meshcore-dev/MeshCore
1
0
Fork 0
mirror of https://github.com/meshcore-dev/MeshCore.git synced 2026-04-20 22:13:47 +00:00
Code Issues Projects Releases Packages Wiki Activity

allow to set lower LoRa frequency

Browse source
This commit is contained in:
Rastislav Vysoky 2026-03-22 13:54:42 +01:00
parent 1ccb054aeb
commit 285fc685c5
2 changed files with 13 additions and 13 deletions
Download patch file Download diff file Expand all files Collapse all files

14
src/helpers/CommonCLI.cpp
View file

@ -95,7 +95,7 @@ void CommonCLI::loadPrefsInt(FILESYSTEM* fs, const char* filename) {
_prefs->tx_delay_factor = constrain(_prefs->tx_delay_factor, 0, 2.0f);
_prefs->direct_tx_delay_factor = constrain(_prefs->direct_tx_delay_factor, 0, 2.0f);
_prefs->airtime_factor = constrain(_prefs->airtime_factor, 0, 9.0f);
_prefs->freq = constrain(_prefs->freq, 400.0f, 2500.0f);
_prefs->freq = constrain(_prefs->freq, 150.0f, 2500.0f);
_prefs->bw = constrain(_prefs->bw, 7.8f, 500.0f);
_prefs->sf = constrain(_prefs->sf, 5, 12);
_prefs->cr = constrain(_prefs->cr, 5, 8);
@ -275,7 +275,7 @@ void CommonCLI::handleCommand(uint32_t sender_timestamp, const char* command, ch
uint8_t sf = num > 2 ? atoi(parts[2]) : 0;
uint8_t cr = num > 3 ? atoi(parts[3]) : 0;
int temp_timeout_mins = num > 4 ? atoi(parts[4]) : 0;
if (freq >= 300.0f && freq <= 2500.0f && sf >= 5 && sf <= 12 && cr >= 5 && cr <= 8 && bw >= 7.0f && bw <= 500.0f && temp_timeout_mins > 0) {
if (freq >= 150.0f && freq <= 2500.0f && sf >= 5 && sf <= 12 && cr >= 5 && cr <= 8 && bw >= 7.0f && bw <= 500.0f && temp_timeout_mins > 0) {
_callbacks->applyTempRadioParams(freq, bw, sf, cr, temp_timeout_mins);
sprintf(reply, "OK - temp params for %d mins", temp_timeout_mins);
} else {
@ -535,7 +535,7 @@ void CommonCLI::handleCommand(uint32_t sender_timestamp, const char* command, ch
float bw = num > 1 ? strtof(parts[1], nullptr) : 0.0f;
uint8_t sf = num > 2 ? atoi(parts[2]) : 0;
uint8_t cr = num > 3 ? atoi(parts[3]) : 0;
if (freq >= 300.0f && freq <= 2500.0f && sf >= 5 && sf <= 12 && cr >= 5 && cr <= 8 && bw >= 7.0f && bw <= 500.0f) {
if (freq >= 150.0f && freq <= 2500.0f && sf >= 5 && sf <= 12 && cr >= 5 && cr <= 8 && bw >= 7.0f && bw <= 500.0f) {
_prefs->sf = sf;
_prefs->cr = cr;
_prefs->freq = freq;
@ -720,7 +720,7 @@ void CommonCLI::handleCommand(uint32_t sender_timestamp, const char* command, ch
}
} else if (memcmp(command, "sensor set ", 11) == 0) {
strcpy(tmp, &command[11]);
const char *parts[2];
const char *parts[2];
int num = mesh::Utils::parseTextParts(tmp, parts, 2, ' ');
const char *key = (num > 0) ? parts[0] : "";
const char *value = (num > 1) ? parts[1] : "null";
@ -743,7 +743,7 @@ void CommonCLI::handleCommand(uint32_t sender_timestamp, const char* command, ch
dp = strchr(dp, 0);
int i;
for (i = start; i < end && (dp-reply < 134); i++) {
sprintf(dp, "%s=%s\n",
sprintf(dp, "%s=%s\n",
_sensors->getSettingName(i),
_sensors->getSettingValue(i));
dp = strchr(dp, 0);
@ -823,8 +823,8 @@ void CommonCLI::handleCommand(uint32_t sender_timestamp, const char* command, ch
bool active = !strcmp(_sensors->getSettingByKey("gps"), "1");
if (enabled) {
sprintf(reply, "on, %s, %s, %d sats",
active?"active":"deactivated",
fix?"fix":"no fix",
active?"active":"deactivated",
fix?"fix":"no fix",
sats);
} else {
strcpy(reply, "off");