Remove unrelated CLI changes from PR branch

docs/cli_commands.md

@@ -30,16 +30,6 @@ This document provides an overview of CLI commands that can be sent to MeshCore
 
 ---
 
-### Enter the UF2 bootloader (nRF52 only)
-**Usage:**
-- `uf2reset`
-
-**Serial Only:** Yes
-
-**Note:** Reboots directly into the UF2 bootloader on supported nRF52 boards.
-
----
-
 ### Reset the clock and reboot
 **Usage:**
 - `clkreboot`

src/helpers/CommonCLI.cpp

@@ -4,29 +4,6 @@
 #include "AdvertDataHelpers.h"
 #include <RTClib.h>
 
-#if defined(NRF52_PLATFORM)
-#include <nrf.h>
-#include <nrf_soc.h>
-
-#ifndef DFU_MAGIC_UF2_RESET
-#define DFU_MAGIC_UF2_RESET 0x57
-#endif
-
-static void resetToUf2Bootloader() {
-  uint8_t sd_enabled = 0;
-  sd_softdevice_is_enabled(&sd_enabled);
-
-  if (sd_enabled) {
-    sd_power_gpregret_clr(0, 0xFF);
-    sd_power_gpregret_set(0, DFU_MAGIC_UF2_RESET);
-  } else {
-    NRF_POWER->GPREGRET = DFU_MAGIC_UF2_RESET;
-  }
-
-  NVIC_SystemReset();
-}
-#endif
-
 #ifndef BRIDGE_MAX_BAUD
 #define BRIDGE_MAX_BAUD 115200
 #endif
@@ -233,12 +210,6 @@ void CommonCLI::handleCommand(uint32_t sender_timestamp, const char* command, ch
       _board->powerOff();  // doesn't return
     } else if (memcmp(command, "reboot", 6) == 0) {
       _board->reboot();  // doesn't return
-    } else if (sender_timestamp == 0 && memcmp(command, "uf2reset", 8) == 0 && (command[8] == 0 || command[8] == ' ')) {  // from serial command line only
-#if defined(NRF52_PLATFORM)
-      resetToUf2Bootloader();  // doesn't return
-#else
-      strcpy(reply, "ERR: unsupported");
-#endif
     } else if (memcmp(command, "clkreboot", 9) == 0) {
       // Reset clock
       getRTCClock()->setCurrentTime(1715770351);  // 15 May 2024, 8:50pm