This MeshCore FAQ is also mirrored at https://github.com/LitBomb/MeshCore-FAQ and might have newer updates if pull requests on Scott's MeshCore repo are not approved yet.
- [4.1. Q: Is there a user guide for T-Deck, T-Pager, T-Watch, or T-Display Pro?](#41-q-is-there-a-user-guide-for-t-deck-t-pager-t-watch-or-t-display-pro)
- [4.2. Q: What are the steps to get a T-Deck into DFU (Device Firmware Update) mode?](#42-q-what-are-the-steps-to-get-a-t-deck-into-dfu-device-firmware-update-mode)
- [4.3. Q: Why is my T-Deck Plus not getting any satellite lock?](#43-q-why-is-my-t-deck-plus-not-getting-any-satellite-lock)
- [4.4. Q: Why is my OG (non-Plus) T-Deck not getting any satellite lock?](#44-q-why-is-my-og-non-plus-t-deck-not-getting-any-satellite-lock)
- [4.5. Q: What size of SD card does the T-Deck support?](#45-q-what-size-of-sd-card-does-the-t-deck-support)
- [4.6. Q: what is the public key for the default public channel?](#46-q-what-is-the-public-key-for-the-default-public-channel)
- [4.7. Q: How do I get maps on T-Deck?](#47-q-how-do-i-get-maps-on-t-deck)
- [4.8. Q: Where do the map tiles go?](#48-q-where-do-the-map-tiles-go)
- [4.9. Q: How to unlock deeper map zoom and server management features on T-Deck?](#49-q-how-to-unlock-deeper-map-zoom-and-server-management-features-on-t-deck)
- [4.10. Q: How to decipher the diagnostics screen on T-Deck?](#410-q-how-to-decipher-the-diagnostics-screen-on-t-deck)
- [4.11. Q: The T-Deck sound is too loud?](#411-q-the-t-deck-sound-is-too-loud)
- [4.12. Q: Can you customize the sound?](#412-q-can-you-customize-the-sound)
- [4.13. Q: What is the 'Import from Clipboard' feature on the t-deck and is there a way to manually add nodes without having to receive adverts?](#413-q-what-is-the-import-from-clipboard-feature-on-the-t-deck-and-is-there-a-way-to-manually-add-nodes-without-having-to-receive-adverts)
- [4.14. Q: How to capture a screenshot on T-Deck?](#414-q-how-to-capture-a-screenshot-on-t-deck)
- [5.3. Q: What happens when a node learns a route via a mobile repeater, and that repeater is gone?](#53-q-what-happens-when-a-node-learns-a-route-via-a-mobile-repeater-and-that-repeater-is-gone)
- [5.4. Q: How does a node discovery a path to its destination and then use it to send messages in the future, instead of flooding every message it sends like Meshtastic?](#54-q-how-does-a-node-discovery-a-path-to-its-destination-and-then-use-it-to-send-messages-in-the-future-instead-of-flooding-every-message-it-sends-like-meshtastic)
- [5.5. Q: Do public channels always flood? Do private channels always flood?](#55-q-do-public-channels-always-flood-do-private-channels-always-flood)
- [5.6. Q: what is the public key for the default public channel?](#56-q-what-is-the-public-key-for-the-default-public-channel)
- [5.7. Q: Is MeshCore open source?](#57-q-is-meshcore-open-source)
- [5.8. Q: How can I support MeshCore?](#58-q-how-can-i-support-meshcore)
- [5.9. Q: How do I build MeshCore firmware from source?](#59-q-how-do-i-build-meshcore-firmware-from-source)
- [5.10. Q: Are there other MeshCore related open source projects?](#510-q-are-there-other-meshcore-related-open-source-projects)
- [5.11. Q: Does MeshCore support ATAK](#511-q-does-meshcore-support-atak)
- [5.12. Q: How do I add a node to the MeshCore Map](#512-q-how-do-i-add-a-node-to-the-meshcore-map)
- [5.13. Q: Can I use a Raspberry Pi to update a MeshCore radio?](#513-q-can-i-use-a-raspberry-pi-to-update-a-meshcore-radio)
- [5.14. Q: Are there are projects built around MeshCore?](#514-q-are-there-are-projects-built-around-meshcore)
- [5.14.1. meshcoremqtt](#5141-meshcoremqtt)
- [5.14.2. MeshCore for Home Assistant](#5142-meshcore-for-home-assistant)
- [6.1. Q: My client says another client or a repeater or a room server was last seen many, many days ago.](#61-q-my-client-says-another-client-or-a-repeater-or-a-room-server-was-last-seen-many-many-days-ago)
- [6.2. Q: A repeater or a client or a room server I expect to see on my discover list (on T-Deck) or contact list (on a smart device client) are not listed.](#62-q-a-repeater-or-a-client-or-a-room-server-i-expect-to-see-on-my-discover-list-on-t-deck-or-contact-list-on-a-smart-device-client-are-not-listed)
- [6.4. Q: My companion isn't showing up over Bluetooth?](#64-q-my-companion-isnt-showing-up-over-bluetooth)
- [6.5. Q: I can't connect via Bluetooth, what is the Bluetooth pairing code?](#64-q-i-cant-connect-via-bluetooth-what-is-the-bluetooth-pairing-code)
- [6.6. Q: My Heltec V3 keeps disconnecting from my smartphone. It can't hold a solid Bluetooth connection.](#65-q-my-heltec-v3-keeps-disconnecting-from-my-smartphone--it-cant-hold-a-solid-bluetooth-connection)
- [6.7. Q: My RAK/T1000-E/xiao\_nRF52 device seems to be corrupted, how do I wipe it clean to start fresh?](#66-q-my-rakt1000-exiao_nrf52-device-seems-to-be-corrupted-how-do-i-wipe-it-clean-to-start-fresh)
- [6.8. Q: WebFlasher fails on Linux with failed to open](#67-q-webflasher-fails-on-linux-with-failed-to-open)
- [7.1. Q: How to update nRF (RAK, T114, Seed XIAO) repeater and room server firmware over the air using the new simpler DFU app?](#71-q-how-to-update-nrf-rak-t114-seed-xiao-repeater-and-room-server-firmware-over-the-air-using-the-new-simpler-dfu-app)
- [7.2. Q: How to update ESP32-based devices over the air?](#72-q-how-to-update-esp32-based-devices-over-the-air)
- [7.3. Q: Is there a way to lower the chance of a failed OTA device firmware update (DFU)?](#73-q-is-there-a-way-to-lower-the-chance-of-a-failed-ota-device-firmware-update-dfu)
- [7.6. Q: How do I connect to the companion via WIFI, e.g. using a heltec v3?](#76-q-how-do-i-connect-to-the-comnpanion-via-wifi-eg-using-a-heltec-v3)
**A:** MeshCore is a multi platform system for enabling secure text based communications utilising LoRa radio hardware. It can be used for Off-Grid Communication, Emergency Response & Disaster Recovery, Outdoor Activities, Tactical Security including law enforcement and private security and also IoT sensor networks. ([source](https://meshcore.co.uk/))
Some more advanced, but optional features are available on T-Deck if you register your device for a key to unlock. On the MeshCore smartphone clients for Android and iOS/iPadOS, you can unlock the wait timer for repeater and room server remote management over RF feature.
These features are completely optional and aren't needed for the core messaging experience. They're like super bonus features and to help the developers continue to work on these amazing features, they may charge a small fee for an unlock code to utilise the advanced features.
Anyone is able to build anything they like on top of MeshCore without paying anything.
MeshCore is available on a variety of 433MHz, 868MHz and 915MHz LoRa devices. For example, Lilygo T-Deck, T-Pager, RAK Wireless WisBlock RAK4631 devices (e.g. 19003, 19007, 19026), Heltec V3, Xiao S3 WIO, Xiao C3, Heltec T114, Station G2, Nano G2 Ultra, Seeed Studio T1000-E. More devices are being added regularly.
For an up-to-date list of supported devices, please go to https://flasher.meshcore.co.uk/
To use MeshCore without using a phone as the client interface, you can run MeshCore on a LiLygo's T-Deck, T-Deck Plus, T-Pager, T-Watch, or T-Display Pro. MeshCore Ultra firmware running on these devices are a complete off-grid secure communication solution.
USB Serial Companion firmware runs on a supported LoRa device and connects to a smart device or a computer over USB Serial running the MeshCore web client
Repeaters are used to extend the range of a MeshCore network. Repeater firmware runs on the same devices that run client firmware. A repeater's job is to forward MeshCore packets to the destination device. It does **not** forward or retransmit every packet it receives, unlike other LoRa mesh systems.
A repeater can be remotely administered using a T-Deck running the MeshCore firmware with remote administration features unlocked, or from a BLE Companion client connected to a smartphone running the MeshCore app.
A room server is a simple BBS server for sharing posts. T-Deck devices running MeshCore firmware or a BLE Companion client connected to a smartphone running the MeshCore app can connect to a room server.
Room servers store message history on them and push the stored messages to users. Room servers allow roaming users to come back later and retrieve message history. With channels, messages are either received when it's sent, or not received and missed if the channel user is out of range. Room servers are different and more like email servers where you can come back later and get your emails from your mail server.
A room server can be remotely administered using a T-Deck running the MeshCore firmware with remote administration features unlocked, or from a BLE Companion client connected to a smartphone running the MeshCore app.
Although room server can also repeat with the command line command `set repeat on`, it is not recommended nor encouraged. A room server with repeat set to `on` lacks the full set of repeater and remote administration features that are only available in the repeater firmware.
The recommendation is to run repeater and room server on separate devices for the best experience.
**A:** If you have one supported device, flash the BLE Companion firmware and use your device as a client. You can connect to the device using the Android or iOS client via Bluetooth. You can start communicating with other MeshCore users near you.
If you have two supported devices, and there are not many MeshCore users near you, flash both to BLE Companion firmware so you can use your devices to communicate with your near-by friends and family.
If you have two supported devices, and there are other MeshCore users nearby, you can flash one of your devices with BLE Companion firmware and flash another supported device to repeater firmware. Place the repeater high above ground to extend your MeshCore network's reach.
After you flashed the latest firmware onto your repeater device, keep the device connected to your computer via USB serial, use the console feature on the web flasher and set the frequency for your region or country, so your client can remote administer the repeater or room server over RF:
The native Android and iOS client uses the freemium model and is developed by Liam Cottle, developer of meshtastic map at [meshtastic.liamcottle.net](https://meshtastic.liamcottle.net) on [GitHub](https://github.com/liamcottle/meshtastic-map) and [reticulum-meshchat on github](https://github.com/liamcottle/reticulum-meshchat).
The T-Deck firmware is free to download and most features are available without cost. To support the firmware developer, you can pay for a registration key to unlock your T-Deck for deeper map zoom and remote server administration over RF using the T-Deck. You do not need to pay for the registration to use your T-Deck for direct messaging and connecting to repeaters and room servers.
**A:** It supports the 868MHz range in the UK/EU and the 915MHz range in New Zealand, Australia, and the USA. Countries and regions in these two frequency ranges are also supported. The firmware and client allow users to set their preferred frequency.
In UK and EU, 867.5MHz is not allowed to use 250kHz bandwidth and it only allows 2.5% duty cycle for clients. 869.525Mhz allows an airtime of 10%, 250KHz bandwidth, and a higher EIRP, therefore MeshCore nodes can send more often and with more power. That is why this frequency is chosen for UK and EU. This is also why Meshtastic also uses this frequency.
(Originally MeshCore started with SF 10. recently (as of late April 2025) the community has advocated SF 11 also a viable option for longer range but a little slower transmission. Currently there are MeshCore meshes with SF 10 and SF 11. Liam Cottle's smartphone app's presets now recommend SF 10 for Australia and SF 11 for all other regions and countries. EU and UK has SF 10 and SF 11 presets. Work with your local meshers on deciding with SF number is best for your use cases. In the future, there may be bridge nodes that can bridge SF 10 and SF 11 (or even different frequencies) traffic.)
Advert means to advertise yourself on the network. In Reticulum terms it would be to announce. In Meshtastic terms it would be the node sending its node info.
MeshCore allows you to manually broadcast your name, position and public encryption key, which is also signed to prevent spoofing. When you click the advert button, it broadcasts that data over LoRa. MeshCore calls that an Advert. There's two ways to advert, "zero hop" and "flood".
* Zero hop means your advert is broadcasted out to anyone that can hear it, and that's it.
MeshCore clients only advertise themselves when the user initiates it. A repeater sends a flood advert once every 3 hours by default. This interval can be configured using the following command:
**A:** Internally the firmware has maximum limit of 64 hops. In real world settings it will be difficult to get close to the limit due to the environments and timing as packets travel further and further. We want to hear how far your MeshCore conversations go.
### 3.1. Q: How do you configure a repeater or a room server?
**A:** - When MeshCore is flashed onto a LoRa device is for the first time, it is necessary to set the server device's frequency to make it utilize the frequency that is legal in your country or region.
Repeater or room server can be administered with one of the options below:
- After a repeater or room server firmware is flashed on to a LoRa device, go to <https://config.meshcore.dev> and use the web user interface to connect to the LoRa device via USB serial. From there you can set the name of the server, its frequency and other related settings, location, passwords etc.
- Connect the server device using a USB cable to a computer running Chrome on https://flasher.meshcore.co.uk/, then use the `console` feature to connect to the device
- Use a MeshCore smartphone clients to remotely administer servers via LoRa.
- A T-Deck running unlocked/registered MeshCore firmware. Remote server administration is enabled through registering your T-Deck with Ripple Radios. It is one of the ways to support MeshCore development. You can register your T-Deck at:
<https://buymeacoffee.com/ripplebiz/e/249834>
### 3.2. Q: Do I need to set the location for a repeater?
**A:** For T-Deck Plus, the GPS baud rate should be set to **38400**. Also, some T-Deck Plus devices were found to have the GPS module installed upside down, with the GPS antenna facing down instead of up. If your T-Deck Plus still doesn't get any satellite lock after setting the baud rate to 38400, you might need to open the device to check the GPS orientation.
GPS on T-Deck is always enabled. You can skip the "GPS clock sync" and the T-Deck will continue to try to get a GPS lock. You can go to the `GPS Info` screen; you should see the `Sentences:` counter increasing if the baud rate is correct.
**A:** The OG (non-Plus) T-Deck doesn't come with a GPS. If you added a GPS to your OG T-Deck, please refer to the manual of your GPS to see what baud rate it requires. Alternatively, you can try to set the baud rate from 9600, 19200, etc., and up to 115200 to see which one works.
**A:** You can download, install, and use the T-Deck firmware for free, but it has some features (map zoom, server administration) that are enabled if you purchase an unlock code for \$10 per T-Deck device.
**A:** 'Import from Clipboard' is for importing a contact via a file named 'clipboard.txt' on the SD card. The opposite, is in the Identity screen, the 'Card to Clipboard' menu, which writes to 'clipboard.txt' so you can share yourself (call these 'biz cards', that start with "meshcore://...")
### 4.14. Q: How to capture a screenshot on T-Deck?
**A:** To capture a screenshot on a T-Deck, long press the top-left corner of the screen. The screenshot is saved to the microSD card, if one is inserted into the device.
**BW is bandwidth** - width of frequency spectrum that is used for transmission
**SF is spreading factor** - how much should the communication spread in time
**CR is coding rate** - https://www.thethingsnetwork.org/docs/lorawan/fec-and-code-rate/
Making the bandwidth 2x wider (from BW125 to BW250) allows you to send 2x more bytes in the same time. Making the spreading factor 1 step lower (from SF10 to SF9) allows you to send 2x more bytes in the same time.
Lowering the spreading factor makes it more difficult for the gateway to receive a transmission, as it will be more sensitive to noise. You could compare this to two people taking in a noisy place (a bar for example). If you’re far from each other, you have to talk slow (SF10), but if you’re close, you can talk faster (SF7)
**A:** No, MeshCore clients do not repeat. This is the core of MeshCore's messaging-first design. This is to avoid devices flooding the air ware and create endless collisions, so messages sent aren't received.
**A:** If you used to reach a node through a repeater and the repeater is no longer reachable, the client will send the message using the existing (but now broken) known path, the message will fail after 3 retries, and the app will reset the path and send the message as flood on the last retry by default. This can be turned off in settings. If the destination is reachable directly or through another repeater, the new path will be used going forward. Or you can set the path manually if you know a specific repeater to use to reach that destination.
In the case if users are moving around frequently, and the paths are breaking, they just see the phone client retries and revert to flood to attempt to re-establish a path.
### 5.4. Q: How does a node discovery a path to its destination and then use it to send messages in the future, instead of flooding every message it sends like Meshtastic?
Routes are stored in sender's contact list. When you send a message the first time, the message first gets to your destination by flood routing. When your destination node gets the message, it will send back a delivery report to the sender with all repeaters that the original message went through. This delivery report is flood-routed back to you the sender and is a basis for future direct path. When you send the next message, the path will get embedded into the packet and be evaluated by repeaters. If the hop and address of the repeater matches, it will retransmit the message, otherwise it will not retransmit, hence minimizing utilization.
**A:** Yes, group channels are A to B, so there is no defined path. They have to flood. Repeaters can however deny flood traffic up to some hop limit, with the `set flood.max` CLI command. Administrators of repeaters get to set the rules of their repeaters.
**A:** Provide your honest feedback on GitHub and on [MeshCore Discord server](https://discord.gg/BMwCtwHj5V). Spread the word of MeshCore to your friends and communities; help them get started with MeshCore. Support Scott's MeshCore development at <https://buymeacoffee.com/ripplebiz>.
Support Liam Cottle's smartphone client development by unlocking the server administration wait gate with in-app purchase
Support Rastislav Vysoky (recrof)'s flasher web site and the map web site development through [PayPal](https://www.paypal.com/donate/?business=DREHF5HM265ES&no_recurring=0&item_name=If+you+enjoy+my+work%2C+you+can+support+me+here%3A¤cy_code=EUR) or [Revolut](https://revolut.me/recrof)
clients do not repeat and therefore you would need a network of repeaters in place
will not have a stable path where all clients are constantly moving between repeaters
MeshCore clients would need to reset path constantly and flood traffic across the network which could lead to lots of collisions with something as chatty as ATAK.
This could change in the future if MeshCore develops a client firmware that repeats.
To add a BLE Companion radio, connect to the BLE Companion radio from the MeshCore smartphone app. In the app, tap the `3 dot` menu icon at the top right corner, then tap `Internet Map`. Tap the `3 dot` menu icon again and choose `Add me to the Map`
To add a Repeater or Room Server to the map, go to the Contact List, tap the `3 dot` next to the Repeater or Room Server you want to add to the Internet Map, tap `Share`, then tap `Upload to Internet Map`.
You can use the same companion (same public key) that you used to add your repeaters or room servers to remove them from the Internet Map.
- Merged bin overwrites everything including the bootloader, existing Bluetooth pairing database, but keeps configurations.
- Right click on the file name and copy the link and note it for later use here is an example: `https://flasher.meshcore.dev/releases/download/companion-v1.7.1/Heltec_v3_companion_radio_ble-v1.7.1-165fb33.bin`
- Run:
-`wget https://flasher.meshcore.dev/releases/download/companion-v1.7.1/Heltec_v3_companion_radio_ble-v1.7.1-165fb33.bin` to download the firmware file for your device type. or the version you need - USB, BLE, Repeater, Room Server, merged bin or non-merged bin
- If the above wget command only downloads a very small file (10K bytes instead of more than 100K byte, use this command instead:
- Right click on the file name and copy the link and note it for later use here is an example: `https://flasher.meshcore.dev/releases/download/companion-v1.7.1/RAK_4631_companion_radio_ble-v1.7.1-165fb33.zip`
- Run:
-`wget https://flasher.meshcore.dev/releases/download/companion-v1.7.1/RAK_4631_companion_radio_ble-v1.7.1-165fb33.zip` to download the firmware file for your device type. or the version you need - USB, BLE, Repeater, Room Server, ZIP file only
- Confirm the `ttyXXXX` device path on your Raspberry Pi:
- Go to `/dev` directory, run ls command to find confirm your device path
To manage a repeater or room server connected to a Pi over USB serial using shell commands, you need to install `picocom`. To install `picocom`, run the following command:
-`sudo apt install picocom`
To start managing your USB serial-connected device using picocom, use the following command:
-`picocom -b 115200 /dev/ttyUSB0 --imap lfcrlf`
From here, reference repeater and room server command line commands on MeshCore github wiki here:
A custom Home Assistant integration for MeshCore mesh radio nodes. It allows you to monitor and control MeshCore nodes via USB, BLE, or TCP connections.
https://github.com/awolden/meshcore-ha
#### 5.14.3. Python MeshCore
Bindings to access your MeshCore companion radio nodes in python.
### 6.1. Q: My client says another client or a repeater or a room server was last seen many, many days ago.
### 6.2. Q: A repeater or a client or a room server I expect to see on my discover list (on T-Deck) or contact list (on a smart device client) are not listed.
- If your client is a T-Deck, it may not have its time set (no GPS installed, no GPS lock, or wrong GPS baud rate).
- If you are using the Android or iOS client, the other client, repeater, or room server may have the wrong time.
You can get the epoch time on <https://www.epochconverter.com/> and use it to set your T-Deck clock. For a repeater and room server, the admin can use a T-Deck to remotely set their clock (clock sync), or use the `time` command in the USB serial console with the server device connected.
### 6.3. Q: How to connect to a repeater via BLE (Bluetooth)?
**A:** You can't connect to a device running repeater firmware via Bluetooth. Devices running the BLE companion firmware you can connect to it via Bluetooth using the android app
**A:** Heltec V3 has a very small coil antenna on its PCB for Wi-Fi and Bluetooth connectivity. It has a very short range, only a few feet. It is possible to remove the coil antenna and replace it with a 31mm wire. The BT range is much improved with the modification.
- For Xiao nRF52, click the reset button once. If that doesn't work, quickly double click the reset button twice. If that doesn't work, disconnection the board from your PC and reconnect again ([seeed studio wiki](https://wiki.seeedstudio.com/XIAO_BLE/#access-the-swd-pins-for-debugging-and-reflashing-bootloader))
5. A new folder will appear on your computer's desktop
6. Download the `flash_erase*.uf2` file for your device on flasher.meshcore.co.uk
- RAK WisBlock and Heltec T114: `Flash_erase-nRF32_softdevice_v6.uf2`
- Seeed Studio Xiao nRF52 WIO: `Flash_erase-nRF52_softdevice_v7.uf2`
8. drag and drop the uf2 file for your device to the root of the new folder
9. Wait for the copy to complete. You might get an error dialog, you can ignore it
10. Go to https://flasher.meshcore.co.uk/, click `Console` and select the serial port for your connected device
11. In the console, press enter. Your flash should now be erased
12. You may now flash the latest MeshCore firmware onto your device
Separately, starting in firmware version 1.7.0, there is a CLI Rescue mode. If your device has a user button (e.g. some RAK, T114), you can activate the rescue mode by hold down the user button of the device within 8 seconds of boot. Then you can use the 'Console' on flasher.meshcore.co.uk
1. Download nRF's DFU app from iOS App Store or Android's Play Store, you can find the app by searching for `nrf dfu`, the app's full name is `nRF Device Firmware Update`
2. On flasher.meshcore.co.uk, download the **ZIP** version of the firmware for your nRF device (e.g. RAK or Heltec T114 or Seeed Studio's Xiao)
1. On flasher.meshcore.co.uk, download the **non-merged** version of the firmware for your ESP32 device (e.g. `Heltec_v3_repeater-v1.6.2-4449fd3.bin`, no `"merged"` in the file name)
**A:** Yes, developer `che aporeps` has an enhanced OTA DFU bootloader for nRF52 based devices. With this bootloader, if it detects that the application firmware is invalid, it falls back to OTA DFU mode so you can attempt to flash again to recover. This bootloader has other changes to make the OTA DFU process more fault tolerant.
Refer to https://github.com/oltaco/Adafruit_nRF52_Bootloader_OTAFIX for the latest information.
