; Common settings for ESP targes, mixin with extends = esp32_base
[esp32_base]
extends = arduino_base
platform = platformio/espressif32 @ 6.3.2

build_src_filter = 
  ${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2040> -<mesh/eth/>

upload_speed = 921600
debug_init_break = tbreak setup
monitor_filters = esp32_exception_decoder

;board_build.filesystem = littlefs

# Remove -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL for low level BLE logging.
# See library directory for BLE logging possible values: .pio/libdeps/tbeam/NimBLE-Arduino/src/log_common/log_common.h
# This overrides the BLE logging default of LOG_LEVEL_INFO (1) from: .pio/libdeps/tbeam/NimBLE-Arduino/src/esp_nimble_cfg.h
build_flags =
  ${arduino_base.build_flags}
  -Wall
;  -Wextra
  -Isrc/platform/esp32
  -std=c++2a
;  -std=c++11
  -DLOG_LOCAL_LEVEL=ESP_LOG_DEBUG
  -DCORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_DEBUG
  -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL
  -DAXP_DEBUG_PORT=Serial
  -DCONFIG_BT_NIMBLE_ENABLED
  -DCONFIG_NIMBLE_CPP_LOG_LEVEL=2
  -DCONFIG_BT_NIMBLE_MAX_CCCDS=20
  -DCONFIG_BT_NIMBLE_HOST_TASK_STACK_SIZE=5120
  -DESP_OPENSSL_SUPPRESS_LEGACY_WARNING
  -DSERIAL_BUFFER_SIZE=4096
  ;-DDEBUG_HEAP

;lib_deps =
;  ${arduino_base.lib_deps}
;  ${networking_base.lib_deps}
;  ${environmental_base.lib_deps}
;  h2zero/NimBLE-Arduino@^1.4.1
;  jgromes/RadioLib@^6.1.0
;  https://github.com/lewisxhe/XPowersLib.git#84b7373faea3118b6c37954d52f98b8a337148d6

;lib_ignore = 
;  segger_rtt
;  ESP32 BLE Arduino

; leave this commented out to avoid breaking Windows
;upload_port = /dev/ttyUSB0
;monitor_port = /dev/ttyUSB0

; customize the partition table
; http://docs.platformio.org/en/latest/platforms/espressif32.html#partition-tables
;board_build.partitions = partition-table.csv