meshcore-dev/MeshCore
1
0
Fork 0
mirror of https://github.com/meshcore-dev/MeshCore.git synced 2026-04-20 22:13:47 +00:00
Code Issues Projects Releases Packages Wiki Activity

Merge remote-tracking branch 'upstream/dev' into rak-ethernet

Browse source 
# Conflicts:
#	docs/faq.md
This commit is contained in:
Ryan Gregg 2026-04-20 15:06:09 +00:00
commit 2a2c7a171d
No known key found for this signature in database
272 changed files with 6186 additions and 1045 deletions
Download patch file Download diff file Expand all files Collapse all files

1
variants/ebyte_eora_s3/platformio.ini
View file

@ -30,6 +30,7 @@ build_flags =
-D SX126X_DIO2_AS_RF_SWITCH=true
-D SX126X_DIO3_TCXO_VOLTAGE=1.8
-D SX126X_CURRENT_LIMIT=140
-D USE_SX1262
-D RADIO_CLASS=CustomSX1262
-D WRAPPER_CLASS=CustomSX1262Wrapper
-D LORA_TX_POWER=22

57
variants/gat562_30s_mesh_kit/GAT56230SMeshKitBoard.cpp Normal file
View file

@ -0,0 +1,57 @@
#include <Arduino.h>
#include <Wire.h>
#include "GAT56230SMeshKitBoard.h"
#ifdef NRF52_POWER_MANAGEMENT
// Static configuration for power management
// Values set in variant.h defines
const PowerMgtConfig power_config = {
.lpcomp_ain_channel = PWRMGT_LPCOMP_AIN,
.lpcomp_refsel = PWRMGT_LPCOMP_REFSEL,
.voltage_bootlock = PWRMGT_VOLTAGE_BOOTLOCK
};
void GAT56230SMeshKitBoard::initiateShutdown(uint8_t reason) {
// Disable LoRa module power before shutdown
digitalWrite(SX126X_POWER_EN, LOW);
if (reason == SHUTDOWN_REASON_LOW_VOLTAGE ||
reason == SHUTDOWN_REASON_BOOT_PROTECT) {
configureVoltageWake(power_config.lpcomp_ain_channel, power_config.lpcomp_refsel);
}
enterSystemOff(reason);
}
#endif // NRF52_POWER_MANAGEMENT
void GAT56230SMeshKitBoard::begin() {
NRF52BoardDCDC::begin();
pinMode(PIN_VBAT_READ, INPUT);
// Set all button pins to INPUT_PULLUP
pinMode(PIN_BUTTON1, INPUT_PULLUP);
pinMode(PIN_BUTTON2, INPUT_PULLUP);
pinMode(PIN_BUTTON3, INPUT_PULLUP);
pinMode(PIN_BUTTON4, INPUT_PULLUP);
pinMode(PIN_BUTTON5, INPUT_PULLUP);
pinMode(PIN_BUTTON6, INPUT_PULLUP);
#if defined(PIN_BOARD_SDA) && defined(PIN_BOARD_SCL)
Wire.setPins(PIN_BOARD_SDA, PIN_BOARD_SCL);
#endif
Wire.begin();
pinMode(SX126X_POWER_EN, OUTPUT);
#ifdef NRF52_POWER_MANAGEMENT
// Boot voltage protection check (may not return if voltage too low)
// We need to call this after we configure SX126X_POWER_EN as output but before we pull high
checkBootVoltage(&power_config);
#endif
digitalWrite(SX126X_POWER_EN, HIGH);
delay(10); // give sx1262 some time to power up
}

53
variants/gat562_30s_mesh_kit/GAT56230SMeshKitBoard.h Normal file
View file

@ -0,0 +1,53 @@
#pragma once
#include <MeshCore.h>
#include <Arduino.h>
#include <helpers/NRF52Board.h>
class GAT56230SMeshKitBoard : public NRF52BoardDCDC {
protected:
#ifdef NRF52_POWER_MANAGEMENT
void initiateShutdown(uint8_t reason) override;
#endif
public:
GAT56230SMeshKitBoard() : NRF52Board("GAT562_OTA") {}
void begin();
#define BATTERY_SAMPLES 8
uint16_t getBattMilliVolts() override {
analogReadResolution(12);
uint32_t raw = 0;
for (int i = 0; i < BATTERY_SAMPLES; i++) {
raw += analogRead(PIN_VBAT_READ);
}
raw = raw / BATTERY_SAMPLES;
return (ADC_MULTIPLIER * raw) / 4096;
}
const char* getManufacturerName() const override {
return "GAT562 30S Mesh Kit";
}
#if defined(P_LORA_TX_LED)
void onBeforeTransmit() override {
digitalWrite(P_LORA_TX_LED, HIGH); // turn TX LED on
}
void onAfterTransmit() override {
digitalWrite(P_LORA_TX_LED, LOW); // turn TX LED off
}
#endif
void powerOff() override {
uint32_t button_pin = PIN_BUTTON1;
nrf_gpio_cfg_input(button_pin, NRF_GPIO_PIN_PULLUP);
nrf_gpio_cfg_sense_set(button_pin, NRF_GPIO_PIN_SENSE_LOW);
sd_power_system_off();
}
};

114
variants/gat562_30s_mesh_kit/platformio.ini Normal file
View file

@ -0,0 +1,114 @@
[GAT562_30S_Mesh_Kit]
extends = nrf52_base
board = rak4631
board_check = true
build_flags = ${nrf52_base.build_flags}
${sensor_base.build_flags}
-I variants/gat562_30s_mesh_kit
-D RAK_4631
-D RAK_BOARD
-D NRF52_POWER_MANAGEMENT
-D PIN_BOARD_SCL=14
-D PIN_BOARD_SDA=13
-D PIN_OLED_RESET=-1
-D UI_HAS_JOYSTICK=1
-D RADIO_CLASS=CustomSX1262
-D WRAPPER_CLASS=CustomSX1262Wrapper
-D LORA_TX_POWER=22
-D SX126X_CURRENT_LIMIT=140
-D PIN_BUZZER=33
-D SX126X_RX_BOOSTED_GAIN=1
-D SX126X_DIO2_AS_RF_SWITCH=true
build_src_filter = ${nrf52_base.build_src_filter}
+<../variants/gat562_30s_mesh_kit>
+<helpers/ui/SSD1306Display.cpp>
+<helpers/ui/MomentaryButton.cpp>
+<helpers/sensors>
lib_deps =
${nrf52_base.lib_deps}
${sensor_base.lib_deps}
adafruit/Adafruit SSD1306 @ ^2.5.13
sparkfun/SparkFun u-blox GNSS Arduino Library@^2.2.27
[env:GAT562_30S_Mesh_Kit_repeater]
extends = GAT562_30S_Mesh_Kit
build_flags =
${GAT562_30S_Mesh_Kit.build_flags}
-D DISPLAY_CLASS=SSD1306Display
-D ADVERT_NAME='"GAT562 Repeater"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D MAX_NEIGHBOURS=50
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${GAT562_30S_Mesh_Kit.build_src_filter}
+<helpers/ui/SSD1306Display.cpp>
+<../examples/simple_repeater>
[env:GAT562_30S_Mesh_Kit_room_server]
extends = GAT562_30S_Mesh_Kit
build_flags =
${GAT562_30S_Mesh_Kit.build_flags}
-D DISPLAY_CLASS=SSD1306Display
-D ADVERT_NAME='"GAT562 Room"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D ROOM_PASSWORD='"hello"'
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${GAT562_30S_Mesh_Kit.build_src_filter}
+<helpers/ui/SSD1306Display.cpp>
+<../examples/simple_room_server>
[env:GAT562_30S_Mesh_Kit_companion_radio_usb]
extends = GAT562_30S_Mesh_Kit
board_build.ldscript = boards/nrf52840_s140_v6_extrafs.ld
board_upload.maximum_size = 712704
build_flags =
${GAT562_30S_Mesh_Kit.build_flags}
-I examples/companion_radio/ui-new
-D DISPLAY_CLASS=SSD1306Display
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
; NOTE: DO NOT ENABLE --> -D MESH_PACKET_LOGGING=1
; NOTE: DO NOT ENABLE --> -D MESH_DEBUG=1
build_src_filter = ${GAT562_30S_Mesh_Kit.build_src_filter}
+<../examples/companion_radio/*.cpp>
+<../examples/companion_radio/ui-new/*.cpp>
+<helpers/ui/buzzer.cpp>
lib_deps =
${GAT562_30S_Mesh_Kit.lib_deps}
densaugeo/base64 @ ~1.4.0
end2endzone/NonBlockingRTTTL@^1.3.0
[env:GAT562_30S_Mesh_Kit_companion_radio_ble]
extends = GAT562_30S_Mesh_Kit
board_build.ldscript = boards/nrf52840_s140_v6_extrafs.ld
board_upload.maximum_size = 712704
build_flags =
${GAT562_30S_Mesh_Kit.build_flags}
-I examples/companion_radio/ui-new
-D DISPLAY_CLASS=SSD1306Display
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
-D BLE_PIN_CODE=123456
-D BLE_DEBUG_LOGGING=1
-D OFFLINE_QUEUE_SIZE=256
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${GAT562_30S_Mesh_Kit.build_src_filter}
+<helpers/nrf52/SerialBLEInterface.cpp>
+<helpers/ui/buzzer.cpp>
+<../examples/companion_radio/*.cpp>
+<../examples/companion_radio/ui-new/*.cpp>
lib_deps =
${GAT562_30S_Mesh_Kit.lib_deps}
densaugeo/base64 @ ~1.4.0
end2endzone/NonBlockingRTTTL@^1.3.0

59
variants/gat562_30s_mesh_kit/target.cpp Normal file
View file

@ -0,0 +1,59 @@
#include <Arduino.h>
#include "target.h"
#include <helpers/ArduinoHelpers.h>
GAT56230SMeshKitBoard board;
#ifndef PIN_USER_BTN
#define PIN_USER_BTN (-1)
#endif
#ifdef DISPLAY_CLASS
DISPLAY_CLASS display;
MomentaryButton user_btn(PIN_USER_BTN, 1000, true, false, false);
MomentaryButton joystick_left(JOYSTICK_LEFT, 1000, true, false, false);
MomentaryButton joystick_right(JOYSTICK_RIGHT, 1000, true, false, false);
MomentaryButton back_btn(PIN_BACK_BTN, 1000, true, false, true);
#endif
RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, SPI);
WRAPPER_CLASS radio_driver(radio, board);
VolatileRTCClock fallback_clock;
AutoDiscoverRTCClock rtc_clock(fallback_clock);
#if ENV_INCLUDE_GPS
#include <helpers/sensors/MicroNMEALocationProvider.h>
MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1, &rtc_clock);
EnvironmentSensorManager sensors = EnvironmentSensorManager(nmea);
#else
EnvironmentSensorManager sensors;
#endif
bool radio_init() {
rtc_clock.begin(Wire);
return radio.std_init(&SPI);
}
uint32_t radio_get_rng_seed() {
return radio.random(0x7FFFFFFF);
}
void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
radio.setFrequency(freq);
radio.setSpreadingFactor(sf);
radio.setBandwidth(bw);
radio.setCodingRate(cr);
}
void radio_set_tx_power(int8_t dbm) {
radio.setOutputPower(dbm);
}
mesh::LocalIdentity radio_new_identity() {
RadioNoiseListener rng(radio);
return mesh::LocalIdentity(&rng); // create new random identity
}

30
variants/gat562_30s_mesh_kit/target.h Normal file
View file

@ -0,0 +1,30 @@
#pragma once
#define RADIOLIB_STATIC_ONLY 1
#include <RadioLib.h>
#include <helpers/radiolib/RadioLibWrappers.h>
#include <GAT56230SMeshKitBoard.h>
#include <helpers/radiolib/CustomSX1262Wrapper.h>
#include <helpers/AutoDiscoverRTCClock.h>
#include <helpers/sensors/EnvironmentSensorManager.h>
#ifdef DISPLAY_CLASS
#include <helpers/ui/SSD1306Display.h>
extern DISPLAY_CLASS display;
#include <helpers/ui/MomentaryButton.h>
extern MomentaryButton user_btn;
extern MomentaryButton joystick_left;
extern MomentaryButton joystick_right;
extern MomentaryButton back_btn;
#endif
extern GAT56230SMeshKitBoard board;
extern WRAPPER_CLASS radio_driver;
extern AutoDiscoverRTCClock rtc_clock;
extern EnvironmentSensorManager sensors;
bool radio_init();
uint32_t radio_get_rng_seed();
void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
void radio_set_tx_power(int8_t dbm);
mesh::LocalIdentity radio_new_identity();

49
variants/gat562_30s_mesh_kit/variant.cpp Normal file
View file

@ -0,0 +1,49 @@
/*
Copyright (c) 2014-2015 Arduino LLC. All right reserved.
Copyright (c) 2016 Sandeep Mistry All right reserved.
Copyright (c) 2018, Adafruit Industries (adafruit.com)
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
See the GNU Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include "variant.h"
#include "wiring_constants.h"
#include "wiring_digital.h"
#include "nrf.h"
const uint32_t g_ADigitalPinMap[] =
{
// P0
0 , 1 , 2 , 3 , 4 , 5 , 6 , 7 ,
8 , 9 , 10, 11, 12, 13, 14, 15,
16, 17, 18, 19, 20, 21, 22, 23,
24, 25, 26, 27, 28, 29, 30, 31,
// P1
32, 33, 34, 35, 36, 37, 38, 39,
40, 41, 42, 43, 44, 45, 46, 47
};
void initVariant()
{
// LED1 & LED2
pinMode(PIN_LED1, OUTPUT);
ledOff(PIN_LED1);
// pinMode(PIN_LED2, OUTPUT);
// ledOff(PIN_LED2);;
}

230
variants/gat562_30s_mesh_kit/variant.h Normal file
View file

@ -0,0 +1,230 @@
/*
Copyright (c) 2014-2015 Arduino LLC. All right reserved.
Copyright (c) 2016 Sandeep Mistry All right reserved.
Copyright (c) 2018, Adafruit Industries (adafruit.com)
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
See the GNU Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef _VARIANT_RAK4630_
#define _VARIANT_RAK4630_
#define RAK4630
/** Master clock frequency */
#define VARIANT_MCK (64000000ul)
#define USE_LFXO // Board uses 32khz crystal for LF
// define USE_LFRC // Board uses RC for LF
/*----------------------------------------------------------------------------
* Headers
*----------------------------------------------------------------------------*/
#include "WVariant.h"
#ifdef __cplusplus
extern "C"
{
#endif // __cplusplus
/*
* WisBlock Base GPIO definitions
*/
static const uint8_t WB_IO1 = 17; // SLOT_A SLOT_B
static const uint8_t WB_IO2 = 34; // SLOT_A SLOT_B
static const uint8_t WB_IO3 = 21; // SLOT_C
static const uint8_t WB_IO4 = 4; // SLOT_C
static const uint8_t WB_IO5 = 9; // SLOT_D
static const uint8_t WB_IO6 = 10; // SLOT_D
static const uint8_t WB_SW1 = 33; // IO_SLOT
static const uint8_t WB_A0 = 5; // IO_SLOT
static const uint8_t WB_A1 = 31; // IO_SLOT
static const uint8_t WB_I2C1_SDA = 13; // SENSOR_SLOT IO_SLOT
static const uint8_t WB_I2C1_SCL = 14; // SENSOR_SLOT IO_SLOT
static const uint8_t WB_I2C2_SDA = 24; // IO_SLOT
static const uint8_t WB_I2C2_SCL = 25; // IO_SLOT
static const uint8_t WB_SPI_CS = 26; // IO_SLOT
static const uint8_t WB_SPI_CLK = 3; // IO_SLOT
static const uint8_t WB_SPI_MISO = 29; // IO_SLOT
static const uint8_t WB_SPI_MOSI = 30; // IO_SLOT
// Number of pins defined in PinDescription array
#define PINS_COUNT (48)
#define NUM_DIGITAL_PINS (48)
#define NUM_ANALOG_INPUTS (6)
#define NUM_ANALOG_OUTPUTS (0)
// LEDs
#define PIN_LED1 (35)
#define PIN_LED2 (36)
#define PIN_LED3 (29)
#define LED_BUILTIN PIN_LED1
#define LED_CONN PIN_LED2
#define WS2812_PIN PIN_LED3
#define LED_GREEN PIN_LED1
#define LED_BLUE PIN_LED2
#define LED_STATE_ON 1 // State when LED is litted
#define P_LORA_TX_LED LED_GREEN
/*
* Buttons
*/
#define PIN_BUTTON1 (9) // Menu / User Button
#define PIN_BUTTON2 (28) // Joystick Up
#define PIN_BUTTON3 (4) // Joystick Down
#define PIN_BUTTON4 (30) // Joystick Left
#define PIN_BUTTON5 (31) // Joystick Right
#define PIN_BUTTON6 (26) // Joystick Press
#define PIN_BACK_BTN PIN_BUTTON1
#define JOYSTICK_UP PIN_BUTTON2
#define JOYSTICK_DOWN PIN_BUTTON3
#define JOYSTICK_LEFT PIN_BUTTON4
#define JOYSTICK_RIGHT PIN_BUTTON5
#define JOYSTICK_PRESS PIN_BUTTON6
#define PIN_USER_BTN PIN_BUTTON6
/*
* Bat pins
*/
#define PIN_VBAT_READ (5)
#define ADC_MULTIPLIER (3 * 1.75 * 1.187 * 1000)
/*
* Analog pins
*/
#define PIN_A0 (5) //(3)
#define PIN_A1 (31) //(4)
#define PIN_A2 (28)
#define PIN_A3 (29)
#define PIN_A4 (30)
#define PIN_A5 (31)
#define PIN_A6 (0xff)
#define PIN_A7 (0xff)
static const uint8_t A0 = PIN_A0;
static const uint8_t A1 = PIN_A1;
static const uint8_t A2 = PIN_A2;
static const uint8_t A3 = PIN_A3;
static const uint8_t A4 = PIN_A4;
static const uint8_t A5 = PIN_A5;
static const uint8_t A6 = PIN_A6;
static const uint8_t A7 = PIN_A7;
#define ADC_RESOLUTION 14
// Power management boot protection threshold (millivolts)
// Set to 0 to disable boot protection
#define PWRMGT_VOLTAGE_BOOTLOCK 3300 // Won't boot below this voltage (mV)
// LPCOMP wake configuration (voltage recovery from SYSTEMOFF)
// AIN3 = P0.05 = PIN_A0 / PIN_VBAT_READ
#define PWRMGT_LPCOMP_AIN 3
#define PWRMGT_LPCOMP_REFSEL 4 // 5/8 VDD (~3.13-3.44V)
// Other pins
#define PIN_AREF (2)
#define PIN_NFC1 (9)
#define PIN_NFC2 (10)
static const uint8_t AREF = PIN_AREF;
/*
* Serial interfaces
*/
// TXD1 RXD1 on Base Board
#define PIN_SERIAL1_RX (15)
#define PIN_SERIAL1_TX (16)
// TXD0 RXD0 on Base Board
#define PIN_SERIAL2_RX (19)
#define PIN_SERIAL2_TX (20)
/*
* SPI Interfaces
*/
#define SPI_INTERFACES_COUNT 1
#define PIN_SPI_MISO (29)
#define PIN_SPI_MOSI (30)
#define PIN_SPI_SCK (3)
static const uint8_t SS = 26;
static const uint8_t MOSI = PIN_SPI_MOSI;
static const uint8_t MISO = PIN_SPI_MISO;
static const uint8_t SCK = PIN_SPI_SCK;
// LoRa radio module pins for RAK4631
#define SX126X_POWER_EN (37)
#define P_LORA_RESET (38)
#define P_LORA_NSS (42)
#define P_LORA_SCLK (43)
#define P_LORA_MOSI (44)
#define P_LORA_MISO (45)
#define P_LORA_BUSY (46)
#define P_LORA_DIO_1 (47)
#define SX126X_DIO2_AS_RF_SWITCH true
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
/*
* Wire Interfaces
*/
#define WIRE_INTERFACES_COUNT 2
#define PIN_WIRE_SDA (13)
#define PIN_WIRE_SCL (14)
#define PIN_WIRE1_SDA (24)
#define PIN_WIRE1_SCL (25)
// QSPI Pins
// QSPI occupied by GPIO's
#define PIN_QSPI_SCK 3 // 19
#define PIN_QSPI_CS 26 // 17
#define PIN_QSPI_IO0 30 // 20
#define PIN_QSPI_IO1 29 // 21
#define PIN_QSPI_IO2 28 // 22
#define PIN_QSPI_IO3 2 // 23
// On-board QSPI Flash
// No onboard flash
#define EXTERNAL_FLASH_DEVICES IS25LP080D
#define EXTERNAL_FLASH_USE_QSPI
#define GPS_ADDRESS 0x42 //i2c address for GPS
// GPS L76KB
#define GPS_BAUD_RATE 9600
#define GPS_THREAD_INTERVAL 50
#define PIN_GPS_TX PIN_SERIAL1_RX
#define PIN_GPS_RX PIN_SERIAL1_TX
#define PIN_GPS_EN (33)
#define PIN_GPS_PPS (17)
#ifdef __cplusplus
}
#endif
/*----------------------------------------------------------------------------
* Arduino objects - C++ only
*----------------------------------------------------------------------------*/
#endif

52
variants/gat562_mesh_evb_pro/GAT562EVBProBoard.cpp Normal file
View file

@ -0,0 +1,52 @@
#include <Arduino.h>
#include <Wire.h>
#include "GAT562EVBProBoard.h"
#ifdef NRF52_POWER_MANAGEMENT
// Static configuration for power management
// Values set in variant.h defines
const PowerMgtConfig power_config = {
.lpcomp_ain_channel = PWRMGT_LPCOMP_AIN,
.lpcomp_refsel = PWRMGT_LPCOMP_REFSEL,
.voltage_bootlock = PWRMGT_VOLTAGE_BOOTLOCK
};
void GAT562EVBProBoard::initiateShutdown(uint8_t reason) {
// Disable LoRa module power before shutdown
digitalWrite(SX126X_POWER_EN, LOW);
if (reason == SHUTDOWN_REASON_LOW_VOLTAGE ||
reason == SHUTDOWN_REASON_BOOT_PROTECT) {
configureVoltageWake(power_config.lpcomp_ain_channel, power_config.lpcomp_refsel);
}
enterSystemOff(reason);
}
#endif // NRF52_POWER_MANAGEMENT
void GAT562EVBProBoard::begin() {
NRF52BoardDCDC::begin();
pinMode(PIN_VBAT_READ, INPUT);
// Set all button pins to INPUT_PULLUP
pinMode(PIN_BUTTON1, INPUT_PULLUP);
#if defined(PIN_BOARD_SDA) && defined(PIN_BOARD_SCL)
Wire.setPins(PIN_BOARD_SDA, PIN_BOARD_SCL);
#endif
Wire.begin();
pinMode(SX126X_POWER_EN, OUTPUT);
#ifdef NRF52_POWER_MANAGEMENT
// Boot voltage protection check (may not return if voltage too low)
// We need to call this after we configure SX126X_POWER_EN as output but before we pull high
checkBootVoltage(&power_config);
#endif
digitalWrite(SX126X_POWER_EN, HIGH);
delay(10); // give sx1268 some time to power up
}

53
variants/gat562_mesh_evb_pro/GAT562EVBProBoard.h Normal file
View file

@ -0,0 +1,53 @@
#pragma once
#include <MeshCore.h>
#include <Arduino.h>
#include <helpers/NRF52Board.h>
class GAT562EVBProBoard : public NRF52BoardDCDC {
protected:
#ifdef NRF52_POWER_MANAGEMENT
void initiateShutdown(uint8_t reason) override;
#endif
public:
GAT562EVBProBoard() : NRF52Board("GAT562_OTA") {}
void begin();
#define BATTERY_SAMPLES 8
uint16_t getBattMilliVolts() override {
analogReadResolution(12);
uint32_t raw = 0;
for (int i = 0; i < BATTERY_SAMPLES; i++) {
raw += analogRead(PIN_VBAT_READ);
}
raw = raw / BATTERY_SAMPLES;
return (ADC_MULTIPLIER * raw) / 4096;
}
const char* getManufacturerName() const override {
return "GAT562 EVB Pro";
}
#if defined(P_LORA_TX_LED)
void onBeforeTransmit() override {
digitalWrite(P_LORA_TX_LED, HIGH); // turn TX LED on
}
void onAfterTransmit() override {
digitalWrite(P_LORA_TX_LED, LOW); // turn TX LED off
}
#endif
void powerOff() override {
uint32_t button_pin = PIN_BUTTON1;
nrf_gpio_cfg_input(button_pin, NRF_GPIO_PIN_PULLUP);
nrf_gpio_cfg_sense_set(button_pin, NRF_GPIO_PIN_SENSE_LOW);
sd_power_system_off();
}
};

52
variants/gat562_mesh_evb_pro/platformio.ini Normal file
View file

@ -0,0 +1,52 @@
[GAT562_Mesh_EVB_Pro]
extends = nrf52_base
board = rak4631
board_check = true
build_flags = ${nrf52_base.build_flags}
${sensor_base.build_flags}
-I variants/gat562_mesh_evb_pro
-D NRF52_POWER_MANAGEMENT
-D PIN_BOARD_SCL=14
-D PIN_BOARD_SDA=13
-D RADIO_CLASS=CustomSX1262
-D WRAPPER_CLASS=CustomSX1262Wrapper
-D LORA_TX_POWER=22
-D SX126X_CURRENT_LIMIT=140
-D SX126X_RX_BOOSTED_GAIN=1
build_src_filter = ${nrf52_base.build_src_filter}
+<../variants/gat562_mesh_evb_pro>
+<helpers/ui/MomentaryButton.cpp>
+<helpers/sensors>
lib_deps =
${nrf52_base.lib_deps}
${sensor_base.lib_deps}
sparkfun/SparkFun u-blox GNSS Arduino Library@^2.2.27
[env:GAT562_Mesh_EVB_Pro_repeater]
extends = GAT562_Mesh_EVB_Pro
build_flags =
${GAT562_Mesh_EVB_Pro.build_flags}
-D ADVERT_NAME='"GAT562 EVB Pro Repeater"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D MAX_NEIGHBOURS=50
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${GAT562_Mesh_EVB_Pro.build_src_filter}
+<../examples/simple_repeater>
[env:GAT562_Mesh_EVB_Pro_room_server]
extends = GAT562_Mesh_EVB_Pro
build_flags =
${GAT562_Mesh_EVB_Pro.build_flags}
-D ADVERT_NAME='"GAT562 EVB Pro Room Server"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D ROOM_PASSWORD='"hello"'
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${GAT562_Mesh_EVB_Pro.build_src_filter}
+<../examples/simple_room_server>

58
variants/gat562_mesh_evb_pro/target.cpp Normal file
View file

@ -0,0 +1,58 @@
#include <Arduino.h>
#include "target.h"
#include <helpers/ArduinoHelpers.h>
GAT562EVBProBoard board;
#ifndef PIN_USER_BTN
#define PIN_USER_BTN (-1)
#endif
#ifdef DISPLAY_CLASS
DISPLAY_CLASS display;
MomentaryButton user_btn(PIN_USER_BTN, 1000, true, false, false);
MomentaryButton back_btn(PIN_BACK_BTN, 1000, true, false, true);
#endif
RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, SPI);
WRAPPER_CLASS radio_driver(radio, board);
VolatileRTCClock fallback_clock;
AutoDiscoverRTCClock rtc_clock(fallback_clock);
#if ENV_INCLUDE_GPS
#include <helpers/sensors/MicroNMEALocationProvider.h>
MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1, &rtc_clock);
EnvironmentSensorManager sensors = EnvironmentSensorManager(nmea);
#else
EnvironmentSensorManager sensors;
#endif
bool radio_init() {
rtc_clock.begin(Wire);
return radio.std_init(&SPI);
}
uint32_t radio_get_rng_seed() {
return radio.random(0x7FFFFFFF);
}
void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
radio.setFrequency(freq);
radio.setSpreadingFactor(sf);
radio.setBandwidth(bw);
radio.setCodingRate(cr);
}
void radio_set_tx_power(int8_t dbm) {
radio.setOutputPower(dbm);
}
mesh::LocalIdentity radio_new_identity() {
RadioNoiseListener rng(radio);
return mesh::LocalIdentity(&rng); // create new random identity
}

29
variants/gat562_mesh_evb_pro/target.h Normal file
View file

@ -0,0 +1,29 @@
#pragma once
#define RADIOLIB_STATIC_ONLY 1
#include <RadioLib.h>
#include <helpers/radiolib/RadioLibWrappers.h>
#include <GAT562EVBProBoard.h>
#include <helpers/radiolib/CustomSX1262Wrapper.h>
#include <helpers/AutoDiscoverRTCClock.h>
#include <helpers/sensors/EnvironmentSensorManager.h>
#ifdef DISPLAY_CLASS
#include <helpers/ui/SSD1306Display.h>
extern DISPLAY_CLASS display;
#include <helpers/ui/MomentaryButton.h>
extern MomentaryButton user_btn;
extern MomentaryButton back_btn;
#endif
extern GAT562EVBProBoard board;
extern WRAPPER_CLASS radio_driver;
extern AutoDiscoverRTCClock rtc_clock;
extern EnvironmentSensorManager sensors;
bool radio_init();
uint32_t radio_get_rng_seed();
void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
void radio_set_tx_power(int8_t dbm);
mesh::LocalIdentity radio_new_identity();

49
variants/gat562_mesh_evb_pro/variant.cpp Normal file
View file

@ -0,0 +1,49 @@
/*
Copyright (c) 2014-2015 Arduino LLC. All right reserved.
Copyright (c) 2016 Sandeep Mistry All right reserved.
Copyright (c) 2018, Adafruit Industries (adafruit.com)
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
See the GNU Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include "variant.h"
#include "wiring_constants.h"
#include "wiring_digital.h"
#include "nrf.h"
const uint32_t g_ADigitalPinMap[] =
{
// P0
0 , 1 , 2 , 3 , 4 , 5 , 6 , 7 ,
8 , 9 , 10, 11, 12, 13, 14, 15,
16, 17, 18, 19, 20, 21, 22, 23,
24, 25, 26, 27, 28, 29, 30, 31,
// P1
32, 33, 34, 35, 36, 37, 38, 39,
40, 41, 42, 43, 44, 45, 46, 47
};
void initVariant()
{
// LED1 & LED2
pinMode(PIN_LED1, OUTPUT);
ledOff(PIN_LED1);
// pinMode(PIN_LED2, OUTPUT);
// ledOff(PIN_LED2);;
}

216
variants/gat562_mesh_evb_pro/variant.h Normal file
View file

@ -0,0 +1,216 @@
/*
Copyright (c) 2014-2015 Arduino LLC. All right reserved.
Copyright (c) 2016 Sandeep Mistry All right reserved.
Copyright (c) 2018, Adafruit Industries (adafruit.com)
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
See the GNU Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef _VARIANT_RAK4630_
#define _VARIANT_RAK4630_
#define RAK4630
/** Master clock frequency */
#define VARIANT_MCK (64000000ul)
#define USE_LFXO // Board uses 32khz crystal for LF
// define USE_LFRC // Board uses RC for LF
/*----------------------------------------------------------------------------
* Headers
*----------------------------------------------------------------------------*/
#include "WVariant.h"
#ifdef __cplusplus
extern "C"
{
#endif // __cplusplus
/*
* WisBlock Base GPIO definitions
*/
static const uint8_t WB_IO1 = 17; // SLOT_A SLOT_B
static const uint8_t WB_IO2 = 34; // SLOT_A SLOT_B
static const uint8_t WB_IO3 = 21; // SLOT_C
static const uint8_t WB_IO4 = 4; // SLOT_C
static const uint8_t WB_IO5 = 9; // SLOT_D
static const uint8_t WB_IO6 = 10; // SLOT_D
static const uint8_t WB_SW1 = 33; // IO_SLOT
static const uint8_t WB_A0 = 5; // IO_SLOT
static const uint8_t WB_A1 = 31; // IO_SLOT
static const uint8_t WB_I2C1_SDA = 13; // SENSOR_SLOT IO_SLOT
static const uint8_t WB_I2C1_SCL = 14; // SENSOR_SLOT IO_SLOT
static const uint8_t WB_I2C2_SDA = 24; // IO_SLOT
static const uint8_t WB_I2C2_SCL = 25; // IO_SLOT
static const uint8_t WB_SPI_CS = 26; // IO_SLOT
static const uint8_t WB_SPI_CLK = 3; // IO_SLOT
static const uint8_t WB_SPI_MISO = 29; // IO_SLOT
static const uint8_t WB_SPI_MOSI = 30; // IO_SLOT
// Number of pins defined in PinDescription array
#define PINS_COUNT (48)
#define NUM_DIGITAL_PINS (48)
#define NUM_ANALOG_INPUTS (6)
#define NUM_ANALOG_OUTPUTS (0)
// LEDs
#define PIN_LED1 (35)
#define PIN_LED2 (36)
#define LED_BUILTIN PIN_LED1
#define LED_CONN PIN_LED2
#define LED_GREEN PIN_LED1
#define LED_BLUE PIN_LED2
#define LED_STATE_ON 1 // State when LED is litted
// #define P_LORA_TX_LED LED_GREEN
/*
* Buttons
*/
#define PIN_BUTTON1 (9) // Menu / User Button
#define PIN_BACK_BTN PIN_BUTTON1
#define PIN_USER_BTN PIN_BUTTON1
// Analog pins
#define PIN_VBAT_READ (5)
#define ADC_MULTIPLIER (3 * 1.75 * 1.187 * 1000)
/*
* Analog pins
*/
#define PIN_A0 (5) //(3)
#define PIN_A1 (31) //(4)
#define PIN_A2 (28)
#define PIN_A3 (29)
#define PIN_A4 (30)
#define PIN_A5 (31)
#define PIN_A6 (0xff)
#define PIN_A7 (0xff)
static const uint8_t A0 = PIN_A0;
static const uint8_t A1 = PIN_A1;
static const uint8_t A2 = PIN_A2;
static const uint8_t A3 = PIN_A3;
static const uint8_t A4 = PIN_A4;
static const uint8_t A5 = PIN_A5;
static const uint8_t A6 = PIN_A6;
static const uint8_t A7 = PIN_A7;
#define ADC_RESOLUTION 14
// Power management boot protection threshold (millivolts)
// Set to 0 to disable boot protection
#define PWRMGT_VOLTAGE_BOOTLOCK 3300 // Won't boot below this voltage (mV)
// LPCOMP wake configuration (voltage recovery from SYSTEMOFF)
// AIN3 = P0.05 = PIN_A0 / PIN_VBAT_READ
#define PWRMGT_LPCOMP_AIN 3
#define PWRMGT_LPCOMP_REFSEL 4 // 5/8 VDD (~3.13-3.44V)
// Other pins
#define PIN_AREF (2)
#define PIN_NFC1 (9)
#define PIN_NFC2 (10)
static const uint8_t AREF = PIN_AREF;
/*
* Serial interfaces
*/
// TXD1 RXD1 on Base Board
#define PIN_SERIAL1_RX (15)
#define PIN_SERIAL1_TX (16)
// TXD0 RXD0 on Base Board
#define PIN_SERIAL2_RX (19)
#define PIN_SERIAL2_TX (20)
/*
* SPI Interfaces
*/
#define SPI_INTERFACES_COUNT 1
#define PIN_SPI_MISO (29)
#define PIN_SPI_MOSI (30)
#define PIN_SPI_SCK (3)
static const uint8_t SS = 26;
static const uint8_t MOSI = PIN_SPI_MOSI;
static const uint8_t MISO = PIN_SPI_MISO;
static const uint8_t SCK = PIN_SPI_SCK;
// LoRa radio module pins for RAK4631
#define SX126X_POWER_EN (37)
#define P_LORA_RESET (38)
#define P_LORA_NSS (42)
#define P_LORA_SCLK (43)
#define P_LORA_MOSI (44)
#define P_LORA_MISO (45)
#define P_LORA_BUSY (46)
#define P_LORA_DIO_1 (47)
#define SX126X_DIO2_AS_RF_SWITCH true
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
/*
* Wire Interfaces
*/
#define WIRE_INTERFACES_COUNT 2
#define PIN_WIRE_SDA (13)
#define PIN_WIRE_SCL (14)
#define PIN_WIRE1_SDA (24)
#define PIN_WIRE1_SCL (25)
// QSPI Pins
// QSPI occupied by GPIO's
#define PIN_QSPI_SCK 3 // 19
#define PIN_QSPI_CS 26 // 17
#define PIN_QSPI_IO0 30 // 20
#define PIN_QSPI_IO1 29 // 21
#define PIN_QSPI_IO2 28 // 22
#define PIN_QSPI_IO3 2 // 23
// On-board QSPI Flash
// No onboard flash
#define EXTERNAL_FLASH_DEVICES IS25LP080D
#define EXTERNAL_FLASH_USE_QSPI
#define GPS_ADDRESS 0x42 //i2c address for GPS
// GPS L76KB
#define GPS_BAUD_RATE 9600
#define GPS_THREAD_INTERVAL 50
#define PIN_GPS_TX PIN_SERIAL1_RX
#define PIN_GPS_RX PIN_SERIAL1_TX
#define PIN_GPS_EN (33)
#define PIN_GPS_PPS (17)
#ifdef __cplusplus
}
#endif
/*----------------------------------------------------------------------------
* Arduino objects - C++ only
*----------------------------------------------------------------------------*/
#endif

2
variants/gat562_mesh_tracker_pro/GAT562MeshTrackerProBoard.cpp
View file

@ -53,5 +53,5 @@ void GAT562MeshTrackerProBoard::begin() {
checkBootVoltage(&power_config);
#endif
digitalWrite(SX126X_POWER_EN, HIGH);
delay(10); // give sx1268 some time to power up
delay(10); // give sx1262 some time to power up
}

6
variants/gat562_mesh_tracker_pro/platformio.ini
View file

@ -5,13 +5,7 @@ board_check = true
build_flags = ${nrf52_base.build_flags}
${sensor_base.build_flags}
-I variants/gat562_mesh_tracker_pro
-D RAK_4631
-D RAK_BOARD
-D NRF52_POWER_MANAGEMENT
-D LORA_FREQ=475
-D LORA_BW=125
-D LORA_SF=10
-D LORA_CR=6
-D PIN_BOARD_SCL=14
-D PIN_BOARD_SDA=13
-D PIN_OLED_RESET=-1

46
variants/gat562_mesh_watch13/GAT56MeshWatch13Board.cpp Normal file
View file

@ -0,0 +1,46 @@
#include <Arduino.h>
#include <Wire.h>
#include "GAT56MeshWatch13Board.h"
#ifdef NRF52_POWER_MANAGEMENT
// Static configuration for power management
// Values set in variant.h defines
const PowerMgtConfig power_config = {
.lpcomp_ain_channel = PWRMGT_LPCOMP_AIN,
.lpcomp_refsel = PWRMGT_LPCOMP_REFSEL,
.voltage_bootlock = PWRMGT_VOLTAGE_BOOTLOCK
};
void GAT56MeshWatch13Board::initiateShutdown(uint8_t reason) {
if (reason == SHUTDOWN_REASON_LOW_VOLTAGE ||
reason == SHUTDOWN_REASON_BOOT_PROTECT) {
configureVoltageWake(power_config.lpcomp_ain_channel, power_config.lpcomp_refsel);
}
enterSystemOff(reason);
}
#endif // NRF52_POWER_MANAGEMENT
void GAT56MeshWatch13Board::begin() {
NRF52BoardDCDC::begin();
pinMode(PIN_VBAT_READ, INPUT);
#if defined(PIN_BOARD_SDA) && defined(PIN_BOARD_SCL)
Wire.setPins(PIN_BOARD_SDA, PIN_BOARD_SCL);
#endif
Wire.begin();
pinMode(SX126X_POWER_EN, OUTPUT);
#ifdef NRF52_POWER_MANAGEMENT
// Boot voltage protection check (may not return if voltage too low)
// We need to call this after we configure SX126X_POWER_EN as output but before we pull high
checkBootVoltage(&power_config);
#endif
digitalWrite(SX126X_POWER_EN, HIGH);
delay(10); // give sx1262 some time to power up
}

44
variants/gat562_mesh_watch13/GAT56MeshWatch13Board.h Normal file
View file

@ -0,0 +1,44 @@
#pragma once
#include <MeshCore.h>
#include <Arduino.h>
#include <helpers/NRF52Board.h>
class GAT56MeshWatch13Board : public NRF52BoardDCDC {
protected:
#ifdef NRF52_POWER_MANAGEMENT
void initiateShutdown(uint8_t reason) override;
#endif
public:
GAT56MeshWatch13Board() : NRF52Board("GAT562_OTA") {}
void begin();
#define BATTERY_SAMPLES 8
uint16_t getBattMilliVolts() override {
analogReadResolution(12);
uint32_t raw = 0;
for (int i = 0; i < BATTERY_SAMPLES; i++) {
raw += analogRead(PIN_VBAT_READ);
}
raw = raw / BATTERY_SAMPLES;
return (ADC_MULTIPLIER * raw) / 4096;
}
const char* getManufacturerName() const override {
return "GAT562 Mesh Watch 13";
}
void powerOff() override {
uint32_t button_pin = PIN_BUTTON1;
nrf_gpio_cfg_input(button_pin, NRF_GPIO_PIN_PULLUP);
nrf_gpio_cfg_sense_set(button_pin, NRF_GPIO_PIN_SENSE_LOW);
sd_power_system_off();
}
};

89
variants/gat562_mesh_watch13/platformio.ini Normal file
View file

@ -0,0 +1,89 @@
[GAT562_Mesh_Watch13]
extends = nrf52_base
board = rak4631
board_check = true
build_flags = ${nrf52_base.build_flags}
${sensor_base.build_flags}
-UENV_INCLUDE_GPS
-I variants/gat562_mesh_watch13
-D RAK_4631
-D RAK_BOARD
-D NRF52_POWER_MANAGEMENT
-D PIN_BOARD_SCL=14
-D PIN_BOARD_SDA=13
-D PIN_OLED_RESET=-1
-D RADIO_CLASS=CustomSX1262
-D WRAPPER_CLASS=CustomSX1262Wrapper
-D LORA_TX_POWER=19
-D SX126X_CURRENT_LIMIT=140
-D SX126X_RX_BOOSTED_GAIN=1
-D QSPIFLASH=1
build_src_filter = ${nrf52_base.build_src_filter}
+<../variants/gat562_mesh_watch13>
+<helpers/ui/SSD1306Display.cpp>
+<helpers/ui/MomentaryButton.cpp>
+<helpers/sensors>
lib_deps =
${nrf52_base.lib_deps}
${sensor_base.lib_deps}
adafruit/Adafruit SSD1306 @ ^2.5.13
;[env:GAT562_Mesh_Watch13_repeater]
;extends = GAT562_Mesh_Watch13
;build_flags =
; ${GAT562_Mesh_Watch13.build_flags}
; -D DISPLAY_CLASS=SSD1306Display
; -D ADVERT_NAME='"GAT562 Repeater"'
; -D ADVERT_LAT=0.0
; -D ADVERT_LON=0.0
; -D ADMIN_PASSWORD='"password"'
; -D MAX_NEIGHBOURS=50
;; -D MESH_PACKET_LOGGING=1
;; -D MESH_DEBUG=1
;build_src_filter = ${GAT562_Mesh_Watch13.build_src_filter}
; +<helpers/ui/SSD1306Display.cpp>
; +<../examples/simple_repeater>
;[env:GAT562_Mesh_Watch13_room_server]
;extends = GAT562_Mesh_Watch13
;build_flags =
; ${GAT562_Mesh_Watch13.build_flags}
; -D DISPLAY_CLASS=SSD1306Display
; -D ADVERT_NAME='"GAT562 Room"'
; -D ADVERT_LAT=0.0
; -D ADVERT_LON=0.0
; -D ADMIN_PASSWORD='"password"'
; -D ROOM_PASSWORD='"hello"'
;; -D MESH_PACKET_LOGGING=1
;; -D MESH_DEBUG=1
;build_src_filter = ${GAT562_Mesh_Watch13.build_src_filter}
; +<helpers/ui/SSD1306Display.cpp>
; +<../examples/simple_room_server>
[env:GAT562_Mesh_Watch13_companion_radio_ble]
extends = GAT562_Mesh_Watch13
board_build.ldscript = boards/nrf52840_s140_v6_extrafs.ld
board_upload.maximum_size = 712704
build_flags =
${GAT562_Mesh_Watch13.build_flags}
-I examples/companion_radio/ui-new
-D DISPLAY_CLASS=SSD1306Display
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
-D BLE_PIN_CODE=123456
-D BLE_DEBUG_LOGGING=1
-D OFFLINE_QUEUE_SIZE=256
; -D PIN_VIBRATION=36
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${GAT562_Mesh_Watch13.build_src_filter}
+<helpers/nrf52/SerialBLEInterface.cpp>
+<helpers/ui/MomentaryButton.cpp>
+<helpers/ui/GenericVibration.cpp>
+<../examples/companion_radio/*.cpp>
+<../examples/companion_radio/ui-new/*.cpp>
lib_deps =
${GAT562_Mesh_Watch13.lib_deps}
densaugeo/base64 @ ~1.4.0

50
variants/gat562_mesh_watch13/target.cpp Normal file
View file

@ -0,0 +1,50 @@
#include <Arduino.h>
#include "target.h"
#include <helpers/ArduinoHelpers.h>
GAT56MeshWatch13Board board;
#ifndef PIN_USER_BTN
#define PIN_USER_BTN (-1)
#endif
#ifdef DISPLAY_CLASS
DISPLAY_CLASS display;
MomentaryButton user_btn(PIN_USER_BTN, 1000, true, false, true);
#endif
RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, SPI);
WRAPPER_CLASS radio_driver(radio, board);
VolatileRTCClock fallback_clock;
AutoDiscoverRTCClock rtc_clock(fallback_clock);
EnvironmentSensorManager sensors;
bool radio_init() {
rtc_clock.begin(Wire);
return radio.std_init(&SPI);
}
uint32_t radio_get_rng_seed() {
return radio.random(0x7FFFFFFF);
}
void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
radio.setFrequency(freq);
radio.setSpreadingFactor(sf);
radio.setBandwidth(bw);
radio.setCodingRate(cr);
}
void radio_set_tx_power(int8_t dbm) {
radio.setOutputPower(dbm);
}
mesh::LocalIdentity radio_new_identity() {
RadioNoiseListener rng(radio);
return mesh::LocalIdentity(&rng); // create new random identity
}

31
variants/gat562_mesh_watch13/target.h Normal file
View file

@ -0,0 +1,31 @@
#pragma once
#define RADIOLIB_STATIC_ONLY 1
#include <RadioLib.h>
#include <helpers/radiolib/RadioLibWrappers.h>
#include <GAT56MeshWatch13Board.h>
#include <helpers/radiolib/CustomSX1262Wrapper.h>
#include <helpers/AutoDiscoverRTCClock.h>
#include <helpers/sensors/EnvironmentSensorManager.h>
#ifdef DISPLAY_CLASS
#include <helpers/ui/SSD1306Display.h>
extern DISPLAY_CLASS display;
#include <helpers/ui/MomentaryButton.h>
extern MomentaryButton user_btn;
#endif
#ifdef PIN_VIBRATION
#include <helpers/ui/GenericVibration.h>
#endif
extern GAT56MeshWatch13Board board;
extern WRAPPER_CLASS radio_driver;
extern AutoDiscoverRTCClock rtc_clock;
extern EnvironmentSensorManager sensors;
bool radio_init();
uint32_t radio_get_rng_seed();
void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
void radio_set_tx_power(int8_t dbm);
mesh::LocalIdentity radio_new_identity();

44
variants/gat562_mesh_watch13/variant.cpp Normal file
View file

@ -0,0 +1,44 @@
/*
Copyright (c) 2014-2015 Arduino LLC. All right reserved.
Copyright (c) 2016 Sandeep Mistry All right reserved.
Copyright (c) 2018, Adafruit Industries (adafruit.com)
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
See the GNU Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include "variant.h"
#include "wiring_constants.h"
#include "wiring_digital.h"
#include "nrf.h"
const uint32_t g_ADigitalPinMap[] =
{
// P0
0 , 1 , 2 , 3 , 4 , 5 , 6 , 7 ,
8 , 9 , 10, 11, 12, 13, 14, 15,
16, 17, 18, 19, 20, 21, 22, 23,
24, 25, 26, 27, 28, 29, 30, 31,
// P1
32, 33, 34, 35, 36, 37, 38, 39,
40, 41, 42, 43, 44, 45, 46, 47
};
void initVariant()
{
}

201
variants/gat562_mesh_watch13/variant.h Normal file
View file

@ -0,0 +1,201 @@
/*
Copyright (c) 2014-2015 Arduino LLC. All right reserved.
Copyright (c) 2016 Sandeep Mistry All right reserved.
Copyright (c) 2018, Adafruit Industries (adafruit.com)
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
See the GNU Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef _VARIANT_RAK4630_
#define _VARIANT_RAK4630_
#define RAK4630
/** Master clock frequency */
#define VARIANT_MCK (64000000ul)
#define USE_LFXO // Board uses 32khz crystal for LF
// define USE_LFRC // Board uses RC for LF
/*----------------------------------------------------------------------------
* Headers
*----------------------------------------------------------------------------*/
#include "WVariant.h"
#ifdef __cplusplus
extern "C"
{
#endif // __cplusplus
/*
* WisBlock Base GPIO definitions
*/
static const uint8_t WB_IO1 = 17; // SLOT_A SLOT_B
static const uint8_t WB_IO2 = 34; // SLOT_A SLOT_B
static const uint8_t WB_IO3 = 21; // SLOT_C
static const uint8_t WB_IO4 = 4; // SLOT_C
static const uint8_t WB_IO5 = 9; // SLOT_D
static const uint8_t WB_IO6 = 10; // SLOT_D
static const uint8_t WB_SW1 = 33; // IO_SLOT
static const uint8_t WB_A0 = 5; // IO_SLOT
static const uint8_t WB_A1 = 31; // IO_SLOT
static const uint8_t WB_I2C1_SDA = 13; // SENSOR_SLOT IO_SLOT
static const uint8_t WB_I2C1_SCL = 14; // SENSOR_SLOT IO_SLOT
static const uint8_t WB_I2C2_SDA = 24; // IO_SLOT
static const uint8_t WB_I2C2_SCL = 25; // IO_SLOT
static const uint8_t WB_SPI_CS = 26; // IO_SLOT
static const uint8_t WB_SPI_CLK = 3; // IO_SLOT
static const uint8_t WB_SPI_MISO = 29; // IO_SLOT
static const uint8_t WB_SPI_MOSI = 30; // IO_SLOT
// Number of pins defined in PinDescription array
#define PINS_COUNT (48)
#define NUM_DIGITAL_PINS (48)
#define NUM_ANALOG_INPUTS (6)
#define NUM_ANALOG_OUTPUTS (0)
// LEDs
#define PIN_LED (-1)
#define LED_BUILTIN PIN_LED
#define LED_CONN PIN_LED
#define LED_GREEN PIN_LED
#define LED_BLUE PIN_LED
#define LED_STATE_ON 1 // State when LED is litted
/*
* Buttons
*/
#define PIN_BUTTON1 (9)
#define PIN_BUTTON2 (10)
#define PIN_USER_BTN PIN_BUTTON1
#define PIN_BACK_BTN PIN_BUTTON2
// Analog pins
#define PIN_VBAT_READ (5)
#define ADC_MULTIPLIER (3 * 1.75 * 1.187 * 1000)
/*
* Analog pins
*/
#define PIN_A0 (5) //(3)
#define PIN_A1 (31) //(4)
#define PIN_A2 (28)
#define PIN_A3 (29)
#define PIN_A4 (30)
#define PIN_A5 (31)
#define PIN_A6 (0xff)
#define PIN_A7 (0xff)
static const uint8_t A0 = PIN_A0;
static const uint8_t A1 = PIN_A1;
static const uint8_t A2 = PIN_A2;
static const uint8_t A3 = PIN_A3;
static const uint8_t A4 = PIN_A4;
static const uint8_t A5 = PIN_A5;
static const uint8_t A6 = PIN_A6;
static const uint8_t A7 = PIN_A7;
#define ADC_RESOLUTION 14
// Power management boot protection threshold (millivolts)
// Set to 0 to disable boot protection
#define PWRMGT_VOLTAGE_BOOTLOCK 3300 // Won't boot below this voltage (mV)
// LPCOMP wake configuration (voltage recovery from SYSTEMOFF)
// AIN3 = P0.05 = PIN_A0 / PIN_VBAT_READ
#define PWRMGT_LPCOMP_AIN 3
#define PWRMGT_LPCOMP_REFSEL 4 // 5/8 VDD (~3.13-3.44V)
// Other pins
#define PIN_AREF (2)
#define PIN_NFC1 (9)
#define PIN_NFC2 (10)
static const uint8_t AREF = PIN_AREF;
/*
* Serial interfaces
*/
// TXD1 RXD1 on Base Board
#define PIN_SERIAL1_RX (15)
#define PIN_SERIAL1_TX (16)
// TXD0 RXD0 on Base Board
#define PIN_SERIAL2_RX (19)
#define PIN_SERIAL2_TX (20)
/*
* SPI Interfaces
*/
#define SPI_INTERFACES_COUNT 1
#define PIN_SPI_MISO (29)
#define PIN_SPI_MOSI (30)
#define PIN_SPI_SCK (3)
static const uint8_t SS = 26;
static const uint8_t MOSI = PIN_SPI_MOSI;
static const uint8_t MISO = PIN_SPI_MISO;
static const uint8_t SCK = PIN_SPI_SCK;
// LoRa radio module pins for RAK4631
#define SX126X_POWER_EN (37)
#define P_LORA_RESET (38)
#define P_LORA_NSS (42)
#define P_LORA_SCLK (43)
#define P_LORA_MOSI (44)
#define P_LORA_MISO (45)
#define P_LORA_BUSY (46)
#define P_LORA_DIO_1 (47)
#define SX126X_DIO2_AS_RF_SWITCH true
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
/*
* Wire Interfaces
*/
#define WIRE_INTERFACES_COUNT 2
#define PIN_WIRE_SDA (13)
#define PIN_WIRE_SCL (14)
#define PIN_WIRE1_SDA (24)
#define PIN_WIRE1_SCL (25)
// QSPI Pins
// QSPI occupied by GPIO's
#define PIN_QSPI_SCK 3 // 19
#define PIN_QSPI_CS 26 // 17
#define PIN_QSPI_IO0 30 // 20
#define PIN_QSPI_IO1 29 // 21
#define PIN_QSPI_IO2 28 // 22
#define PIN_QSPI_IO3 2 // 23
// On-board QSPI Flash
#define EXTERNAL_FLASH_DEVICES W25Q16JV_IQ
#define EXTERNAL_FLASH_USE_QSPI
#ifdef __cplusplus
}
#endif
/*----------------------------------------------------------------------------
* Arduino objects - C++ only
*----------------------------------------------------------------------------*/
#endif

1
variants/generic-e22/target.cpp
View file

@ -46,3 +46,4 @@ mesh::LocalIdentity radio_new_identity() {
RadioNoiseListener rng(radio);
return mesh::LocalIdentity(&rng); // create new random identity
}

1
variants/generic-e22/target.h
View file

@ -19,3 +19,4 @@ uint32_t radio_get_rng_seed();
void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
void radio_set_tx_power(int8_t dbm);
mesh::LocalIdentity radio_new_identity();

2
variants/generic_espnow/platformio.ini
View file

@ -69,7 +69,7 @@ lib_deps =
extends = Generic_ESPNOW
build_flags =
${Generic_ESPNOW.build_flags}
-D ADVERT_NAME='"Heltec Room"'
-D ADVERT_NAME='"Generic ESPNow Room"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'

1
variants/heltec_ct62/platformio.ini
View file

@ -5,6 +5,7 @@ build_flags =
${esp32_base.build_flags}
-I variants/heltec_ct62
-D HELTEC_HT_CT62=1
-D USE_SX1262
-D RADIO_CLASS=CustomSX1262
-D WRAPPER_CLASS=CustomSX1262Wrapper
-D ESP32_CPU_FREQ=80

2
variants/heltec_ct62/target.cpp
View file

@ -34,4 +34,4 @@ void radio_set_tx_power(int8_t dbm) {
mesh::LocalIdentity radio_new_identity() {
RadioNoiseListener rng(radio);
return mesh::LocalIdentity(&rng); // create new random identity
}
}

2
variants/heltec_ct62/target.h
View file

@ -17,4 +17,4 @@ bool radio_init();
uint32_t radio_get_rng_seed();
void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
void radio_set_tx_power(int8_t dbm);
mesh::LocalIdentity radio_new_identity();
mesh::LocalIdentity radio_new_identity();

21
variants/heltec_e213/platformio.ini
View file

@ -6,6 +6,7 @@ build_flags =
-I variants/heltec_e213
-D Vision_Master_E213
-D ARDUINO_USB_CDC_ON_BOOT=1
-D USE_SX1262
-D RADIO_CLASS=CustomSX1262
-D WRAPPER_CLASS=CustomSX1262Wrapper
-D P_LORA_DIO_1=14
@ -40,7 +41,7 @@ lib_deps =
${esp32_base.lib_deps}
https://github.com/Quency-D/heltec-eink-modules/archive/563dd41fd850a1bc3039b8723da4f3a20fe1c800.zip
[env:Heltec_E213_companion_radio_ble_]
[env:Heltec_E213_companion_radio_ble]
extends = Heltec_E213_base
build_flags =
${Heltec_E213_base.build_flags}
@ -48,6 +49,7 @@ build_flags =
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
-D DISPLAY_CLASS=E213Display
-D AUTO_OFF_MILLIS=0
-D BLE_PIN_CODE=123456 ; dynamic, random PIN
-D BLE_DEBUG_LOGGING=1
-D OFFLINE_QUEUE_SIZE=256
@ -59,8 +61,9 @@ build_src_filter = ${Heltec_E213_base.build_src_filter}
lib_deps =
${Heltec_E213_base.lib_deps}
densaugeo/base64 @ ~1.4.0
bakercp/CRC32 @ ^2.0.0
[env:Heltec_E213_companion_radio_usb_]
[env:Heltec_E213_companion_radio_usb]
extends = Heltec_E213_base
build_flags =
${Heltec_E213_base.build_flags}
@ -68,6 +71,7 @@ build_flags =
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
-D DISPLAY_CLASS=E213Display
-D AUTO_OFF_MILLIS=0
-D OFFLINE_QUEUE_SIZE=256
build_src_filter = ${Heltec_E213_base.build_src_filter}
+<helpers/ui/E213Display.cpp>
@ -77,8 +81,9 @@ build_src_filter = ${Heltec_E213_base.build_src_filter}
lib_deps =
${Heltec_E213_base.lib_deps}
densaugeo/base64 @ ~1.4.0
bakercp/CRC32 @ ^2.0.0
[env:Heltec_E213_repeater_]
[env:Heltec_E213_repeater]
extends = Heltec_E213_base
build_flags =
${Heltec_E213_base.build_flags}
@ -94,8 +99,9 @@ build_src_filter = ${Heltec_E213_base.build_src_filter}
lib_deps =
${Heltec_E213_base.lib_deps}
${esp32_ota.lib_deps}
bakercp/CRC32 @ ^2.0.0
; [env:Heltec_E213_repeater_bridge_rs232_]
; [env:Heltec_E213_repeater_bridge_rs232]
; extends = Heltec_E213_base
; build_flags =
; ${Heltec_E213_base.build_flags}
@ -118,8 +124,9 @@ lib_deps =
; lib_deps =
; ${Heltec_E213_base.lib_deps}
; ${esp32_ota.lib_deps}
; bakercp/CRC32 @ ^2.0.0
[env:Heltec_E213_repeater_bridge_espnow_]
[env:Heltec_E213_repeater_bridge_espnow]
extends = Heltec_E213_base
build_flags =
${Heltec_E213_base.build_flags}
@ -140,8 +147,9 @@ build_src_filter = ${Heltec_E213_base.build_src_filter}
lib_deps =
${Heltec_E213_base.lib_deps}
${esp32_ota.lib_deps}
bakercp/CRC32 @ ^2.0.0
[env:Heltec_E213_room_server_]
[env:Heltec_E213_room_server]
extends = Heltec_E213_base
build_flags =
${Heltec_E213_base.build_flags}
@ -157,3 +165,4 @@ build_src_filter = ${Heltec_E213_base.build_src_filter}
lib_deps =
${Heltec_E213_base.lib_deps}
${esp32_ota.lib_deps}
bakercp/CRC32 @ ^2.0.0

2
variants/heltec_e213/target.cpp
View file

@ -18,7 +18,7 @@ AutoDiscoverRTCClock rtc_clock(fallback_clock);
SensorManager sensors;
#ifdef DISPLAY_CLASS
DISPLAY_CLASS display;
DISPLAY_CLASS display(&board.periph_power);
MomentaryButton user_btn(PIN_USER_BTN, 1000, true);
#endif

2
variants/heltec_e213/target.h
View file

@ -26,4 +26,4 @@ bool radio_init();
uint32_t radio_get_rng_seed();
void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
void radio_set_tx_power(int8_t dbm);
mesh::LocalIdentity radio_new_identity();
mesh::LocalIdentity radio_new_identity();

2
variants/heltec_e290/HeltecE290Board.h
View file

@ -10,7 +10,7 @@ class HeltecE290Board : public ESP32Board {
public:
RefCountedDigitalPin periph_power;
HeltecE290Board() : periph_power(PIN_VEXT_EN) { }
HeltecE290Board() : periph_power(PIN_VEXT_EN, PIN_VEXT_EN_ACTIVE) { }
void begin();
void enterDeepSleep(uint32_t secs, int pin_wake_btn = -1);

21
variants/heltec_e290/platformio.ini
View file

@ -6,6 +6,7 @@ build_flags =
-I variants/heltec_e290
-D Vision_Master_E290
-D ARDUINO_USB_CDC_ON_BOOT=1
-D USE_SX1262
-D RADIO_CLASS=CustomSX1262
-D WRAPPER_CLASS=CustomSX1262Wrapper
-D LORA_TX_POWER=22
@ -34,7 +35,7 @@ lib_deps =
${esp32_base.lib_deps}
https://github.com/Quency-D/heltec-eink-modules/archive/563dd41fd850a1bc3039b8723da4f3a20fe1c800.zip
[env:Heltec_E290_companion_ble_]
[env:Heltec_E290_companion_ble]
extends = Heltec_E290_base
build_flags =
${Heltec_E290_base.build_flags}
@ -42,6 +43,7 @@ build_flags =
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
-D DISPLAY_CLASS=E290Display
-D AUTO_OFF_MILLIS=0
-D BLE_PIN_CODE=123456 ; dynamic, random PIN
-D BLE_DEBUG_LOGGING=1
-D OFFLINE_QUEUE_SIZE=256
@ -53,8 +55,9 @@ build_src_filter = ${Heltec_E290_base.build_src_filter}
lib_deps =
${Heltec_E290_base.lib_deps}
densaugeo/base64 @ ~1.4.0
bakercp/CRC32 @ ^2.0.0
[env:Heltec_E290_companion_usb_]
[env:Heltec_E290_companion_usb]
extends = Heltec_E290_base
build_flags =
${Heltec_E290_base.build_flags}
@ -62,6 +65,7 @@ build_flags =
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
-D DISPLAY_CLASS=E290Display
-D AUTO_OFF_MILLIS=0
-D BLE_PIN_CODE=123456 ; dynamic, random PIN
-D BLE_DEBUG_LOGGING=1
-D OFFLINE_QUEUE_SIZE=256
@ -73,8 +77,9 @@ build_src_filter = ${Heltec_E290_base.build_src_filter}
lib_deps =
${Heltec_E290_base.lib_deps}
densaugeo/base64 @ ~1.4.0
bakercp/CRC32 @ ^2.0.0
[env:Heltec_E290_repeater_]
[env:Heltec_E290_repeater]
extends = Heltec_E290_base
build_flags =
${Heltec_E290_base.build_flags}
@ -90,8 +95,9 @@ build_src_filter = ${Heltec_E290_base.build_src_filter}
lib_deps =
${Heltec_E290_base.lib_deps}
${esp32_ota.lib_deps}
bakercp/CRC32 @ ^2.0.0
; [env:Heltec_E290_repeater_bridge_rs232_]
; [env:Heltec_E290_repeater_bridge_rs232]
; extends = Heltec_E290_base
; build_flags =
; ${Heltec_E290_base.build_flags}
@ -114,8 +120,9 @@ lib_deps =
; lib_deps =
; ${Heltec_E290_base.lib_deps}
; ${esp32_ota.lib_deps}
; bakercp/CRC32 @ ^2.0.0
[env:Heltec_E290_repeater_bridge_espnow_]
[env:Heltec_E290_repeater_bridge_espnow]
extends = Heltec_E290_base
build_flags =
${Heltec_E290_base.build_flags}
@ -136,8 +143,9 @@ build_src_filter = ${Heltec_E290_base.build_src_filter}
lib_deps =
${Heltec_E290_base.lib_deps}
${esp32_ota.lib_deps}
bakercp/CRC32 @ ^2.0.0
[env:Heltec_E290_room_server_]
[env:Heltec_E290_room_server]
extends = Heltec_E290_base
build_flags =
${Heltec_E290_base.build_flags}
@ -153,3 +161,4 @@ build_src_filter = ${Heltec_E290_base.build_src_filter}
lib_deps =
${Heltec_E290_base.lib_deps}
${esp32_ota.lib_deps}
bakercp/CRC32 @ ^2.0.0

2
variants/heltec_e290/target.cpp
View file

@ -18,7 +18,7 @@ AutoDiscoverRTCClock rtc_clock(fallback_clock);
SensorManager sensors;
#ifdef DISPLAY_CLASS
DISPLAY_CLASS display;
DISPLAY_CLASS display(&board.periph_power);
MomentaryButton user_btn(PIN_USER_BTN, 1000, true);
#endif

2
variants/heltec_e290/target.h
View file

@ -26,4 +26,4 @@ bool radio_init();
uint32_t radio_get_rng_seed();
void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
void radio_set_tx_power(int8_t dbm);
mesh::LocalIdentity radio_new_identity();
mesh::LocalIdentity radio_new_identity();

51
variants/heltec_t096/LoRaFEMControl.cpp Normal file
View file

@ -0,0 +1,51 @@
#include "LoRaFEMControl.h"
#include <Arduino.h>
void LoRaFEMControl::init(void)
{
pinMode(P_LORA_PA_POWER, OUTPUT);
digitalWrite(P_LORA_PA_POWER, HIGH);
delay(1);
pinMode(P_LORA_KCT8103L_PA_CSD, OUTPUT);
digitalWrite(P_LORA_KCT8103L_PA_CSD, HIGH);
pinMode(P_LORA_KCT8103L_PA_CTX, OUTPUT);
digitalWrite(P_LORA_KCT8103L_PA_CTX, HIGH);
setLnaCanControl(true);
}
void LoRaFEMControl::setSleepModeEnable(void)
{
// shutdown the PA
digitalWrite(P_LORA_KCT8103L_PA_CSD, LOW);
}
void LoRaFEMControl::setTxModeEnable(void)
{
digitalWrite(P_LORA_KCT8103L_PA_CSD, HIGH);
digitalWrite(P_LORA_KCT8103L_PA_CTX, HIGH);
}
void LoRaFEMControl::setRxModeEnable(void)
{
digitalWrite(P_LORA_KCT8103L_PA_CSD, HIGH);
if (lna_enabled) {
digitalWrite(P_LORA_KCT8103L_PA_CTX, LOW);
} else {
digitalWrite(P_LORA_KCT8103L_PA_CTX, HIGH);
}
}
void LoRaFEMControl::setRxModeEnableWhenMCUSleep(void)
{
digitalWrite(P_LORA_KCT8103L_PA_CSD, HIGH);
if (lna_enabled) {
digitalWrite(P_LORA_KCT8103L_PA_CTX, LOW);
} else {
digitalWrite(P_LORA_KCT8103L_PA_CTX, HIGH);
}
}
void LoRaFEMControl::setLNAEnable(bool enabled)
{
lna_enabled = enabled;
}

21
variants/heltec_t096/LoRaFEMControl.h Normal file
View file

@ -0,0 +1,21 @@
#pragma once
#include <stdint.h>
class LoRaFEMControl
{
public:
LoRaFEMControl() {}
virtual ~LoRaFEMControl() {}
void init(void);
void setSleepModeEnable(void);
void setTxModeEnable(void);
void setRxModeEnable(void);
void setRxModeEnableWhenMCUSleep(void);
void setLNAEnable(bool enabled);
bool isLnaCanControl(void) { return lna_can_control; }
void setLnaCanControl(bool can_control) { lna_can_control = can_control; }
private:
bool lna_enabled = false;
bool lna_can_control = false;
};

126
variants/heltec_t096/T096Board.cpp Normal file
View file

@ -0,0 +1,126 @@
#include "T096Board.h"
#include <Arduino.h>
#include <Wire.h>
#ifdef NRF52_POWER_MANAGEMENT
// Static configuration for power management
// Values come from variant.h defines
const PowerMgtConfig power_config = {
.lpcomp_ain_channel = PWRMGT_LPCOMP_AIN,
.lpcomp_refsel = PWRMGT_LPCOMP_REFSEL,
.voltage_bootlock = PWRMGT_VOLTAGE_BOOTLOCK
};
void T096Board::initiateShutdown(uint8_t reason) {
#if ENV_INCLUDE_GPS == 1
pinMode(PIN_GPS_EN, OUTPUT);
digitalWrite(PIN_GPS_EN, !PIN_GPS_EN_ACTIVE);
#endif
variant_shutdown();
bool enable_lpcomp = (reason == SHUTDOWN_REASON_LOW_VOLTAGE ||
reason == SHUTDOWN_REASON_BOOT_PROTECT);
pinMode(PIN_BAT_CTL, OUTPUT);
digitalWrite(PIN_BAT_CTL, enable_lpcomp ? HIGH : LOW);
if (enable_lpcomp) {
configureVoltageWake(power_config.lpcomp_ain_channel, power_config.lpcomp_refsel);
}
enterSystemOff(reason);
}
#endif // NRF52_POWER_MANAGEMENT
void T096Board::begin() {
NRF52Board::begin();
#ifdef NRF52_POWER_MANAGEMENT
// Boot voltage protection check (may not return if voltage too low)
checkBootVoltage(&power_config);
#endif
#if defined(PIN_BOARD_SDA) && defined(PIN_BOARD_SCL)
Wire.setPins(PIN_BOARD_SDA, PIN_BOARD_SCL);
#endif
Wire.begin();
pinMode(P_LORA_TX_LED, OUTPUT);
digitalWrite(P_LORA_TX_LED, LOW);
periph_power.begin();
loRaFEMControl.init();
delay(1);
}
void T096Board::onBeforeTransmit() {
digitalWrite(P_LORA_TX_LED, HIGH); // turn TX LED on
loRaFEMControl.setTxModeEnable();
}
void T096Board::onAfterTransmit() {
digitalWrite(P_LORA_TX_LED, LOW); //turn TX LED off
loRaFEMControl.setRxModeEnable();
}
uint16_t T096Board::getBattMilliVolts() {
int adcvalue = 0;
analogReadResolution(12);
analogReference(AR_INTERNAL_3_0);
pinMode(PIN_VBAT_READ, INPUT);
pinMode(PIN_BAT_CTL, OUTPUT);
digitalWrite(PIN_BAT_CTL, 1);
delay(10);
adcvalue = analogRead(PIN_VBAT_READ);
digitalWrite(PIN_BAT_CTL, 0);
return (uint16_t)((float)adcvalue * MV_LSB * 4.9);
}
void T096Board::variant_shutdown() {
nrf_gpio_cfg_default(PIN_VEXT_EN);
nrf_gpio_cfg_default(PIN_TFT_CS);
nrf_gpio_cfg_default(PIN_TFT_DC);
nrf_gpio_cfg_default(PIN_TFT_SDA);
nrf_gpio_cfg_default(PIN_TFT_SCL);
nrf_gpio_cfg_default(PIN_TFT_RST);
nrf_gpio_cfg_default(PIN_TFT_LEDA_CTL);
nrf_gpio_cfg_default(PIN_LED);
nrf_gpio_cfg_default(P_LORA_KCT8103L_PA_CSD);
nrf_gpio_cfg_default(P_LORA_KCT8103L_PA_CTX);
pinMode(P_LORA_PA_POWER, OUTPUT);
digitalWrite(P_LORA_PA_POWER, LOW);
digitalWrite(PIN_BAT_CTL, LOW);
nrf_gpio_cfg_default(LORA_CS);
nrf_gpio_cfg_default(SX126X_DIO1);
nrf_gpio_cfg_default(SX126X_BUSY);
nrf_gpio_cfg_default(SX126X_RESET);
nrf_gpio_cfg_default(PIN_SPI_MISO);
nrf_gpio_cfg_default(PIN_SPI_MOSI);
nrf_gpio_cfg_default(PIN_SPI_SCK);
// nrf_gpio_cfg_default(PIN_GPS_PPS);
nrf_gpio_cfg_default(PIN_GPS_RESET);
nrf_gpio_cfg_default(PIN_GPS_EN);
nrf_gpio_cfg_default(PIN_GPS_RX);
nrf_gpio_cfg_default(PIN_GPS_TX);
}
void T096Board::powerOff() {
#if ENV_INCLUDE_GPS == 1
pinMode(PIN_GPS_EN, OUTPUT);
digitalWrite(PIN_GPS_EN, !PIN_GPS_EN_ACTIVE);
#endif
loRaFEMControl.setSleepModeEnable();
variant_shutdown();
sd_power_system_off();
}
const char* T096Board::getManufacturerName() const {
return "Heltec T096";
}

28
variants/heltec_t096/T096Board.h Normal file
View file

@ -0,0 +1,28 @@
#pragma once
#include <MeshCore.h>
#include <Arduino.h>
#include <helpers/NRF52Board.h>
#include <helpers/RefCountedDigitalPin.h>
#include "LoRaFEMControl.h"
class T096Board : public NRF52BoardDCDC {
protected:
#ifdef NRF52_POWER_MANAGEMENT
void initiateShutdown(uint8_t reason) override;
#endif
void variant_shutdown();
public:
RefCountedDigitalPin periph_power;
LoRaFEMControl loRaFEMControl;
T096Board() :periph_power(PIN_VEXT_EN,PIN_VEXT_EN_ACTIVE), NRF52Board("T096_OTA") {}
void begin();
void onBeforeTransmit(void) override;
void onAfterTransmit(void) override;
uint16_t getBattMilliVolts() override;
const char* getManufacturerName() const override ;
void powerOff() override;
};

148
variants/heltec_t096/platformio.ini Normal file
View file

@ -0,0 +1,148 @@
[Heltec_t096]
extends = nrf52_base
board = heltec_t096
board_build.ldscript = boards/nrf52840_s140_v6.ld
build_flags = ${nrf52_base.build_flags}
${sensor_base.build_flags}
-I lib/nrf52/s140_nrf52_6.1.1_API/include
-I lib/nrf52/s140_nrf52_6.1.1_API/include/nrf52
-I variants/heltec_t096
-I src/helpers/ui
-D HELTEC_T096
-D NRF52_POWER_MANAGEMENT
-D P_LORA_DIO_1=21
-D P_LORA_NSS=5
-D P_LORA_RESET=16
-D P_LORA_BUSY=19
-D P_LORA_SCLK=40
-D P_LORA_MISO=14
-D P_LORA_MOSI=11
-D P_LORA_TX_LED=28
-D P_LORA_PA_POWER=30 ;VFEM_Ctrl -LDO power enable
-D P_LORA_KCT8103L_PA_CSD=12
-D P_LORA_KCT8103L_PA_CTX=41
-D LORA_TX_POWER=9 ; 9dBm + ~13dB KCT8103L gain = ~22dBm output
-D MAX_LORA_TX_POWER=22 ; Max SX1262 output -> ~28dBm at antenna
-D RADIO_CLASS=CustomSX1262
-D WRAPPER_CLASS=CustomSX1262Wrapper
-D SX126X_DIO2_AS_RF_SWITCH=true
-D SX126X_DIO3_TCXO_VOLTAGE=1.8
-D SX126X_CURRENT_LIMIT=140
-D SX126X_RX_BOOSTED_GAIN=1
-D PIN_VEXT_EN=26 ; Vext is connected to VDD which is also connected to TFT & GPS
-D PIN_VEXT_EN_ACTIVE=HIGH
-D PIN_GPS_RX=25
-D PIN_GPS_TX=23
-D PIN_GPS_EN=GPS_EN
-D PIN_GPS_EN_ACTIVE=LOW
-D PIN_GPS_RESET=GPS_RESET
-D PIN_GPS_RESET_ACTIVE=LOW
-D GPS_BAUD_RATE=115200
-D PIN_VBAT_READ=BATTERY_PIN
-D PIN_BAT_CTL=47
-D DISPLAY_CLASS=ST7735Display
-D DISPLAY_ROTATION=1
build_src_filter = ${nrf52_base.build_src_filter}
+<helpers/*.cpp>
+<helpers/sensors>
+<../variants/heltec_t096>
+<helpers/ui/ST7735Display.cpp>
+<helpers/ui/MomentaryButton.cpp>
lib_deps =
${nrf52_base.lib_deps}
${sensor_base.lib_deps}
adafruit/Adafruit ST7735 and ST7789 Library @ ^1.11.0
debug_tool = jlink
upload_protocol = nrfutil
[env:Heltec_t096_repeater]
extends = Heltec_t096
build_src_filter = ${Heltec_t096.build_src_filter}
+<../examples/simple_repeater>
build_flags =
${Heltec_t096.build_flags}
-D ADVERT_NAME='"Heltec_t096 Repeater"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D MAX_NEIGHBOURS=50
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
[env:Heltec_t096_repeater_bridge_rs232]
extends = Heltec_t096
build_flags =
${Heltec_t096.build_flags}
-D ADVERT_NAME='"RS232 Bridge"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D MAX_NEIGHBOURS=50
-D WITH_RS232_BRIDGE=Serial2
-D WITH_RS232_BRIDGE_RX=9
-D WITH_RS232_BRIDGE_TX=10
; -D BRIDGE_DEBUG=1
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${Heltec_t096.build_src_filter}
+<helpers/bridges/RS232Bridge.cpp>
+<../examples/simple_repeater>
[env:Heltec_t096_room_server]
extends = Heltec_t096
build_src_filter = ${Heltec_t096.build_src_filter}
+<../examples/simple_room_server>
build_flags =
${Heltec_t096.build_flags}
-D ADVERT_NAME='"Heltec_t096 Room"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D ROOM_PASSWORD='"hello"'
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
[env:Heltec_t096_companion_radio_ble]
extends = Heltec_t096
board_build.ldscript = boards/nrf52840_s140_v6_extrafs.ld
board_upload.maximum_size = 712704
build_flags =
${Heltec_t096.build_flags}
-I examples/companion_radio/ui-new
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
-D BLE_PIN_CODE=123456
-D ENV_INCLUDE_GPS=1 ; enable the GPS page in UI
; -D BLE_DEBUG_LOGGING=1
-D OFFLINE_QUEUE_SIZE=256
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${Heltec_t096.build_src_filter}
+<helpers/nrf52/SerialBLEInterface.cpp>
+<../examples/companion_radio/*.cpp>
+<../examples/companion_radio/ui-new/*.cpp>
lib_deps =
${Heltec_t096.lib_deps}
densaugeo/base64 @ ~1.4.0
[env:Heltec_t096_companion_radio_usb]
extends = Heltec_t096
board_build.ldscript = boards/nrf52840_s140_v6_extrafs.ld
board_upload.maximum_size = 712704
build_flags =
${Heltec_t096.build_flags}
-I examples/companion_radio/ui-new
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
; -D BLE_PIN_CODE=123456
; -D BLE_DEBUG_LOGGING=1
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${Heltec_t096.build_src_filter}
+<helpers/nrf52/*.cpp>
+<../examples/companion_radio/*.cpp>
+<../examples/companion_radio/ui-new/*.cpp>
lib_deps =
${Heltec_t096.lib_deps}
densaugeo/base64 @ ~1.4.0

64
variants/heltec_t096/target.cpp Normal file
View file

@ -0,0 +1,64 @@
#include "target.h"
#include <Arduino.h>
#include <helpers/ArduinoHelpers.h>
#ifdef ENV_INCLUDE_GPS
#include <helpers/sensors/MicroNMEALocationProvider.h>
#endif
T096Board board;
#if defined(P_LORA_SCLK)
RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, SPI);
#else
RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY);
#endif
WRAPPER_CLASS radio_driver(radio, board);
VolatileRTCClock fallback_clock;
AutoDiscoverRTCClock rtc_clock(fallback_clock);
#if ENV_INCLUDE_GPS
#include <helpers/sensors/MicroNMEALocationProvider.h>
MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1, &rtc_clock, GPS_RESET, GPS_EN, &board.periph_power);
EnvironmentSensorManager sensors = EnvironmentSensorManager(nmea);
#else
EnvironmentSensorManager sensors;
#endif
#ifdef DISPLAY_CLASS
DISPLAY_CLASS display(&board.periph_power);
MomentaryButton user_btn(PIN_USER_BTN, 1000, true);
#endif
bool radio_init() {
rtc_clock.begin(Wire);
#if defined(P_LORA_SCLK)
return radio.std_init(&SPI);
#else
return radio.std_init();
#endif
}
uint32_t radio_get_rng_seed() {
return radio.random(0x7FFFFFFF);
}
void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
radio.setFrequency(freq);
radio.setSpreadingFactor(sf);
radio.setBandwidth(bw);
radio.setCodingRate(cr);
}
void radio_set_tx_power(int8_t dbm) {
radio.setOutputPower(dbm);
}
mesh::LocalIdentity radio_new_identity() {
RadioNoiseListener rng(radio);
return mesh::LocalIdentity(&rng); // create new random identity
}

33
variants/heltec_t096/target.h Normal file
View file

@ -0,0 +1,33 @@
#pragma once
#define RADIOLIB_STATIC_ONLY 1
#include <RadioLib.h>
#include <T096Board.h>
#include <helpers/AutoDiscoverRTCClock.h>
#include <helpers/radiolib/CustomSX1262Wrapper.h>
#include <helpers/radiolib/RadioLibWrappers.h>
#include <helpers/sensors/EnvironmentSensorManager.h>
#include <helpers/sensors/LocationProvider.h>
#ifdef DISPLAY_CLASS
#include <helpers/ui/MomentaryButton.h>
#include <helpers/ui/ST7735Display.h>
#else
#include "helpers/ui/NullDisplayDriver.h"
#endif
extern T096Board board;
extern WRAPPER_CLASS radio_driver;
extern AutoDiscoverRTCClock rtc_clock;
extern EnvironmentSensorManager sensors;
#ifdef DISPLAY_CLASS
extern DISPLAY_CLASS display;
extern MomentaryButton user_btn;
#endif
bool radio_init();
uint32_t radio_get_rng_seed();
void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
void radio_set_tx_power(int8_t dbm);
mesh::LocalIdentity radio_new_identity();

15
variants/heltec_t096/variant.cpp Normal file
View file

@ -0,0 +1,15 @@
#include "variant.h"
#include "wiring_constants.h"
#include "wiring_digital.h"
const uint32_t g_ADigitalPinMap[] = {
0xff, 0xff, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13,
14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26,
27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39,
40, 41, 42, 43, 44, 45, 46, 47
};
void initVariant()
{
pinMode(PIN_USER_BTN, INPUT);
}

132
variants/heltec_t096/variant.h Normal file
View file

@ -0,0 +1,132 @@
/*
* variant.h
* Copyright (C) 2023 Seeed K.K.
* MIT License
*/
#pragma once
#include "WVariant.h"
////////////////////////////////////////////////////////////////////////////////
// Low frequency clock source
#define USE_LFXO // 32.768 kHz crystal oscillator
#define VARIANT_MCK (64000000ul)
#define WIRE_INTERFACES_COUNT (2)
////////////////////////////////////////////////////////////////////////////////
// Power
#define NRF_APM
#define PIN_3V3_EN (38)
#define BATTERY_PIN (3)
#define ADC_MULTIPLIER (4.90F)
#define ADC_RESOLUTION (14)
#define BATTERY_SENSE_RES (12)
#define AREF_VOLTAGE (3.0)
#define MV_LSB (3000.0F / 4096.0F) // 12-bit ADC with 3.0V input range
// Power management boot protection threshold (millivolts)
// Set to 0 to disable boot protection
#define PWRMGT_VOLTAGE_BOOTLOCK 3300 // Won't boot below this voltage (mV)
// LPCOMP wake configuration (voltage recovery from SYSTEMOFF)
// AIN1 = P0.03 = BATTERY_PIN / PIN_VBAT_READ
#define PWRMGT_LPCOMP_AIN 1
#define PWRMGT_LPCOMP_REFSEL 1 // 2/8 VDD (~3.68-4.04V)
////////////////////////////////////////////////////////////////////////////////
// Number of pins
#define PINS_COUNT (48)
#define NUM_DIGITAL_PINS (48)
#define NUM_ANALOG_INPUTS (1)
#define NUM_ANALOG_OUTPUTS (0)
// I2C pin definition
#define PIN_WIRE_SDA (0 + 7)
#define PIN_WIRE_SCL (0 + 8)
// I2C bus 1
// Available on header pins, for general use
#define PIN_WIRE1_SDA (0 + 4)
#define PIN_WIRE1_SCL (0 + 27)
////////////////////////////////////////////////////////////////////////////////
// Builtin LEDs
#define LED_BUILTIN (28)
#define PIN_LED LED_BUILTIN
#define LED_RED LED_BUILTIN
#define LED_BLUE (-1) // No blue led, prevents Bluefruit flashing the green LED during advertising
#define LED_PIN LED_BUILTIN
#define LED_STATE_ON 1
// #define PIN_NEOPIXEL (-1)
// #define NEOPIXEL_NUM (2)
////////////////////////////////////////////////////////////////////////////////
// Builtin buttons
#define PIN_BUTTON1 (32 + 10)
#define BUTTON_PIN PIN_BUTTON1
// #define PIN_BUTTON2 (11)
// #define BUTTON_PIN2 PIN_BUTTON2
#define PIN_USER_BTN BUTTON_PIN
////////////////////////////////////////////////////////////////////////////////
// Lora
#define USE_SX1262
#define LORA_CS (0 + 5)
#define SX126X_DIO1 (0 + 21)
#define SX126X_BUSY (0 + 19)
#define SX126X_RESET (0 + 16)
#define SX126X_DIO2_AS_RF_SWITCH
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
////////////////////////////////////////////////////////////////////////////////
// SPI pin definition
#define SPI_INTERFACES_COUNT (2)
#define PIN_SPI_MISO (0 + 14)
#define PIN_SPI_MOSI (0 + 11)
#define PIN_SPI_SCK (32 + 8)
#define PIN_SPI_NSS LORA_CS
#define PIN_SPI1_MISO (-1)
#define PIN_SPI1_MOSI (0+17)
#define PIN_SPI1_SCK (0+20)
////////////////////////////////////////////////////////////////////////////////
// GPS
#define GPS_EN (0 + 6)
#define GPS_RESET (32 + 14)
#define PIN_SERIAL1_RX (0 + 23)
#define PIN_SERIAL1_TX (0 + 25)
#define PIN_SERIAL2_RX (0 + 9)
#define PIN_SERIAL2_TX (0 + 10)
////////////////////////////////////////////////////////////////////////////////
// TFT
#define PIN_TFT_SCL (0 + 20)
#define PIN_TFT_SDA (0 + 17)
#define PIN_TFT_RST (0 + 13)
// #define PIN_TFT_VDD_CTL (0 + 26)
#define PIN_TFT_LEDA_CTL (32 + 12)
#define PIN_TFT_LEDA_CTL_ACTIVE LOW
#define PIN_TFT_CS (0 + 22)
#define PIN_TFT_DC (0 + 15)

1
variants/heltec_t190/platformio.ini
View file

@ -6,6 +6,7 @@ build_flags =
-I variants/heltec_t190
-I src/helpers/ui
-D HELTEC_VISION_MASTER_T190
-D USE_SX1262
-D RADIO_CLASS=CustomSX1262
-D WRAPPER_CLASS=CustomSX1262Wrapper
-D P_LORA_DIO_1=14

2
variants/heltec_t190/target.h
View file

@ -26,4 +26,4 @@ bool radio_init();
uint32_t radio_get_rng_seed();
void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
void radio_set_tx_power(int8_t dbm);
mesh::LocalIdentity radio_new_identity();
mesh::LocalIdentity radio_new_identity();

1
variants/heltec_tracker/platformio.ini
View file

@ -14,6 +14,7 @@ build_flags =
-D P_LORA_SCLK=9
-D P_LORA_MISO=11
-D P_LORA_MOSI=10
-D USE_SX1262
-D RADIO_CLASS=CustomSX1262
-D WRAPPER_CLASS=CustomSX1262Wrapper
-D LORA_TX_POWER=22

1
variants/heltec_tracker_v2/platformio.ini
View file

@ -7,6 +7,7 @@ build_flags =
-I variants/heltec_tracker_v2
-D HELTEC_TRACKER_V2
-D ESP32_CPU_FREQ=160
-D USE_SX1262
-D RADIO_CLASS=CustomSX1262
-D WRAPPER_CLASS=CustomSX1262Wrapper
-D P_LORA_TX_LED=18

1
variants/heltec_tracker_v2/target.cpp
View file

@ -58,3 +58,4 @@ mesh::LocalIdentity radio_new_identity() {
RadioNoiseListener rng(radio);
return mesh::LocalIdentity(&rng); // create new random identity
}

1
variants/heltec_tracker_v2/target.h
View file

@ -28,3 +28,4 @@ uint32_t radio_get_rng_seed();
void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
void radio_set_tx_power(int8_t dbm);
mesh::LocalIdentity radio_new_identity();

2
variants/heltec_v2/platformio.ini
View file

@ -178,7 +178,7 @@ build_flags =
${Heltec_lora32_v2.build_flags}
-I examples/companion_radio/ui-new
-D DISPLAY_CLASS=SSD1306Display
-D MAX_CONTACTS=160
-D MAX_CONTACTS=100
-D MAX_GROUP_CHANNELS=8
-D WIFI_DEBUG_LOGGING=1
-D WIFI_SSID='"myssid"'

2
variants/heltec_v2/target.cpp
View file

@ -50,4 +50,4 @@ void radio_set_tx_power(int8_t dbm) {
mesh::LocalIdentity radio_new_identity() {
RadioNoiseListener rng(radio);
return mesh::LocalIdentity(&rng); // create new random identity
}
}

5
variants/heltec_v3/HeltecV3Board.h
View file

@ -11,6 +11,9 @@
#ifndef PIN_ADC_CTRL // set in platformio.ini for Heltec Wireless Tracker (2)
#define PIN_ADC_CTRL 37
#endif
#ifndef ADC_MULTIPLIER //default ADC multiplier
#define ADC_MULTIPLIER 5.42
#endif
#define PIN_ADC_CTRL_ACTIVE LOW
#define PIN_ADC_CTRL_INACTIVE HIGH
@ -88,7 +91,7 @@ public:
digitalWrite(PIN_ADC_CTRL, !adc_active_state);
return (5.42 * (3.3 / 1024.0) * raw) * 1000;
return (ADC_MULTIPLIER * (3.3 / 1024.0) * raw) * 1000;
}
const char* getManufacturerName() const override {

1
variants/heltec_v3/platformio.ini
View file

@ -14,6 +14,7 @@ build_flags =
-D P_LORA_SCLK=9
-D P_LORA_MISO=11
-D P_LORA_MOSI=10
-D USE_SX1262
-D RADIO_CLASS=CustomSX1262
-D WRAPPER_CLASS=CustomSX1262Wrapper
-D LORA_TX_POWER=22

1
variants/heltec_v3/target.cpp
View file

@ -58,3 +58,4 @@ mesh::LocalIdentity radio_new_identity() {
RadioNoiseListener rng(radio);
return mesh::LocalIdentity(&rng); // create new random identity
}

40
variants/heltec_v4/HeltecV4Board.cpp
View file

@ -7,31 +7,15 @@ void HeltecV4Board::begin() {
pinMode(PIN_ADC_CTRL, OUTPUT);
digitalWrite(PIN_ADC_CTRL, LOW); // Initially inactive
// Set up digital GPIO registers before releasing RTC hold. The hold latches
// the pad state including function select, so register writes accumulate
// without affecting the pad. On hold release, all changes apply atomically
// (IO MUX switches to digital GPIO with output already HIGH — no glitch).
pinMode(P_LORA_PA_POWER, OUTPUT);
digitalWrite(P_LORA_PA_POWER,HIGH);
rtc_gpio_hold_dis((gpio_num_t)P_LORA_PA_POWER);
pinMode(P_LORA_PA_EN, OUTPUT);
digitalWrite(P_LORA_PA_EN,HIGH);
rtc_gpio_hold_dis((gpio_num_t)P_LORA_PA_EN);
pinMode(P_LORA_PA_TX_EN, OUTPUT);
digitalWrite(P_LORA_PA_TX_EN,LOW);
esp_reset_reason_t reason = esp_reset_reason();
if (reason != ESP_RST_DEEPSLEEP) {
delay(1); // GC1109 startup time after cold power-on
}
loRaFEMControl.init();
periph_power.begin();
esp_reset_reason_t reason = esp_reset_reason();
if (reason == ESP_RST_DEEPSLEEP) {
long wakeup_source = esp_sleep_get_ext1_wakeup_status();
if (wakeup_source & (1 << P_LORA_DIO_1)) { // received a LoRa packet (while in deep sleep)
startup_reason = BD_STARTUP_RX_PACKET;
}
}
rtc_gpio_hold_dis((gpio_num_t)P_LORA_NSS);
rtc_gpio_deinit((gpio_num_t)P_LORA_DIO_1);
@ -40,12 +24,12 @@ void HeltecV4Board::begin() {
void HeltecV4Board::onBeforeTransmit(void) {
digitalWrite(P_LORA_TX_LED, HIGH); // turn TX LED on
digitalWrite(P_LORA_PA_TX_EN,HIGH);
loRaFEMControl.setTxModeEnable();
}
void HeltecV4Board::onAfterTransmit(void) {
digitalWrite(P_LORA_TX_LED, LOW); // turn TX LED off
digitalWrite(P_LORA_PA_TX_EN,LOW);
loRaFEMControl.setRxModeEnable();
}
void HeltecV4Board::enterDeepSleep(uint32_t secs, int pin_wake_btn) {
@ -57,9 +41,7 @@ void HeltecV4Board::begin() {
rtc_gpio_hold_en((gpio_num_t)P_LORA_NSS);
// Hold GC1109 FEM pins during sleep to keep LNA active for RX wake
rtc_gpio_hold_en((gpio_num_t)P_LORA_PA_POWER);
rtc_gpio_hold_en((gpio_num_t)P_LORA_PA_EN);
loRaFEMControl.setRxModeEnableWhenMCUSleep();//It also needs to be enabled in receive mode
if (pin_wake_btn < 0) {
esp_sleep_enable_ext1_wakeup( (1L << P_LORA_DIO_1), ESP_EXT1_WAKEUP_ANY_HIGH); // wake up on: recv LoRa packet
@ -95,9 +77,9 @@ void HeltecV4Board::begin() {
}
const char* HeltecV4Board::getManufacturerName() const {
#ifdef HELTEC_LORA_V4_TFT
return "Heltec V4 TFT";
#else
return "Heltec V4 OLED";
#endif
#ifdef HELTEC_LORA_V4_TFT
return loRaFEMControl.getFEMType() == KCT8103L_PA ? "Heltec V4.3 TFT" : "Heltec V4 TFT";
#else
return loRaFEMControl.getFEMType() == KCT8103L_PA ? "Heltec V4.3 OLED" : "Heltec V4 OLED";
#endif
}

4
variants/heltec_v4/HeltecV4Board.h
View file

@ -4,12 +4,12 @@
#include <helpers/RefCountedDigitalPin.h>
#include <helpers/ESP32Board.h>
#include <driver/rtc_io.h>
#include "LoRaFEMControl.h"
class HeltecV4Board : public ESP32Board {
public:
RefCountedDigitalPin periph_power;
LoRaFEMControl loRaFEMControl;
HeltecV4Board() : periph_power(PIN_VEXT_EN,PIN_VEXT_EN_ACTIVE) { }
void begin();

108
variants/heltec_v4/LoRaFEMControl.cpp Normal file
View file

@ -0,0 +1,108 @@
#include "LoRaFEMControl.h"
#include <driver/rtc_io.h>
#include <esp_sleep.h>
#include <Arduino.h>
void LoRaFEMControl::init(void)
{
// Power on FEM LDO — set registers before releasing RTC hold for
// atomic transition (no glitch on deep sleep wake).
pinMode(P_LORA_PA_POWER, OUTPUT);
digitalWrite(P_LORA_PA_POWER, HIGH);
rtc_gpio_hold_dis((gpio_num_t)P_LORA_PA_POWER);
esp_reset_reason_t reason = esp_reset_reason();
if (reason != ESP_RST_DEEPSLEEP) {
delay(1); // FEM startup time after cold power-on
}
// Auto-detect FEM type via shared GPIO2 default pull level.
// GC1109 CSD: internal pull-down → reads LOW
// KCT8103L CSD: internal pull-up → reads HIGH
rtc_gpio_hold_dis((gpio_num_t)P_LORA_KCT8103L_PA_CSD);
pinMode(P_LORA_KCT8103L_PA_CSD, INPUT);
delay(1);
if(digitalRead(P_LORA_KCT8103L_PA_CSD)==HIGH) {
// FEM is KCT8103L (V4.3)
fem_type= KCT8103L_PA;
pinMode(P_LORA_KCT8103L_PA_CSD, OUTPUT);
digitalWrite(P_LORA_KCT8103L_PA_CSD, HIGH);
rtc_gpio_hold_dis((gpio_num_t)P_LORA_KCT8103L_PA_CTX);
pinMode(P_LORA_KCT8103L_PA_CTX, OUTPUT);
digitalWrite(P_LORA_KCT8103L_PA_CTX, lna_enabled ? LOW : HIGH);
setLnaCanControl(true);
} else {
// FEM is GC1109 (V4.2)
fem_type= GC1109_PA;
pinMode(P_LORA_GC1109_PA_EN, OUTPUT);
digitalWrite(P_LORA_GC1109_PA_EN, HIGH);
pinMode(P_LORA_GC1109_PA_TX_EN, OUTPUT);
digitalWrite(P_LORA_GC1109_PA_TX_EN, LOW);
}
}
void LoRaFEMControl::setSleepModeEnable(void)
{
if(fem_type==GC1109_PA) {
/*
* Do not switch the power on and off frequently.
* After turning off P_LORA_PA_EN, the power consumption has dropped to the uA level.
*/
digitalWrite(P_LORA_GC1109_PA_EN, LOW);
digitalWrite(P_LORA_GC1109_PA_TX_EN, LOW);
} else if(fem_type==KCT8103L_PA) {
// shutdown the PA
digitalWrite(P_LORA_KCT8103L_PA_CSD, LOW);
}
}
void LoRaFEMControl::setTxModeEnable(void)
{
if(fem_type==GC1109_PA) {
digitalWrite(P_LORA_GC1109_PA_EN, HIGH); // CSD=1: Chip enabled
digitalWrite(P_LORA_GC1109_PA_TX_EN, HIGH); // CPS: 1=full PA, 0=bypass (for RX, CPS is don't care)
} else if(fem_type==KCT8103L_PA) {
digitalWrite(P_LORA_KCT8103L_PA_CSD, HIGH);
digitalWrite(P_LORA_KCT8103L_PA_CTX, HIGH);
}
}
void LoRaFEMControl::setRxModeEnable(void)
{
if(fem_type==GC1109_PA) {
digitalWrite(P_LORA_GC1109_PA_EN, HIGH); // CSD=1: Chip enabled
digitalWrite(P_LORA_GC1109_PA_TX_EN, LOW);
} else if(fem_type==KCT8103L_PA) {
digitalWrite(P_LORA_KCT8103L_PA_CSD, HIGH);
if(lna_enabled) {
digitalWrite(P_LORA_KCT8103L_PA_CTX, LOW); // LNA on
} else {
digitalWrite(P_LORA_KCT8103L_PA_CTX, HIGH); // LNA bypass
}
}
}
void LoRaFEMControl::setRxModeEnableWhenMCUSleep(void)
{
digitalWrite(P_LORA_PA_POWER, HIGH);
rtc_gpio_hold_en((gpio_num_t)P_LORA_PA_POWER);
if(fem_type==GC1109_PA) {
digitalWrite(P_LORA_GC1109_PA_EN, HIGH);
rtc_gpio_hold_en((gpio_num_t)P_LORA_GC1109_PA_EN);
gpio_pulldown_en((gpio_num_t)P_LORA_GC1109_PA_TX_EN);
} else if(fem_type==KCT8103L_PA) {
digitalWrite(P_LORA_KCT8103L_PA_CSD, HIGH);
rtc_gpio_hold_en((gpio_num_t)P_LORA_KCT8103L_PA_CSD);
if(lna_enabled) {
digitalWrite(P_LORA_KCT8103L_PA_CTX, LOW); // LNA on
} else {
digitalWrite(P_LORA_KCT8103L_PA_CTX, HIGH); // LNA bypass
}
rtc_gpio_hold_en((gpio_num_t)P_LORA_KCT8103L_PA_CTX);
}
}
void LoRaFEMControl::setLNAEnable(bool enabled)
{
lna_enabled = enabled;
}

29
variants/heltec_v4/LoRaFEMControl.h Normal file
View file

@ -0,0 +1,29 @@
#pragma once
#include <stdint.h>
typedef enum {
GC1109_PA,
KCT8103L_PA,
OTHER_FEM_TYPES
} LoRaFEMType;
class LoRaFEMControl
{
public:
LoRaFEMControl(){ }
virtual ~LoRaFEMControl(){ }
void init(void);
void setSleepModeEnable(void);
void setTxModeEnable(void);
void setRxModeEnable(void);
void setRxModeEnableWhenMCUSleep(void);
void setLNAEnable(bool enabled);
bool isLnaCanControl(void) { return lna_can_control; }
void setLnaCanControl(bool can_control) { lna_can_control = can_control; }
LoRaFEMType getFEMType(void) const { return fem_type; }
private:
LoRaFEMType fem_type=OTHER_FEM_TYPES;
bool lna_enabled=true;
bool lna_can_control=false;
};

11
variants/heltec_v4/platformio.ini
View file

@ -6,6 +6,7 @@ build_flags =
${sensor_base.build_flags}
-I variants/heltec_v4
-D HELTEC_LORA_V4
-D USE_SX1262
-D ESP32_CPU_FREQ=80
-D RADIO_CLASS=CustomSX1262
-D WRAPPER_CLASS=CustomSX1262Wrapper
@ -17,9 +18,11 @@ build_flags =
-D P_LORA_SCLK=9
-D P_LORA_MISO=11
-D P_LORA_MOSI=10
-D P_LORA_PA_POWER=7 ; VFEM_Ctrl - Power on GC1109
-D P_LORA_PA_EN=2 ; PA CSD - Enable GC1109
-D P_LORA_PA_TX_EN=46 ; PA CPS - GC1109 TX PA full(High) / bypass(Low)
-D P_LORA_PA_POWER=7 ; // VFEM_Ctrl -LDO power enable
-D P_LORA_GC1109_PA_EN=2 ; // CSD - GC1109 chip enable (HIGH=on)
-D P_LORA_GC1109_PA_TX_EN=46 ;// CPS - GC1109 PA mode (HIGH=full PA, LOW=bypass)
-D P_LORA_KCT8103L_PA_CSD=2
-D P_LORA_KCT8103L_PA_CTX=5
-D PIN_USER_BTN=0
-D PIN_VEXT_EN=36
-D PIN_VEXT_EN_ACTIVE=HIGH
@ -204,6 +207,7 @@ build_flags =
-I examples/companion_radio/ui-new
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
-D OFFLINE_QUEUE_SIZE=256
-D DISPLAY_CLASS=SSD1306Display
-D WIFI_DEBUG_LOGGING=1
-D WIFI_SSID='"myssid"'
@ -367,6 +371,7 @@ build_flags =
-I examples/companion_radio/ui-new
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
-D OFFLINE_QUEUE_SIZE=256
-D DISPLAY_CLASS=ST7789LCDDisplay
-D WIFI_DEBUG_LOGGING=1
-D WIFI_SSID='"myssid"'

1
variants/heltec_v4/target.cpp
View file

@ -58,3 +58,4 @@ mesh::LocalIdentity radio_new_identity() {
RadioNoiseListener rng(radio);
return mesh::LocalIdentity(&rng); // create new random identity
}

1
variants/heltec_v4/target.h
View file

@ -32,3 +32,4 @@ uint32_t radio_get_rng_seed();
void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
void radio_set_tx_power(int8_t dbm);
mesh::LocalIdentity radio_new_identity();

25
variants/heltec_wireless_paper/platformio.ini
View file

@ -13,6 +13,7 @@ build_flags =
-D P_LORA_SCLK=9
-D P_LORA_MISO=11
-D P_LORA_MOSI=10
-D USE_SX1262
-D RADIO_CLASS=CustomSX1262
-D WRAPPER_CLASS=CustomSX1262Wrapper
-D LORA_TX_POWER=22
@ -21,6 +22,7 @@ build_flags =
;-D PIN_BOARD_SCL=18 ; same GPIO as P_LORA_TX_LED
-D PIN_USER_BTN=0
-D PIN_VEXT_EN=45
-D ADC_MULTIPLIER=8.4
-D PIN_VBAT_READ=20
-D PIN_ADC_CTRL=19
-D SX126X_DIO2_AS_RF_SWITCH=true
@ -60,6 +62,26 @@ build_src_filter = ${Heltec_Wireless_Paper_base.build_src_filter}
lib_deps =
${Heltec_Wireless_Paper_base.lib_deps}
densaugeo/base64 @ ~1.4.0
bakercp/CRC32 @ ^2.0.0
[env:Heltec_Wireless_Paper_companion_radio_usb]
extends = Heltec_Wireless_Paper_base
build_flags =
${Heltec_Wireless_Paper_base.build_flags}
-I examples/companion_radio/ui-new
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
-D DISPLAY_CLASS=E213Display
-D OFFLINE_QUEUE_SIZE=256
build_src_filter = ${Heltec_Wireless_Paper_base.build_src_filter}
+<helpers/ui/E213Display.cpp>
+<helpers/esp32/*.cpp>
+<../examples/companion_radio/*.cpp>
+<../examples/companion_radio/ui-new/*.cpp>
lib_deps =
${Heltec_Wireless_Paper_base.lib_deps}
densaugeo/base64 @ ~1.4.0
bakercp/CRC32 @ ^2.0.0
[env:Heltec_Wireless_Paper_repeater]
extends = Heltec_Wireless_Paper_base
@ -77,6 +99,7 @@ build_src_filter = ${Heltec_Wireless_Paper_base.build_src_filter}
lib_deps =
${Heltec_Wireless_Paper_base.lib_deps}
${esp32_ota.lib_deps}
bakercp/CRC32 @ ^2.0.0
; [env:Heltec_Wireless_Paper_repeater_bridge_rs232]
; extends = Heltec_Wireless_Paper_base
@ -123,6 +146,7 @@ build_src_filter = ${Heltec_Wireless_Paper_base.build_src_filter}
lib_deps =
${Heltec_Wireless_Paper_base.lib_deps}
${esp32_ota.lib_deps}
bakercp/CRC32 @ ^2.0.0
[env:Heltec_Wireless_Paper_room_server]
extends = Heltec_Wireless_Paper_base
@ -140,3 +164,4 @@ build_src_filter = ${Heltec_Wireless_Paper_base.build_src_filter}
lib_deps =
${Heltec_Wireless_Paper_base.lib_deps}
${esp32_ota.lib_deps}
bakercp/CRC32 @ ^2.0.0

1
variants/heltec_wireless_paper/target.cpp
View file

@ -51,3 +51,4 @@ mesh::LocalIdentity radio_new_identity() {
RadioNoiseListener rng(radio);
return mesh::LocalIdentity(&rng); // create new random identity
}

2
variants/heltec_wireless_paper/target.h
View file

@ -26,4 +26,4 @@ bool radio_init();
uint32_t radio_get_rng_seed();
void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
void radio_set_tx_power(int8_t dbm);
mesh::LocalIdentity radio_new_identity();
mesh::LocalIdentity radio_new_identity();

1
variants/ikoka_handheld_nrf/platformio.ini
View file

@ -9,6 +9,7 @@ build_flags = ${nrf52_base.build_flags}
-I variants/ikoka_handheld_nrf
-UENV_INCLUDE_GPS
-D IKOKA_NRF52
-D USE_SX1262
-D RADIO_CLASS=CustomSX1262
-D WRAPPER_CLASS=CustomSX1262Wrapper
-D P_LORA_TX_LED=11

1
variants/ikoka_handheld_nrf/target.cpp
View file

@ -44,3 +44,4 @@ mesh::LocalIdentity radio_new_identity() {
RadioNoiseListener rng(radio);
return mesh::LocalIdentity(&rng); // create new random identity
}

1
variants/ikoka_handheld_nrf/target.h
View file

@ -27,3 +27,4 @@ uint32_t radio_get_rng_seed();
void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
void radio_set_tx_power(int8_t dbm);
mesh::LocalIdentity radio_new_identity();

3
variants/ikoka_nano_nrf/platformio.ini
View file

@ -11,7 +11,8 @@ build_flags = ${nrf52_base.build_flags}
-I src/helpers/nrf52
-D P_LORA_TX_LED=11
-D DISPLAY_CLASS=NullDisplayDriver
-D RADIO_CLASS=CustomSX1262
-D USE_SX1262
-D RADIO_CLASS=CustomSX1262
-D WRAPPER_CLASS=CustomSX1262Wrapper
-D P_LORA_DIO_1=D1
-D P_LORA_BUSY=D2

1
variants/ikoka_nano_nrf/target.cpp
View file

@ -42,3 +42,4 @@ mesh::LocalIdentity radio_new_identity() {
RadioNoiseListener rng(radio);
return mesh::LocalIdentity(&rng); // create new random identity
}

1
variants/ikoka_nano_nrf/target.h
View file

@ -26,3 +26,4 @@ uint32_t radio_get_rng_seed();
void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
void radio_set_tx_power(int8_t dbm);
mesh::LocalIdentity radio_new_identity();

3
variants/ikoka_stick_nrf/platformio.ini
View file

@ -12,7 +12,8 @@ build_flags = ${nrf52_base.build_flags}
-D P_LORA_TX_LED=11
-D DISPLAY_CLASS=SSD1306Display
-D DISPLAY_ROTATION=2
-D RADIO_CLASS=CustomSX1262
-D USE_SX1262
-D RADIO_CLASS=CustomSX1262
-D WRAPPER_CLASS=CustomSX1262Wrapper
-D P_LORA_DIO_1=D1
-D P_LORA_RESET=D2

1
variants/ikoka_stick_nrf/target.cpp
View file

@ -42,3 +42,4 @@ mesh::LocalIdentity radio_new_identity() {
RadioNoiseListener rng(radio);
return mesh::LocalIdentity(&rng); // create new random identity
}

1
variants/ikoka_stick_nrf/target.h
View file

@ -26,3 +26,4 @@ uint32_t radio_get_rng_seed();
void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
void radio_set_tx_power(int8_t dbm);
mesh::LocalIdentity radio_new_identity();

1
variants/keepteen_lt1/platformio.ini
View file

@ -4,6 +4,7 @@ board = keepteen_lt1
build_flags = ${nrf52_base.build_flags}
-I variants/keepteen_lt1
-D KEEPTEEN_LT1
-D USE_SX1262
-D RADIO_CLASS=CustomSX1262
-D WRAPPER_CLASS=CustomSX1262Wrapper
-D LORA_TX_POWER=22

1
variants/keepteen_lt1/target.cpp
View file

@ -49,3 +49,4 @@ mesh::LocalIdentity radio_new_identity() {
return mesh::LocalIdentity(&rng); // create new random identity
}

1
variants/keepteen_lt1/target.h
View file

@ -28,3 +28,4 @@ uint32_t radio_get_rng_seed();
void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
void radio_set_tx_power(int8_t dbm);
mesh::LocalIdentity radio_new_identity();

1
variants/lilygo_t3s3/platformio.ini
View file

@ -22,6 +22,7 @@ build_flags =
-D SX126X_DIO2_AS_RF_SWITCH=true
-D SX126X_DIO3_TCXO_VOLTAGE=1.8
-D SX126X_CURRENT_LIMIT=140
-D USE_SX1262
-D RADIO_CLASS=CustomSX1262
-D WRAPPER_CLASS=CustomSX1262Wrapper
-D LORA_TX_POWER=22

1
variants/lilygo_t3s3/target.cpp
View file

@ -46,3 +46,4 @@ mesh::LocalIdentity radio_new_identity() {
RadioNoiseListener rng(radio);
return mesh::LocalIdentity(&rng); // create new random identity
}

1
variants/lilygo_t3s3/target.h
View file

@ -27,3 +27,4 @@ uint32_t radio_get_rng_seed();
void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
void radio_set_tx_power(int8_t dbm);
mesh::LocalIdentity radio_new_identity();

1
variants/lilygo_tbeam_1w/platformio.ini
View file

@ -154,6 +154,7 @@ build_flags =
-I examples/companion_radio/ui-new
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
-D OFFLINE_QUEUE_SIZE=256
-D WIFI_DEBUG_LOGGING=1
-D WIFI_SSID='"myssid"'
-D WIFI_PWD='"mypwd"'

1
variants/lilygo_tbeam_1w/target.cpp
View file

@ -62,3 +62,4 @@ mesh::LocalIdentity radio_new_identity() {
RadioNoiseListener rng(radio);
return mesh::LocalIdentity(&rng);
}

1
variants/lilygo_tbeam_1w/target.h
View file

@ -25,3 +25,4 @@ uint32_t radio_get_rng_seed();
void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
void radio_set_tx_power(int8_t dbm);
mesh::LocalIdentity radio_new_identity();

1
variants/lilygo_tbeam_SX1262/platformio.ini
View file

@ -9,6 +9,7 @@ build_flags =
-D SX126X_DIO3_TCXO_VOLTAGE=1.8
-D SX126X_CURRENT_LIMIT=140
-D SX126X_RX_BOOSTED_GAIN=1
-D USE_SX1262
-D RADIO_CLASS=CustomSX1262
-D WRAPPER_CLASS=CustomSX1262Wrapper
-D DISPLAY_CLASS=SSD1306Display

1
variants/lilygo_tbeam_SX1262/target.cpp
View file

@ -53,3 +53,4 @@ mesh::LocalIdentity radio_new_identity() {
RadioNoiseListener rng(radio);
return mesh::LocalIdentity(&rng); // create new random identity
}

1
variants/lilygo_tbeam_SX1262/target.h
View file

@ -27,3 +27,4 @@ uint32_t radio_get_rng_seed();
void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
void radio_set_tx_power(int8_t dbm);
mesh::LocalIdentity radio_new_identity();

2
variants/lilygo_tbeam_SX1276/target.cpp
View file

@ -57,4 +57,4 @@ void radio_set_tx_power(int8_t dbm) {
mesh::LocalIdentity radio_new_identity() {
RadioNoiseListener rng(radio);
return mesh::LocalIdentity(&rng); // create new random identity
}
}

2
variants/lilygo_tbeam_SX1276/target.h
View file

@ -26,4 +26,4 @@ bool radio_init();
uint32_t radio_get_rng_seed();
void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
void radio_set_tx_power(int8_t dbm);
mesh::LocalIdentity radio_new_identity();
mesh::LocalIdentity radio_new_identity();

1
variants/lilygo_tbeam_supreme_SX1262/platformio.ini
View file

@ -7,6 +7,7 @@ build_flags =
-D TBEAM_SUPREME_SX1262
-D SX126X_CURRENT_LIMIT=140
-D SX126X_RX_BOOSTED_GAIN=1
-D USE_SX1262
-D RADIO_CLASS=CustomSX1262
-D WRAPPER_CLASS=CustomSX1262Wrapper
-D DISPLAY_CLASS=SH1106Display

1
variants/lilygo_tbeam_supreme_SX1262/target.cpp
View file

@ -50,3 +50,4 @@ mesh::LocalIdentity radio_new_identity() {
RadioNoiseListener rng(radio);
return mesh::LocalIdentity(&rng); // create new random identity
}

2
variants/lilygo_tbeam_supreme_SX1262/target.h
View file

@ -24,4 +24,4 @@ bool radio_init();
uint32_t radio_get_rng_seed();
void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
void radio_set_tx_power(int8_t dbm);
mesh::LocalIdentity radio_new_identity();
mesh::LocalIdentity radio_new_identity();

1
variants/lilygo_tdeck/platformio.ini
View file

@ -11,6 +11,7 @@ build_flags =
-D ARDUINO_USB_CDC_ON_BOOT=1
-D PIN_USER_BTN=0 ; Trackball button
-D PIN_PERF_POWERON=10 ; Peripheral power pin
-D USE_SX1262
-D RADIO_CLASS=CustomSX1262
-D WRAPPER_CLASS=CustomSX1262Wrapper
-D LORA_TX_POWER=22

2
variants/lilygo_tdeck/target.cpp
View file

@ -52,4 +52,4 @@ void radio_set_tx_power(int8_t dbm) {
mesh::LocalIdentity radio_new_identity() {
RadioNoiseListener rng(radio);
return mesh::LocalIdentity(&rng); // create new random identity
}
}

2
variants/lilygo_tdeck/target.h
View file

@ -28,4 +28,4 @@ bool radio_init();
uint32_t radio_get_rng_seed();
void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
void radio_set_tx_power(int8_t dbm);
mesh::LocalIdentity radio_new_identity();
mesh::LocalIdentity radio_new_identity();

1
variants/lilygo_techo/target.cpp
View file

@ -51,3 +51,4 @@ mesh::LocalIdentity radio_new_identity() {
return mesh::LocalIdentity(&rng); // create new random identity
}

1
variants/lilygo_techo/target.h
View file

@ -29,3 +29,4 @@ uint32_t radio_get_rng_seed();
void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
void radio_set_tx_power(int8_t dbm);
mesh::LocalIdentity radio_new_identity();

1
variants/lilygo_techo_lite/target.cpp
View file

@ -50,3 +50,4 @@ mesh::LocalIdentity radio_new_identity() {
return mesh::LocalIdentity(&rng); // create new random identity
}

1
variants/lilygo_techo_lite/target.h
View file

@ -29,3 +29,4 @@ uint32_t radio_get_rng_seed();
void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
void radio_set_tx_power(int8_t dbm);
mesh::LocalIdentity radio_new_identity();

Some files were not shown because too many files have changed in this diff Show more