diff --git a/Displays.md b/Displays.md
new file mode 100644
index 0000000..21ad6f8
--- /dev/null
+++ b/Displays.md
@@ -0,0 +1,10 @@
+If your board does not come with a display, you will need to obtain an SSD1306 display separately.  The SSD1306 OLED displays are made in two different pin oderings.  The preferred OLED displays have the following pin order: VCC-GND-SCL-SDA.  They can be soldered into TTGO T-Beams directly.  The OLED displays with the GND-VCC-SCL-SDA pin order need to be soldered in such a way that display does not get reverse-polarity on the power terminals.
+
+# SSD1306 OLED with VCC-GND-SCL-SDA pin order (preferred)
+![SSD1306 VCC-GND-SCL-SDA OLED](https://user-images.githubusercontent.com/3480859/184472377-ec0e1f14-72da-4e5c-957b-54164bec3400.jpg)
+
+# SSD1306 OLED with GND-VCC-SCL-SDA pin order
+![SSD1306-GND-VCC-SCL_SDA](https://user-images.githubusercontent.com/3480859/184472625-491d9220-3dba-4038-913b-c26356184e4b.PNG)
+
+In order to use this OLED display, solder the OLED board this way:
+![SSD1306 GND-VCC-SCL-SDA OLED](https://user-images.githubusercontent.com/3480859/184472168-ab97ba4a-4cbd-4e3f-bed6-7ce6a73a5339.jpg)
\ No newline at end of file