef MAX_CLIENTS
@@ -68,11 +69,11 @@ struct NeighbourInfo {
 };
 
 #ifndef FIRMWARE_BUILD_DATE
-  #define FIRMWARE_BUILD_DATE   "30 Nov 2025"
+  #define FIRMWARE_BUILD_DATE   "29 Jan 2026"
 #endif
 
 #ifndef FIRMWARE_VERSION
-  #define FIRMWARE_VERSION   "v1.11.0"
+  #define FIRMWARE_VERSION   "v1.12.0"
 #endif
 
 #define FIRMWARE_ROLE "repeater"
@@ -86,11 +87,11 @@ class MyMesh : public mesh::Mesh, public CommonCLICallbacks {
   unsigned long next_local_advert, next_flood_advert;
   bool _logging;
   NodePrefs _prefs;
+  ClientACL  acl;
   CommonCLI _cli;
   uint8_t reply_data[MAX_PACKET_PAYLOAD];
   uint8_t reply_path[MAX_PATH_SIZE];
   int8_t  reply_path_len;
-  ClientACL  acl;
   TransportKeyStore key_store;
   RegionMap region_map, temp_map;
   RegionEntry* load_stack[8];
@@ -186,7 +187,7 @@ public:
 
   void applyTempRadioParams(float freq, float bw, uint8_t sf, uint8_t cr, int timeout_mins) override;
   bool formatFileSystem() override;
-  void sendSelfAdvertisement(int delay_millis) override;
+  void sendSelfAdvertisement(int delay_millis, bool flood) override;
   void updateAdvertTimer() override;
   void updateFloodAdvertTimer() override;
 
diff --git a/examples/simple_repeater/main.cpp b/examples/simple_repeater/main.cpp
index 8c745613..d55d6118 100644
--- a/examples/simple_repeater/main.cpp
+++ b/examples/simple_repeater/main.cpp
@@ -87,8 +87,10 @@ void setup() {
   ui_task.begin(the_mesh.getNodePrefs(), FIRMWARE_BUILD_DATE, FIRMWARE_VERSION);
 #endif
 
-  // send out initial Advertisement to the mesh
-  the_mesh.sendSelfAdvertisement(16000);
+  // send out initial zero hop Advertisement to the mesh
+#if ENABLE_ADVERT_ON_BOOT == 1
+  the_mesh.sendSelfAdvertisement(16000, false);
+#endif
 }
 
 void loop() {
diff --git a/examples/simple_room_server/MyMesh.cpp b/examples/simple_room_server/MyMesh.cpp
index 60dd1840..22a3d208 100644
--- a/examples/simple_room_server/MyMesh.cpp
+++ b/examples/simple_room_server/MyMesh.cpp
@@ -587,7 +587,7 @@ void MyMesh::onAckRecv(mesh::Packet *packet, uint32_t ack_crc) {
 MyMesh::MyMesh(mesh::MainBoard &board, mesh::Radio &radio, mesh::MillisecondClock &ms, mesh::RNG &rng,
                mesh::RTCClock &rtc, mesh::MeshTables &tables)
     : mesh::Mesh(radio, ms, rng, rtc, *new StaticPoolPacketManager(32), tables),
-      _cli(board, rtc, sensors, &_prefs, this), telemetry(MAX_PACKET_PAYLOAD - 4) {
+      _cli(board, rtc, sensors, acl, &_prefs, this), telemetry(MAX_PACKET_PAYLOAD - 4) {
   last_millis = 0;
   uptime_millis = 0;
   next_local_advert = next_flood_advert = 0;
@@ -637,7 +637,7 @@ void MyMesh::begin(FILESYSTEM *fs) {
   // load persisted prefs
   _cli.loadPrefs(_fs);
 
-  acl.load(_fs);
+  acl.load(_fs, self_id);
 
   radio_set_params(_prefs.freq, _prefs.bw, _prefs.sf, _prefs.cr);
   radio_set_tx_power(_prefs.tx_power_dbm);
@@ -675,10 +675,14 @@ bool MyMesh::formatFileSystem() {
 #endif
 }
 
-void MyMesh::sendSelfAdvertisement(int delay_millis) {
+void MyMesh::sendSelfAdvertisement(int delay_millis, bool flood) {
   mesh::Packet *pkt = createSelfAdvert();
   if (pkt) {
-    sendFlood(pkt, delay_millis);
+    if (flood) {
+      sendFlood(pkt, delay_millis);
+    } else {
+      sendZeroHop(pkt, delay_millis);
+    }
   } else {
     MESH_DEBUG_PRINTLN("ERROR: unable to create advertisement packet!");
   }
@@ -720,7 +724,6 @@ void MyMesh::setTxPower(uint8_t power_dbm) {
 }
 
 void MyMesh::saveIdentity(const mesh::LocalIdentity &new_id) {
-  self_id = new_id;
 #if defined(NRF52_PLATFORM) || defined(STM32_PLATFORM)
   IdentityStore store(*_fs, "");
 #elif defined(ESP32)
@@ -730,7 +733,7 @@ void MyMesh::saveIdentity(const mesh::LocalIdentity &new_id) {
 #else
 #error "need to define saveIdentity()"
 #endif
-  store.save("_main", self_id);
+  store.save("_main", new_id);
 }
 
 void MyMesh::clearStats() {
@@ -815,7 +818,7 @@ void MyMesh::loop() {
       if (c->extra.room.pending_ack && millisHasNowPassed(c->extra.room.ack_timeout)) {
         c->extra.room.push_failures++;
         c->extra.room.pending_ack = 0; // reset  (TODO: keep prev expected_ack's in a list, incase they arrive LATER, after we retry)
-        MESH_DEBUG_PRINTLN("pending ACK timed out: push_failures: %d", (uint32_t)c->push_failures);
+        MESH_DEBUG_PRINTLN("pending ACK timed out: push_failures: %d", (uint32_t)c->extra.room.push_failures);
       }
     }
     // check next Round-Robin client, and sync next new post
diff --git a/examples/simple_room_server/MyMesh.h b/examples/simple_room_server/MyMesh.h
index e7f1fee8..f470e55e 100644
--- a/examples/simple_room_server/MyMesh.h
+++ b/examples/simple_room_server/MyMesh.h
@@ -26,11 +26,11 @@
 /* ------------------------------ Config -------------------------------- */
 
 #ifndef FIRMWARE_BUILD_DATE
-  #define FIRMWARE_BUILD_DATE   "30 Nov 2025"
+  #define FIRMWARE_BUILD_DATE   "29 Jan 2026"
 #endif
 
 #ifndef FIRMWARE_VERSION
-  #define FIRMWARE_VERSION   "v1.11.0"
+  #define FIRMWARE_VERSION   "v1.12.0"
 #endif
 
 #ifndef LORA_FREQ
@@ -94,8 +94,8 @@ class MyMesh : public mesh::Mesh, public CommonCLICallbacks {
   unsigned long next_local_advert, next_flood_advert;
   bool _logging;
   NodePrefs _prefs;
-  CommonCLI _cli;
   ClientACL acl;
+  CommonCLI _cli;
   unsigned long dirty_contacts_expiry;
   uint8_t reply_data[MAX_PACKET_PAYLOAD];
   unsigned long next_push;
@@ -177,7 +177,7 @@ public:
 
   void applyTempRadioParams(float freq, float bw, uint8_t sf, uint8_t cr, int timeout_mins) override;
   bool formatFileSystem() override;
-  void sendSelfAdvertisement(int delay_millis) override;
+  void sendSelfAdvertisement(int delay_millis, bool flood) override;
   void updateAdvertTimer() override;
   void updateFloodAdvertTimer() override;
 
diff --git a/examples/simple_room_server/main.cpp b/examples/simple_room_server/main.cpp
index 1a3b4d6e..825fb007 100644
--- a/examples/simple_room_server/main.cpp
+++ b/examples/simple_room_server/main.cpp
@@ -76,8 +76,10 @@ void setup() {
   ui_task.begin(the_mesh.getNodePrefs(), FIRMWARE_BUILD_DATE, FIRMWARE_VERSION);
 #endif
 
-  // send out initial Advertisement to the mesh
-  the_mesh.sendSelfAdvertisement(16000);
+  // send out initial zero hop Advertisement to the mesh
+#if ENABLE_ADVERT_ON_BOOT == 1
+  the_mesh.sendSelfAdvertisement(16000, false);
+#endif
 }
 
 void loop() {
diff --git a/examples/simple_secure_chat/main.cpp b/examples/simple_secure_chat/main.cpp
index da1bac5b..018ec2a2 100644
--- a/examples/simple_secure_chat/main.cpp
+++ b/examples/simple_secure_chat/main.cpp
@@ -582,7 +582,9 @@ void setup() {
   the_mesh.showWelcome();
 
   // send out initial Advertisement to the mesh
+#if ENABLE_ADVERT_ON_BOOT == 1
   the_mesh.sendSelfAdvert(1200);   // add slight delay
+#endif
 }
 
 void loop() {
diff --git a/examples/simple_sensor/SensorMesh.cpp b/examples/simple_sensor/SensorMesh.cpp
index 4995c55f..8e27323e 100644
--- a/examples/simple_sensor/SensorMesh.cpp
+++ b/examples/simple_sensor/SensorMesh.cpp
@@ -695,7 +695,7 @@ void SensorMesh::onAckRecv(mesh::Packet* packet, uint32_t ack_crc) {
 
 SensorMesh::SensorMesh(mesh::MainBoard& board, mesh::Radio& radio, mesh::MillisecondClock& ms, mesh::RNG& rng, mesh::RTCClock& rtc, mesh::MeshTables& tables)
      : mesh::Mesh(radio, ms, rng, rtc, *new StaticPoolPacketManager(32), tables),
-      _cli(board, rtc, sensors, &_prefs, this), telemetry(MAX_PACKET_PAYLOAD - 4)
+      _cli(board, rtc, sensors, acl, &_prefs, this), telemetry(MAX_PACKET_PAYLOAD - 4)
 {
   next_local_advert = next_flood_advert = 0;
   dirty_contacts_expiry = 0;
@@ -736,7 +736,7 @@ void SensorMesh::begin(FILESYSTEM* fs) {
   // load persisted prefs
   _cli.loadPrefs(_fs);
 
-  acl.load(_fs);
+  acl.load(_fs, self_id);
 
   radio_set_params(_prefs.freq, _prefs.bw, _prefs.sf, _prefs.cr);
   radio_set_tx_power(_prefs.tx_power_dbm);
@@ -765,7 +765,6 @@ bool SensorMesh::formatFileSystem() {
 }
 
 void SensorMesh::saveIdentity(const mesh::LocalIdentity& new_id) {
-  self_id = new_id;
 #if defined(NRF52_PLATFORM) || defined(STM32_PLATFORM)
   IdentityStore store(*_fs, "");
 #elif defined(ESP32)
@@ -775,7 +774,7 @@ void SensorMesh::saveIdentity(const mesh::LocalIdentity& new_id) {
 #else
   #error "need to define saveIdentity()"
 #endif
-  store.save("_main", self_id);
+  store.save("_main", new_id);
 }
 
 void SensorMesh::applyTempRadioParams(float freq, float bw, uint8_t sf, uint8_t cr, int timeout_mins) {
@@ -788,10 +787,14 @@ void SensorMesh::applyTempRadioParams(float freq, float bw, uint8_t sf, uint8_t
   revert_radio_at = futureMillis(2000 + timeout_mins*60*1000);   // schedule when to revert radio params
 }
 
-void SensorMesh::sendSelfAdvertisement(int delay_millis) {
+void SensorMesh::sendSelfAdvertisement(int delay_millis, bool flood) {
   mesh::Packet* pkt = createSelfAdvert();
   if (pkt) {
-    sendFlood(pkt, delay_millis);
+    if (flood) {
+      sendFlood(pkt, delay_millis);
+    } else {
+      sendZeroHop(pkt, delay_millis);
+    }
   } else {
     MESH_DEBUG_PRINTLN("ERROR: unable to create advertisement packet!");
   }
diff --git a/examples/simple_sensor/SensorMesh.h b/examples/simple_sensor/SensorMesh.h
index c320eb44..ed352345 100644
--- a/examples/simple_sensor/SensorMesh.h
+++ b/examples/simple_sensor/SensorMesh.h
@@ -33,11 +33,11 @@
 #define PERM_RECV_ALERTS_HI    (1 << 7)   // high priority alerts
 
 #ifndef FIRMWARE_BUILD_DATE
-  #define FIRMWARE_BUILD_DATE   "30 Nov 2025"
+  #define FIRMWARE_BUILD_DATE   "29 Jan 2026"
 #endif
 
 #ifndef FIRMWARE_VERSION
-  #define FIRMWARE_VERSION   "v1.11.0"
+  #define FIRMWARE_VERSION   "v1.12.0"
 #endif
 
 #define FIRMWARE_ROLE "sensor"
@@ -60,7 +60,7 @@ public:
   NodePrefs* getNodePrefs() { return &_prefs; }
   void savePrefs() override { _cli.savePrefs(_fs); }
   bool formatFileSystem() override;
-  void sendSelfAdvertisement(int delay_millis) override;
+  void sendSelfAdvertisement(int delay_millis, bool flood) override;
   void updateAdvertTimer() override;
   void updateFloodAdvertTimer() override;
   void setLoggingOn(bool enable) override {  }
@@ -133,9 +133,9 @@ private:
   FILESYSTEM* _fs;
   unsigned long next_local_advert, next_flood_advert;
   NodePrefs _prefs;
+  ClientACL  acl;
   CommonCLI _cli;
   uint8_t reply_data[MAX_PACKET_PAYLOAD];
-  ClientACL  acl;
   unsigned long dirty_contacts_expiry;
   CayenneLPP telemetry;
   uint32_t last_read_time;
diff --git a/examples/simple_sensor/main.cpp b/examples/simple_sensor/main.cpp
index a5fcc148..330adcc2 100644
--- a/examples/simple_sensor/main.cpp
+++ b/examples/simple_sensor/main.cpp
@@ -110,8 +110,10 @@ void setup() {
   ui_task.begin(the_mesh.getNodePrefs(), FIRMWARE_BUILD_DATE, FIRMWARE_VERSION);
 #endif
 
-  // send out initial Advertisement to the mesh
-  the_mesh.sendSelfAdvertisement(16000);
+  // send out initial zero hop Advertisement to the mesh
+#if ENABLE_ADVERT_ON_BOOT == 1
+  the_mesh.sendSelfAdvertisement(16000, false);
+#endif
 }
 
 void loop() {
diff --git a/platformio.ini b/platformio.ini
index 75d37e86..743e357a 100644
--- a/platformio.ini
+++ b/platformio.ini
@@ -27,6 +27,7 @@ build_flags = -w -DNDEBUG -DRADIOLIB_STATIC_ONLY=1 -DRADIOLIB_GODMODE=1
   -D LORA_FREQ=869.525
   -D LORA_BW=250
   -D LORA_SF=11
+  -D ENABLE_ADVERT_ON_BOOT=1
   -D ENABLE_PRIVATE_KEY_IMPORT=1   ; NOTE: comment these out for more secure firmware
   -D ENABLE_PRIVATE_KEY_EXPORT=1
   -D RADIOLIB_EXCLUDE_CC1101=1
diff --git a/src/Identity.cpp b/src/Identity.cpp
index 83298928..ea546274 100644
--- a/src/Identity.cpp
+++ b/src/Identity.cpp
@@ -48,6 +48,50 @@ LocalIdentity::LocalIdentity(RNG* rng) {
   ed25519_create_keypair(pub_key, prv_key, seed);
 }
 
+bool LocalIdentity::validatePrivateKey(const uint8_t prv[64]) {
+    uint8_t pub[32];
+    ed25519_derive_pub(pub, prv); // derive public key from given private key
+
+    // disallow 00 or FF prefixed public keys
+    if (pub[0] == 0x00 || pub[0] == 0xFF) return false;
+
+    // known good test client keypair
+    const uint8_t test_client_prv[64] = {
+      0x70, 0x65, 0xe1, 0x8f, 0xd9, 0xfa, 0xbb, 0x70,
+      0xc1, 0xed, 0x90, 0xdc, 0xa1, 0x99, 0x07, 0xde,
+      0x69, 0x8c, 0x88, 0xb7, 0x09, 0xea, 0x14, 0x6e,
+      0xaf, 0xd9, 0x3d, 0x9b, 0x83, 0x0c, 0x7b, 0x60,
+      0xc4, 0x68, 0x11, 0x93, 0xc7, 0x9b, 0xbc, 0x39,
+      0x94, 0x5b, 0xa8, 0x06, 0x41, 0x04, 0xbb, 0x61,
+      0x8f, 0x8f, 0xd7, 0xa8, 0x4a, 0x0a, 0xf6, 0xf5,
+      0x70, 0x33, 0xd6, 0xe8, 0xdd, 0xcd, 0x64, 0x71
+    };
+    const uint8_t test_client_pub[32] = {
+      0x1e, 0xc7, 0x71, 0x75, 0xb0, 0x91, 0x8e, 0xd2,
+      0x06, 0xf9, 0xae, 0x04, 0xec, 0x13, 0x6d, 0x6d,
+      0x5d, 0x43, 0x15, 0xbb, 0x26, 0x30, 0x54, 0x27,
+      0xf6, 0x45, 0xb4, 0x92, 0xe9, 0x35, 0x0c, 0x10
+    };
+
+    uint8_t ss1[32], ss2[32];
+
+    // shared secret we calculte from test client pubkey and given private key
+    ed25519_key_exchange(ss1, test_client_pub, prv);
+
+    // shared secret they calculate from our derived public key and test client private key
+    ed25519_key_exchange(ss2, pub, test_client_prv);
+
+    // check that both shared secrets match
+    if (memcmp(ss1, ss2, 32) != 0) return false;
+
+    // reject all-zero shared secret
+    for (int i = 0; i < 32; i++) {
+        if (ss1[i] != 0) return true;
+    }
+
+    return false;
+}
+
 bool LocalIdentity::readFrom(Stream& s) {
   bool success = (s.readBytes(pub_key, PUB_KEY_SIZE) == PUB_KEY_SIZE);
   success = success && (s.readBytes(prv_key, PRV_KEY_SIZE) == PRV_KEY_SIZE);
diff --git a/src/Identity.h b/src/Identity.h
index 60e8783b..c3ffcd75 100644
--- a/src/Identity.h
+++ b/src/Identity.h
@@ -76,6 +76,13 @@ public:
   */
   void calcSharedSecret(uint8_t* secret, const uint8_t* other_pub_key) const;
 
+  /**
+   * \brief  Validates that a given private key can be used for ECDH / shared-secret operations.
+   * \param  prv IN - the private key to validate (must be PRV_KEY_SIZE bytes)
+   * \returns true, if the private key is valid for login.
+  */
+  static bool validatePrivateKey(const uint8_t prv[64]);
+
   bool readFrom(Stream& s);
   bool writeTo(Stream& s) const;
   void printTo(Stream& s) const;
diff --git a/src/MeshCore.h b/src/MeshCore.h
index 718660d3..f194cdeb 100644
--- a/src/MeshCore.h
+++ b/src/MeshCore.h
@@ -56,6 +56,14 @@ public:
   virtual void setGpio(uint32_t values) {}
   virtual uint8_t getStartupReason() const = 0;
   virtual bool startOTAUpdate(const char* id, char reply[]) { return false; }   // not supported
+
+  // Power management interface (boards with power management override these)
+  virtual bool isExternalPowered() { return false; }
+  virtual uint16_t getBootVoltage() { return 0; }
+  virtual uint32_t getResetReason() const { return 0; }
+  virtual const char* getResetReasonString(uint32_t reason) { return "Not available"; }
+  virtual uint8_t getShutdownReason() const { return 0; }
+  virtual const char* getShutdownReasonString(uint8_t reason) { return "Not available"; }
 };
 
 /**
diff --git a/src/helpers/BaseChatMesh.cpp b/src/helpers/BaseChatMesh.cpp
index 08185628..aebfc1b6 100644
--- a/src/helpers/BaseChatMesh.cpp
+++ b/src/helpers/BaseChatMesh.cpp
@@ -55,6 +55,54 @@ void BaseChatMesh::sendAckTo(const ContactInfo& dest, uint32_t ack_hash) {
   }
 }
 
+void BaseChatMesh::bootstrapRTCfromContacts() {
+  uint32_t latest = 0;
+  for (int i = 0; i < num_contacts; i++) {
+    if (contacts[i].lastmod > latest) {
+      latest = contacts[i].lastmod;
+    }
+  }
+  if (latest != 0) {
+    getRTCClock()->setCurrentTime(latest + 1);
+  }
+}
+
+ContactInfo* BaseChatMesh::allocateContactSlot() {
+  if (num_contacts < MAX_CONTACTS) {
+    return &contacts[num_contacts++];
+  } else if (shouldOverwriteWhenFull()) {
+    // Find oldest non-favourite contact by oldest lastmod timestamp
+    int oldest_idx = -1;
+    uint32_t oldest_lastmod = 0xFFFFFFFF;
+    for (int i = 0; i < num_contacts; i++) {
+      bool is_favourite = (contacts[i].flags & 0x01) != 0;
+      if (!is_favourite && contacts[i].lastmod < oldest_lastmod) {
+        oldest_lastmod = contacts[i].lastmod;
+        oldest_idx = i;
+      }
+    }
+    if (oldest_idx >= 0) {
+      onContactOverwrite(contacts[oldest_idx].id.pub_key);
+      return &contacts[oldest_idx];
+    }
+  }
+  return NULL; // no space, no overwrite or all contacts are all favourites
+}
+
+void BaseChatMesh::populateContactFromAdvert(ContactInfo& ci, const mesh::Identity& id, const AdvertDataParser& parser, uint32_t timestamp) {
+  memset(&ci, 0, sizeof(ci));
+  ci.id = id;
+  ci.out_path_len = -1;  // initially out_path is unknown
+  StrHelper::strncpy(ci.name, parser.getName(), sizeof(ci.name));
+  ci.type = parser.getType();
+  if (parser.hasLatLon()) {
+    ci.gps_lat = parser.getIntLat();
+    ci.gps_lon = parser.getIntLon();
+  }
+  ci.last_advert_timestamp = timestamp;
+  ci.lastmod = getRTCClock()->getCurrentTime();
+}
+
 void BaseChatMesh::onAdvertRecv(mesh::Packet* packet, const mesh::Identity& id, uint32_t timestamp, const uint8_t* app_data, size_t app_data_len) {
   AdvertDataParser parser(app_data, app_data_len);
   if (!(parser.isValid() && parser.hasName())) {
@@ -85,50 +133,38 @@ void BaseChatMesh::onAdvertRecv(mesh::Packet* packet, const mesh::Identity& id,
   }
   putBlobByKey(id.pub_key, PUB_KEY_SIZE, temp_buf, plen);
 
-  bool is_new = false;
+  bool is_new = false; // true = not in contacts[], false = exists in contacts[]
   if (from == NULL) {
-    if (!isAutoAddEnabled()) {
+    if (!shouldAutoAddContactType(parser.getType())) {
       ContactInfo ci;
-      memset(&ci, 0, sizeof(ci));
-      ci.id = id;
-      ci.out_path_len = -1;  // initially out_path is unknown
-      StrHelper::strncpy(ci.name, parser.getName(), sizeof(ci.name));
-      ci.type = parser.getType();
-      if (parser.hasLatLon()) {
-        ci.gps_lat = parser.getIntLat();
-        ci.gps_lon = parser.getIntLon();
-      }
-      ci.last_advert_timestamp = timestamp;
-      ci.lastmod = getRTCClock()->getCurrentTime();
+      populateContactFromAdvert(ci, id, parser, timestamp);
       onDiscoveredContact(ci, true, packet->path_len, packet->path);       // let UI know
       return;
     }
 
-    is_new = true;
-    if (num_contacts < MAX_CONTACTS) {
-      from = &contacts[num_contacts++];
-      from->id = id;
-      from->out_path_len = -1;  // initially out_path is unknown
-      from->gps_lat = 0;   // initially unknown GPS loc
-      from->gps_lon = 0;
-      from->sync_since = 0;
-
-      from->shared_secret_valid = false;  // ecdh shared_secret will be calculated later on demand  
-    } else {
-      MESH_DEBUG_PRINTLN("onAdvertRecv: contacts table is full!");
+    from = allocateContactSlot();
+    if (from == NULL) {
+      ContactInfo ci;
+      populateContactFromAdvert(ci, id, parser, timestamp);
+      onDiscoveredContact(ci, true, packet->path_len, packet->path);
+      onContactsFull();
+      MESH_DEBUG_PRINTLN("onAdvertRecv: unable to allocate contact slot for new contact");
       return;
     }
+    
+    populateContactFromAdvert(*from, id, parser, timestamp);
+    from->sync_since = 0;
+    from->shared_secret_valid = false;
   }
-
   // update
-  StrHelper::strncpy(from->name, parser.getName(), sizeof(from->name));
-  from->type = parser.getType();
-  if (parser.hasLatLon()) {
-    from->gps_lat = parser.getIntLat();
-    from->gps_lon = parser.getIntLon();
-  }
-  from->last_advert_timestamp = timestamp;
-  from->lastmod = getRTCClock()->getCurrentTime();
+    StrHelper::strncpy(from->name, parser.getName(), sizeof(from->name));
+    from->type = parser.getType();
+    if (parser.hasLatLon()) {
+      from->gps_lat = parser.getIntLat();
+      from->gps_lon = parser.getIntLon();
+    }
+    from->last_advert_timestamp = timestamp;
+    from->lastmod = getRTCClock()->getCurrentTime();
 
   onDiscoveredContact(*from, is_new, packet->path_len, packet->path);       // let UI know
 }
@@ -722,10 +758,9 @@ ContactInfo* BaseChatMesh::lookupContactByPubKey(const uint8_t* pub_key, int pre
 }
 
 bool BaseChatMesh::addContact(const ContactInfo& contact) {
-  if (num_contacts < MAX_CONTACTS) {
-    auto dest = &contacts[num_contacts++];
+  ContactInfo* dest = allocateContactSlot();
+  if (dest) {
     *dest = contact;
-
     dest->shared_secret_valid = false; // mark shared_secret as needing calculation
     return true;  // success
   }
diff --git a/src/helpers/BaseChatMesh.h b/src/helpers/BaseChatMesh.h
index 40818fed..fd391b98 100644
--- a/src/helpers/BaseChatMesh.h
+++ b/src/helpers/BaseChatMesh.h
@@ -88,10 +88,17 @@ protected:
     memset(connections, 0, sizeof(connections));
   }
 
+  void bootstrapRTCfromContacts();
   void resetContacts() { num_contacts = 0; }
+  void populateContactFromAdvert(ContactInfo& ci, const mesh::Identity& id, const AdvertDataParser& parser, uint32_t timestamp);
+  ContactInfo* allocateContactSlot(); // helper to find slot for new contact
 
   // 'UI' concepts, for sub-classes to implement
   virtual bool isAutoAddEnabled() const { return true; }
+  virtual bool shouldAutoAddContactType(uint8_t type) const { return true; }
+  virtual void onContactsFull() {};
+  virtual bool shouldOverwriteWhenFull() const { return false; }
+  virtual void onContactOverwrite(const uint8_t* pub_key) {};
   virtual void onDiscoveredContact(ContactInfo& contact, bool is_new, uint8_t path_len, const uint8_t* path) = 0;
   virtual ContactInfo* processAck(const uint8_t *data) = 0;
   virtual void onContactPathUpdated(const ContactInfo& contact) = 0;
diff --git a/src/helpers/ClientACL.cpp b/src/helpers/ClientACL.cpp
index 4ea19fd2..55b70ca5 100644
--- a/src/helpers/ClientACL.cpp
+++ b/src/helpers/ClientACL.cpp
@@ -11,7 +11,8 @@ static File openWrite(FILESYSTEM* _fs, const char* filename) {
   #endif
 }
 
-void ClientACL::load(FILESYSTEM* _fs) {
+void ClientACL::load(FILESYSTEM* fs, const mesh::LocalIdentity& self_id) {
+  _fs = fs;
   num_clients = 0;
   if (_fs->exists("/s_contacts")) {
   #if defined(RP2040_PLATFORM)
@@ -34,11 +35,12 @@ void ClientACL::load(FILESYSTEM* _fs) {
         success = success && (file.read(unused, 2) == 2);
         success = success && (file.read((uint8_t *)&c.out_path_len, 1) == 1);
         success = success && (file.read(c.out_path, 64) == 64);
-        success = success && (file.read(c.shared_secret, PUB_KEY_SIZE) == PUB_KEY_SIZE);
+        success = success && (file.read(c.shared_secret, PUB_KEY_SIZE) == PUB_KEY_SIZE); // will be recalculated below
 
         if (!success) break; // EOF
 
         c.id = mesh::Identity(pub_key);
+        self_id.calcSharedSecret(c.shared_secret, pub_key);  // recalculate shared secrets in case our private key changed
         if (num_clients < MAX_CLIENTS) {
           clients[num_clients++] = c;
         } else {
@@ -50,7 +52,8 @@ void ClientACL::load(FILESYSTEM* _fs) {
   }
 }
 
-void ClientACL::save(FILESYSTEM* _fs, bool (*filter)(ClientInfo*)) {
+void ClientACL::save(FILESYSTEM* fs, bool (*filter)(ClientInfo*)) {
+  _fs = fs;
   File file = openWrite(_fs, "/s_contacts");
   if (file) {
     uint8_t unused[2];
@@ -74,6 +77,16 @@ void ClientACL::save(FILESYSTEM* _fs, bool (*filter)(ClientInfo*)) {
   }
 }
 
+bool ClientACL::clear() {
+  if (!_fs) return false; // no filesystem, nothing to clear
+  if (_fs->exists("/s_contacts")) {
+    _fs->remove("/s_contacts");
+  }
+  memset(clients, 0, sizeof(clients));
+  num_clients = 0;
+  return true;
+}
+
 ClientInfo* ClientACL::getClient(const uint8_t* pubkey, int key_len) {
   for (int i = 0; i < num_clients; i++) {
     if (memcmp(pubkey, clients[i].id.pub_key, key_len) == 0) return &clients[i];  // already known
diff --git a/src/helpers/ClientACL.h b/src/helpers/ClientACL.h
index 1b650edd..dfbc3fce 100644
--- a/src/helpers/ClientACL.h
+++ b/src/helpers/ClientACL.h
@@ -36,6 +36,7 @@ struct ClientInfo {
 #endif
 
 class ClientACL {
+  FILESYSTEM* _fs;
   ClientInfo clients[MAX_CLIENTS];
   int num_clients;
 
@@ -44,8 +45,9 @@ public:
     memset(clients, 0, sizeof(clients));
     num_clients = 0;
   }
-  void load(FILESYSTEM* _fs);
+  void load(FILESYSTEM* _fs, const mesh::LocalIdentity& self_id);
   void save(FILESYSTEM* _fs, bool (*filter)(ClientInfo*)=NULL);
+  bool clear();
 
   ClientInfo* getClient(const uint8_t* pubkey, int key_len);
   ClientInfo* putClient(const mesh::Identity& id, uint8_t init_perms);
diff --git a/src/helpers/CommonCLI.cpp b/src/helpers/CommonCLI.cpp
index 2fc93006..42198b49 100644
--- a/src/helpers/CommonCLI.cpp
+++ b/src/helpers/CommonCLI.cpp
@@ -196,8 +196,13 @@ uint8_t CommonCLI::buildAdvertData(uint8_t node_type, uint8_t* app_data) {
 void CommonCLI::handleCommand(uint32_t sender_timestamp, const char* command, char* reply) {
     if (memcmp(command, "reboot", 6) == 0) {
       _board->reboot();  // doesn't return
+    } else if (memcmp(command, "clkreboot", 9) == 0) {
+      // Reset clock
+      getRTCClock()->setCurrentTime(1715770351);  // 15 May 2024, 8:50pm
+      _board->reboot();  // doesn't return
     } else if (memcmp(command, "advert", 6) == 0) {
-      _callbacks->sendSelfAdvertisement(1500);  // longer delay, give CLI response time to be sent first
+      // send flood advert
+      _callbacks->sendSelfAdvertisement(1500, true);  // longer delay, give CLI response time to be sent first
       strcpy(reply, "OK - Advert sent");
     } else if (memcmp(command, "clock sync", 10) == 0) {
       uint32_t curr = getRTCClock()->getCurrentTime();
@@ -364,6 +369,33 @@ void CommonCLI::handleCommand(uint32_t sender_timestamp, const char* command, ch
         } else {
           sprintf(reply, "> %.3f", adc_mult);
         }
+      // Power management commands
+      } else if (memcmp(config, "pwrmgt.support", 14) == 0) {
+#ifdef NRF52_POWER_MANAGEMENT
+        strcpy(reply, "> supported");
+#else
+        strcpy(reply, "> unsupported");
+#endif
+      } else if (memcmp(config, "pwrmgt.source", 13) == 0) {
+#ifdef NRF52_POWER_MANAGEMENT
+        strcpy(reply, _board->isExternalPowered() ? "> external" : "> battery");
+#else
+        strcpy(reply, "ERROR: Power management not supported");
+#endif
+      } else if (memcmp(config, "pwrmgt.bootreason", 17) == 0) {
+#ifdef NRF52_POWER_MANAGEMENT
+        sprintf(reply, "> Reset: %s; Shutdown: %s",
+          _board->getResetReasonString(_board->getResetReason()),
+          _board->getShutdownReasonString(_board->getShutdownReason()));
+#else
+        strcpy(reply, "ERROR: Power management not supported");
+#endif
+      } else if (memcmp(config, "pwrmgt.bootmv", 13) == 0) {
+#ifdef NRF52_POWER_MANAGEMENT
+        sprintf(reply, "> %u mV", _board->getBootVoltage());
+#else
+        strcpy(reply, "ERROR: Power management not supported");
+#endif
       } else {
         sprintf(reply, "??: %s", config);
       }
@@ -394,8 +426,8 @@ void CommonCLI::handleCommand(uint32_t sender_timestamp, const char* command, ch
         strcpy(reply, "OK");
       } else if (memcmp(config, "flood.advert.interval ", 22) == 0) {
         int hours = _atoi(&config[22]);
-        if ((hours > 0 && hours < 3) || (hours > 48)) {
-          strcpy(reply, "Error: interval range is 3-48 hours");
+        if ((hours > 0 && hours < 3) || (hours > 168)) {
+          strcpy(reply, "Error: interval range is 3-168 hours");
         } else {
           _prefs->flood_advert_interval = (uint8_t)(hours);
           _callbacks->updateFloodAdvertTimer();
@@ -416,17 +448,18 @@ void CommonCLI::handleCommand(uint32_t sender_timestamp, const char* command, ch
         StrHelper::strncpy(_prefs->guest_password, &config[15], sizeof(_prefs->guest_password));
         savePrefs();
         strcpy(reply, "OK");
-      } else if (sender_timestamp == 0 &&
-                 memcmp(config, "prv.key ", 8) == 0) { // from serial command line only
+      } else if (memcmp(config, "prv.key ", 8) == 0) {
         uint8_t prv_key[PRV_KEY_SIZE];
         bool success = mesh::Utils::fromHex(prv_key, PRV_KEY_SIZE, &config[8]);
-        if (success) {
+        // only allow rekey if key is valid
+        if (success && mesh::LocalIdentity::validatePrivateKey(prv_key)) {
           mesh::LocalIdentity new_id;
           new_id.readFrom(prv_key, PRV_KEY_SIZE);
           _callbacks->saveIdentity(new_id);
-          strcpy(reply, "OK");
+          strcpy(reply, "OK, reboot to apply! New pubkey: ");
+          mesh::Utils::toHex(&reply[33], new_id.pub_key, PUB_KEY_SIZE);
         } else {
-          strcpy(reply, "Error, invalid key");
+          strcpy(reply, "Error, bad key");
         }
       } else if (memcmp(config, "name ", 5) == 0) {
         if (isValidName(&config[5])) {
diff --git a/src/helpers/CommonCLI.h b/src/helpers/CommonCLI.h
index 3b1d05f9..8661d1e6 100644
--- a/src/helpers/CommonCLI.h
+++ b/src/helpers/CommonCLI.h
@@ -3,6 +3,7 @@
 #include "Mesh.h"
 #include <helpers/IdentityStore.h>
 #include <helpers/SensorManager.h>
+#include <helpers/ClientACL.h>
 
 #if defined(WITH_RS232_BRIDGE) || defined(WITH_ESPNOW_BRIDGE)
 #define WITH_BRIDGE
@@ -60,7 +61,7 @@ public:
   virtual const char* getBuildDate() = 0;
   virtual const char* getRole() = 0;
   virtual bool formatFileSystem() = 0;
-  virtual void sendSelfAdvertisement(int delay_millis) = 0;
+  virtual void sendSelfAdvertisement(int delay_millis, bool flood) = 0;
   virtual void updateAdvertTimer() = 0;
   virtual void updateFloodAdvertTimer() = 0;
   virtual void setLoggingOn(bool enable) = 0;
@@ -94,6 +95,7 @@ class CommonCLI {
   CommonCLICallbacks* _callbacks;
   mesh::MainBoard* _board;
   SensorManager* _sensors;
+  ClientACL* _acl;
   char tmp[PRV_KEY_SIZE*2 + 4];
 
   mesh::RTCClock* getRTCClock() { return _rtc; }
@@ -101,8 +103,8 @@ class CommonCLI {
   void loadPrefsInt(FILESYSTEM* _fs, const char* filename);
 
 public:
-  CommonCLI(mesh::MainBoard& board, mesh::RTCClock& rtc, SensorManager& sensors, NodePrefs* prefs, CommonCLICallbacks* callbacks)
-      : _board(&board), _rtc(&rtc), _sensors(&sensors), _prefs(prefs), _callbacks(callbacks) { }
+  CommonCLI(mesh::MainBoard& board, mesh::RTCClock& rtc, SensorManager& sensors, ClientACL& acl, NodePrefs* prefs, CommonCLICallbacks* callbacks)
+      : _board(&board), _rtc(&rtc), _sensors(&sensors), _acl(&acl), _prefs(prefs), _callbacks(callbacks) { }
 
   void loadPrefs(FILESYSTEM* _fs);
   void savePrefs(FILESYSTEM* _fs);
diff --git a/src/helpers/NRF52Board.cpp b/src/helpers/NRF52Board.cpp
index c0d58314..6915c856 100644
--- a/src/helpers/NRF52Board.cpp
+++ b/src/helpers/NRF52Board.cpp
@@ -2,6 +2,7 @@
 #include "NRF52Board.h"
 
 #include <bluefruit.h>
+#include <nrf_soc.h>
 
 static BLEDfu bledfu;
 
@@ -21,6 +22,222 @@ void NRF52Board::begin() {
   startup_reason = BD_STARTUP_NORMAL;
 }
 
+#ifdef NRF52_POWER_MANAGEMENT
+#include "nrf.h"
+
+// Power Management global variables
+uint32_t g_nrf52_reset_reason = 0;     // Reset/Startup reason
+uint8_t g_nrf52_shutdown_reason = 0;   // Shutdown reason
+
+// Early constructor - runs before SystemInit() clears the registers
+// Priority 101 ensures this runs before SystemInit (102) and before
+// any C++ static constructors (default 65535)
+static void __attribute__((constructor(101))) nrf52_early_reset_capture() {
+  g_nrf52_reset_reason = NRF_POWER->RESETREAS;
+  g_nrf52_shutdown_reason = NRF_POWER->GPREGRET2;
+}
+
+void NRF52Board::initPowerMgr() {
+  // Copy early-captured register values
+  reset_reason = g_nrf52_reset_reason;
+  shutdown_reason = g_nrf52_shutdown_reason;
+  boot_voltage_mv = 0;  // Will be set by checkBootVoltage()
+
+  // Clear registers for next boot
+  // Note: At this point SoftDevice may or may not be enabled
+  uint8_t sd_enabled = 0;
+  sd_softdevice_is_enabled(&sd_enabled);
+  if (sd_enabled) {
+    sd_power_reset_reason_clr(0xFFFFFFFF);
+    sd_power_gpregret_clr(1, 0xFF);
+  } else {
+    NRF_POWER->RESETREAS = 0xFFFFFFFF;  // Write 1s to clear
+    NRF_POWER->GPREGRET2 = 0;
+  }
+
+  // Log reset/shutdown info
+  if (shutdown_reason != SHUTDOWN_REASON_NONE) {
+    MESH_DEBUG_PRINTLN("PWRMGT: Reset = %s (0x%lX); Shutdown = %s (0x%02X)",
+      getResetReasonString(reset_reason), (unsigned long)reset_reason,
+      getShutdownReasonString(shutdown_reason), shutdown_reason);
+  } else {
+    MESH_DEBUG_PRINTLN("PWRMGT: Reset = %s (0x%lX)",
+      getResetReasonString(reset_reason), (unsigned long)reset_reason);
+  }
+}
+
+bool NRF52Board::isExternalPowered() {
+  // Check if SoftDevice is enabled before using its API
+  uint8_t sd_enabled = 0;
+  sd_softdevice_is_enabled(&sd_enabled);
+
+  if (sd_enabled) {
+    uint32_t usb_status;
+    sd_power_usbregstatus_get(&usb_status);
+    return (usb_status & POWER_USBREGSTATUS_VBUSDETECT_Msk) != 0;
+  } else {
+    return (NRF_POWER->USBREGSTATUS & POWER_USBREGSTATUS_VBUSDETECT_Msk) != 0;
+  }
+}
+
+const char* NRF52Board::getResetReasonString(uint32_t reason) {
+  if (reason & POWER_RESETREAS_RESETPIN_Msk) return "Reset Pin";
+  if (reason & POWER_RESETREAS_DOG_Msk) return "Watchdog";
+  if (reason & POWER_RESETREAS_SREQ_Msk) return "Soft Reset";
+  if (reason & POWER_RESETREAS_LOCKUP_Msk) return "CPU Lockup";
+  #ifdef POWER_RESETREAS_LPCOMP_Msk
+    if (reason & POWER_RESETREAS_LPCOMP_Msk) return "Wake from LPCOMP";
+  #endif
+  #ifdef POWER_RESETREAS_VBUS_Msk
+    if (reason & POWER_RESETREAS_VBUS_Msk) return "Wake from VBUS";
+  #endif
+  #ifdef POWER_RESETREAS_OFF_Msk
+    if (reason & POWER_RESETREAS_OFF_Msk) return "Wake from GPIO";
+  #endif
+  #ifdef POWER_RESETREAS_DIF_Msk
+    if (reason & POWER_RESETREAS_DIF_Msk) return "Debug Interface";
+  #endif
+  return "Cold Boot";
+}
+
+const char* NRF52Board::getShutdownReasonString(uint8_t reason) {
+  switch (reason) {
+    case SHUTDOWN_REASON_LOW_VOLTAGE:  return "Low Voltage";
+    case SHUTDOWN_REASON_USER:         return "User Request";
+    case SHUTDOWN_REASON_BOOT_PROTECT: return "Boot Protection";
+  }
+  return "Unknown";
+}
+
+bool NRF52Board::checkBootVoltage(const PowerMgtConfig* config) {
+  initPowerMgr();
+
+  // Read boot voltage
+  boot_voltage_mv = getBattMilliVolts();
+  
+  if (config->voltage_bootlock == 0) return true;  // Protection disabled
+
+  // Skip check if externally powered
+  if (isExternalPowered()) {
+    MESH_DEBUG_PRINTLN("PWRMGT: Boot check skipped (external power)");
+    boot_voltage_mv = getBattMilliVolts();
+    return true;
+  }
+
+  MESH_DEBUG_PRINTLN("PWRMGT: Boot voltage = %u mV (threshold = %u mV)",
+      boot_voltage_mv, config->voltage_bootlock);
+
+  // Only trigger shutdown if reading is valid (>1000mV) AND below threshold
+  // This prevents spurious shutdowns on ADC glitches or uninitialized reads
+  if (boot_voltage_mv > 1000 && boot_voltage_mv < config->voltage_bootlock) {
+    MESH_DEBUG_PRINTLN("PWRMGT: Boot voltage too low - entering protective shutdown");
+
+    initiateShutdown(SHUTDOWN_REASON_BOOT_PROTECT);
+    return false;  // Should never reach this
+  }
+
+  return true;
+}
+
+void NRF52Board::initiateShutdown(uint8_t reason) {
+  enterSystemOff(reason);
+}
+
+void NRF52Board::enterSystemOff(uint8_t reason) {
+  MESH_DEBUG_PRINTLN("PWRMGT: Entering SYSTEMOFF (%s)", getShutdownReasonString(reason));
+
+  // Record shutdown reason in GPREGRET2
+  uint8_t sd_enabled = 0;
+  sd_softdevice_is_enabled(&sd_enabled);
+  if (sd_enabled) {
+    sd_power_gpregret_clr(1, 0xFF);
+    sd_power_gpregret_set(1, reason);
+  } else {
+    NRF_POWER->GPREGRET2 = reason;
+  }
+
+  // Flush serial buffers
+  Serial.flush();
+  delay(100);
+
+  // Enter SYSTEMOFF
+  if (sd_enabled) {
+    uint32_t err = sd_power_system_off();
+    if (err == NRF_ERROR_SOFTDEVICE_NOT_ENABLED) {  //SoftDevice not enabled
+      sd_enabled = 0;
+    }
+  }
+
+  if (!sd_enabled) {
+    // SoftDevice not available; write directly to POWER->SYSTEMOFF
+    NRF_POWER->SYSTEMOFF = POWER_SYSTEMOFF_SYSTEMOFF_Enter;
+  }
+
+  // If we get here, something went wrong. Reset to recover.
+  NVIC_SystemReset();
+}
+
+void NRF52Board::configureVoltageWake(uint8_t ain_channel, uint8_t refsel) {
+  // LPCOMP is not managed by SoftDevice - direct register access required
+  // Halt and disable before reconfiguration
+  NRF_LPCOMP->TASKS_STOP = 1;
+  NRF_LPCOMP->ENABLE = LPCOMP_ENABLE_ENABLE_Disabled;
+
+  // Select analog input (AIN0-7 maps to PSEL 0-7)
+  NRF_LPCOMP->PSEL = ((uint32_t)ain_channel << LPCOMP_PSEL_PSEL_Pos) & LPCOMP_PSEL_PSEL_Msk;
+
+  // Reference: REFSEL (0-6=1/8..7/8, 7=ARef, 8-15=1/16..15/16)
+  NRF_LPCOMP->REFSEL = ((uint32_t)refsel << LPCOMP_REFSEL_REFSEL_Pos) & LPCOMP_REFSEL_REFSEL_Msk;
+
+  // Detect UP events (voltage rises above threshold for battery recovery)
+  NRF_LPCOMP->ANADETECT = LPCOMP_ANADETECT_ANADETECT_Up;
+
+  // Enable 50mV hysteresis for noise immunity
+  NRF_LPCOMP->HYST = LPCOMP_HYST_HYST_Hyst50mV;
+
+  // Clear stale events/interrupts before enabling wake
+  NRF_LPCOMP->EVENTS_READY = 0;
+  NRF_LPCOMP->EVENTS_DOWN = 0;
+  NRF_LPCOMP->EVENTS_UP = 0;
+  NRF_LPCOMP->EVENTS_CROSS = 0;
+
+  NRF_LPCOMP->INTENCLR = 0xFFFFFFFF;
+  NRF_LPCOMP->INTENSET = LPCOMP_INTENSET_UP_Msk;
+
+  // Enable LPCOMP
+  NRF_LPCOMP->ENABLE = LPCOMP_ENABLE_ENABLE_Enabled;
+  NRF_LPCOMP->TASKS_START = 1;
+
+  // Wait for comparator to settle before entering SYSTEMOFF
+  for (uint8_t i = 0; i < 20 && !NRF_LPCOMP->EVENTS_READY; i++) {
+    delayMicroseconds(50);
+  }
+
+  if (refsel == 7) {
+    MESH_DEBUG_PRINTLN("PWRMGT: LPCOMP wake configured (AIN%d, ref=ARef)", ain_channel);
+  } else if (refsel <= 6) {
+    MESH_DEBUG_PRINTLN("PWRMGT: LPCOMP wake configured (AIN%d, ref=%d/8 VDD)",
+      ain_channel, refsel + 1);
+  } else {
+    uint8_t ref_num = (uint8_t)((refsel - 8) * 2 + 1);
+    MESH_DEBUG_PRINTLN("PWRMGT: LPCOMP wake configured (AIN%d, ref=%d/16 VDD)",
+      ain_channel, ref_num);
+  }
+
+  // Configure VBUS (USB power) wake alongside LPCOMP
+  uint8_t sd_enabled = 0;
+  sd_softdevice_is_enabled(&sd_enabled);
+  if (sd_enabled) {
+    sd_power_usbdetected_enable(1);
+  } else {
+    NRF_POWER->EVENTS_USBDETECTED = 0;
+    NRF_POWER->INTENSET = POWER_INTENSET_USBDETECTED_Msk;
+  }
+
+  MESH_DEBUG_PRINTLN("PWRMGT: VBUS wake configured");
+}
+#endif
+
 void NRF52BoardDCDC::begin() {
   NRF52Board::begin();
 
@@ -54,7 +271,7 @@ float NRF52Board::getMCUTemperature() {
   return temp * 0.25f; // Convert to *C
 }
 
-bool NRF52BoardOTA::startOTAUpdate(const char *id, char reply[]) {
+bool NRF52Board::startOTAUpdate(const char *id, char reply[]) {
   // Config the peripheral connection with maximum bandwidth
   // more SRAM required by SoftDevice
   // Note: All config***() function must be called before begin()
diff --git a/src/helpers/NRF52Board.h b/src/helpers/NRF52Board.h
index 0d6c0a43..1c70d8f0 100644
--- a/src/helpers/NRF52Board.h
+++ b/src/helpers/NRF52Board.h
@@ -5,15 +5,61 @@
 
 #if defined(NRF52_PLATFORM)
 
+#ifdef NRF52_POWER_MANAGEMENT
+// Shutdown Reason Codes (stored in GPREGRET before SYSTEMOFF)
+#define SHUTDOWN_REASON_NONE          0x00
+#define SHUTDOWN_REASON_LOW_VOLTAGE   0x4C  // 'L' - Runtime low voltage threshold
+#define SHUTDOWN_REASON_USER          0x55  // 'U' - User requested powerOff()
+#define SHUTDOWN_REASON_BOOT_PROTECT  0x42  // 'B' - Boot voltage protection
+
+// Boards provide this struct with their hardware-specific settings and callbacks.
+struct PowerMgtConfig {
+  // LPCOMP wake configuration (for voltage recovery from SYSTEMOFF)
+  uint8_t lpcomp_ain_channel;       // AIN0-7 for voltage sensing pin
+  uint8_t lpcomp_refsel;            // REFSEL value: 0-6=1/8..7/8, 7=ARef, 8-15=1/16..15/16
+
+  // Boot protection voltage threshold (millivolts)
+  // Set to 0 to disable boot protection
+  uint16_t voltage_bootlock;
+};
+#endif
+
 class NRF52Board : public mesh::MainBoard {
+#ifdef NRF52_POWER_MANAGEMENT
+  void initPowerMgr();
+#endif
+
 protected:
   uint8_t startup_reason;
+  char *ota_name;
+
+#ifdef NRF52_POWER_MANAGEMENT
+  uint32_t reset_reason;              // RESETREAS register value
+  uint8_t shutdown_reason;            // GPREGRET value (why we entered last SYSTEMOFF)
+  uint16_t boot_voltage_mv;           // Battery voltage at boot (millivolts)
+
+  bool checkBootVoltage(const PowerMgtConfig* config);
+  void enterSystemOff(uint8_t reason);
+  void configureVoltageWake(uint8_t ain_channel, uint8_t refsel);
+  virtual void initiateShutdown(uint8_t reason);
+#endif
 
 public:
+  NRF52Board(char *otaname) : ota_name(otaname) {}
   virtual void begin();
   virtual uint8_t getStartupReason() const override { return startup_reason; }
   virtual float getMCUTemperature() override;
   virtual void reboot() override { NVIC_SystemReset(); }
+  virtual bool startOTAUpdate(const char *id, char reply[]) override;
+
+#ifdef NRF52_POWER_MANAGEMENT
+  bool isExternalPowered() override;
+  uint16_t getBootVoltage() override { return boot_voltage_mv; }
+  virtual uint32_t getResetReason() const override { return reset_reason; }
+  uint8_t getShutdownReason() const override { return shutdown_reason; }
+  const char* getResetReasonString(uint32_t reason) override;
+  const char* getShutdownReasonString(uint8_t reason) override;
+#endif
 };
 
 /*
@@ -25,15 +71,7 @@ public:
  */
 class NRF52BoardDCDC : virtual public NRF52Board {
 public:
+  NRF52BoardDCDC() {}
   virtual void begin() override;
 };
-
-class NRF52BoardOTA : virtual public NRF52Board {
-private:
-  char *ota_name;
-
-public:
-  NRF52BoardOTA(char *name) : ota_name(name) {}
-  virtual bool startOTAUpdate(const char *id, char reply[]) override;
-};
 #endif
\ No newline at end of file
diff --git a/src/helpers/RegionMap.cpp b/src/helpers/RegionMap.cpp
index fbc5f017..2cc47e1d 100644
--- a/src/helpers/RegionMap.cpp
+++ b/src/helpers/RegionMap.cpp
@@ -2,6 +2,45 @@
 #include <helpers/TxtDataHelpers.h>
 #include <SHA256.h>
 
+// helper class for region map exporter, we emulate Stream with a safe buffer writer.
+
+class BufStream : public Stream {
+public:
+  BufStream(char *buf, size_t max_len)
+    : _buf(buf), _max_len(max_len), _pos(0) {
+    if (_max_len > 0) _buf[0] = 0;
+  }
+
+  size_t write(uint8_t c) override {
+    if (_pos + 1 >= _max_len) return 0;
+    _buf[_pos++] = c;
+    _buf[_pos] = 0;
+    return 1;
+  }
+
+  size_t write(const uint8_t *buffer, size_t size) override {
+    size_t written = 0;
+    while (written < size) {
+      if (!write(buffer[written])) break;
+      written++;
+    }
+    return written;
+  }
+
+  int available() override { return 0; }
+  int read() override { return -1; }
+  int peek() override { return -1; }
+  void flush() override {}
+
+  size_t length() const { return _pos; }
+
+private:
+  char *_buf;
+  size_t _max_len;
+  size_t _pos;
+};
+
+
 RegionMap::RegionMap(TransportKeyStore& store) : _store(&store) {
   next_id = 1; num_regions = 0; home_id = 0;
   wildcard.id = wildcard.parent = 0;
@@ -11,7 +50,11 @@ RegionMap::RegionMap(TransportKeyStore& store) : _store(&store) {
 
 bool RegionMap::is_name_char(uint8_t c) {
   // accept all alpha-num or accented characters, but exclude most punctuation chars
-  return c == '-' || c == '#' || (c >= '0' && c <= '9') || c >= 'A';
+  return c == '-' || c == '$' || c == '#' || (c >= '0' && c <= '9') || c >= 'A';
+}
+
+static const char* skip_hash(const char* name) {
+  return *name == '#' ? name + 1 : name;
 }
 
 static File openWrite(FILESYSTEM* _fs, const char* filename) {
@@ -127,11 +170,17 @@ RegionEntry* RegionMap::findMatch(mesh::Packet* packet, uint8_t mask) {
     if ((region->flags & mask) == 0) {   // does region allow this? (per 'mask' param)
       TransportKey keys[4];
       int num;
-      if (region->name[0] == '#') {   // auto hashtag region
+      if (region->name[0] == '$') {   // private region
+        num = _store->loadKeysFor(region->id, keys, 4);
+      } else if (region->name[0] == '#') {   // auto hashtag region
         _store->getAutoKeyFor(region->id, region->name, keys[0]);
         num = 1;
-      } else {
-        num = _store->loadKeysFor(region->id, keys, 4);
+      } else {   // new: implicit auto hashtag region
+        char tmp[sizeof(region->name)];
+        tmp[0] = '#';
+        strcpy(&tmp[1], region->name);
+        _store->getAutoKeyFor(region->id, tmp, keys[0]);
+        num = 1;
       }
       for (int j = 0; j < num; j++) {
         uint16_t code = keys[j].calcTransportCode(packet);
@@ -147,9 +196,10 @@ RegionEntry* RegionMap::findMatch(mesh::Packet* packet, uint8_t mask) {
 RegionEntry* RegionMap::findByName(const char* name) {
   if (strcmp(name, "*") == 0) return &wildcard;
 
+  if (*name == '#') { name++; }  // ignore the '#' when matching by name
   for (int i = 0; i < num_regions; i++) {
     auto region = &regions[i];
-    if (strcmp(name, region->name) == 0) return region;
+    if (strcmp(name, skip_hash(region->name)) == 0) return region;
   }
   return NULL;  // not found
 }
@@ -157,11 +207,12 @@ RegionEntry* RegionMap::findByName(const char* name) {
 RegionEntry* RegionMap::findByNamePrefix(const char* prefix) {
   if (strcmp(prefix, "*") == 0) return &wildcard;
 
+  if (*prefix == '#') { prefix++; }  // ignore the '#' when matching by name
   RegionEntry* partial = NULL;
   for (int i = 0; i < num_regions; i++) {
     auto region = &regions[i];
-    if (strcmp(prefix, region->name) == 0) return region;  // is a complete match, preference this one
-    if (memcmp(prefix, region->name, strlen(prefix)) == 0) {
+    if (strcmp(prefix, skip_hash(region->name)) == 0) return region;  // is a complete match, preference this one
+    if (memcmp(prefix, skip_hash(region->name), strlen(prefix)) == 0) {
       partial = region;
     }
   }
@@ -220,9 +271,9 @@ void RegionMap::printChildRegions(int indent, const RegionEntry* parent, Stream&
   }
 
   if (parent->flags & REGION_DENY_FLOOD) {
-    out.printf("%s%s\n", parent->name, parent->id == home_id ? "^" : "");
+    out.printf("%s%s\n", skip_hash(parent->name), parent->id == home_id ? "^" : "");
   } else {
-    out.printf("%s%s F\n", parent->name, parent->id == home_id ? "^" : "");
+    out.printf("%s%s F\n", skip_hash(parent->name), parent->id == home_id ? "^" : "");
   }
 
   for (int i = 0; i < num_regions; i++) {
@@ -237,24 +288,40 @@ void RegionMap::exportTo(Stream& out) const {
   printChildRegions(0, &wildcard, out);   // recursive
 }
 
-int RegionMap::exportNamesTo(char *dest, int max_len, uint8_t mask) {
+size_t RegionMap::exportTo(char *dest, size_t max_len) const {
+  if (!dest || max_len == 0) return 0;
+
+  BufStream bs(dest, max_len);
+  exportTo(bs);              // ← reuse existing logic
+  return bs.length();
+}
+
+int RegionMap::exportNamesTo(char *dest, int max_len, uint8_t mask, bool invert) {
   char *dp = dest;
-  if ((wildcard.flags & mask) == 0) {
+  
+  // Check wildcard region
+  bool wildcard_matches = invert ? (wildcard.flags & mask) : !(wildcard.flags & mask);
+  if (wildcard_matches) {
     *dp++ = '*';
     *dp++ = ',';
   }
 
-  for (int i = 0; i < num_regions; i++) {
+    for (int i = 0; i < num_regions; i++) {
     auto region = &regions[i];
-    if ((region->flags & mask) == 0) {   // region allowed? (per 'mask' param)
-      int len = strlen(region->name);
+    
+    // Check if region matches the filter criteria
+    bool region_matches = invert ? (region->flags & mask) : !(region->flags & mask);
+    
+    if (region_matches) {
+      int len = strlen(skip_hash(region->name));
       if ((dp - dest) + len + 2 < max_len) {   // only append if name will fit
-        memcpy(dp, region->name, len);
+        memcpy(dp, skip_hash(region->name), len);
         dp += len;
         *dp++ = ',';
       }
     }
   }
+
   if (dp > dest) { dp--; }   // don't include trailing comma
 
   *dp = 0;  // set null terminator
diff --git a/src/helpers/RegionMap.h b/src/helpers/RegionMap.h
index 01174d09..3ebff1ba 100644
--- a/src/helpers/RegionMap.h
+++ b/src/helpers/RegionMap.h
@@ -49,7 +49,9 @@ public:
   int getCount() const { return num_regions; }
   const RegionEntry* getByIdx(int i) const { return &regions[i]; }
   const RegionEntry* getRoot() const { return &wildcard; }
-  int exportNamesTo(char *dest, int max_len, uint8_t mask);
+  int exportNamesTo(char *dest, int max_len, uint8_t mask, bool invert = false);
 
-  void exportTo(Stream& out) const;
+  void    exportTo(Stream& out) const;
+  size_t  exportTo(char *dest, size_t max_len) const;
+ 
 };
diff --git a/src/helpers/StatsFormatHelper.h b/src/helpers/StatsFormatHelper.h
index d0107f3b..5aa01da9 100644
--- a/src/helpers/StatsFormatHelper.h
+++ b/src/helpers/StatsFormatHelper.h
@@ -42,13 +42,14 @@ public:
                                uint32_t n_recv_flood,
                                uint32_t n_recv_direct) {
     sprintf(reply, 
-      "{\"recv\":%u,\"sent\":%u,\"flood_tx\":%u,\"direct_tx\":%u,\"flood_rx\":%u,\"direct_rx\":%u}",
+      "{\"recv\":%u,\"sent\":%u,\"flood_tx\":%u,\"direct_tx\":%u,\"flood_rx\":%u,\"direct_rx\":%u,\"recv_errors\":%u}",
       driver.getPacketsRecv(),
       driver.getPacketsSent(),
       n_sent_flood,
       n_sent_direct,
       n_recv_flood,
-      n_recv_direct
+      n_recv_direct,
+      driver.getPacketsRecvErrors()
     );
   }
 };
diff --git a/src/helpers/esp32/SerialBLEInterface.cpp b/src/helpers/esp32/SerialBLEInterface.cpp
index 7ec93723..eccfeca6 100644
--- a/src/helpers/esp32/SerialBLEInterface.cpp
+++ b/src/helpers/esp32/SerialBLEInterface.cpp
@@ -9,11 +9,21 @@
 
 #define ADVERT_RESTART_DELAY  1000   // millis
 
-void SerialBLEInterface::begin(const char* device_name, uint32_t pin_code) {
+void SerialBLEInterface::begin(const char* prefix, char* name, uint32_t pin_code) {
   _pin_code = pin_code;
 
+  if (strcmp(name, "@@MAC") == 0) {
+    uint8_t addr[8];
+    memset(addr, 0, sizeof(addr));
+    esp_efuse_mac_get_default(addr);
+    sprintf(name, "%02X%02X%02X%02X%02X%02X",    // modify (IN-OUT param)
+          addr[5], addr[4], addr[3], addr[2], addr[1], addr[0]);
+  }
+  char dev_name[32+16];
+  sprintf(dev_name, "%s%s", prefix, name);
+
   // Create the BLE Device
-  BLEDevice::init(device_name);
+  BLEDevice::init(dev_name);
   BLEDevice::setSecurityCallbacks(this);
   BLEDevice::setMTU(MAX_FRAME_SIZE);
 
diff --git a/src/helpers/esp32/SerialBLEInterface.h b/src/helpers/esp32/SerialBLEInterface.h
index 29ad897a..965e90fd 100644
--- a/src/helpers/esp32/SerialBLEInterface.h
+++ b/src/helpers/esp32/SerialBLEInterface.h
@@ -61,7 +61,13 @@ public:
     send_queue_len = recv_queue_len = 0;
   }
 
-  void begin(const char* device_name, uint32_t pin_code);
+  /**
+   * init the BLE interface.
+   * @param prefix   a prefix for the device name
+   * @param name  IN/OUT - a name for the device (combined with prefix). If "@@MAC", is modified and returned
+   * @param pin_code   the BLE security pin
+   */
+  void begin(const char* prefix, char* name, uint32_t pin_code);
 
   // BaseSerialInterface methods
   void enable() override;
diff --git a/src/helpers/nrf52/SerialBLEInterface.cpp b/src/helpers/nrf52/SerialBLEInterface.cpp
index eb1e90bb..5648707e 100644
--- a/src/helpers/nrf52/SerialBLEInterface.cpp
+++ b/src/helpers/nrf52/SerialBLEInterface.cpp
@@ -123,7 +123,7 @@ void SerialBLEInterface::onBLEEvent(ble_evt_t* evt) {
   }
 }
 
-void SerialBLEInterface::begin(const char* device_name, uint32_t pin_code) {
+void SerialBLEInterface::begin(const char* prefix, char* name, uint32_t pin_code) {
   instance = this;
 
   char charpin[20];
@@ -133,7 +133,17 @@ void SerialBLEInterface::begin(const char* device_name, uint32_t pin_code) {
   // Bluefruit.autoConnLed(false);
   Bluefruit.configPrphBandwidth(BANDWIDTH_MAX);
   Bluefruit.begin();
-  
+ 
+  char dev_name[32+16];
+  if (strcmp(name, "@@MAC") == 0) {
+    ble_gap_addr_t addr;
+    if (sd_ble_gap_addr_get(&addr) == NRF_SUCCESS) {
+      sprintf(name, "%02X%02X%02X%02X%02X%02X",    // modify (IN-OUT param)
+          addr.addr[5], addr.addr[4], addr.addr[3], addr.addr[2], addr.addr[1], addr.addr[0]);
+    }
+  }
+  sprintf(dev_name, "%s%s", prefix, name);
+
   // Connection interval units: 1.25ms, supervision timeout units: 10ms
   ble_gap_conn_params_t ppcp_params;
   ppcp_params.min_conn_interval = BLE_MIN_CONN_INTERVAL;
@@ -153,7 +163,7 @@ void SerialBLEInterface::begin(const char* device_name, uint32_t pin_code) {
   }
   
   Bluefruit.setTxPower(BLE_TX_POWER);
-  Bluefruit.setName(device_name);
+  Bluefruit.setName(dev_name);
 
   Bluefruit.Security.setMITM(true);
   Bluefruit.Security.setPIN(charpin);
diff --git a/src/helpers/nrf52/SerialBLEInterface.h b/src/helpers/nrf52/SerialBLEInterface.h
index 25968d78..e2fc6cb9 100644
--- a/src/helpers/nrf52/SerialBLEInterface.h
+++ b/src/helpers/nrf52/SerialBLEInterface.h
@@ -52,7 +52,14 @@ public:
     recv_queue_len = 0;
   }
 
-  void begin(const char* device_name, uint32_t pin_code);
+  /**
+   * init the BLE interface.
+   * @param prefix   a prefix for the device name
+   * @param name  IN/OUT - a name for the device (combined with prefix). If "@@MAC", is modified and returned
+   * @param pin_code   the BLE security pin
+   */
+  void begin(const char* prefix, char* name, uint32_t pin_code);
+
   void disconnect();
   void enable() override;
   void disable() override;
diff --git a/src/helpers/radiolib/RadioLibWrappers.cpp b/src/helpers/radiolib/RadioLibWrappers.cpp
index e3407821..cf3e1266 100644
--- a/src/helpers/radiolib/RadioLibWrappers.cpp
+++ b/src/helpers/radiolib/RadioLibWrappers.cpp
@@ -105,6 +105,7 @@ int RadioLibWrapper::recvRaw(uint8_t* bytes, int sz) {
       if (err != RADIOLIB_ERR_NONE) {
         MESH_DEBUG_PRINTLN("RadioLibWrapper: error: readData(%d)", err);
         len = 0;
+        n_recv_errors++;
       } else {
       //  Serial.print("  readData() -> "); Serial.println(len);
         n_recv++;
diff --git a/src/helpers/radiolib/RadioLibWrappers.h b/src/helpers/radiolib/RadioLibWrappers.h
index 3c26d372..9ac1bbae 100644
--- a/src/helpers/radiolib/RadioLibWrappers.h
+++ b/src/helpers/radiolib/RadioLibWrappers.h
@@ -7,7 +7,7 @@ class RadioLibWrapper : public mesh::Radio {
 protected:
   PhysicalLayer* _radio;
   mesh::MainBoard* _board;
-  uint32_t n_recv, n_sent;
+  uint32_t n_recv, n_sent, n_recv_errors;
   int16_t _noise_floor, _threshold;
   uint16_t _num_floor_samples;
   int32_t _floor_sample_sum;
@@ -45,8 +45,9 @@ public:
   void loop() override;
 
   uint32_t getPacketsRecv() const { return n_recv; }
+  uint32_t getPacketsRecvErrors() const { return n_recv_errors; }
   uint32_t getPacketsSent() const { return n_sent; }
-  void resetStats() { n_recv = n_sent = 0; }
+  void resetStats() { n_recv = n_sent = n_recv_errors = 0; }
 
   virtual float getLastRSSI() const override;
   virtual float getLastSNR() const override;
diff --git a/src/helpers/sensors/EnvironmentSensorManager.cpp b/src/helpers/sensors/EnvironmentSensorManager.cpp
index b7238def..8471d80d 100644
--- a/src/helpers/sensors/EnvironmentSensorManager.cpp
+++ b/src/helpers/sensors/EnvironmentSensorManager.cpp
@@ -42,7 +42,7 @@ static Adafruit_BME280 BME280;
 #endif
 #define TELEM_BMP280_SEALEVELPRESSURE_HPA (1013.25)    // Athmospheric pressure at sea level
 #include <Adafruit_BMP280.h>
-static Adafruit_BMP280 BMP280;
+static Adafruit_BMP280 BMP280(TELEM_WIRE);
 #endif
 
 #if ENV_INCLUDE_SHTC3
@@ -58,6 +58,7 @@ static SensirionI2cSht4x SHT4X;
 
 #if ENV_INCLUDE_LPS22HB
 #include <Arduino_LPS22HB.h>
+LPS22HBClass LPS22HB(*TELEM_WIRE);
 #endif
 
 #if ENV_INCLUDE_INA3221
@@ -218,7 +219,7 @@ bool EnvironmentSensorManager::begin() {
   #endif
 
   #if ENV_INCLUDE_SHTC3
-  if (SHTC3.begin()) {
+  if (SHTC3.begin(TELEM_WIRE)) {
     MESH_DEBUG_PRINTLN("Found sensor: SHTC3");
     SHTC3_initialized = true;
   } else {
@@ -243,7 +244,7 @@ bool EnvironmentSensorManager::begin() {
   #endif
 
   #if ENV_INCLUDE_LPS22HB
-  if (BARO.begin()) {
+  if (LPS22HB.begin()) {
     MESH_DEBUG_PRINTLN("Found sensor: LPS22HB");
     LPS22HB_initialized = true;
   } else {
@@ -407,8 +408,8 @@ bool EnvironmentSensorManager::querySensors(uint8_t requester_permissions, Cayen
 
     #if ENV_INCLUDE_LPS22HB
     if (LPS22HB_initialized) {
-      telemetry.addTemperature(TELEM_CHANNEL_SELF, BARO.readTemperature());
-      telemetry.addBarometricPressure(TELEM_CHANNEL_SELF, BARO.readPressure() * 10); // convert kPa to hPa
+      telemetry.addTemperature(TELEM_CHANNEL_SELF, LPS22HB.readTemperature());
+      telemetry.addBarometricPressure(TELEM_CHANNEL_SELF, LPS22HB.readPressure() * 10); // convert kPa to hPa
     }
     #endif
 
diff --git a/src/helpers/ui/SSD1306Display.cpp b/src/helpers/ui/SSD1306Display.cpp
index c9da0cf8..4e7fd10a 100644
--- a/src/helpers/ui/SSD1306Display.cpp
+++ b/src/helpers/ui/SSD1306Display.cpp
@@ -7,6 +7,10 @@ bool SSD1306Display::i2c_probe(TwoWire& wire, uint8_t addr) {
 }
 
 bool SSD1306Display::begin() {
+  if (!_isOn) {
+    if (_peripher_power) _peripher_power->claim();
+    _isOn = true;
+  }
   #ifdef DISPLAY_ROTATION
   display.setRotation(DISPLAY_ROTATION);
   #endif
@@ -15,12 +19,18 @@ bool SSD1306Display::begin() {
 
 void SSD1306Display::turnOn() {
   display.ssd1306_command(SSD1306_DISPLAYON);
-  _isOn = true;
+  if (!_isOn) {
+    if (_peripher_power) _peripher_power->claim();
+    _isOn = true;
+  }
 }
 
 void SSD1306Display::turnOff() {
   display.ssd1306_command(SSD1306_DISPLAYOFF);
-  _isOn = false;
+  if (_isOn) {
+    if (_peripher_power) _peripher_power->release();
+    _isOn = false;
+  }
 }
 
 void SSD1306Display::clear() {
diff --git a/src/helpers/ui/SSD1306Display.h b/src/helpers/ui/SSD1306Display.h
index 1a3a9602..d843da85 100644
--- a/src/helpers/ui/SSD1306Display.h
+++ b/src/helpers/ui/SSD1306Display.h
@@ -5,6 +5,7 @@
 #include <Adafruit_GFX.h>
 #define SSD1306_NO_SPLASH
 #include <Adafruit_SSD1306.h>
+#include <helpers/RefCountedDigitalPin.h>
 
 #ifndef PIN_OLED_RESET
   #define PIN_OLED_RESET        21 // Reset pin # (or -1 if sharing Arduino reset pin)
@@ -18,10 +19,16 @@ class SSD1306Display : public DisplayDriver {
   Adafruit_SSD1306 display;
   bool _isOn;
   uint8_t _color;
+  RefCountedDigitalPin* _peripher_power;
 
   bool i2c_probe(TwoWire& wire, uint8_t addr);
 public:
-  SSD1306Display() : DisplayDriver(128, 64), display(128, 64, &Wire, PIN_OLED_RESET) { _isOn = false; }
+  SSD1306Display(RefCountedDigitalPin* peripher_power=NULL) : DisplayDriver(128, 64), 
+      display(128, 64, &Wire, PIN_OLED_RESET),
+      _peripher_power(peripher_power)
+  {
+    _isOn = false; 
+  }
   bool begin();
 
   bool isOn() override { return _isOn; }
diff --git a/src/helpers/ui/ST7789LCDDisplay.cpp b/src/helpers/ui/ST7789LCDDisplay.cpp
index 97d82f42..9fd0b23d 100644
--- a/src/helpers/ui/ST7789LCDDisplay.cpp
+++ b/src/helpers/ui/ST7789LCDDisplay.cpp
@@ -28,11 +28,14 @@ bool ST7789LCDDisplay::begin() {
       digitalWrite(PIN_TFT_LEDA_CTL, HIGH);
     }
     if (PIN_TFT_RST != -1) {
+      pinMode(PIN_TFT_RST, OUTPUT);
+      digitalWrite(PIN_TFT_RST, LOW); 
+      delay(10);
       digitalWrite(PIN_TFT_RST, HIGH);
     }
 
     // Im not sure if this is just a t-deck problem or not, if your display is slow try this.
-    #ifdef LILYGO_TDECK
+    #if defined(LILYGO_TDECK) || defined(HELTEC_LORA_V4_TFT)
       displaySPI.begin(PIN_TFT_SCL, -1, PIN_TFT_SDA, PIN_TFT_CS);
     #endif
 
diff --git a/src/helpers/ui/ST7789LCDDisplay.h b/src/helpers/ui/ST7789LCDDisplay.h
index a8077148..5b960ca1 100644
--- a/src/helpers/ui/ST7789LCDDisplay.h
+++ b/src/helpers/ui/ST7789LCDDisplay.h
@@ -8,7 +8,7 @@
 #include <helpers/RefCountedDigitalPin.h>
 
 class ST7789LCDDisplay : public DisplayDriver {
-  #ifdef LILYGO_TDECK
+  #if defined(LILYGO_TDECK) || defined(HELTEC_LORA_V4_TFT)
     SPIClass displaySPI;
   #endif
   Adafruit_ST7789 display;
@@ -25,7 +25,7 @@ public:
   {
     _isOn = false;
   }
-#elif LILYGO_TDECK
+#elif defined(LILYGO_TDECK) || defined(HELTEC_LORA_V4_TFT)
   ST7789LCDDisplay(RefCountedDigitalPin* peripher_power=NULL) : DisplayDriver(128, 64),
       displaySPI(HSPI),
       display(&displaySPI, PIN_TFT_CS, PIN_TFT_DC, PIN_TFT_RST),
diff --git a/variants/heltec_mesh_solar/MeshSolarBoard.h b/variants/heltec_mesh_solar/MeshSolarBoard.h
index 69437c87..81633625 100644
--- a/variants/heltec_mesh_solar/MeshSolarBoard.h
+++ b/variants/heltec_mesh_solar/MeshSolarBoard.h
@@ -20,9 +20,9 @@
 #define SX126X_DIO2_AS_RF_SWITCH  true
 #define SX126X_DIO3_TCXO_VOLTAGE   1.8
 
-class MeshSolarBoard : public NRF52BoardOTA {
+class MeshSolarBoard : public NRF52BoardDCDC {
 public:
-  MeshSolarBoard() : NRF52BoardOTA("MESH_SOLAR_OTA") {}
+  MeshSolarBoard() : NRF52Board("MESH_SOLAR_OTA") {}
   void begin();
 
   uint16_t getBattMilliVolts() override {
diff --git a/variants/heltec_t114/T114Board.cpp b/variants/heltec_t114/T114Board.cpp
index 4995e7de..2a36bd90 100644
--- a/variants/heltec_t114/T114Board.cpp
+++ b/variants/heltec_t114/T114Board.cpp
@@ -3,6 +3,35 @@
 #include <Arduino.h>
 #include <Wire.h>
 
+#ifdef NRF52_POWER_MANAGEMENT
+// Static configuration for power management
+// Values come from variant.h defines
+const PowerMgtConfig power_config = {
+  .lpcomp_ain_channel = PWRMGT_LPCOMP_AIN,
+  .lpcomp_refsel = PWRMGT_LPCOMP_REFSEL,
+  .voltage_bootlock = PWRMGT_VOLTAGE_BOOTLOCK
+};
+
+void T114Board::initiateShutdown(uint8_t reason) {
+#if ENV_INCLUDE_GPS == 1
+  pinMode(GPS_EN, OUTPUT);
+  digitalWrite(GPS_EN, LOW);
+#endif
+  digitalWrite(SX126X_POWER_EN, LOW);
+
+  bool enable_lpcomp = (reason == SHUTDOWN_REASON_LOW_VOLTAGE ||
+                        reason == SHUTDOWN_REASON_BOOT_PROTECT);
+  pinMode(PIN_BAT_CTL, OUTPUT);
+  digitalWrite(PIN_BAT_CTL, enable_lpcomp ? HIGH : LOW);
+
+  if (enable_lpcomp) {
+    configureVoltageWake(power_config.lpcomp_ain_channel, power_config.lpcomp_refsel);
+  }
+
+  enterSystemOff(reason);
+}
+#endif // NRF52_POWER_MANAGEMENT
+
 void T114Board::begin() {
   NRF52Board::begin();
   NRF_POWER->DCDCEN = 1;
@@ -21,6 +50,11 @@ void T114Board::begin() {
 #endif
 
   pinMode(SX126X_POWER_EN, OUTPUT);
+#ifdef NRF52_POWER_MANAGEMENT
+  // Boot voltage protection check (may not return if voltage too low)
+  // We need to call this after we configure SX126X_POWER_EN as output but before we pull high
+  checkBootVoltage(&power_config);
+#endif
   digitalWrite(SX126X_POWER_EN, HIGH);
   delay(10); // give sx1262 some time to power up
 }
\ No newline at end of file
diff --git a/variants/heltec_t114/T114Board.h b/variants/heltec_t114/T114Board.h
index 74e26455..f27dc291 100644
--- a/variants/heltec_t114/T114Board.h
+++ b/variants/heltec_t114/T114Board.h
@@ -9,9 +9,14 @@
 #define  PIN_BAT_CTL      6
 #define  MV_LSB   (3000.0F / 4096.0F) // 12-bit ADC with 3.0V input range
 
-class T114Board : public NRF52BoardOTA {
+class T114Board : public NRF52BoardDCDC {
+protected:
+#ifdef NRF52_POWER_MANAGEMENT
+  void initiateShutdown(uint8_t reason) override;
+#endif
+
 public:
-    T114Board() : NRF52BoardOTA("T114_OTA") {}
+  T114Board() : NRF52Board("T114_OTA") {}
   void begin();
 
 #if defined(P_LORA_TX_LED)
@@ -42,13 +47,13 @@ public:
   }
 
   void powerOff() override {
-    #ifdef LED_PIN
+#ifdef LED_PIN
     digitalWrite(LED_PIN, HIGH);
-    #endif
-    #if ENV_INCLUDE_GPS == 1
+#endif
+#if ENV_INCLUDE_GPS == 1
     pinMode(GPS_EN, OUTPUT);
     digitalWrite(GPS_EN, LOW);
-    #endif
+#endif
     sd_power_system_off();
   }
 };
diff --git a/variants/heltec_t114/platformio.ini b/variants/heltec_t114/platformio.ini
index 7b6f5cee..20f5e8fe 100644
--- a/variants/heltec_t114/platformio.ini
+++ b/variants/heltec_t114/platformio.ini
@@ -11,6 +11,7 @@ build_flags = ${nrf52_base.build_flags}
   -I variants/heltec_t114
   -I src/helpers/ui
   -D HELTEC_T114
+  -D NRF52_POWER_MANAGEMENT
   -D P_LORA_DIO_1=20
   -D P_LORA_NSS=24
   -D P_LORA_RESET=25
diff --git a/variants/heltec_t114/variant.h b/variants/heltec_t114/variant.h
index b3f760bb..ac9dbbe6 100644
--- a/variants/heltec_t114/variant.h
+++ b/variants/heltec_t114/variant.h
@@ -30,6 +30,14 @@
 
 #define AREF_VOLTAGE            (3.0)
 
+// Power management boot protection threshold (millivolts)
+// Set to 0 to disable boot protection
+#define PWRMGT_VOLTAGE_BOOTLOCK 3300   // Won't boot below this voltage (mV)
+// LPCOMP wake configuration (voltage recovery from SYSTEMOFF)
+// AIN2 = P0.04 = BATTERY_PIN / PIN_VBAT_READ
+#define PWRMGT_LPCOMP_AIN 2
+#define PWRMGT_LPCOMP_REFSEL 1  // 2/8 VDD (~3.68-4.04V)
+
 ////////////////////////////////////////////////////////////////////////////////
 // Number of pins
 
@@ -50,8 +58,8 @@
 ////////////////////////////////////////////////////////////////////////////////
 // I2C pin definition
 
-#define PIN_WIRE_SDA            (26)             // P0.26
-#define PIN_WIRE_SCL            (27)             // P0.27
+#define PIN_WIRE_SDA            (16)             // P0.16
+#define PIN_WIRE_SCL            (13)             // P0.13
 
 ////////////////////////////////////////////////////////////////////////////////
 // SPI pin definition
diff --git a/variants/heltec_v3/platformio.ini b/variants/heltec_v3/platformio.ini
index dcb2873c..6b61eff5 100644
--- a/variants/heltec_v3/platformio.ini
+++ b/variants/heltec_v3/platformio.ini
@@ -323,7 +323,7 @@ lib_deps =
 extends = Heltec_lora32_v3
 build_flags =
   ${Heltec_lora32_v3.build_flags}
-  -D MAX_CONTACTS=140
+  -D MAX_CONTACTS=350
   -D MAX_GROUP_CHANNELS=40
 ; NOTE: DO NOT ENABLE -->  -D MESH_PACKET_LOGGING=1
 ; NOTE: DO NOT ENABLE -->  -D MESH_DEBUG=1
diff --git a/variants/heltec_v4/HeltecV4Board.cpp b/variants/heltec_v4/HeltecV4Board.cpp
index f143db36..92f93437 100644
--- a/variants/heltec_v4/HeltecV4Board.cpp
+++ b/variants/heltec_v4/HeltecV4Board.cpp
@@ -86,5 +86,9 @@ void HeltecV4Board::begin() {
   }
 
   const char* HeltecV4Board::getManufacturerName() const {
-    return "Heltec V4";
+  #ifdef HELTEC_LORA_V4_TFT
+    return "Heltec V4 TFT";
+  #else
+    return "Heltec V4 OLED";
+  #endif
   }
diff --git a/variants/heltec_v4/platformio.ini b/variants/heltec_v4/platformio.ini
index 258a9967..cd7a2ff2 100644
--- a/variants/heltec_v4/platformio.ini
+++ b/variants/heltec_v4/platformio.ini
@@ -20,11 +20,9 @@ build_flags =
   -D P_LORA_PA_POWER=7   ; VFEM_Ctrl - Power on GC1109
   -D P_LORA_PA_EN=2      ; PA CSD - Enable GC1109
   -D P_LORA_PA_TX_EN=46  ; PA CPS - GC1109 TX PA full(High) / bypass(Low)
-  -D PIN_BOARD_SDA=17
-  -D PIN_BOARD_SCL=18
   -D PIN_USER_BTN=0
   -D PIN_VEXT_EN=36
-  -D PIN_VEXT_EN_ACTIVE=HIGH
+  -D PIN_VEXT_EN_ACTIVE=LOW
   -D LORA_TX_POWER=10 ;If it is configured as 10 here, the final output will be 22 dbm.
   -D MAX_LORA_TX_POWER=22 ; Max SX1262 output
   -D SX126X_REGISTER_PATCH=1       ; Patch register 0x8B5 for improved RX
@@ -48,10 +46,44 @@ lib_deps =
   ${esp32_base.lib_deps}
   ${sensor_base.lib_deps}
 
-[env:heltec_v4_repeater]
+[heltec_v4_oled]
 extends = Heltec_lora32_v4
 build_flags =
   ${Heltec_lora32_v4.build_flags}
+  -D HELTEC_LORA_V4_OLED
+  -D PIN_BOARD_SDA=17
+  -D PIN_BOARD_SCL=18
+  -D ENV_PIN_SDA=4
+  -D ENV_PIN_SCL=3
+build_src_filter= ${Heltec_lora32_v4.build_src_filter}
+lib_deps = ${Heltec_lora32_v4.lib_deps}
+
+[heltec_v4_tft]
+extends = Heltec_lora32_v4
+build_flags =
+  ${Heltec_lora32_v4.build_flags}
+  -D HELTEC_LORA_V4_TFT
+  -D PIN_BOARD_SDA=4
+  -D PIN_BOARD_SCL=3
+  -D DISPLAY_SCALE_X=2.5
+  -D DISPLAY_SCALE_Y=3.75
+  -D PIN_TFT_RST=18
+  -D PIN_TFT_VDD_CTL=-1
+  -D PIN_TFT_LEDA_CTL=21
+  -D PIN_TFT_LEDA_CTL_ACTIVE=HIGH
+  -D PIN_TFT_CS=15
+  -D PIN_TFT_DC=16
+  -D PIN_TFT_SCL=17
+  -D PIN_TFT_SDA=33
+build_src_filter= ${Heltec_lora32_v4.build_src_filter}
+lib_deps = 
+  ${Heltec_lora32_v4.lib_deps}
+  adafruit/Adafruit ST7735 and ST7789 Library @ ^1.11.0
+
+[env:heltec_v4_repeater]
+extends = heltec_v4_oled
+build_flags =
+  ${heltec_v4_oled.build_flags}
   -D DISPLAY_CLASS=SSD1306Display
   -D ADVERT_NAME='"Heltec Repeater"'
   -D ADVERT_LAT=0.0
@@ -60,18 +92,18 @@ build_flags =
   -D MAX_NEIGHBOURS=50
 ;  -D MESH_PACKET_LOGGING=1
 ;  -D MESH_DEBUG=1
-build_src_filter = ${Heltec_lora32_v4.build_src_filter}
+build_src_filter = ${heltec_v4_oled.build_src_filter}
   +<helpers/ui/SSD1306Display.cpp>
   +<../examples/simple_repeater>
 lib_deps =
-  ${Heltec_lora32_v4.lib_deps}
+  ${heltec_v4_oled.lib_deps}
   ${esp32_ota.lib_deps}
   bakercp/CRC32 @ ^2.0.0
 
 [env:heltec_v4_repeater_bridge_espnow]
-extends = Heltec_lora32_v4
+extends = heltec_v4_oled
 build_flags =
-  ${Heltec_lora32_v4.build_flags}
+  ${heltec_v4_oled.build_flags}
   -D DISPLAY_CLASS=SSD1306Display
   -D ADVERT_NAME='"ESPNow Bridge"'
   -D ADVERT_LAT=0.0
@@ -82,18 +114,18 @@ build_flags =
 ;  -D BRIDGE_DEBUG=1
 ;  -D MESH_PACKET_LOGGING=1
 ;  -D MESH_DEBUG=1
-build_src_filter = ${Heltec_lora32_v4.build_src_filter}
+build_src_filter = ${heltec_v4_oled.build_src_filter}
   +<helpers/bridges/ESPNowBridge.cpp>
   +<helpers/ui/SSD1306Display.cpp>
   +<../examples/simple_repeater>
 lib_deps =
-  ${Heltec_lora32_v4.lib_deps}
+  ${heltec_v4_oled.lib_deps}
   ${esp32_ota.lib_deps}
 
 [env:heltec_v4_room_server]
-extends = Heltec_lora32_v4
+extends = heltec_v4_oled
 build_flags =
-  ${Heltec_lora32_v4.build_flags}
+  ${heltec_v4_oled.build_flags}
   -D DISPLAY_CLASS=SSD1306Display
   -D ADVERT_NAME='"Heltec Room"'
   -D ADVERT_LAT=0.0
@@ -102,50 +134,50 @@ build_flags =
   -D ROOM_PASSWORD='"hello"'
 ;  -D MESH_PACKET_LOGGING=1
 ;  -D MESH_DEBUG=1
-build_src_filter = ${Heltec_lora32_v4.build_src_filter}
+build_src_filter = ${heltec_v4_oled.build_src_filter}
   +<helpers/ui/SSD1306Display.cpp>
   +<../examples/simple_room_server>
 lib_deps =
-  ${Heltec_lora32_v4.lib_deps}
+  ${heltec_v4_oled.lib_deps}
   ${esp32_ota.lib_deps}
 
 [env:heltec_v4_terminal_chat]
-extends = Heltec_lora32_v4
+extends = heltec_v4_oled
 build_flags =
-  ${Heltec_lora32_v4.build_flags}
+  ${heltec_v4_oled.build_flags}
   -D MAX_CONTACTS=350
   -D MAX_GROUP_CHANNELS=1
 ;  -D MESH_PACKET_LOGGING=1
 ;  -D MESH_DEBUG=1
-build_src_filter = ${Heltec_lora32_v4.build_src_filter}
+build_src_filter = ${heltec_v4_oled.build_src_filter}
   +<../examples/simple_secure_chat/main.cpp>
 lib_deps =
-  ${Heltec_lora32_v4.lib_deps}
+  ${heltec_v4_oled.lib_deps}
   densaugeo/base64 @ ~1.4.0
 
 [env:heltec_v4_companion_radio_usb]
-extends = Heltec_lora32_v4
+extends = heltec_v4_oled
 build_flags =
-  ${Heltec_lora32_v4.build_flags}
+  ${heltec_v4_oled.build_flags}
   -I examples/companion_radio/ui-new
   -D MAX_CONTACTS=350
   -D MAX_GROUP_CHANNELS=40
   -D DISPLAY_CLASS=SSD1306Display
 ; NOTE: DO NOT ENABLE -->  -D MESH_PACKET_LOGGING=1
 ; NOTE: DO NOT ENABLE -->  -D MESH_DEBUG=1
-build_src_filter = ${Heltec_lora32_v4.build_src_filter}
+build_src_filter = ${heltec_v4_oled.build_src_filter}
   +<helpers/ui/SSD1306Display.cpp>
   +<helpers/ui/MomentaryButton.cpp>
   +<../examples/companion_radio/*.cpp>
   +<../examples/companion_radio/ui-new/*.cpp>
 lib_deps =
-  ${Heltec_lora32_v4.lib_deps}
+  ${heltec_v4_oled.lib_deps}
   densaugeo/base64 @ ~1.4.0
 
 [env:heltec_v4_companion_radio_ble]
-extends = Heltec_lora32_v4
+extends = heltec_v4_oled
 build_flags =
-  ${Heltec_lora32_v4.build_flags}
+  ${heltec_v4_oled.build_flags}
   -I examples/companion_radio/ui-new
   -D MAX_CONTACTS=350
   -D MAX_GROUP_CHANNELS=40
@@ -156,20 +188,20 @@ build_flags =
   -D OFFLINE_QUEUE_SIZE=256
 ;  -D MESH_PACKET_LOGGING=1
 ;  -D MESH_DEBUG=1
-build_src_filter = ${Heltec_lora32_v4.build_src_filter}
+build_src_filter = ${heltec_v4_oled.build_src_filter}
   +<helpers/ui/SSD1306Display.cpp>
   +<helpers/ui/MomentaryButton.cpp>
   +<helpers/esp32/*.cpp>
   +<../examples/companion_radio/*.cpp>
   +<../examples/companion_radio/ui-new/*.cpp>
 lib_deps =
-  ${Heltec_lora32_v4.lib_deps}
+  ${heltec_v4_oled.lib_deps}
   densaugeo/base64 @ ~1.4.0
 
 [env:heltec_v4_companion_radio_wifi]
-extends = Heltec_lora32_v4
+extends = heltec_v4_oled
 build_flags =
-  ${Heltec_lora32_v4.build_flags}
+  ${heltec_v4_oled.build_flags}
   -I examples/companion_radio/ui-new
   -D MAX_CONTACTS=350
   -D MAX_GROUP_CHANNELS=40
@@ -177,24 +209,23 @@ build_flags =
   -D WIFI_DEBUG_LOGGING=1
   -D WIFI_SSID='"myssid"'
   -D WIFI_PWD='"mypwd"'
-  -D OFFLINE_QUEUE_SIZE=256
 ;  -D MESH_PACKET_LOGGING=1
 ;  -D MESH_DEBUG=1
-build_src_filter = ${Heltec_lora32_v4.build_src_filter}
+build_src_filter = ${heltec_v4_oled.build_src_filter}
   +<helpers/ui/SSD1306Display.cpp>
   +<helpers/ui/MomentaryButton.cpp>
   +<helpers/esp32/*.cpp>
   +<../examples/companion_radio/*.cpp>
   +<../examples/companion_radio/ui-new/*.cpp>
 lib_deps =
-  ${Heltec_lora32_v4.lib_deps}
+  ${heltec_v4_oled.lib_deps}
   densaugeo/base64 @ ~1.4.0
 
 [env:heltec_v4_sensor]
-extends = Heltec_lora32_v4
+extends = heltec_v4_oled
 build_flags =
-  ${Heltec_lora32_v4.build_flags}
-  -D ADVERT_NAME='"Heltec v3 Sensor"'
+  ${heltec_v4_oled.build_flags}
+  -D ADVERT_NAME='"Heltec v4 Sensor"'
   -D ADVERT_LAT=0.0
   -D ADVERT_LON=0.0
   -D ADMIN_PASSWORD='"password"'
@@ -203,9 +234,172 @@ build_flags =
   -D DISPLAY_CLASS=SSD1306Display
 ;  -D MESH_PACKET_LOGGING=1
 ;  -D MESH_DEBUG=1
-build_src_filter = ${Heltec_lora32_v4.build_src_filter}
+build_src_filter = ${heltec_v4_oled.build_src_filter}
   +<helpers/ui/SSD1306Display.cpp>
   +<../examples/simple_sensor>
 lib_deps =
-  ${Heltec_lora32_v4.lib_deps}
+  ${heltec_v4_oled.lib_deps}
+  ${esp32_ota.lib_deps}
+
+
+[env:heltec_v4_tft_repeater]
+extends = heltec_v4_tft
+build_flags =
+  ${heltec_v4_tft.build_flags}
+  -D DISPLAY_CLASS=ST7789LCDDisplay
+  -D ADVERT_NAME='"Heltec Repeater"'
+  -D ADVERT_LAT=0.0
+  -D ADVERT_LON=0.0
+  -D ADMIN_PASSWORD='"password"'
+  -D MAX_NEIGHBOURS=50
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+build_src_filter = ${heltec_v4_tft.build_src_filter}
+  +<helpers/ui/ST7789LCDDisplay.cpp>
+  +<../examples/simple_repeater>
+lib_deps =
+  ${heltec_v4_tft.lib_deps}
+  ${esp32_ota.lib_deps}
+  bakercp/CRC32 @ ^2.0.0
+
+
+[env:heltec_v4_tft_repeater_bridge_espnow]
+extends = heltec_v4_tft
+build_flags =
+  ${heltec_v4_tft.build_flags}
+  -D DISPLAY_CLASS=ST7789LCDDisplay
+  -D ADVERT_NAME='"ESPNow Bridge"'
+  -D ADVERT_LAT=0.0
+  -D ADVERT_LON=0.0
+  -D ADMIN_PASSWORD='"password"'
+  -D MAX_NEIGHBOURS=50
+  -D WITH_ESPNOW_BRIDGE=1
+;  -D BRIDGE_DEBUG=1
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+build_src_filter = ${heltec_v4_tft.build_src_filter}
+  +<helpers/bridges/ESPNowBridge.cpp>
+  +<helpers/ui/ST7789LCDDisplay.cpp>
+  +<../examples/simple_repeater>
+lib_deps =
+  ${heltec_v4_tft.lib_deps}
+  ${esp32_ota.lib_deps}
+
+[env:heltec_v4_tft_room_server]
+extends = heltec_v4_tft
+build_flags =
+  ${heltec_v4_tft.build_flags}
+  -D DISPLAY_CLASS=ST7789LCDDisplay
+  -D ADVERT_NAME='"Heltec Room"'
+  -D ADVERT_LAT=0.0
+  -D ADVERT_LON=0.0
+  -D ADMIN_PASSWORD='"password"'
+  -D ROOM_PASSWORD='"hello"'
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+build_src_filter = ${heltec_v4_tft.build_src_filter}
+  +<helpers/ui/ST7789LCDDisplay.cpp>
+  +<../examples/simple_room_server>
+lib_deps =
+  ${heltec_v4_tft.lib_deps}
+  ${esp32_ota.lib_deps}
+
+[env:heltec_v4_tft_terminal_chat]
+extends = heltec_v4_tft
+build_flags =
+  ${heltec_v4_tft.build_flags}
+  -D MAX_CONTACTS=350
+  -D MAX_GROUP_CHANNELS=1
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+build_src_filter = ${heltec_v4_tft.build_src_filter}
+  +<../examples/simple_secure_chat/main.cpp>
+lib_deps =
+  ${heltec_v4_tft.lib_deps}
+  densaugeo/base64 @ ~1.4.0
+
+[env:heltec_v4_tft_companion_radio_usb]
+extends = heltec_v4_tft
+build_flags =
+  ${heltec_v4_tft.build_flags}
+  -I examples/companion_radio/ui-new
+  -D MAX_CONTACTS=350
+  -D MAX_GROUP_CHANNELS=40
+  -D DISPLAY_CLASS=ST7789LCDDisplay
+; NOTE: DO NOT ENABLE -->  -D MESH_PACKET_LOGGING=1
+; NOTE: DO NOT ENABLE -->  -D MESH_DEBUG=1
+build_src_filter = ${heltec_v4_tft.build_src_filter}
+  +<helpers/ui/ST7789LCDDisplay.cpp>
+  +<helpers/ui/MomentaryButton.cpp>
+  +<../examples/companion_radio/*.cpp>
+  +<../examples/companion_radio/ui-new/*.cpp>
+lib_deps =
+  ${heltec_v4_tft.lib_deps}
+  densaugeo/base64 @ ~1.4.0
+
+[env:heltec_v4_tft_companion_radio_ble]
+extends = heltec_v4_tft
+build_flags =
+  ${heltec_v4_tft.build_flags}
+  -I examples/companion_radio/ui-new
+  -D DISPLAY_CLASS=ST7789LCDDisplay
+  -D MAX_CONTACTS=350
+  -D MAX_GROUP_CHANNELS=40
+  -D BLE_PIN_CODE=123456   ; dynamic, random PIN
+  -D AUTO_SHUTDOWN_MILLIVOLTS=3400
+  -D BLE_DEBUG_LOGGING=1
+  -D OFFLINE_QUEUE_SIZE=256
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+build_src_filter = ${heltec_v4_tft.build_src_filter}
+  +<helpers/ui/ST7789LCDDisplay.cpp>
+  +<helpers/ui/MomentaryButton.cpp>
+  +<helpers/esp32/*.cpp>
+  +<../examples/companion_radio/*.cpp>
+  +<../examples/companion_radio/ui-new/*.cpp>
+lib_deps =
+  ${heltec_v4_tft.lib_deps}
+  densaugeo/base64 @ ~1.4.0
+
+[env:heltec_v4_tft_companion_radio_wifi]
+extends = heltec_v4_tft
+build_flags =
+  ${heltec_v4_tft.build_flags}
+  -I examples/companion_radio/ui-new
+  -D MAX_CONTACTS=350
+  -D MAX_GROUP_CHANNELS=40
+  -D DISPLAY_CLASS=ST7789LCDDisplay
+  -D WIFI_DEBUG_LOGGING=1
+  -D WIFI_SSID='"myssid"'
+  -D WIFI_PWD='"mypwd"'
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+build_src_filter = ${heltec_v4_tft.build_src_filter}
+  +<helpers/ui/ST7789LCDDisplay.cpp>
+  +<helpers/ui/MomentaryButton.cpp>
+  +<helpers/esp32/*.cpp>
+  +<../examples/companion_radio/*.cpp>
+  +<../examples/companion_radio/ui-new/*.cpp>
+lib_deps =
+  ${heltec_v4_tft.lib_deps}
+  densaugeo/base64 @ ~1.4.0
+
+[env:heltec_v4_tft_sensor]
+extends = heltec_v4_tft
+build_flags =
+  ${heltec_v4_tft.build_flags}
+  -D ADVERT_NAME='"Heltec v4 Sensor"'
+  -D ADVERT_LAT=0.0
+  -D ADVERT_LON=0.0
+  -D ADMIN_PASSWORD='"password"'
+  -D ENV_PIN_SDA=3
+  -D ENV_PIN_SCL=4
+  -D DISPLAY_CLASS=ST7789LCDDisplay
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+build_src_filter = ${heltec_v4_tft.build_src_filter}
+  +<helpers/ui/ST7789LCDDisplay.cpp>
+  +<../examples/simple_sensor>
+lib_deps =
+  ${heltec_v4_tft.lib_deps}
   ${esp32_ota.lib_deps}
diff --git a/variants/heltec_v4/target.cpp b/variants/heltec_v4/target.cpp
index 015c3a8e..0d2bd497 100644
--- a/variants/heltec_v4/target.cpp
+++ b/variants/heltec_v4/target.cpp
@@ -24,7 +24,7 @@ AutoDiscoverRTCClock rtc_clock(fallback_clock);
 #endif
 
 #ifdef DISPLAY_CLASS
-  DISPLAY_CLASS display;
+  DISPLAY_CLASS display(&(board.periph_power));
   MomentaryButton user_btn(PIN_USER_BTN, 1000, true);
 #endif
 
diff --git a/variants/heltec_v4/target.h b/variants/heltec_v4/target.h
index a153b2af..00d2adab 100644
--- a/variants/heltec_v4/target.h
+++ b/variants/heltec_v4/target.h
@@ -9,7 +9,11 @@
 #include <helpers/SensorManager.h>
 #include <helpers/sensors/EnvironmentSensorManager.h>
 #ifdef DISPLAY_CLASS
-  #include <helpers/ui/SSD1306Display.h>
+#ifdef HELTEC_LORA_V4_OLED
+    #include <helpers/ui/SSD1306Display.h>
+#elif defined(HELTEC_LORA_V4_TFT)
+    #include <helpers/ui/ST7789LCDDisplay.h>
+#endif
   #include <helpers/ui/MomentaryButton.h>
 #endif
 
diff --git a/variants/heltec_wireless_paper/platformio.ini b/variants/heltec_wireless_paper/platformio.ini
index 9cf76153..f0bca860 100644
--- a/variants/heltec_wireless_paper/platformio.ini
+++ b/variants/heltec_wireless_paper/platformio.ini
@@ -5,7 +5,7 @@ build_flags =
   ${esp32_base.build_flags}
   -I variants/heltec_wireless_paper
   -D HELTEC_WIRELESS_PAPER
-  -D ARDUINO_USB_CDC_ON_BOOT=1      ; need for Serial
+  ;-D ARDUINO_USB_CDC_ON_BOOT=1      ; this breaks Serial
   -D P_LORA_DIO_1=14
   -D P_LORA_NSS=8
   -D P_LORA_RESET=RADIOLIB_NC
@@ -17,8 +17,8 @@ build_flags =
   -D WRAPPER_CLASS=CustomSX1262Wrapper
   -D LORA_TX_POWER=22
   -D P_LORA_TX_LED=18
-  -D PIN_BOARD_SDA=17
-  -D PIN_BOARD_SCL=18
+  ;-D PIN_BOARD_SDA=17
+  ;-D PIN_BOARD_SCL=18               ; same GPIO as P_LORA_TX_LED
   -D PIN_USER_BTN=0
   -D PIN_VEXT_EN=45
   -D PIN_VBAT_READ=20
@@ -139,4 +139,4 @@ build_src_filter = ${Heltec_Wireless_Paper_base.build_src_filter}
   +<../examples/simple_room_server>
 lib_deps =
   ${Heltec_Wireless_Paper_base.lib_deps}
-  ${esp32_ota.lib_deps}
\ No newline at end of file
+  ${esp32_ota.lib_deps}
diff --git a/variants/ikoka_handheld_nrf/IkokaNrf52Board.h b/variants/ikoka_handheld_nrf/IkokaNrf52Board.h
index acb58b3c..372dac56 100644
--- a/variants/ikoka_handheld_nrf/IkokaNrf52Board.h
+++ b/variants/ikoka_handheld_nrf/IkokaNrf52Board.h
@@ -6,9 +6,9 @@
 
 #ifdef IKOKA_NRF52
 
-class IkokaNrf52Board : public NRF52BoardOTA {
+class IkokaNrf52Board : public NRF52BoardDCDC {
 public:
-  IkokaNrf52Board() : NRF52BoardOTA("XIAO_NRF52_OTA") {}
+  IkokaNrf52Board() : NRF52Board("XIAO_NRF52_OTA") {}
   void begin();
 
 #if defined(P_LORA_TX_LED)
diff --git a/variants/ikoka_nano_nrf/IkokaNanoNRFBoard.h b/variants/ikoka_nano_nrf/IkokaNanoNRFBoard.h
index c7e96921..eb05092e 100644
--- a/variants/ikoka_nano_nrf/IkokaNanoNRFBoard.h
+++ b/variants/ikoka_nano_nrf/IkokaNanoNRFBoard.h
@@ -6,9 +6,9 @@
 
 #ifdef XIAO_NRF52
 
-class IkokaNanoNRFBoard : public NRF52BoardOTA {
+class IkokaNanoNRFBoard : public NRF52BoardDCDC {
 public:
-  IkokaNanoNRFBoard() : NRF52BoardOTA("XIAO_NRF52_OTA") {}
+  IkokaNanoNRFBoard() : NRF52Board("XIAO_NRF52_OTA") {}
   void begin();
 
 #if defined(P_LORA_TX_LED)
diff --git a/variants/ikoka_stick_nrf/IkokaStickNRFBoard.h b/variants/ikoka_stick_nrf/IkokaStickNRFBoard.h
index 00a26029..3c04930f 100644
--- a/variants/ikoka_stick_nrf/IkokaStickNRFBoard.h
+++ b/variants/ikoka_stick_nrf/IkokaStickNRFBoard.h
@@ -6,9 +6,9 @@
 
 #ifdef XIAO_NRF52
 
-class IkokaStickNRFBoard : public NRF52BoardOTA {
+class IkokaStickNRFBoard : public NRF52BoardDCDC {
 public:
-  IkokaStickNRFBoard() : NRF52BoardOTA("XIAO_NRF52_OTA") {}
+  IkokaStickNRFBoard() : NRF52Board("XIAO_NRF52_OTA") {}
   void begin();
 
 #if defined(P_LORA_TX_LED)
diff --git a/variants/ikoka_stick_nrf/platformio.ini b/variants/ikoka_stick_nrf/platformio.ini
index 4f664054..2e43b700 100644
--- a/variants/ikoka_stick_nrf/platformio.ini
+++ b/variants/ikoka_stick_nrf/platformio.ini
@@ -27,6 +27,7 @@ build_flags = ${nrf52_base.build_flags}
   -D PIN_USER_BTN=0
   -D PIN_WIRE_SCL=7
   -D PIN_WIRE_SDA=6
+  -UENV_INCLUDE_GPS
 lib_deps = ${nrf52_base.lib_deps}
   ${sensor_base.lib_deps}
 
diff --git a/variants/keepteen_lt1/KeepteenLT1Board.h b/variants/keepteen_lt1/KeepteenLT1Board.h
index a9844c90..752b27e7 100644
--- a/variants/keepteen_lt1/KeepteenLT1Board.h
+++ b/variants/keepteen_lt1/KeepteenLT1Board.h
@@ -4,12 +4,12 @@
 #include <Arduino.h>
 #include <helpers/NRF52Board.h>
 
-class KeepteenLT1Board : public NRF52BoardOTA {
+class KeepteenLT1Board : public NRF52Board {
 protected:
   uint8_t btn_prev_state;
 
 public:
-  KeepteenLT1Board() : NRF52BoardOTA("KeepteenLT1_OTA") {}
+  KeepteenLT1Board() : NRF52Board("KeepteenLT1_OTA") {}
   void begin();
 
   #define BATTERY_SAMPLES 8
diff --git a/variants/lilygo_techo/TechoBoard.h b/variants/lilygo_techo/TechoBoard.h
index c9bdc229..e560cd14 100644
--- a/variants/lilygo_techo/TechoBoard.h
+++ b/variants/lilygo_techo/TechoBoard.h
@@ -13,9 +13,9 @@
 #define PIN_VBAT_READ     (4)
 #define REAL_VBAT_MV_PER_LSB (VBAT_DIVIDER_COMP * VBAT_MV_PER_LSB)
 
-class TechoBoard : public NRF52BoardOTA {
+class TechoBoard : public NRF52BoardDCDC {
 public:
-  TechoBoard() : NRF52BoardOTA("TECHO_OTA") {}
+  TechoBoard() : NRF52Board("TECHO_OTA") {}
   void begin();
   uint16_t getBattMilliVolts() override;
 
diff --git a/variants/lilygo_techo_lite/TechoBoard.h b/variants/lilygo_techo_lite/TechoBoard.h
index 8e6974bd..fda393e7 100644
--- a/variants/lilygo_techo_lite/TechoBoard.h
+++ b/variants/lilygo_techo_lite/TechoBoard.h
@@ -13,9 +13,9 @@
 #define PIN_VBAT_READ     (4)
 #define REAL_VBAT_MV_PER_LSB (VBAT_DIVIDER_COMP * VBAT_MV_PER_LSB)
 
-class TechoBoard : public NRF52BoardOTA {
+class TechoBoard : public NRF52BoardDCDC {
 public:
-  TechoBoard() : NRF52BoardOTA("TECHO_OTA") {}
+  TechoBoard() : NRF52Board("TECHO_OTA") {}
   void begin();
   uint16_t getBattMilliVolts() override;
 
diff --git a/variants/mesh_pocket/MeshPocket.h b/variants/mesh_pocket/MeshPocket.h
index db65c99b..478bd56d 100644
--- a/variants/mesh_pocket/MeshPocket.h
+++ b/variants/mesh_pocket/MeshPocket.h
@@ -9,9 +9,9 @@
 #define  PIN_BAT_CTL      34
 #define  MV_LSB   (3000.0F / 4096.0F) // 12-bit ADC with 3.0V input range
 
-class HeltecMeshPocket : public NRF52BoardOTA {
+class HeltecMeshPocket : public NRF52BoardDCDC {
 public:
-  HeltecMeshPocket() : NRF52BoardOTA("MESH_POCKET_OTA") {}
+  HeltecMeshPocket() : NRF52Board("MESH_POCKET_OTA") {}
   void begin();
 
   uint16_t getBattMilliVolts() override {
diff --git a/variants/meshtiny/MeshtinyBoard.cpp b/variants/meshtiny/MeshtinyBoard.cpp
new file mode 100644
index 00000000..a2cdcb08
--- /dev/null
+++ b/variants/meshtiny/MeshtinyBoard.cpp
@@ -0,0 +1,44 @@
+#include "MeshtinyBoard.h"
+
+#include <Arduino.h>
+#include <Wire.h>
+#include <bluefruit.h>
+
+static BLEDfu bledfu;
+
+static void connect_callback(uint16_t conn_handle) {
+  (void)conn_handle;
+  MESH_DEBUG_PRINTLN("BLE client connected");
+}
+
+static void disconnect_callback(uint16_t conn_handle, uint8_t reason) {
+  (void)conn_handle;
+  (void)reason;
+
+  MESH_DEBUG_PRINTLN("BLE client disconnected");
+}
+
+void MeshtinyBoard::begin() {
+  NRF52BoardDCDC::begin();
+  btn_prev_state = HIGH;
+
+  pinMode(PIN_VBAT_READ, INPUT); // VBAT ADC input
+
+  // Set all button pins to INPUT_PULLUP
+  pinMode(PIN_BUTTON1, INPUT_PULLUP);
+  pinMode(PIN_BUTTON2, INPUT_PULLUP);
+  pinMode(PIN_BUTTON3, INPUT_PULLUP);
+  pinMode(PIN_BUTTON4, INPUT_PULLUP);
+
+#if defined(PIN_WIRE_SDA) && defined(PIN_WIRE_SCL)
+  Wire.setPins(PIN_WIRE_SDA, PIN_WIRE_SCL);
+#endif
+
+  Wire.begin();
+
+  pinMode(SX126X_POWER_EN, OUTPUT);
+  digitalWrite(SX126X_POWER_EN, HIGH);
+  delay(10);   // give sx1262 some time to power up
+}
+
+
diff --git a/variants/meshtiny/MeshtinyBoard.h b/variants/meshtiny/MeshtinyBoard.h
new file mode 100644
index 00000000..b69c0e41
--- /dev/null
+++ b/variants/meshtiny/MeshtinyBoard.h
@@ -0,0 +1,66 @@
+#pragma once
+
+#include <Arduino.h>
+#include <MeshCore.h>
+#include <helpers/NRF52Board.h>
+
+class MeshtinyBoard : public NRF52BoardDCDC {
+protected:
+  uint8_t btn_prev_state;
+
+public:
+  MeshtinyBoard() : NRF52Board("Meshtiny OTA") {}
+  void begin();
+
+#if defined(P_LORA_TX_LED)
+  void onBeforeTransmit() override {
+    digitalWrite(P_LORA_TX_LED, HIGH);   // turn TX LED on
+  }
+  void onAfterTransmit() override {
+    digitalWrite(P_LORA_TX_LED, LOW);   // turn TX LED off
+  }
+#endif
+
+  uint16_t getBattMilliVolts() override {
+    int adcvalue = 0;
+    analogReadResolution(12);
+    analogReference(AR_INTERNAL_3_0);
+    delay(10);
+    adcvalue = analogRead(PIN_VBAT_READ);
+    return (adcvalue * ADC_MULTIPLIER * AREF_VOLTAGE) / 4.096;
+  }
+
+  const char *getManufacturerName() const override { return "Meshtiny"; }
+
+  void reboot() override { NVIC_SystemReset(); }
+
+  void powerOff() override {
+
+#ifdef PIN_USER_BTN
+    while (digitalRead(PIN_USER_BTN) == LOW) {
+      delay(10);
+    }
+#endif
+
+#ifdef PIN_3V3_EN
+    pinMode(PIN_3V3_EN, OUTPUT);
+    digitalWrite(PIN_3V3_EN, LOW);
+#endif
+
+
+#ifdef PIN_LED1
+    digitalWrite(PIN_LED1, LOW);
+#endif
+
+#ifdef PIN_LED2
+    digitalWrite(PIN_LED2, LOW);
+#endif
+
+#ifdef PIN_USER_BTN
+    nrf_gpio_cfg_sense_input(g_ADigitalPinMap[PIN_USER_BTN], NRF_GPIO_PIN_PULLUP, NRF_GPIO_PIN_SENSE_LOW);
+#endif
+
+    sd_power_system_off();
+  }
+
+};
diff --git a/variants/meshtiny/platformio.ini b/variants/meshtiny/platformio.ini
new file mode 100644
index 00000000..14e5c60d
--- /dev/null
+++ b/variants/meshtiny/platformio.ini
@@ -0,0 +1,68 @@
+[Meshtiny]
+extends = nrf52_base
+board = meshtiny
+board_build.ldscript = boards/nrf52840_s140_v6.ld
+build_flags = ${nrf52_base.build_flags}
+  -I lib/nrf52/s140_nrf52_6.1.1_API/include
+  -I lib/nrf52/s140_nrf52_6.1.1_API/include/nrf52
+  -I variants/meshtiny
+  -D RADIO_CLASS=CustomSX1262
+  -D WRAPPER_CLASS=CustomSX1262Wrapper
+  -D LORA_TX_POWER=22
+  -D SX126X_CURRENT_LIMIT=140
+  -D SX126X_RX_BOOSTED_GAIN=1
+  -D PIN_3V3_EN=34
+  -D MESHTINY
+  -D UI_HAS_JOYSTICK
+build_src_filter = ${nrf52_base.build_src_filter}
+  +<../variants/meshtiny>
+  +<helpers/ui/SSD1306Display.cpp>
+  +<helpers/ui/buzzer.cpp>
+  +<helpers/sensors>
+lib_deps =
+  ${nrf52_base.lib_deps}
+  adafruit/Adafruit SSD1306 @ ^2.5.13
+  end2endzone/NonBlockingRTTTL@^1.3.0
+
+[env:Meshtiny_companion_radio_usb]
+extends = Meshtiny
+build_flags =
+  ${Meshtiny.build_flags}
+  -I examples/companion_radio/ui-new
+  -D MESHTINY
+  -D PIN_BUZZER=30
+  -D DISPLAY_CLASS=SSD1306Display
+  -D MAX_CONTACTS=350
+  -D MAX_GROUP_CHANNELS=40
+  -D OFFLINE_QUEUE_SIZE=256
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+build_src_filter = ${Meshtiny.build_src_filter}
+  +<../examples/companion_radio/*.cpp>
+  +<../examples/companion_radio/ui-new/*.cpp>
+lib_deps =
+  ${Meshtiny.lib_deps}
+  densaugeo/base64 @ ~1.4.0
+
+[env:Meshtiny_companion_radio_ble]
+extends = Meshtiny
+build_flags =
+  ${Meshtiny.build_flags}
+  -I examples/companion_radio/ui-new
+  -D MESHTINY
+  -D PIN_BUZZER=30
+  -D DISPLAY_CLASS=SSD1306Display
+  -D MAX_CONTACTS=350
+  -D MAX_GROUP_CHANNELS=40
+  -D BLE_PIN_CODE=123456
+  -D OFFLINE_QUEUE_SIZE=256
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+;  -D BLE_DEBUG_LOGGING=1
+build_src_filter = ${Meshtiny.build_src_filter}
+  +<helpers/nrf52/SerialBLEInterface.cpp>
+  +<../examples/companion_radio/*.cpp>
+  +<../examples/companion_radio/ui-new/*.cpp>
+lib_deps =
+  ${Meshtiny.lib_deps}
+  densaugeo/base64 @ ~1.4.0
diff --git a/variants/meshtiny/target.cpp b/variants/meshtiny/target.cpp
new file mode 100644
index 00000000..5fc60eae
--- /dev/null
+++ b/variants/meshtiny/target.cpp
@@ -0,0 +1,47 @@
+#include "target.h"
+
+#include <Arduino.h>
+#include <helpers/ArduinoHelpers.h>
+
+MeshtinyBoard board;
+
+RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, SPI);
+
+WRAPPER_CLASS radio_driver(radio, board);
+
+VolatileRTCClock fallback_clock;
+AutoDiscoverRTCClock rtc_clock(fallback_clock);
+EnvironmentSensorManager sensors = EnvironmentSensorManager();
+
+#ifdef DISPLAY_CLASS
+DISPLAY_CLASS display;
+  MomentaryButton user_btn(ENCODER_PRESS, 1000, true, true);
+  MomentaryButton joystick_left(ENCODER_LEFT, 1000, true, true);
+  MomentaryButton joystick_right(ENCODER_RIGHT, 1000, true, true);
+  MomentaryButton back_btn(PIN_SIDE_BUTTON, 1000, true, true);
+#endif
+
+bool radio_init() {
+  rtc_clock.begin(Wire);
+  return radio.std_init(&SPI);
+}
+
+uint32_t radio_get_rng_seed() {
+  return radio.random(0x7FFFFFFF);
+}
+
+void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
+  radio.setFrequency(freq);
+  radio.setSpreadingFactor(sf);
+  radio.setBandwidth(bw);
+  radio.setCodingRate(cr);
+}
+
+void radio_set_tx_power(uint8_t dbm) {
+  radio.setOutputPower(dbm);
+}
+
+mesh::LocalIdentity radio_new_identity() {
+  RadioNoiseListener rng(radio);
+  return mesh::LocalIdentity(&rng); // create new random identity
+}
diff --git a/variants/meshtiny/target.h b/variants/meshtiny/target.h
new file mode 100644
index 00000000..8ee3ee86
--- /dev/null
+++ b/variants/meshtiny/target.h
@@ -0,0 +1,33 @@
+#pragma once
+
+#define RADIOLIB_STATIC_ONLY 1
+#include <MeshtinyBoard.h>
+#include <RadioLib.h>
+#include <helpers/ArduinoHelpers.h>
+#include <helpers/AutoDiscoverRTCClock.h>
+#include <helpers/radiolib/CustomSX1262Wrapper.h>
+#include <helpers/radiolib/RadioLibWrappers.h>
+#ifdef DISPLAY_CLASS
+#include <helpers/ui/MomentaryButton.h>
+#include <helpers/ui/SSD1306Display.h>
+#endif
+#include <helpers/sensors/EnvironmentSensorManager.h>
+
+extern MeshtinyBoard board;
+extern WRAPPER_CLASS radio_driver;
+extern AutoDiscoverRTCClock rtc_clock;
+extern EnvironmentSensorManager sensors;
+
+#ifdef DISPLAY_CLASS
+extern DISPLAY_CLASS display;
+extern MomentaryButton user_btn;
+extern MomentaryButton joystick_left;
+extern MomentaryButton joystick_right;
+extern MomentaryButton back_btn;
+#endif
+
+bool radio_init();
+uint32_t radio_get_rng_seed();
+void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
+void radio_set_tx_power(uint8_t dbm);
+mesh::LocalIdentity radio_new_identity();
diff --git a/variants/meshtiny/variant.cpp b/variants/meshtiny/variant.cpp
new file mode 100644
index 00000000..7cec7dec
--- /dev/null
+++ b/variants/meshtiny/variant.cpp
@@ -0,0 +1,51 @@
+/*
+  Copyright (c) 2014-2015 Arduino LLC.  All right reserved.
+  Copyright (c) 2016 Sandeep Mistry All right reserved.
+  Copyright (c) 2018, Adafruit Industries (adafruit.com)
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+  See the GNU Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#include "variant.h"
+
+#include "nrf.h"
+#include "wiring_constants.h"
+#include "wiring_digital.h"
+
+const uint32_t g_ADigitalPinMap[] = {
+  // P0
+  0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28,
+  29, 30, 31,
+
+  // P1
+  32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47
+};
+
+void initVariant() {
+  // LED1 & LED2
+#ifdef PIN_LED1
+  pinMode(PIN_LED1, OUTPUT);
+  ledOff(PIN_LED1);
+#endif
+
+#ifdef PIN_LED2
+  pinMode(PIN_LED2, OUTPUT);
+  ledOff(PIN_LED2);
+#endif
+
+  // 3V3 Power Rail - nothing connected on meshtiny
+  pinMode(PIN_3V3_EN, OUTPUT);
+  digitalWrite(PIN_3V3_EN, LOW);
+}
diff --git a/variants/meshtiny/variant.h b/variants/meshtiny/variant.h
new file mode 100644
index 00000000..daa8eff5
--- /dev/null
+++ b/variants/meshtiny/variant.h
@@ -0,0 +1,98 @@
+#ifndef _MESHTINY_H_
+#define _MESHTINY_H_
+
+/** Master clock frequency */
+#define VARIANT_MCK                     (64000000ul)
+
+#define USE_LFXO                        // Board uses 32khz crystal for LF
+
+/*----------------------------------------------------------------------------
+ *        Headers
+ *----------------------------------------------------------------------------*/
+
+#include "WVariant.h"
+
+#define PINS_COUNT                      (48)
+#define NUM_DIGITAL_PINS                (48)
+#define NUM_ANALOG_INPUTS               (6)
+#define NUM_ANALOG_OUTPUTS              (0)
+
+// LEDs
+#define PIN_LED1                        (35) // Green LED
+#define PIN_LED2                        (36) // Blue LED
+
+#define LED_RED                         (-1)
+#define LED_GREEN                       PIN_LED1
+#define LED_BLUE                        (-1)  // Disable annoying flashing caused by Bluefruit
+
+#define P_LORA_TX_LED                   PIN_LED2 // Blue LED
+// #define PIN_STATUS_LED                  LED_GREEN  // disable status led.
+#define LED_BUILTIN                     LED_GREEN
+#define PIN_LED                         LED_BUILTIN
+#define LED_PIN                         LED_BUILTIN
+#define LED_STATE_ON                    HIGH
+
+// Buttons
+#define PIN_BUTTON1                     (9)   // side button
+#define PIN_BUTTON2                     (4)   // encoder left
+#define PIN_BUTTON3                     (26)  // encoder right
+#define PIN_BUTTON4                     (28)  // encoder press
+#define PIN_SIDE_BUTTON                 PIN_BUTTON1
+#define ENCODER_LEFT                    PIN_BUTTON2
+#define ENCODER_RIGHT                   PIN_BUTTON3
+#define ENCODER_PRESS                   PIN_BUTTON4
+#define PIN_USER_BTN                    PIN_SIDE_BUTTON
+
+// VBAT sensing
+#define PIN_VBAT_READ                   (5)
+#define BATTERY_SENSE_RESOLUTION_BITS   12
+#define BATTERY_SENSE_RESOLUTION        4096.0
+#define AREF_VOLTAGE                    3.0
+#define VBAT_AR_INTERNAL                AR_INTERNAL_3_0
+#define ADC_MULTIPLIER                  1.73
+#define ADC_RESOLUTION                  14
+
+// Serial interfaces
+#define PIN_SERIAL1_RX                  (15)
+#define PIN_SERIAL1_TX                  (16)
+#define PIN_SERIAL2_RX                  (8)     // Connected to Jlink CDC
+#define PIN_SERIAL2_TX                  (6)
+
+// SPI Interfaces
+#define SPI_INTERFACES_COUNT            2
+
+#define PIN_SPI_MISO                    (45)
+#define PIN_SPI_MOSI                    (44)
+#define PIN_SPI_SCK                     (43)
+
+#define PIN_SPI1_MISO                   (29)
+#define PIN_SPI1_MOSI                   (30)
+#define PIN_SPI1_SCK                    (3)
+
+// LoRa SX1262 module pins
+#define P_LORA_SCLK                     PIN_SPI_SCK
+#define P_LORA_MISO                     PIN_SPI_MISO
+#define P_LORA_MOSI                     PIN_SPI_MOSI
+#define P_LORA_DIO_1                    (47)
+#define P_LORA_RESET                    (38)
+#define P_LORA_BUSY                     (46)
+#define P_LORA_NSS                      (42)
+#define SX126X_POWER_EN                 (37)
+
+#define SX126X_RXEN                     RADIOLIB_NC
+#define SX126X_TXEN                     RADIOLIB_NC
+
+#define SX126X_DIO2_AS_RF_SWITCH        true
+#define SX126X_DIO3_TCXO_VOLTAGE        (1.8f)
+
+// Wire Interfaces
+#define WIRE_INTERFACES_COUNT           1
+#define PIN_WIRE_SDA                    (13)
+#define PIN_WIRE_SCL                    (14)
+#define PIN_BOARD_SDA                   (13)
+#define PIN_BOARD_SCL                   (14)
+
+// Power control
+#define PIN_3V3_EN                      (34)    // nothing connected on meshtiny board
+
+#endif // _MESHTINY_H_
diff --git a/variants/minewsemi_me25ls01/MinewsemiME25LS01Board.h b/variants/minewsemi_me25ls01/MinewsemiME25LS01Board.h
index 805f9dfa..6858a106 100644
--- a/variants/minewsemi_me25ls01/MinewsemiME25LS01Board.h
+++ b/variants/minewsemi_me25ls01/MinewsemiME25LS01Board.h
@@ -20,12 +20,12 @@
 #define  PIN_VBAT_READ BATTERY_PIN
 #define  ADC_MULTIPLIER   (1.815f) // dependent on voltage divider resistors. TODO: more accurate battery tracking
 
-class MinewsemiME25LS01Board : public NRF52BoardOTA {
+class MinewsemiME25LS01Board : public NRF52BoardDCDC {
 protected:
   uint8_t btn_prev_state;
 
 public:
-  MinewsemiME25LS01Board() : NRF52BoardOTA("Minewsemi_OTA") {}
+  MinewsemiME25LS01Board() : NRF52Board("Minewsemi_OTA") {}
   void begin();
 
 #define BATTERY_SAMPLES 8
diff --git a/variants/nano_g2_ultra/nano-g2.cpp b/variants/nano_g2_ultra/nano-g2.cpp
index 6a749aab..23695845 100644
--- a/variants/nano_g2_ultra/nano-g2.cpp
+++ b/variants/nano_g2_ultra/nano-g2.cpp
@@ -3,25 +3,8 @@
 
 #ifdef NANO_G2_ULTRA
 
-#include <bluefruit.h>
 #include <Wire.h>
 
-static BLEDfu bledfu;
-
-static void connect_callback(uint16_t conn_handle)
-{
-  (void)conn_handle;
-  MESH_DEBUG_PRINTLN("BLE client connected");
-}
-
-static void disconnect_callback(uint16_t conn_handle, uint8_t reason)
-{
-  (void)conn_handle;
-  (void)reason;
-
-  MESH_DEBUG_PRINTLN("BLE client disconnected");
-}
-
 void NanoG2Ultra::begin()
 {
   NRF52Board::begin();
@@ -56,48 +39,4 @@ uint16_t NanoG2Ultra::getBattMilliVolts()
   // divider into account (providing the actual LIPO voltage)
   return (uint16_t)((float)adcvalue * REAL_VBAT_MV_PER_LSB);
 }
-
-bool NanoG2Ultra::startOTAUpdate(const char *id, char reply[])
-{
-  // Config the peripheral connection with maximum bandwidth
-  // more SRAM required by SoftDevice
-  // Note: All config***() function must be called before begin()
-  Bluefruit.configPrphBandwidth(BANDWIDTH_MAX);
-  Bluefruit.configPrphConn(92, BLE_GAP_EVENT_LENGTH_MIN, 16, 16);
-
-  Bluefruit.begin(1, 0);
-  // Set max power. Accepted values are: -40, -30, -20, -16, -12, -8, -4, 0, 4
-  Bluefruit.setTxPower(4);
-  // Set the BLE device name
-  Bluefruit.setName("NANO_G2_OTA");
-
-  Bluefruit.Periph.setConnectCallback(connect_callback);
-  Bluefruit.Periph.setDisconnectCallback(disconnect_callback);
-
-  // To be consistent OTA DFU should be added first if it exists
-  bledfu.begin();
-
-  // Set up and start advertising
-  // Advertising packet
-  Bluefruit.Advertising.addFlags(BLE_GAP_ADV_FLAGS_LE_ONLY_GENERAL_DISC_MODE);
-  Bluefruit.Advertising.addTxPower();
-  Bluefruit.Advertising.addName();
-
-  /* Start Advertising
-    - Enable auto advertising if disconnected
-    - Interval:  fast mode = 20 ms, slow mode = 152.5 ms
-    - Timeout for fast mode is 30 seconds
-    - Start(timeout) with timeout = 0 will advertise forever (until connected)
-
-    For recommended advertising interval
-    https://developer.apple.com/library/content/qa/qa1931/_index.html
-  */
-  Bluefruit.Advertising.restartOnDisconnect(true);
-  Bluefruit.Advertising.setInterval(32, 244); // in unit of 0.625 ms
-  Bluefruit.Advertising.setFastTimeout(30);   // number of seconds in fast mode
-  Bluefruit.Advertising.start(0);             // 0 = Don't stop advertising after n seconds
-
-  strcpy(reply, "OK - started");
-  return true;
-}
 #endif
diff --git a/variants/nano_g2_ultra/nano-g2.h b/variants/nano_g2_ultra/nano-g2.h
index 6961fc86..cf771efe 100644
--- a/variants/nano_g2_ultra/nano-g2.h
+++ b/variants/nano_g2_ultra/nano-g2.h
@@ -37,9 +37,9 @@
 
 class NanoG2Ultra : public NRF52Board {
 public:
+  NanoG2Ultra() : NRF52Board("NANO_G2_OTA") {}
   void begin();
   uint16_t getBattMilliVolts() override;
-  bool startOTAUpdate(const char *id, char reply[]) override;
 
   const char *getManufacturerName() const override { return "Nano G2 Ultra"; }
 
diff --git a/variants/promicro/PromicroBoard.h b/variants/promicro/PromicroBoard.h
index c23ed1c9..7b6afb1b 100644
--- a/variants/promicro/PromicroBoard.h
+++ b/variants/promicro/PromicroBoard.h
@@ -20,13 +20,13 @@
 #define  PIN_VBAT_READ 17
 #define  ADC_MULTIPLIER   (1.815f) // dependent on voltage divider resistors. TODO: more accurate battery tracking
 
-class PromicroBoard : public NRF52BoardOTA {
+class PromicroBoard : public NRF52BoardDCDC {
 protected:
   uint8_t btn_prev_state;
   float adc_mult = ADC_MULTIPLIER;
 
 public:
-  PromicroBoard() : NRF52BoardOTA("ProMicro_OTA") {}
+  PromicroBoard() : NRF52Board("ProMicro_OTA") {}
   void begin();
 
   #define BATTERY_SAMPLES 8
diff --git a/variants/rak3112/RAK3112Board.h b/variants/rak3112/RAK3112Board.h
new file mode 100644
index 00000000..8ba3197c
--- /dev/null
+++ b/variants/rak3112/RAK3112Board.h
@@ -0,0 +1,96 @@
+#pragma once
+
+#include <Arduino.h>
+#include <helpers/RefCountedDigitalPin.h>
+#include <helpers/ESP32Board.h>
+
+// built-ins
+#ifndef PIN_VBAT_READ
+  #define  PIN_VBAT_READ    1
+#endif
+#ifndef PIN_ADC_CTRL
+  #define  PIN_ADC_CTRL         36
+#endif
+#define  PIN_ADC_CTRL_ACTIVE    LOW
+#define  PIN_ADC_CTRL_INACTIVE  HIGH
+#define  ADC_MULTIPLIER   (3 * 1.73 * 1.187 * 1000)
+#define  BATTERY_SAMPLES 8
+
+#include <driver/rtc_io.h>
+
+class RAK3112Board : public ESP32Board {
+private:
+  bool adc_active_state;
+
+public:
+  RefCountedDigitalPin periph_power;
+
+  RAK3112Board() : periph_power(PIN_VEXT_EN) { }
+
+  void begin() {
+    ESP32Board::begin();
+
+    // Auto-detect correct ADC_CTRL pin polarity (different for boards >3.2)
+    pinMode(PIN_ADC_CTRL, INPUT);
+    adc_active_state = !digitalRead(PIN_ADC_CTRL);
+
+    pinMode(PIN_ADC_CTRL, OUTPUT);
+    digitalWrite(PIN_ADC_CTRL, !adc_active_state); // Initially inactive
+
+    periph_power.begin();
+
+    esp_reset_reason_t reason = esp_reset_reason();
+    if (reason == ESP_RST_DEEPSLEEP) {
+      long wakeup_source = esp_sleep_get_ext1_wakeup_status();
+      if (wakeup_source & (1 << P_LORA_DIO_1)) {  // received a LoRa packet (while in deep sleep)
+        startup_reason = BD_STARTUP_RX_PACKET;
+      }
+
+      rtc_gpio_hold_dis((gpio_num_t)P_LORA_NSS);
+      rtc_gpio_deinit((gpio_num_t)P_LORA_DIO_1);
+    }
+  }
+
+  void enterDeepSleep(uint32_t secs, int pin_wake_btn = -1) {
+    esp_sleep_pd_config(ESP_PD_DOMAIN_RTC_PERIPH, ESP_PD_OPTION_ON);
+
+    // Make sure the DIO1 and NSS GPIOs are hold on required levels during deep sleep
+    rtc_gpio_set_direction((gpio_num_t)P_LORA_DIO_1, RTC_GPIO_MODE_INPUT_ONLY);
+    rtc_gpio_pulldown_en((gpio_num_t)P_LORA_DIO_1);
+
+    rtc_gpio_hold_en((gpio_num_t)P_LORA_NSS);
+
+    if (pin_wake_btn < 0) {
+      esp_sleep_enable_ext1_wakeup( (1L << P_LORA_DIO_1), ESP_EXT1_WAKEUP_ANY_HIGH);  // wake up on: recv LoRa packet
+    } else {
+      esp_sleep_enable_ext1_wakeup( (1L << P_LORA_DIO_1) | (1L << pin_wake_btn), ESP_EXT1_WAKEUP_ANY_HIGH);  // wake up on: recv LoRa packet OR wake btn
+    }
+
+    if (secs > 0) {
+      esp_sleep_enable_timer_wakeup(secs * 1000000);
+    }
+
+    // Finally set ESP32 into sleep
+    esp_deep_sleep_start();   // CPU halts here and never returns!
+  }
+
+  void powerOff() override {
+    enterDeepSleep(0);
+  }
+
+  uint16_t getBattMilliVolts() override {
+    analogReadResolution(12);
+
+    uint32_t raw = 0;
+    for (int i = 0; i < BATTERY_SAMPLES; i++) {
+      raw += analogRead(PIN_VBAT_READ);
+    }
+    raw = raw / BATTERY_SAMPLES;
+
+    return (ADC_MULTIPLIER * raw) / 4096;
+  }
+
+  const char* getManufacturerName() const override {
+    return "RAK 3112";
+  }
+};
diff --git a/variants/rak3112/platformio.ini b/variants/rak3112/platformio.ini
new file mode 100644
index 00000000..29ebdff2
--- /dev/null
+++ b/variants/rak3112/platformio.ini
@@ -0,0 +1,223 @@
+[rak3112]
+extends = esp32_base
+board = esp32-s3-devkitc-1
+build_flags =
+  ${esp32_base.build_flags}
+  ${sensor_base.build_flags}
+  -I variants/rak3112
+  -D RAK_3112=1
+  -D ESP32_CPU_FREQ=80
+  -D P_LORA_DIO_1=47
+  -D P_LORA_NSS=7
+  -D P_LORA_RESET=8
+  -D P_LORA_BUSY=48
+  -D P_LORA_SCLK=5
+  -D P_LORA_MISO=3
+  -D P_LORA_MOSI=6
+  -D RADIO_CLASS=CustomSX1262
+  -D WRAPPER_CLASS=CustomSX1262Wrapper
+  -D LORA_TX_POWER=22
+  -D P_LORA_TX_LED=46
+  -D PIN_BOARD_SDA=9
+  -D PIN_BOARD_SCL=40
+  -D PIN_USER_BTN=-1
+  -D PIN_VEXT_EN=14
+  -D SX126X_DIO2_AS_RF_SWITCH=true
+  -D SX126X_DIO3_TCXO_VOLTAGE=1.8
+  -D SX126X_CURRENT_LIMIT=140
+  -D SX126X_RX_BOOSTED_GAIN=1
+  -D PIN_GPS_RX=43
+  -D PIN_GPS_TX=44
+;  -D PIN_GPS_EN=26
+build_src_filter = ${esp32_base.build_src_filter}
+  +<../variants/rak3112>
+  +<helpers/sensors>
+lib_deps =
+  ${esp32_base.lib_deps}
+  ${sensor_base.lib_deps}
+
+[env:RAK3112_repeater]
+extends = rak3112
+build_flags =
+  ${rak3112.build_flags}
+  -D DISPLAY_CLASS=SSD1306Display
+  -D ADVERT_NAME='"RAK3112 Repeater"'
+  -D ADVERT_LAT=0.0
+  -D ADVERT_LON=0.0
+  -D ADMIN_PASSWORD='"password"'
+  -D MAX_NEIGHBOURS=50
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+build_src_filter = ${rak3112.build_src_filter}
+  +<helpers/ui/SSD1306Display.cpp>
+  +<../examples/simple_repeater>
+lib_deps =
+  ${rak3112.lib_deps}
+  ${esp32_ota.lib_deps}
+  bakercp/CRC32 @ ^2.0.0
+
+[env:RAK3112_repeater_bridge_rs232]
+extends = rak3112
+build_flags =
+  ${rak3112.build_flags}
+  -D DISPLAY_CLASS=SSD1306Display
+  -D ADVERT_NAME='"RS232 Bridge"'
+  -D ADVERT_LAT=0.0
+  -D ADVERT_LON=0.0
+  -D ADMIN_PASSWORD='"password"'
+  -D MAX_NEIGHBOURS=50
+  -D WITH_RS232_BRIDGE=Serial2
+  -D WITH_RS232_BRIDGE_RX=5
+  -D WITH_RS232_BRIDGE_TX=6
+;  -D BRIDGE_DEBUG=1
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+build_src_filter = ${rak3112.build_src_filter}
+  +<helpers/bridges/RS232Bridge.cpp>
+  +<helpers/ui/SSD1306Display.cpp>
+  +<../examples/simple_repeater>
+lib_deps =
+  ${rak3112.lib_deps}
+  ${esp32_ota.lib_deps}
+
+[env:RAK3112_repeater_bridge_espnow]
+extends = rak3112
+build_flags =
+  ${rak3112.build_flags}
+  -D DISPLAY_CLASS=SSD1306Display
+  -D ADVERT_NAME='"ESPNow Bridge"'
+  -D ADVERT_LAT=0.0
+  -D ADVERT_LON=0.0
+  -D ADMIN_PASSWORD='"password"'
+  -D MAX_NEIGHBOURS=50
+  -D WITH_ESPNOW_BRIDGE=1
+;  -D BRIDGE_DEBUG=1
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+build_src_filter = ${rak3112.build_src_filter}
+  +<helpers/bridges/ESPNowBridge.cpp>
+  +<helpers/ui/SSD1306Display.cpp>
+  +<../examples/simple_repeater>
+lib_deps =
+  ${rak3112.lib_deps}
+  ${esp32_ota.lib_deps}
+
+[env:RAK3112_room_server]
+extends = rak3112
+build_flags =
+  ${rak3112.build_flags}
+  -D DISPLAY_CLASS=SSD1306Display
+  -D ADVERT_NAME='"RAK3112 Room"'
+  -D ADVERT_LAT=0.0
+  -D ADVERT_LON=0.0
+  -D ADMIN_PASSWORD='"password"'
+  -D ROOM_PASSWORD='"hello"'
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+build_src_filter = ${rak3112.build_src_filter}
+  +<helpers/ui/SSD1306Display.cpp>
+  +<../examples/simple_room_server>
+lib_deps =
+  ${rak3112.lib_deps}
+  ${esp32_ota.lib_deps}
+
+[env:RAK3112_terminal_chat]
+extends = rak3112
+build_flags =
+  ${rak3112.build_flags}
+  -D MAX_CONTACTS=350
+  -D MAX_GROUP_CHANNELS=1
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+build_src_filter = ${rak3112.build_src_filter}
+  +<../examples/simple_secure_chat/main.cpp>
+lib_deps =
+  ${rak3112.lib_deps}
+  densaugeo/base64 @ ~1.4.0
+
+[env:RAK3112_companion_radio_usb]
+extends = rak3112
+build_flags =
+  ${rak3112.build_flags}
+  -I examples/companion_radio/ui-new
+  -D MAX_CONTACTS=350
+  -D MAX_GROUP_CHANNELS=40
+  -D DISPLAY_CLASS=SSD1306Display
+; NOTE: DO NOT ENABLE -->  -D MESH_PACKET_LOGGING=1
+; NOTE: DO NOT ENABLE -->  -D MESH_DEBUG=1
+build_src_filter = ${rak3112.build_src_filter}
+  +<helpers/ui/SSD1306Display.cpp>
+  +<helpers/ui/MomentaryButton.cpp>
+  +<../examples/companion_radio/*.cpp>
+  +<../examples/companion_radio/ui-new/*.cpp>
+lib_deps =
+  ${rak3112.lib_deps}
+  densaugeo/base64 @ ~1.4.0
+
+[env:RAK3112_companion_radio_ble]
+extends = rak3112
+build_flags =
+  ${rak3112.build_flags}
+  -I examples/companion_radio/ui-new
+  -D MAX_CONTACTS=350
+  -D MAX_GROUP_CHANNELS=40
+  -D DISPLAY_CLASS=SSD1306Display
+  -D BLE_PIN_CODE=123456   ; dynamic, random PIN
+  -D AUTO_SHUTDOWN_MILLIVOLTS=3400
+  -D BLE_DEBUG_LOGGING=1
+  -D OFFLINE_QUEUE_SIZE=256
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+build_src_filter = ${rak3112.build_src_filter}
+  +<helpers/ui/SSD1306Display.cpp>
+  +<helpers/ui/MomentaryButton.cpp>
+  +<helpers/esp32/*.cpp>
+  +<../examples/companion_radio/*.cpp>
+  +<../examples/companion_radio/ui-new/*.cpp>
+lib_deps =
+  ${rak3112.lib_deps}
+  densaugeo/base64 @ ~1.4.0
+
+[env:RAK3112_companion_radio_wifi]
+extends = rak3112
+build_flags =
+  ${rak3112.build_flags}
+  -I examples/companion_radio/ui-new
+  -D MAX_CONTACTS=350
+  -D MAX_GROUP_CHANNELS=40
+  -D DISPLAY_CLASS=SSD1306Display
+  -D WIFI_DEBUG_LOGGING=1
+  -D WIFI_SSID='"myssid"'
+  -D WIFI_PWD='"mypwd"'
+  -D OFFLINE_QUEUE_SIZE=256
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+build_src_filter = ${rak3112.build_src_filter}
+  +<helpers/ui/SSD1306Display.cpp>
+  +<helpers/ui/MomentaryButton.cpp>
+  +<helpers/esp32/*.cpp>
+  +<../examples/companion_radio/*.cpp>
+  +<../examples/companion_radio/ui-new/*.cpp>
+lib_deps =
+  ${rak3112.lib_deps}
+  densaugeo/base64 @ ~1.4.0
+
+[env:RAK3112_sensor]
+extends = rak3112
+build_flags =
+  ${rak3112.build_flags}
+  -D ADVERT_NAME='"RAK3112 v3 Sensor"'
+  -D ADVERT_LAT=0.0
+  -D ADVERT_LON=0.0
+  -D ADMIN_PASSWORD='"password"'
+  -D ENV_PIN_SDA=33
+  -D ENV_PIN_SCL=34
+  -D DISPLAY_CLASS=SSD1306Display
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+build_src_filter = ${rak3112.build_src_filter}
+  +<helpers/ui/SSD1306Display.cpp>
+  +<../examples/simple_sensor>
+lib_deps =
+  ${rak3112.lib_deps}
+  ${esp32_ota.lib_deps}
diff --git a/variants/rak3112/target.cpp b/variants/rak3112/target.cpp
new file mode 100644
index 00000000..634573b8
--- /dev/null
+++ b/variants/rak3112/target.cpp
@@ -0,0 +1,60 @@
+#include <Arduino.h>
+#include "target.h"
+
+RAK3112Board board;
+
+#if defined(P_LORA_SCLK)
+  static SPIClass spi;
+  RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, spi);
+#else
+  RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY);
+#endif
+
+WRAPPER_CLASS radio_driver(radio, board);
+
+ESP32RTCClock fallback_clock;
+AutoDiscoverRTCClock rtc_clock(fallback_clock);
+
+#if ENV_INCLUDE_GPS
+  #include <helpers/sensors/MicroNMEALocationProvider.h>
+  MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1);
+  EnvironmentSensorManager sensors = EnvironmentSensorManager(nmea);
+#else
+  EnvironmentSensorManager sensors;
+#endif
+
+#ifdef DISPLAY_CLASS
+  DISPLAY_CLASS display;
+  MomentaryButton user_btn(PIN_USER_BTN, 1000, true);
+#endif
+
+bool radio_init() {
+  fallback_clock.begin();
+  rtc_clock.begin(Wire);
+
+#if defined(P_LORA_SCLK)
+  return radio.std_init(&spi);
+#else
+  return radio.std_init();
+#endif
+}
+
+uint32_t radio_get_rng_seed() {
+  return radio.random(0x7FFFFFFF);
+}
+
+void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
+  radio.setFrequency(freq);
+  radio.setSpreadingFactor(sf);
+  radio.setBandwidth(bw);
+  radio.setCodingRate(cr);
+}
+
+void radio_set_tx_power(uint8_t dbm) {
+  radio.setOutputPower(dbm);
+}
+
+mesh::LocalIdentity radio_new_identity() {
+  RadioNoiseListener rng(radio);
+  return mesh::LocalIdentity(&rng);  // create new random identity
+}
diff --git a/variants/rak3112/target.h b/variants/rak3112/target.h
new file mode 100644
index 00000000..eae90900
--- /dev/null
+++ b/variants/rak3112/target.h
@@ -0,0 +1,30 @@
+#pragma once
+
+#define RADIOLIB_STATIC_ONLY 1
+#include <RadioLib.h>
+#include <helpers/radiolib/RadioLibWrappers.h>
+#include <RAK3112Board.h>
+#include <helpers/radiolib/CustomSX1262Wrapper.h>
+#include <helpers/AutoDiscoverRTCClock.h>
+#include <helpers/SensorManager.h>
+#include <helpers/sensors/EnvironmentSensorManager.h>
+#ifdef DISPLAY_CLASS
+  #include <helpers/ui/SSD1306Display.h>
+  #include <helpers/ui/MomentaryButton.h>
+#endif
+
+extern RAK3112Board board;
+extern WRAPPER_CLASS radio_driver;
+extern AutoDiscoverRTCClock rtc_clock;
+extern EnvironmentSensorManager sensors;
+
+#ifdef DISPLAY_CLASS
+  extern DISPLAY_CLASS display;
+  extern MomentaryButton user_btn;
+#endif
+
+bool radio_init();
+uint32_t radio_get_rng_seed();
+void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
+void radio_set_tx_power(uint8_t dbm);
+mesh::LocalIdentity radio_new_identity();
diff --git a/variants/rak3401/RAK3401Board.cpp b/variants/rak3401/RAK3401Board.cpp
new file mode 100644
index 00000000..b9431c92
--- /dev/null
+++ b/variants/rak3401/RAK3401Board.cpp
@@ -0,0 +1,32 @@
+#include <Arduino.h>
+#include <Wire.h>
+
+#include "RAK3401Board.h"
+
+void RAK3401Board::begin() {
+  NRF52BoardDCDC::begin();
+  pinMode(PIN_VBAT_READ, INPUT);
+#ifdef PIN_USER_BTN
+  pinMode(PIN_USER_BTN, INPUT_PULLUP);
+#endif
+
+#ifdef PIN_USER_BTN_ANA
+  pinMode(PIN_USER_BTN_ANA, INPUT_PULLUP);
+#endif
+
+#if defined(PIN_BOARD_SDA) && defined(PIN_BOARD_SCL)
+  Wire.setPins(PIN_BOARD_SDA, PIN_BOARD_SCL);
+#endif
+
+  Wire.begin();
+
+  pinMode(PIN_3V3_EN, OUTPUT);
+  digitalWrite(PIN_3V3_EN, HIGH);
+
+#ifdef P_LORA_PA_EN
+  // Initialize RAK13302 1W LoRa transceiver module PA control pin
+  pinMode(P_LORA_PA_EN, OUTPUT);
+  digitalWrite(P_LORA_PA_EN, LOW);  // Start with PA disabled
+  delay(10);  // Allow PA module to initialize
+#endif
+}
\ No newline at end of file
diff --git a/variants/rak3401/RAK3401Board.h b/variants/rak3401/RAK3401Board.h
new file mode 100644
index 00000000..20edf906
--- /dev/null
+++ b/variants/rak3401/RAK3401Board.h
@@ -0,0 +1,50 @@
+#pragma once
+
+#include <MeshCore.h>
+#include <Arduino.h>
+#include <helpers/NRF52Board.h>
+
+// built-ins
+#define  PIN_VBAT_READ    5
+#define  ADC_MULTIPLIER   (3 * 1.73 * 1.187 * 1000)
+
+#define PIN_3V3_EN (34)
+#define WB_IO2 PIN_3V3_EN
+
+class RAK3401Board : public NRF52BoardDCDC {
+protected:
+#ifdef NRF52_POWER_MANAGEMENT
+  void initiateShutdown(uint8_t reason) override;
+#endif
+public:
+  RAK3401Board() : NRF52Board("RAK3401_OTA") {}
+  void begin();
+
+  #define BATTERY_SAMPLES 8
+
+  uint16_t getBattMilliVolts() override {
+    analogReadResolution(12);
+
+    uint32_t raw = 0;
+    for (int i = 0; i < BATTERY_SAMPLES; i++) {
+      raw += analogRead(PIN_VBAT_READ);
+    }
+    raw = raw / BATTERY_SAMPLES;
+
+    return (ADC_MULTIPLIER * raw) / 4096;
+  }
+
+  const char* getManufacturerName() const override {
+    return "RAK 3401";
+  }
+
+#ifdef P_LORA_PA_EN
+  void onBeforeTransmit() override {
+    digitalWrite(P_LORA_PA_EN, HIGH);  // Enable PA before transmission
+  }
+
+  void onAfterTransmit() override {
+    digitalWrite(P_LORA_PA_EN, LOW);   // Disable PA after transmission to save power
+  }
+#endif
+};
diff --git a/variants/rak3401/platformio.ini b/variants/rak3401/platformio.ini
new file mode 100644
index 00000000..30d35d0b
--- /dev/null
+++ b/variants/rak3401/platformio.ini
@@ -0,0 +1,127 @@
+[rak3401]
+extends = nrf52_base
+board = rak3401
+board_check = true
+build_flags = ${nrf52_base.build_flags}
+  ${sensor_base.build_flags}
+  -I variants/rak3401
+  -D RAK_3401
+  -D RAK13302
+  -D RADIO_CLASS=CustomSX1262
+  -D WRAPPER_CLASS=CustomSX1262Wrapper
+  -D LORA_TX_POWER=22
+  -D SX126X_CURRENT_LIMIT=140
+  -D SX126X_RX_BOOSTED_GAIN=1
+build_src_filter = ${nrf52_base.build_src_filter}
+  +<../variants/rak3401>
+  +<helpers/sensors>
+  +<helpers/ui/SSD1306Display.cpp>
+  +<helpers/ui/MomentaryButton.cpp>
+lib_deps =
+  ${nrf52_base.lib_deps}
+  ${sensor_base.lib_deps}
+  adafruit/Adafruit SSD1306 @ ^2.5.13
+  sparkfun/SparkFun u-blox GNSS Arduino Library@^2.2.27
+
+[env:RAK_3401_repeater]
+extends = rak3401
+build_flags =
+  ${rak3401.build_flags}
+  -D DISPLAY_CLASS=SSD1306Display
+  -D ADVERT_NAME='"RAK3401 1W Repeater"'
+  -D ADVERT_LAT=0.0
+  -D ADVERT_LON=0.0
+  -D ADMIN_PASSWORD='"password"'
+  -D MAX_NEIGHBOURS=50
+  ;-D MESH_PACKET_LOGGING=1
+  ;-D MESH_DEBUG=1
+build_src_filter = ${rak3401.build_src_filter}
+  +<helpers/ui/SSD1306Display.cpp>
+  +<../examples/simple_repeater>
+
+[env:RAK_3401_room_server]
+extends = rak3401
+build_flags =
+  ${rak3401.build_flags}
+  -D DISPLAY_CLASS=SSD1306Display
+  -D ADVERT_NAME='"Test Room"'
+  -D ADVERT_LAT=0.0
+  -D ADVERT_LON=0.0
+  -D ADMIN_PASSWORD='"password"'
+  -D ROOM_PASSWORD='"hello"'
+  ;-D MESH_PACKET_LOGGING=1
+  ;-D MESH_DEBUG=1
+build_src_filter = ${rak3401.build_src_filter}
+  +<helpers/ui/SSD1306Display.cpp>
+  +<../examples/simple_room_server>
+
+[env:RAK_3401_companion_radio_usb]
+extends = rak3401
+board_build.ldscript = boards/nrf52840_s140_v6_extrafs.ld
+board_upload.maximum_size = 712704
+build_flags =
+  ${rak3401.build_flags}
+  -I examples/companion_radio/ui-new
+  -D DISPLAY_CLASS=SSD1306Display
+  -D MAX_CONTACTS=350
+  -D MAX_GROUP_CHANNELS=40
+; NOTE: DO NOT ENABLE -->  -D MESH_PACKET_LOGGING=1
+; NOTE: DO NOT ENABLE -->  -D MESH_DEBUG=1
+build_src_filter = ${rak3401.build_src_filter}
+  +<../examples/companion_radio/*.cpp>
+  +<../examples/companion_radio/ui-new/*.cpp>
+lib_deps =
+  ${rak3401.lib_deps}
+  densaugeo/base64 @ ~1.4.0
+
+[env:RAK_3401_companion_radio_ble]
+extends = rak3401
+board_build.ldscript = boards/nrf52840_s140_v6_extrafs.ld
+board_upload.maximum_size = 712704
+build_flags =
+  ${rak3401.build_flags}
+  -I examples/companion_radio/ui-new
+  -D DISPLAY_CLASS=SSD1306Display
+  -D MAX_CONTACTS=350
+  -D MAX_GROUP_CHANNELS=40
+  -D BLE_PIN_CODE=123456
+  -D BLE_DEBUG_LOGGING=1
+  -D OFFLINE_QUEUE_SIZE=256
+  ;-D MESH_PACKET_LOGGING=1
+  ;-D MESH_DEBUG=1
+build_src_filter = ${rak3401.build_src_filter}
+  +<helpers/nrf52/SerialBLEInterface.cpp>
+  +<../examples/companion_radio/*.cpp>
+  +<../examples/companion_radio/ui-new/*.cpp>
+lib_deps =
+  ${rak3401.lib_deps}
+  densaugeo/base64 @ ~1.4.0
+
+[env:RAK_3401_terminal_chat]
+extends = rak3401
+build_flags =
+  ${rak3401.build_flags}
+  -D MAX_CONTACTS=100
+  -D MAX_GROUP_CHANNELS=1
+  ;-D MESH_PACKET_LOGGING=1
+  ;-D MESH_DEBUG=1
+build_src_filter = ${rak3401.build_src_filter}
+  +<../examples/simple_secure_chat/main.cpp>
+lib_deps =
+  ${rak3401.lib_deps}
+  densaugeo/base64 @ ~1.4.0
+
+[env:RAK_3401_sensor]
+extends = rak3401
+build_flags =
+  ${rak3401.build_flags}
+  -D DISPLAY_CLASS=SSD1306Display
+  -D ADVERT_NAME='"RAK3401 Sensor"'
+  -D ADVERT_LAT=0.0
+  -D ADVERT_LON=0.0
+  -D ADMIN_PASSWORD='"password"'
+  ;-D MESH_PACKET_LOGGING=1
+  ;-D MESH_DEBUG=1
+build_src_filter = ${rak3401.build_src_filter}
+  +<helpers/ui/SSD1306Display.cpp>
+  +<../examples/simple_sensor>
\ No newline at end of file
diff --git a/variants/rak3401/target.cpp b/variants/rak3401/target.cpp
new file mode 100644
index 00000000..52f3a3d5
--- /dev/null
+++ b/variants/rak3401/target.cpp
@@ -0,0 +1,58 @@
+#include <Arduino.h>
+#include "target.h"
+#include <helpers/ArduinoHelpers.h>
+
+RAK3401Board board;
+
+#ifndef PIN_USER_BTN
+  #define PIN_USER_BTN (-1)
+#endif
+
+#ifdef DISPLAY_CLASS
+  DISPLAY_CLASS display;
+  MomentaryButton user_btn(PIN_USER_BTN, 1000, true, true);
+
+  #if defined(PIN_USER_BTN_ANA)
+  MomentaryButton analog_btn(PIN_USER_BTN_ANA, 1000, 20);
+  #endif
+#endif
+
+RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, SPI);
+
+WRAPPER_CLASS radio_driver(radio, board);
+
+VolatileRTCClock fallback_clock;
+AutoDiscoverRTCClock rtc_clock(fallback_clock);
+
+#if ENV_INCLUDE_GPS
+  #include <helpers/sensors/MicroNMEALocationProvider.h>
+  MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1);
+  EnvironmentSensorManager sensors = EnvironmentSensorManager(nmea);
+#else
+  EnvironmentSensorManager sensors;
+#endif
+
+bool radio_init() {
+  rtc_clock.begin(Wire);
+  return radio.std_init(&SPI);
+}
+
+uint32_t radio_get_rng_seed() {
+  return radio.random(0x7FFFFFFF);
+}
+
+void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
+  radio.setFrequency(freq);
+  radio.setSpreadingFactor(sf);
+  radio.setBandwidth(bw);
+  radio.setCodingRate(cr);
+}
+
+void radio_set_tx_power(uint8_t dbm) {
+  radio.setOutputPower(dbm);
+}
+
+mesh::LocalIdentity radio_new_identity() {
+  RadioNoiseListener rng(radio);
+  return mesh::LocalIdentity(&rng);  // create new random identity
+}
diff --git a/variants/rak3401/target.h b/variants/rak3401/target.h
new file mode 100644
index 00000000..32f17cd1
--- /dev/null
+++ b/variants/rak3401/target.h
@@ -0,0 +1,30 @@
+#pragma once
+
+#define RADIOLIB_STATIC_ONLY 1
+#include <RadioLib.h>
+#include <helpers/radiolib/RadioLibWrappers.h>
+#include <RAK3401Board.h>
+#include <helpers/radiolib/CustomSX1262Wrapper.h>
+#include <helpers/AutoDiscoverRTCClock.h>
+#include <helpers/sensors/EnvironmentSensorManager.h>
+
+#ifdef DISPLAY_CLASS
+  #include <helpers/ui/SSD1306Display.h>
+  extern DISPLAY_CLASS display;
+  #include <helpers/ui/MomentaryButton.h>
+  extern MomentaryButton user_btn;
+  #if defined(PIN_USER_BTN_ANA)
+  extern MomentaryButton analog_btn;
+  #endif
+#endif
+
+extern RAK3401Board board;
+extern WRAPPER_CLASS radio_driver;
+extern AutoDiscoverRTCClock rtc_clock;
+extern EnvironmentSensorManager sensors;
+
+bool radio_init();
+uint32_t radio_get_rng_seed();
+void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
+void radio_set_tx_power(uint8_t dbm);
+mesh::LocalIdentity radio_new_identity();
diff --git a/variants/rak3401/variant.cpp b/variants/rak3401/variant.cpp
new file mode 100644
index 00000000..d562189f
--- /dev/null
+++ b/variants/rak3401/variant.cpp
@@ -0,0 +1,52 @@
+/*
+  Copyright (c) 2014-2015 Arduino LLC.  All right reserved.
+  Copyright (c) 2016 Sandeep Mistry All right reserved.
+  Copyright (c) 2018, Adafruit Industries (adafruit.com)
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+  See the GNU Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#include "variant.h"
+#include "wiring_constants.h"
+#include "wiring_digital.h"
+#include "nrf.h"
+
+const uint32_t g_ADigitalPinMap[] =
+{
+  // P0
+  0 , 1 , 2 , 3 , 4 , 5 , 6 , 7 ,
+  8 , 9 , 10, 11, 12, 13, 14, 15,
+  16, 17, 18, 19, 20, 21, 22, 23,
+  24, 25, 26, 27, 28, 29, 30, 31,
+
+  // P1
+  32, 33, 34, 35, 36, 37, 38, 39,
+  40, 41, 42, 43, 44, 45, 46, 47
+};
+
+
+void initVariant()
+{
+  // LED1 & LED2
+  pinMode(PIN_LED1, OUTPUT);
+  ledOff(PIN_LED1);
+
+  pinMode(PIN_LED2, OUTPUT);
+  ledOff(PIN_LED2);
+
+  // 3V3 Power Rail
+  pinMode(PIN_3V3_EN, OUTPUT);
+  digitalWrite(PIN_3V3_EN, HIGH);
+}
diff --git a/variants/rak3401/variant.h b/variants/rak3401/variant.h
new file mode 100644
index 00000000..56fe0816
--- /dev/null
+++ b/variants/rak3401/variant.h
@@ -0,0 +1,207 @@
+/*
+  Copyright (c) 2014-2015 Arduino LLC.  All right reserved.
+  Copyright (c) 2016 Sandeep Mistry All right reserved.
+  Copyright (c) 2018, Adafruit Industries (adafruit.com)
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+  See the GNU Lesser General Public License for more details.
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#ifndef _VARIANT_RAK3401_
+#define _VARIANT_RAK3401_
+
+#define RAK4630
+
+/** Master clock frequency */
+#define VARIANT_MCK (64000000ul)
+
+#define USE_LFXO // Board uses 32khz crystal for LF
+// define USE_LFRC    // Board uses RC for LF
+
+/*----------------------------------------------------------------------------
+ *        Headers
+ *----------------------------------------------------------------------------*/
+
+#include "WVariant.h"
+
+#ifdef __cplusplus
+extern "C"
+{
+#endif // __cplusplus
+
+// Number of pins defined in PinDescription array
+#define PINS_COUNT (48)
+#define NUM_DIGITAL_PINS (48)
+#define NUM_ANALOG_INPUTS (6)
+#define NUM_ANALOG_OUTPUTS (0)
+
+// LEDs
+#define PIN_LED1 (35)
+#define PIN_LED2 (36)
+
+#define LED_BUILTIN PIN_LED1
+#define LED_CONN PIN_LED2
+
+#define LED_GREEN PIN_LED1
+#define LED_BLUE PIN_LED2
+
+#define LED_STATE_ON 1 // State when LED is litted
+
+/*
+ * Analog pins
+ */
+#define PIN_A0 (5)	//(3)
+#define PIN_A1 (31) //(4)
+#define PIN_A2 (28)
+#define PIN_A3 (29)
+#define PIN_A4 (30)
+#define PIN_A5 (31)
+#define PIN_A6 (0xff)
+#define PIN_A7 (0xff)
+
+	static const uint8_t A0 = PIN_A0;
+	static const uint8_t A1 = PIN_A1;
+	static const uint8_t A2 = PIN_A2;
+	static const uint8_t A3 = PIN_A3;
+	static const uint8_t A4 = PIN_A4;
+	static const uint8_t A5 = PIN_A5;
+	static const uint8_t A6 = PIN_A6;
+	static const uint8_t A7 = PIN_A7;
+#define ADC_RESOLUTION 14
+
+// Other pins
+#define WB_I2C1_SDA (13) // SENSOR_SLOT IO_SLOT
+#define WB_I2C1_SCL (14) // SENSOR_SLOT IO_SLOT
+
+#define PIN_AREF (2)
+#define PIN_NFC1 (9)
+#define WB_IO5 PIN_NFC1
+#define WB_IO4 (4)
+#define PIN_NFC2 (10)
+
+static const uint8_t AREF = PIN_AREF;
+
+/*
+ * Serial interfaces
+ */
+// TXD1 RXD1 on Base Board
+#define PIN_SERIAL1_RX (15)
+#define PIN_SERIAL1_TX (16)
+
+// Connected to Jlink CDC
+#define PIN_SERIAL2_RX (8)
+#define PIN_SERIAL2_TX (6)
+
+/*
+ * SPI Interfaces
+ */
+#define SPI_INTERFACES_COUNT 2
+
+#define PIN_SPI_MISO (45)
+#define PIN_SPI_MOSI (44)
+#define PIN_SPI_SCK (43)
+
+#define PIN_SPI1_MISO (29)
+#define PIN_SPI1_MOSI (30)
+#define PIN_SPI1_SCK (3)
+
+	static const uint8_t SS = 42;
+	static const uint8_t MOSI = PIN_SPI_MOSI;
+	static const uint8_t MISO = PIN_SPI_MISO;
+	static const uint8_t SCK = PIN_SPI_SCK;
+
+/*
+ * Wire Interfaces
+ */
+#define WIRE_INTERFACES_COUNT 1
+
+#define PIN_WIRE_SDA (WB_I2C1_SDA)
+#define PIN_WIRE_SCL (WB_I2C1_SCL)
+
+// QSPI Pins
+// QSPI occupied by GPIO's
+#define PIN_QSPI_SCK 3
+#define PIN_QSPI_CS 26
+#define PIN_QSPI_IO0 30
+#define PIN_QSPI_IO1 29
+#define PIN_QSPI_IO2 28
+#define PIN_QSPI_IO3 2
+
+// On-board QSPI Flash
+// No onboard flash
+#define EXTERNAL_FLASH_DEVICES IS25LP080D
+#define EXTERNAL_FLASH_USE_QSPI
+
+#define USE_SX1262
+#define SX126X_CS (26)
+#define SX126X_DIO1 (10)
+#define SX126X_BUSY (9)
+#define SX126X_RESET (4)
+
+#define SX126X_POWER_EN (21)
+// DIO2 controlls an antenna switch and the TCXO voltage is controlled by DIO3
+#define SX126X_DIO2_AS_RF_SWITCH
+#define SX126X_DIO3_TCXO_VOLTAGE 1.8
+
+#define P_LORA_SCLK PIN_SPI1_SCK
+#define P_LORA_MISO PIN_SPI1_MISO
+#define P_LORA_MOSI PIN_SPI1_MOSI
+#define P_LORA_NSS SX126X_CS
+#define P_LORA_DIO_1 SX126X_DIO1
+#define P_LORA_BUSY SX126X_BUSY
+#define P_LORA_RESET SX126X_RESET
+#define P_LORA_PA_EN  31
+
+// enables 3.3V periphery like GPS or IO Module
+// Do not toggle this for GPS power savings
+#define PIN_3V3_EN (34)
+#define WB_IO2 PIN_3V3_EN
+
+// RAK1910 GPS module
+// If using the wisblock GPS module and pluged into Port A on WisBlock base
+// IO1 is hooked to PPS (pin 12 on header) = gpio 17
+// IO2 is hooked to GPS RESET = gpio 34, but it can not be used to this because IO2 is ALSO used to control 3V3_S power (1 is on).
+// Therefore must be 1 to keep peripherals powered
+// Power is on the controllable 3V3_S rail
+#define PIN_GPS_PPS (17) // Pulse per second input from the GPS
+
+#define PIN_GPS_RX PIN_SERIAL1_RX
+#define PIN_GPS_TX PIN_SERIAL1_TX
+
+#define PIN_GPS_1PPS PIN_GPS_PPS
+#define GPS_BAUD_RATE 9600
+#define GPS_ADDRESS 0x42  //i2c address for GPS
+
+// Battery
+// The battery sense is hooked to pin A0 (5)
+#define BATTERY_PIN PIN_A0
+// and has 12 bit resolution
+#define BATTERY_SENSE_RESOLUTION_BITS 12
+#define BATTERY_SENSE_RESOLUTION 4096.0
+#undef AREF_VOLTAGE
+#define AREF_VOLTAGE 3.0
+#define VBAT_AR_INTERNAL AR_INTERNAL_3_0
+#define ADC_MULTIPLIER 1.73
+
+#define HAS_RTC 1
+
+#define RAK_4631 1
+
+#ifdef __cplusplus
+}
+#endif
+
+/*----------------------------------------------------------------------------
+ *        Arduino objects - C++ only
+ *----------------------------------------------------------------------------*/
+
+#endif
diff --git a/variants/rak4631/RAK4631Board.cpp b/variants/rak4631/RAK4631Board.cpp
index 65c54711..9fb47b43 100644
--- a/variants/rak4631/RAK4631Board.cpp
+++ b/variants/rak4631/RAK4631Board.cpp
@@ -3,6 +3,28 @@
 
 #include "RAK4631Board.h"
 
+#ifdef NRF52_POWER_MANAGEMENT
+// Static configuration for power management
+// Values set in variant.h defines
+const PowerMgtConfig power_config = {
+  .lpcomp_ain_channel = PWRMGT_LPCOMP_AIN,
+  .lpcomp_refsel = PWRMGT_LPCOMP_REFSEL,
+  .voltage_bootlock = PWRMGT_VOLTAGE_BOOTLOCK
+};
+
+void RAK4631Board::initiateShutdown(uint8_t reason) {
+  // Disable LoRa module power before shutdown
+  digitalWrite(SX126X_POWER_EN, LOW);
+
+  if (reason == SHUTDOWN_REASON_LOW_VOLTAGE ||
+      reason == SHUTDOWN_REASON_BOOT_PROTECT) {
+    configureVoltageWake(power_config.lpcomp_ain_channel, power_config.lpcomp_refsel);
+  }
+
+  enterSystemOff(reason);
+}
+#endif // NRF52_POWER_MANAGEMENT
+
 void RAK4631Board::begin() {
   NRF52BoardDCDC::begin();
   pinMode(PIN_VBAT_READ, INPUT);
@@ -21,6 +43,11 @@ void RAK4631Board::begin() {
   Wire.begin();
 
   pinMode(SX126X_POWER_EN, OUTPUT);
+#ifdef NRF52_POWER_MANAGEMENT
+  // Boot voltage protection check (may not return if voltage too low)
+  // We need to call this after we configure SX126X_POWER_EN as output but before we pull high
+  checkBootVoltage(&power_config);
+#endif
   digitalWrite(SX126X_POWER_EN, HIGH);
   delay(10);   // give sx1262 some time to power up
 }
\ No newline at end of file
diff --git a/variants/rak4631/RAK4631Board.h b/variants/rak4631/RAK4631Board.h
index a181256b..7e67165b 100644
--- a/variants/rak4631/RAK4631Board.h
+++ b/variants/rak4631/RAK4631Board.h
@@ -4,34 +4,18 @@
 #include <Arduino.h>
 #include <helpers/NRF52Board.h>
 
-// LoRa radio module pins for RAK4631
-#define  P_LORA_DIO_1   47
-#define  P_LORA_NSS     42
-#define  P_LORA_RESET  RADIOLIB_NC   // 38
-#define  P_LORA_BUSY    46
-#define  P_LORA_SCLK    43
-#define  P_LORA_MISO    45
-#define  P_LORA_MOSI    44
-#define  SX126X_POWER_EN  37
-
-//#define PIN_GPS_SDA       13  //GPS SDA pin (output option)
-//#define PIN_GPS_SCL       14  //GPS SCL pin (output option)
-//#define PIN_GPS_TX        16  //GPS TX pin
-//#define PIN_GPS_RX        15  //GPS RX pin
-#define PIN_GPS_1PPS      17  //GPS PPS pin
-#define GPS_BAUD_RATE   9600
-#define GPS_ADDRESS   0x42  //i2c address for GPS
- 
-#define SX126X_DIO2_AS_RF_SWITCH  true
-#define SX126X_DIO3_TCXO_VOLTAGE   1.8
-
 // built-ins
 #define  PIN_VBAT_READ    5
 #define  ADC_MULTIPLIER   (3 * 1.73 * 1.187 * 1000)
 
-class RAK4631Board : public NRF52BoardDCDC, public NRF52BoardOTA {
+class RAK4631Board : public NRF52BoardDCDC {
+protected:
+#ifdef NRF52_POWER_MANAGEMENT
+  void initiateShutdown(uint8_t reason) override;
+#endif
+
 public:
-  RAK4631Board() : NRF52BoardOTA("RAK4631_OTA") {}
+  RAK4631Board() : NRF52Board("RAK4631_OTA") {}
   void begin();
 
   #define BATTERY_SAMPLES 8
diff --git a/variants/rak4631/platformio.ini b/variants/rak4631/platformio.ini
index 7293b4d4..9a9ab2dd 100644
--- a/variants/rak4631/platformio.ini
+++ b/variants/rak4631/platformio.ini
@@ -7,6 +7,7 @@ build_flags = ${nrf52_base.build_flags}
   -I variants/rak4631
   -D RAK_4631
   -D RAK_BOARD
+  -D NRF52_POWER_MANAGEMENT
   -D PIN_BOARD_SCL=14
   -D PIN_BOARD_SDA=13
   -D PIN_GPS_TX=PIN_SERIAL1_RX
diff --git a/variants/rak4631/variant.h b/variants/rak4631/variant.h
index e83d1339..142d93e9 100644
--- a/variants/rak4631/variant.h
+++ b/variants/rak4631/variant.h
@@ -104,6 +104,14 @@ extern "C"
 	static const uint8_t A7 = PIN_A7;
 #define ADC_RESOLUTION 14
 
+// Power management boot protection threshold (millivolts)
+// Set to 0 to disable boot protection
+#define PWRMGT_VOLTAGE_BOOTLOCK 3300   // Won't boot below this voltage (mV)
+// LPCOMP wake configuration (voltage recovery from SYSTEMOFF)
+// AIN3 = P0.05 = PIN_A0 / PIN_VBAT_READ
+#define PWRMGT_LPCOMP_AIN 3
+#define PWRMGT_LPCOMP_REFSEL 4  // 5/8 VDD (~3.13-3.44V)
+
 // Other pins
 #define PIN_AREF (2)
 #define PIN_NFC1 (9)
@@ -136,6 +144,19 @@ extern "C"
 	static const uint8_t MISO = PIN_SPI_MISO;
 	static const uint8_t SCK = PIN_SPI_SCK;
 
+// LoRa radio module pins for RAK4631
+#define  P_LORA_DIO_1 (47)
+#define  P_LORA_NSS (42)
+#define  P_LORA_RESET (-1)
+#define  P_LORA_BUSY (46)
+#define  P_LORA_SCLK (43)
+#define  P_LORA_MISO (45)
+#define  P_LORA_MOSI (44)
+#define  SX126X_POWER_EN (37)
+
+#define SX126X_DIO2_AS_RF_SWITCH  true
+#define SX126X_DIO3_TCXO_VOLTAGE   1.8
+
 /*
  * Wire Interfaces
  */
@@ -147,19 +168,23 @@ extern "C"
 #define PIN_WIRE1_SDA (24)
 #define PIN_WIRE1_SCL (25)
 
-	// QSPI Pins
-	// QSPI occupied by GPIO's
-	#define PIN_QSPI_SCK 3	// 19
-	#define PIN_QSPI_CS 26	// 17
-	#define PIN_QSPI_IO0 30 // 20
-	#define PIN_QSPI_IO1 29 // 21
-	#define PIN_QSPI_IO2 28 // 22
-	#define PIN_QSPI_IO3 2	// 23
+// QSPI Pins
+// QSPI occupied by GPIO's
+#define PIN_QSPI_SCK 3	// 19
+#define PIN_QSPI_CS 26	// 17
+#define PIN_QSPI_IO0 30 // 20
+#define PIN_QSPI_IO1 29 // 21
+#define PIN_QSPI_IO2 28 // 22
+#define PIN_QSPI_IO3 2	// 23
 
-	// On-board QSPI Flash
-	// No onboard flash
-	#define EXTERNAL_FLASH_DEVICES IS25LP080D
-	#define EXTERNAL_FLASH_USE_QSPI
+// On-board QSPI Flash
+// No onboard flash
+#define EXTERNAL_FLASH_DEVICES IS25LP080D
+#define EXTERNAL_FLASH_USE_QSPI
+
+#define PIN_GPS_1PPS      17  //GPS PPS pin
+#define GPS_BAUD_RATE   9600
+#define GPS_ADDRESS   0x42  //i2c address for GPS
 
 #ifdef __cplusplus
 }
diff --git a/variants/rak_wismesh_tag/RAKWismeshTagBoard.h b/variants/rak_wismesh_tag/RAKWismeshTagBoard.h
index 9aa457d2..cc5aa06f 100644
--- a/variants/rak_wismesh_tag/RAKWismeshTagBoard.h
+++ b/variants/rak_wismesh_tag/RAKWismeshTagBoard.h
@@ -8,9 +8,9 @@
 #define  PIN_VBAT_READ    5
 #define  ADC_MULTIPLIER   (3 * 1.73 * 1.187 * 1000)
 
-class RAKWismeshTagBoard : public NRF52BoardDCDC, public NRF52BoardOTA {
+class RAKWismeshTagBoard : public NRF52BoardDCDC {
 public:
-  RAKWismeshTagBoard() : NRF52BoardOTA("WISMESHTAG_OTA") {}
+  RAKWismeshTagBoard() : NRF52Board("WISMESHTAG_OTA") {}
   void begin();
 
 #if defined(P_LORA_TX_LED) && defined(LED_STATE_ON)
diff --git a/variants/sensecap_solar/SenseCapSolarBoard.h b/variants/sensecap_solar/SenseCapSolarBoard.h
index dfe007bf..67215b8e 100644
--- a/variants/sensecap_solar/SenseCapSolarBoard.h
+++ b/variants/sensecap_solar/SenseCapSolarBoard.h
@@ -4,9 +4,9 @@
 #include <Arduino.h>
 #include <helpers/NRF52Board.h>
 
-class SenseCapSolarBoard : public NRF52BoardOTA {
+class SenseCapSolarBoard : public NRF52BoardDCDC {
 public:
-  SenseCapSolarBoard() : NRF52BoardOTA("SENSECAP_SOLAR_OTA") {}
+  SenseCapSolarBoard() : NRF52Board("SENSECAP_SOLAR_OTA") {}
   void begin();
 
 #if defined(P_LORA_TX_LED)
diff --git a/variants/station_g2/platformio.ini b/variants/station_g2/platformio.ini
index 1428221d..91ef5f7a 100644
--- a/variants/station_g2/platformio.ini
+++ b/variants/station_g2/platformio.ini
@@ -16,7 +16,8 @@ build_flags =
   -D P_LORA_SCLK=12
   -D P_LORA_MISO=14
   -D P_LORA_MOSI=13
-  -D LORA_TX_POWER=19
+  -D LORA_TX_POWER=7 ; configured as 7dbm, because the final output will be ~27dbm (~0.5w) if the PA is enabled.
+  -D MAX_LORA_TX_POWER=19 ; max output without burning out the PA
 ;  -D P_LORA_TX_LED=35
   -D PIN_BOARD_SDA=5
   -D PIN_BOARD_SCL=6
diff --git a/variants/t1000-e/T1000eBoard.h b/variants/t1000-e/T1000eBoard.h
index f26bdf02..49223607 100644
--- a/variants/t1000-e/T1000eBoard.h
+++ b/variants/t1000-e/T1000eBoard.h
@@ -9,6 +9,7 @@ protected:
   uint8_t btn_prev_state;
 
 public:
+  T1000eBoard() : NRF52Board("T1000E_OTA") {}
   void begin();
 
   uint16_t getBattMilliVolts() override {
@@ -89,6 +90,4 @@ public:
 
     sd_power_system_off();
   }
-
-//  bool startOTAUpdate(const char* id, char reply[]) override;
 };
diff --git a/variants/t1000-e/platformio.ini b/variants/t1000-e/platformio.ini
index 555b182f..ac929308 100644
--- a/variants/t1000-e/platformio.ini
+++ b/variants/t1000-e/platformio.ini
@@ -107,6 +107,7 @@ build_flags = ${t1000-e.build_flags}
   -D DISPLAY_CLASS=NullDisplayDriver
   -D PIN_BUZZER=25
   -D PIN_BUZZER_EN=37      ; P1/5 - required for T1000-E
+  -D ADVERT_NAME='"@@MAC"'
 build_src_filter = ${t1000-e.build_src_filter}
   +<helpers/nrf52/SerialBLEInterface.cpp>
   +<helpers/ui/buzzer.cpp>
diff --git a/variants/thinknode_m1/ThinkNodeM1Board.h b/variants/thinknode_m1/ThinkNodeM1Board.h
index 500a0265..ebc46e6e 100644
--- a/variants/thinknode_m1/ThinkNodeM1Board.h
+++ b/variants/thinknode_m1/ThinkNodeM1Board.h
@@ -13,9 +13,9 @@
 #define PIN_VBAT_READ     (4)
 #define REAL_VBAT_MV_PER_LSB (VBAT_DIVIDER_COMP * VBAT_MV_PER_LSB)
 
-class ThinkNodeM1Board : public NRF52BoardOTA {
+class ThinkNodeM1Board : public NRF52Board {
 public:
-  ThinkNodeM1Board() : NRF52BoardOTA("THINKNODE_M1_OTA") {}
+  ThinkNodeM1Board() : NRF52Board("THINKNODE_M1_OTA") {}
   void begin();
   uint16_t getBattMilliVolts() override;
 
diff --git a/variants/thinknode_m1/platformio.ini b/variants/thinknode_m1/platformio.ini
index ade487e9..397bf8e3 100644
--- a/variants/thinknode_m1/platformio.ini
+++ b/variants/thinknode_m1/platformio.ini
@@ -83,6 +83,7 @@ build_flags =
   -D PIN_BUZZER=6
   -D AUTO_SHUTDOWN_MILLIVOLTS=3300
   -D QSPIFLASH=1
+  -D ENV_INCLUDE_GPS=1
 ;  -D MESH_PACKET_LOGGING=1
 ;  -D MESH_DEBUG=1
 build_src_filter = ${ThinkNode_M1.build_src_filter}
diff --git a/variants/thinknode_m1/target.cpp b/variants/thinknode_m1/target.cpp
index 2b04d7c6..c3b1abc2 100644
--- a/variants/thinknode_m1/target.cpp
+++ b/variants/thinknode_m1/target.cpp
@@ -11,7 +11,7 @@ WRAPPER_CLASS radio_driver(radio, board);
 
 VolatileRTCClock fallback_clock;
 AutoDiscoverRTCClock rtc_clock(fallback_clock);
-MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1);
+MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1, &rtc_clock);
 ThinkNodeM1SensorManager sensors = ThinkNodeM1SensorManager(nmea);
 
 #ifdef DISPLAY_CLASS
diff --git a/variants/thinknode_m1/target.h b/variants/thinknode_m1/target.h
index 1e4e1381..8425369d 100644
--- a/variants/thinknode_m1/target.h
+++ b/variants/thinknode_m1/target.h
@@ -22,6 +22,7 @@ class ThinkNodeM1SensorManager : public SensorManager {
   void stop_gps();
 public:
   ThinkNodeM1SensorManager(LocationProvider &location): _location(&location) { }
+  LocationProvider* getLocationProvider() override { return _location; }
   bool begin() override;
   bool querySensors(uint8_t requester_permissions, CayenneLPP& telemetry) override;
   void loop() override;
diff --git a/variants/thinknode_m3/ThinkNodeM3Board.cpp b/variants/thinknode_m3/ThinkNodeM3Board.cpp
new file mode 100644
index 00000000..ac513ade
--- /dev/null
+++ b/variants/thinknode_m3/ThinkNodeM3Board.cpp
@@ -0,0 +1,28 @@
+#include <Arduino.h>
+#include "ThinkNodeM3Board.h"
+#include <Wire.h>
+
+#include <bluefruit.h>
+
+void ThinkNodeM3Board::begin() {
+  NRF52Board::begin();
+  btn_prev_state = HIGH;
+
+  Wire.begin();
+
+  delay(10);   // give sx1262 some time to power up
+}
+
+uint16_t ThinkNodeM3Board::getBattMilliVolts() {
+  int adcvalue = 0;
+
+  analogReference(AR_INTERNAL_2_4);
+  analogReadResolution(ADC_RESOLUTION);
+  delay(10);
+
+  // ADC range is 0..2400mV and resolution is 12-bit (0..4095)
+  adcvalue = analogRead(PIN_VBAT_READ);
+  // Convert the raw value to compensated mv, taking the resistor-
+  // divider into account (providing the actual LIPO voltage)
+  return (uint16_t)((float)adcvalue * ADC_FACTOR);
+}
diff --git a/variants/thinknode_m3/ThinkNodeM3Board.h b/variants/thinknode_m3/ThinkNodeM3Board.h
new file mode 100644
index 00000000..1435d31d
--- /dev/null
+++ b/variants/thinknode_m3/ThinkNodeM3Board.h
@@ -0,0 +1,54 @@
+#pragma once
+
+#include <Arduino.h>
+#include <MeshCore.h>
+#include <helpers/NRF52Board.h>
+
+#define ADC_FACTOR ((1000.0*ADC_MULTIPLIER*AREF_VOLTAGE)/ADC_MAX)
+
+class ThinkNodeM3Board : public NRF52BoardDCDC {
+protected:
+#if NRF52_POWER_MANAGEMENT
+  void initiateShutdown(uint8_t reason) override;
+#endif
+  uint8_t btn_prev_state;
+
+public:
+  ThinkNodeM3Board() : NRF52Board("THINKNODE_M3_OTA") {}
+  void begin();
+  uint16_t getBattMilliVolts() override;
+
+#if defined(P_LORA_TX_LED)
+  void onBeforeTransmit() override {
+    digitalWrite(P_LORA_TX_LED, HIGH);   // turn TX LED on
+  }
+  void onAfterTransmit() override {
+    digitalWrite(P_LORA_TX_LED, LOW);   // turn TX LED off
+  }
+#endif
+
+  const char* getManufacturerName() const override {
+    return "Elecrow ThinkNode M3";
+  }
+
+  int buttonStateChanged() {
+  #ifdef BUTTON_PIN
+    uint8_t v = digitalRead(BUTTON_PIN);
+    if (v != btn_prev_state) {
+      btn_prev_state = v;
+      return (v == LOW) ? 1 : -1;
+    }
+  #endif
+    return 0;
+  }
+
+  void powerOff() override {
+    // turn off all leds, sd_power_system_off will not do this for us
+    #ifdef P_LORA_TX_LED
+    digitalWrite(P_LORA_TX_LED, LOW);
+    #endif
+
+    // power off board
+    sd_power_system_off();
+  }
+};
diff --git a/variants/thinknode_m3/ThinknodeM3Board.cpp b/variants/thinknode_m3/ThinknodeM3Board.cpp
deleted file mode 100644
index 74019fcb..00000000
--- a/variants/thinknode_m3/ThinknodeM3Board.cpp
+++ /dev/null
@@ -1,80 +0,0 @@
-#include <Arduino.h>
-#include "ThinknodeM3Board.h"
-#include <Wire.h>
-
-#include <bluefruit.h>
-
-void ThinknodeM3Board::begin() {
-  // for future use, sub-classes SHOULD call this from their begin()
-  startup_reason = BD_STARTUP_NORMAL;
-  btn_prev_state = HIGH;
-
-  sd_power_mode_set(NRF_POWER_MODE_LOWPWR);
-
-  // Enable DC/DC converter for improved power efficiency
-  NRF_POWER->DCDCEN = 1;
-
-  Wire.begin();
-
-  delay(10);   // give sx1262 some time to power up
-}
-
-#if 0
-static BLEDfu bledfu;
-
-static void connect_callback(uint16_t conn_handle) {
-  (void)conn_handle;
-  MESH_DEBUG_PRINTLN("BLE client connected");
-}
-
-static void disconnect_callback(uint16_t conn_handle, uint8_t reason) {
-  (void)conn_handle;
-  (void)reason;
-
-  MESH_DEBUG_PRINTLN("BLE client disconnected");
-}
-
-
-bool TrackerThinknodeM3Board::startOTAUpdate(const char* id, char reply[]) {
-  // Config the peripheral connection with maximum bandwidth
-  // more SRAM required by SoftDevice
-  // Note: All config***() function must be called before begin()
-  Bluefruit.configPrphBandwidth(BANDWIDTH_MAX);
-  Bluefruit.configPrphConn(92, BLE_GAP_EVENT_LENGTH_MIN, 16, 16);
-
-  Bluefruit.begin(1, 0);
-  // Set max power. Accepted values are: -40, -30, -20, -16, -12, -8, -4, 0, 4
-  Bluefruit.setTxPower(4);
-  // Set the BLE device name
-  Bluefruit.setName("T1000E_OTA");
-
-  Bluefruit.Periph.setConnectCallback(connect_callback);
-  Bluefruit.Periph.setDisconnectCallback(disconnect_callback);
-
-  // To be consistent OTA DFU should be added first if it exists
-  bledfu.begin();
-
-  // Set up and start advertising
-  // Advertising packet
-  Bluefruit.Advertising.addFlags(BLE_GAP_ADV_FLAGS_LE_ONLY_GENERAL_DISC_MODE);
-  Bluefruit.Advertising.addTxPower();
-  Bluefruit.Advertising.addName();
-
-  /* Start Advertising
-    - Enable auto advertising if disconnected
-    - Interval:  fast mode = 20 ms, slow mode = 152.5 ms
-    - Timeout for fast mode is 30 seconds
-    - Start(timeout) with timeout = 0 will advertise forever (until connected)
-
-    For recommended advertising interval
-    https://developer.apple.com/library/content/qa/qa1931/_index.html
-  */
-  Bluefruit.Advertising.restartOnDisconnect(true);
-  Bluefruit.Advertising.setInterval(32, 244); // in unit of 0.625 ms
-  Bluefruit.Advertising.setFastTimeout(30);   // number of seconds in fast mode
-  Bluefruit.Advertising.start(0);             // 0 = Don't stop advertising after n seconds
-
-  strcpy(reply, "OK - started");
-  return true;
-}
-#endif
\ No newline at end of file
diff --git a/variants/thinknode_m3/ThinknodeM3Board.h b/variants/thinknode_m3/ThinknodeM3Board.h
deleted file mode 100644
index c9b96273..00000000
--- a/variants/thinknode_m3/ThinknodeM3Board.h
+++ /dev/null
@@ -1,68 +0,0 @@
-#pragma once
-
-#include <MeshCore.h>
-#include <Arduino.h>
-
-#define ADC_FACTOR ((1000.0*ADC_MULTIPLIER*AREF_VOLTAGE)/ADC_MAX)
-
-class ThinknodeM3Board : public mesh::MainBoard {
-protected:
-  uint8_t startup_reason;
-  uint8_t btn_prev_state;
-
-public:
-  void begin();
-
-  uint16_t getBattMilliVolts() override {
-    int adcvalue = 0;
-
-    analogReference(AR_INTERNAL_2_4);
-    analogReadResolution(ADC_RESOLUTION);
-    delay(10);
-
-    // ADC range is 0..2400mV and resolution is 12-bit (0..4095)
-    adcvalue = analogRead(PIN_VBAT_READ);
-    // Convert the raw value to compensated mv, taking the resistor-
-    // divider into account (providing the actual LIPO voltage)
-    return (uint16_t)((float)adcvalue * ADC_FACTOR);
-  }
-
-  uint8_t getStartupReason() const override { return startup_reason; }
-
-  #if defined(P_LORA_TX_LED)
-  #if !defined(P_LORA_TX_LED_ON)
-    #define P_LORA_TX_LED_ON HIGH
-  #endif
-  void onBeforeTransmit() override {
-    digitalWrite(P_LORA_TX_LED, P_LORA_TX_LED_ON);   // turn TX LED on
-  }
-  void onAfterTransmit() override {
-    digitalWrite(P_LORA_TX_LED, !P_LORA_TX_LED_ON);   // turn TX LED off
-  }
-  #endif
-
-  const char* getManufacturerName() const override {
-    return "Elecrow ThinkNode M3";
-  }
-
-  int buttonStateChanged() {
-  #ifdef BUTTON_PIN
-    uint8_t v = digitalRead(BUTTON_PIN);
-    if (v != btn_prev_state) {
-      btn_prev_state = v;
-      return (v == LOW) ? 1 : -1;
-    }
-  #endif
-    return 0;
-  }
-
-  void powerOff() override {
-    sd_power_system_off();
-  }
-
-  void reboot() override {
-    NVIC_SystemReset();
-  }
-
-//  bool startOTAUpdate(const char* id, char reply[]) override;
-};
\ No newline at end of file
diff --git a/variants/thinknode_m3/target.cpp b/variants/thinknode_m3/target.cpp
index c6708e4d..91d186dc 100644
--- a/variants/thinknode_m3/target.cpp
+++ b/variants/thinknode_m3/target.cpp
@@ -2,7 +2,7 @@
 #include "target.h"
 #include <helpers/sensors/MicroNMEALocationProvider.h>
 
-ThinknodeM3Board board;
+ThinkNodeM3Board board;
 
 RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, SPI);
 
@@ -30,26 +30,26 @@ static const uint32_t rfswitch_dios[Module::RFSWITCH_MAX_PINS] = {
   RADIOLIB_LR11X0_DIO5,
   RADIOLIB_LR11X0_DIO6,
   RADIOLIB_NC,
-  RADIOLIB_NC, 
+  RADIOLIB_NC,
   RADIOLIB_NC
 };
 
 static const Module::RfSwitchMode_t rfswitch_table[] = {
-  // mode                 DIO5  DIO6 
-  { LR11x0::MODE_STBY,   {LOW , LOW  }},  
+  // mode                 DIO5  DIO6
+  { LR11x0::MODE_STBY,   {LOW , LOW  }},
   { LR11x0::MODE_RX,     {HIGH, LOW  }},
   { LR11x0::MODE_TX,     {HIGH, HIGH }},
   { LR11x0::MODE_TX_HP,  {LOW , HIGH }},
-  { LR11x0::MODE_TX_HF,  {LOW , LOW  }}, 
+  { LR11x0::MODE_TX_HF,  {LOW , LOW  }},
   { LR11x0::MODE_GNSS,   {LOW , LOW  }},
-  { LR11x0::MODE_WIFI,   {LOW , LOW  }},  
+  { LR11x0::MODE_WIFI,   {LOW , LOW  }},
   END_OF_MODE_TABLE,
 };
 #endif
 
 bool radio_init() {
   rtc_clock.begin(Wire);
-  
+
 #ifdef LR11X0_DIO3_TCXO_VOLTAGE
   float tcxo = LR11X0_DIO3_TCXO_VOLTAGE;
 #else
@@ -64,7 +64,7 @@ bool radio_init() {
     Serial.println(status);
     return false;  // fail
   }
-  
+
   radio.setCRC(2);
   radio.explicitHeader();
 
diff --git a/variants/thinknode_m3/target.h b/variants/thinknode_m3/target.h
index f60a85b0..23e99581 100644
--- a/variants/thinknode_m3/target.h
+++ b/variants/thinknode_m3/target.h
@@ -3,7 +3,7 @@
 #define RADIOLIB_STATIC_ONLY 1
 #include <RadioLib.h>
 #include <helpers/radiolib/RadioLibWrappers.h>
-#include "ThinknodeM3Board.h"
+#include "ThinkNodeM3Board.h"
 #include <helpers/radiolib/CustomLR1110Wrapper.h>
 #include <helpers/ArduinoHelpers.h>
 #include <helpers/sensors/EnvironmentSensorManager.h>
@@ -17,7 +17,7 @@
   extern NullDisplayDriver display;
 #endif
 
-extern ThinknodeM3Board board;
+extern ThinkNodeM3Board board;
 extern WRAPPER_CLASS radio_driver;
 extern AutoDiscoverRTCClock rtc_clock;
 extern EnvironmentSensorManager sensors;
diff --git a/variants/thinknode_m6/ThinkNodeM6Board.cpp b/variants/thinknode_m6/ThinkNodeM6Board.cpp
index 1ccc2026..8ebae64c 100644
--- a/variants/thinknode_m6/ThinkNodeM6Board.cpp
+++ b/variants/thinknode_m6/ThinkNodeM6Board.cpp
@@ -4,25 +4,9 @@
 #ifdef THINKNODE_M6
 
 #include <Wire.h>
-#include <bluefruit.h>
-
-static BLEDfu bledfu;
-
-static void connect_callback(uint16_t conn_handle) {
-  (void)conn_handle;
-  MESH_DEBUG_PRINTLN("BLE client connected");
-}
-
-static void disconnect_callback(uint16_t conn_handle, uint8_t reason) {
-  (void)conn_handle;
-  (void)reason;
-
-  MESH_DEBUG_PRINTLN("BLE client disconnected");
-}
 
 void ThinkNodeM6Board::begin() {
-  // for future use, sub-classes SHOULD call this from their begin()
-  startup_reason = BD_STARTUP_NORMAL;
+  NRF52Board::begin();
 
   Wire.begin();
 
@@ -49,47 +33,4 @@ uint16_t ThinkNodeM6Board::getBattMilliVolts() {
   // divider into account (providing the actual LIPO voltage)
   return (uint16_t)((float)adcvalue * REAL_VBAT_MV_PER_LSB);
 }
-
-bool ThinkNodeM6Board::startOTAUpdate(const char *id, char reply[]) {
-  // Config the peripheral connection with maximum bandwidth
-  // more SRAM required by SoftDevice
-  // Note: All config***() function must be called before begin()
-  Bluefruit.configPrphBandwidth(BANDWIDTH_MAX);
-  Bluefruit.configPrphConn(92, BLE_GAP_EVENT_LENGTH_MIN, 16, 16);
-
-  Bluefruit.begin(1, 0);
-  // Set max power. Accepted values are: -40, -30, -20, -16, -12, -8, -4, 0, 4
-  Bluefruit.setTxPower(4);
-  // Set the BLE device name
-  Bluefruit.setName("THINKNODE_M1_OTA");
-
-  Bluefruit.Periph.setConnectCallback(connect_callback);
-  Bluefruit.Periph.setDisconnectCallback(disconnect_callback);
-
-  // To be consistent OTA DFU should be added first if it exists
-  bledfu.begin();
-
-  // Set up and start advertising
-  // Advertising packet
-  Bluefruit.Advertising.addFlags(BLE_GAP_ADV_FLAGS_LE_ONLY_GENERAL_DISC_MODE);
-  Bluefruit.Advertising.addTxPower();
-  Bluefruit.Advertising.addName();
-
-  /* Start Advertising
-    - Enable auto advertising if disconnected
-    - Interval:  fast mode = 20 ms, slow mode = 152.5 ms
-    - Timeout for fast mode is 30 seconds
-    - Start(timeout) with timeout = 0 will advertise forever (until connected)
-
-    For recommended advertising interval
-    https://developer.apple.com/library/content/qa/qa1931/_index.html
-  */
-  Bluefruit.Advertising.restartOnDisconnect(true);
-  Bluefruit.Advertising.setInterval(32, 244); // in unit of 0.625 ms
-  Bluefruit.Advertising.setFastTimeout(30);   // number of seconds in fast mode
-  Bluefruit.Advertising.start(0);             // 0 = Don't stop advertising after n seconds
-
-  strcpy(reply, "OK - started");
-  return true;
-}
 #endif
diff --git a/variants/thinknode_m6/ThinkNodeM6Board.h b/variants/thinknode_m6/ThinkNodeM6Board.h
index c3d7dad6..32baa2a0 100644
--- a/variants/thinknode_m6/ThinkNodeM6Board.h
+++ b/variants/thinknode_m6/ThinkNodeM6Board.h
@@ -1,7 +1,8 @@
 #pragma once
 
-#include <MeshCore.h>
 #include <Arduino.h>
+#include <MeshCore.h>
+#include <helpers/NRF52Board.h>
 
 // built-ins
 #define VBAT_MV_PER_LSB   (0.73242188F)   // 3.0V ADC range and 12-bit ADC resolution = 3000mV/4096
@@ -11,35 +12,28 @@
 #define PIN_VBAT_READ     BATTERY_PIN
 #define REAL_VBAT_MV_PER_LSB (VBAT_DIVIDER_COMP * VBAT_MV_PER_LSB)
 
-class ThinkNodeM6Board : public mesh::MainBoard {
+class ThinkNodeM6Board : public NRF52BoardDCDC {
 protected:
-  uint8_t startup_reason;
+#if NRF52_POWER_MANAGEMENT
+  void initiateShutdown(uint8_t reason) override;
+#endif
 
 public:
-
+  ThinkNodeM6Board() : NRF52Board("THINKNODE_M6_OTA") {}
   void begin();
   uint16_t getBattMilliVolts() override;
-  bool startOTAUpdate(const char* id, char reply[]) override;
 
-  uint8_t getStartupReason() const override {
-    return startup_reason;
-  }
-
-  #if defined(P_LORA_TX_LED)
+#if defined(P_LORA_TX_LED)
   void onBeforeTransmit() override {
     digitalWrite(P_LORA_TX_LED, HIGH);   // turn TX LED on
   }
   void onAfterTransmit() override {
     digitalWrite(P_LORA_TX_LED, LOW);   // turn TX LED off
   }
-  #endif
+#endif
 
   const char* getManufacturerName() const override {
-    return "Elecrow ThinkNode-M6";
-  }
-
-  void reboot() override {
-    NVIC_SystemReset();
+    return "Elecrow ThinkNode M6";
   }
 
   void powerOff() override {
@@ -51,6 +45,5 @@ public:
 
     // power off board
     sd_power_system_off();
-
   }
 };
diff --git a/variants/wio-tracker-l1/WioTrackerL1Board.h b/variants/wio-tracker-l1/WioTrackerL1Board.h
index bfd87d39..052238e6 100644
--- a/variants/wio-tracker-l1/WioTrackerL1Board.h
+++ b/variants/wio-tracker-l1/WioTrackerL1Board.h
@@ -4,12 +4,12 @@
 #include <Arduino.h>
 #include <helpers/NRF52Board.h>
 
-class WioTrackerL1Board : public NRF52BoardDCDC, public NRF52BoardOTA {
+class WioTrackerL1Board : public NRF52BoardDCDC {
 protected:
   uint8_t btn_prev_state;
 
 public:
-  WioTrackerL1Board() : NRF52BoardOTA("WioTrackerL1 OTA") {}
+  WioTrackerL1Board() : NRF52Board("WioTrackerL1 OTA") {}
   void begin();
 
 #if defined(P_LORA_TX_LED)
diff --git a/variants/wio-tracker-l1/platformio.ini b/variants/wio-tracker-l1/platformio.ini
index 31c6bcb0..75651d69 100644
--- a/variants/wio-tracker-l1/platformio.ini
+++ b/variants/wio-tracker-l1/platformio.ini
@@ -95,6 +95,7 @@ build_flags = ${WioTrackerL1.build_flags}
   -D UI_HAS_JOYSTICK=1
   -D PIN_BUZZER=12
   -D QSPIFLASH=1
+  -D ADVERT_NAME='"@@MAC"'
   ; -D MESH_PACKET_LOGGING=1
   ; -D MESH_DEBUG=1
 build_src_filter = ${WioTrackerL1.build_src_filter}
diff --git a/variants/wio_wm1110/WioWM1110Board.cpp b/variants/wio_wm1110/WioWM1110Board.cpp
index d0ab9785..2825e554 100644
--- a/variants/wio_wm1110/WioWM1110Board.cpp
+++ b/variants/wio_wm1110/WioWM1110Board.cpp
@@ -1,24 +1,9 @@
 #ifdef WIO_WM1110
 
-#include <Arduino.h>
-#include <Wire.h>
-#include <bluefruit.h>
-
 #include "WioWM1110Board.h"
 
-static BLEDfu bledfu;
-
-static void connect_callback(uint16_t conn_handle) {
-  (void)conn_handle;
-  MESH_DEBUG_PRINTLN("BLE client connected");
-}
-
-static void disconnect_callback(uint16_t conn_handle, uint8_t reason) {
-  (void)conn_handle;
-  (void)reason;
-
-  MESH_DEBUG_PRINTLN("BLE client disconnected");
-}
+#include <Arduino.h>
+#include <Wire.h>
 
 void WioWM1110Board::begin() {
   NRF52BoardDCDC::begin();
@@ -42,31 +27,5 @@ void WioWM1110Board::begin() {
 
   delay(10);
 }
-
-bool WioWM1110Board::startOTAUpdate(const char *id, char reply[]) {
-  Bluefruit.configPrphBandwidth(BANDWIDTH_MAX);
-  Bluefruit.configPrphConn(92, BLE_GAP_EVENT_LENGTH_MIN, 16, 16);
-
-  Bluefruit.begin(1, 0);
-  Bluefruit.setTxPower(4);
-  Bluefruit.setName("WM1110_OTA");
-
-  Bluefruit.Periph.setConnectCallback(connect_callback);
-  Bluefruit.Periph.setDisconnectCallback(disconnect_callback);
-
-  bledfu.begin();
-
-  Bluefruit.Advertising.addFlags(BLE_GAP_ADV_FLAGS_LE_ONLY_GENERAL_DISC_MODE);
-  Bluefruit.Advertising.addTxPower();
-  Bluefruit.Advertising.addName();
-  Bluefruit.Advertising.restartOnDisconnect(true);
-  Bluefruit.Advertising.setInterval(32, 244);
-  Bluefruit.Advertising.setFastTimeout(30);
-  Bluefruit.Advertising.start(0);
-
-  strcpy(reply, "OK - started");
-  return true;
-}
-
 #endif
 
diff --git a/variants/wio_wm1110/WioWM1110Board.h b/variants/wio_wm1110/WioWM1110Board.h
index 697028b0..26f95c86 100644
--- a/variants/wio_wm1110/WioWM1110Board.h
+++ b/variants/wio_wm1110/WioWM1110Board.h
@@ -13,6 +13,7 @@
 
 class WioWM1110Board : public NRF52BoardDCDC {
 public:
+  WioWM1110Board() : NRF52Board("WM1110_OTA") {}
   void begin();
 
 #if defined(LED_GREEN)
@@ -37,8 +38,6 @@ public:
     return "Seeed Wio WM1110";
   }
 
-  bool startOTAUpdate(const char* id, char reply[]) override;
-
   void enableSensorPower(bool enable) {
     digitalWrite(SENSOR_POWER_PIN, enable ? HIGH : LOW);
     if (enable) {
diff --git a/variants/xiao_nrf52/XiaoNrf52Board.cpp b/variants/xiao_nrf52/XiaoNrf52Board.cpp
index b7b60dc6..42ee6a87 100644
--- a/variants/xiao_nrf52/XiaoNrf52Board.cpp
+++ b/variants/xiao_nrf52/XiaoNrf52Board.cpp
@@ -5,12 +5,40 @@
 
 #include "XiaoNrf52Board.h"
 
+#ifdef NRF52_POWER_MANAGEMENT
+// Static configuration for power management
+// Values set in variant.h defines
+const PowerMgtConfig power_config = {
+  .lpcomp_ain_channel = PWRMGT_LPCOMP_AIN,
+  .lpcomp_refsel = PWRMGT_LPCOMP_REFSEL,
+  .voltage_bootlock = PWRMGT_VOLTAGE_BOOTLOCK
+};
+
+void XiaoNrf52Board::initiateShutdown(uint8_t reason) {
+  bool enable_lpcomp = (reason == SHUTDOWN_REASON_LOW_VOLTAGE ||
+                        reason == SHUTDOWN_REASON_BOOT_PROTECT);
+
+  pinMode(VBAT_ENABLE, OUTPUT);
+  digitalWrite(VBAT_ENABLE, enable_lpcomp ? LOW : HIGH);
+
+  if (enable_lpcomp) {
+    configureVoltageWake(power_config.lpcomp_ain_channel, power_config.lpcomp_refsel);
+  }
+
+  enterSystemOff(reason);
+}
+#endif // NRF52_POWER_MANAGEMENT
+
 void XiaoNrf52Board::begin() {
   NRF52BoardDCDC::begin();
 
+  // Configure battery voltage ADC
   pinMode(PIN_VBAT, INPUT);
   pinMode(VBAT_ENABLE, OUTPUT);
-  digitalWrite(VBAT_ENABLE, HIGH);
+  digitalWrite(VBAT_ENABLE, LOW);  // Enable VBAT divider for reading
+  analogReadResolution(12);
+  analogReference(AR_INTERNAL_3_0);
+  delay(50);  // Allow ADC to settle
 
 #ifdef PIN_USER_BTN
   pinMode(PIN_USER_BTN, INPUT_PULLUP);
@@ -27,9 +55,20 @@ void XiaoNrf52Board::begin() {
   digitalWrite(P_LORA_TX_LED, HIGH);
 #endif
 
-  //  pinMode(SX126X_POWER_EN, OUTPUT);
-  //  digitalWrite(SX126X_POWER_EN, HIGH);
-  delay(10); // give sx1262 some time to power up
+#ifdef NRF52_POWER_MANAGEMENT
+  // Boot voltage protection check (may not return if voltage too low)
+  checkBootVoltage(&power_config);
+#endif
+
+  delay(10);  // Give sx1262 some time to power up
+}
+
+uint16_t XiaoNrf52Board::getBattMilliVolts() {
+  // https://wiki.seeedstudio.com/XIAO_BLE#q3-what-are-the-considerations-when-using-xiao-nrf52840-sense-for-battery-charging
+  // VBAT_ENABLE must be LOW to read battery voltage
+  digitalWrite(VBAT_ENABLE, LOW);
+  int adcvalue = analogRead(PIN_VBAT);
+  return (adcvalue * ADC_MULTIPLIER * AREF_VOLTAGE) / 4.096;
 }
 
 #endif
\ No newline at end of file
diff --git a/variants/xiao_nrf52/XiaoNrf52Board.h b/variants/xiao_nrf52/XiaoNrf52Board.h
index 1c46dfee..bd0fd9b1 100644
--- a/variants/xiao_nrf52/XiaoNrf52Board.h
+++ b/variants/xiao_nrf52/XiaoNrf52Board.h
@@ -6,9 +6,14 @@
 
 #ifdef XIAO_NRF52
 
-class XiaoNrf52Board : public NRF52BoardDCDC, public NRF52BoardOTA {
+class XiaoNrf52Board : public NRF52BoardDCDC {
+protected:
+#if NRF52_POWER_MANAGEMENT
+  void initiateShutdown(uint8_t reason) override;
+#endif
+
 public:
-  XiaoNrf52Board() : NRF52BoardOTA("XIAO_NRF52_OTA") {}
+  XiaoNrf52Board() : NRF52Board("XIAO_NRF52_OTA") {}
   void begin();
 
 #if defined(P_LORA_TX_LED)
@@ -20,21 +25,7 @@ public:
   }
 #endif
 
-  uint16_t getBattMilliVolts() override {
-    // Please read befor going further ;)
-    // https://wiki.seeedstudio.com/XIAO_BLE#q3-what-are-the-considerations-when-using-xiao-nrf52840-sense-for-battery-charging
-
-    // We can't drive VBAT_ENABLE to HIGH as long
-    // as we don't know wether we are charging or not ...
-    // this is a 3mA loss (4/1500)
-    digitalWrite(VBAT_ENABLE, LOW);
-    int adcvalue = 0;
-    analogReadResolution(12);
-    analogReference(AR_INTERNAL_3_0);
-    delay(10);
-    adcvalue = analogRead(PIN_VBAT);
-    return (adcvalue * ADC_MULTIPLIER * AREF_VOLTAGE) / 4.096;
-  }
+  uint16_t getBattMilliVolts() override;
 
   const char* getManufacturerName() const override {
     return "Seeed Xiao-nrf52";
diff --git a/variants/xiao_nrf52/platformio.ini b/variants/xiao_nrf52/platformio.ini
index edbf6275..6e96018b 100644
--- a/variants/xiao_nrf52/platformio.ini
+++ b/variants/xiao_nrf52/platformio.ini
@@ -9,6 +9,7 @@ build_flags = ${nrf52_base.build_flags}
   -I variants/xiao_nrf52
   -UENV_INCLUDE_GPS
   -D NRF52_PLATFORM
+  -D NRF52_POWER_MANAGEMENT
   -D XIAO_NRF52
   -D RADIO_CLASS=CustomSX1262
   -D WRAPPER_CLASS=CustomSX1262Wrapper
diff --git a/variants/xiao_nrf52/variant.h b/variants/xiao_nrf52/variant.h
index 3f4d7afe..25619b9e 100644
--- a/variants/xiao_nrf52/variant.h
+++ b/variants/xiao_nrf52/variant.h
@@ -75,6 +75,21 @@ static const uint8_t D10 = 10;
 #define AREF_VOLTAGE            (3.0)
 #define ADC_MULTIPLIER          (3.0F) // 1M, 512k divider bridge
 
+// Power management boot protection threshold (millivolts)
+// Set to 0 to disable boot protection
+#define PWRMGT_VOLTAGE_BOOTLOCK    3300   // Won't boot below this voltage
+
+// LPCOMP wake configuration (voltage recovery from SYSTEMOFF)
+#define PWRMGT_LPCOMP_AIN           7     // AIN7 = P0.31 = PIN_VBAT
+// IMPORTANT: The XIAO exposes battery via a resistor divider (ADC_MULTIPLIER = 3.0).
+// LPCOMP measures the divided voltage, not the battery voltage directly.
+// Vpin = VDD * (REFSEL fraction), and VBAT ≈ Vpin * ADC_MULTIPLIER.
+//
+// Using 3/8 VDD gives a wake threshold above the boot protection point:
+// - If VDD ≈ 3.0V:  VBAT ≈ (3.0 * 3/8) * 3 ≈ 3375mV
+// - If VDD ≈ 3.3V:  VBAT ≈ (3.3 * 3/8) * 3 ≈ 3712mV
+#define PWRMGT_LPCOMP_REFSEL   2     // 3/8 VDD (~3.38-3.71V)
+
 static const uint8_t A0  = PIN_A0;
 static const uint8_t A1  = PIN_A1;
 static const uint8_t A2  = PIN_A2;