Update README.md

Bump ArduinoJson from 6.21.3 to 7.0.4

.github/workflows/buid_check.yml

@@ -8,6 +8,7 @@ on:
   pull_request:
     branches:
       - master
+  merge_group:
 
 jobs:
   build:

README.md

@@ -1,3 +1,14 @@
+# Status update – September 2025
+
+Over the past year, my focus has shifted to other projects, and I’ve decided it’s time to close the chapter on this one. I will no longer provide updates or support, and the repository will be archived.
+
+This project has been a fun journey, and I’d like to thank everyone who used, contributed, or shared feedback along the way. Your interest and support kept it alive far longer than I originally expected.
+
+If you’re looking for a great alternative, I recommend [CA2RXU LoRa APRS Tracker/Station](https://github.com/richonguzman/LoRa_APRS_Tracker).
+
+73,
+OE5BPA
+
 # LoRa APRS Tracker
 
 The LoRa APRS Tracker will work with very cheep hardware which you can buy from amazon, ebay or aliexpress.

platformio.ini

@@ -2,19 +2,19 @@
 default_envs = ttgo-t-beam-v1
 
 [env]
-platform = espressif32 @ 6.3.2
+platform = espressif32 @ 6.7.0
 framework = arduino
 lib_ldf_mode = deep+
 monitor_speed = 115200
 monitor_filters = esp32_exception_decoder
 lib_deps = 
-	adafruit/Adafruit GFX Library @ 1.11.7
-	adafruit/Adafruit SSD1306 @ 2.5.7
-	bblanchon/ArduinoJson @ 6.21.2
-	lewisxhe/XPowersLib @ 0.1.8
+	adafruit/Adafruit GFX Library @ 1.11.9
+	adafruit/Adafruit SSD1306 @ 2.5.10
+	bblanchon/ArduinoJson @ 7.0.4
+	lewisxhe/XPowersLib @ 0.2.4
 	sandeepmistry/LoRa @ 0.8.0
 	peterus/APRS-Decoder-Lib @ 0.0.6
-	mikalhart/TinyGPSPlus @ 1.0.3
+	mikalhart/TinyGPSPlus @ 1.1.0
 	paulstoffregen/Time @ 1.6
 	shaggydog/OneButton @ 1.5.0
 	peterus/esp-logger @ 1.0.0

src/LoRa_APRS_Tracker.cpp

@@ -367,6 +367,9 @@ void loop() {
            would lead to decrease of beacon rate in between 5 to 20 km/h. what
            is even below the slow speed rate.
         */
+        if (curr_speed == 0) {
+          curr_speed = 1;
+        }
         txInterval = min(BeaconMan.getCurrentBeaconConfig()->smart_beacon.slow_rate,
                          BeaconMan.getCurrentBeaconConfig()->smart_beacon.fast_speed * BeaconMan.getCurrentBeaconConfig()->smart_beacon.fast_rate / curr_speed) *
                      1000;

src/power_management.cpp

@@ -146,13 +146,13 @@ bool AXP2101::begin(TwoWire &port) {
   _pmu->enablePowerOutput(XPOWERS_ALDO3);
 
   // disable all axp chip interrupt
-  _pmu->disableIRQ(XPOWERS_AXP192_ALL_IRQ);
+  _pmu->disableIRQ(XPOWERS_AXP2101_ALL_IRQ);
 
   // Set constant current charging current
-  _pmu->setChargerConstantCurr(XPOWERS_AXP192_CHG_CUR_780MA);
+  _pmu->setChargerConstantCurr(XPOWERS_AXP2101_CHG_CUR_800MA);
 
   // Set up the charging voltage
-  _pmu->setChargeTargetVoltage(XPOWERS_AXP192_CHG_VOL_4V2);
+  _pmu->setChargeTargetVoltage(XPOWERS_AXP2101_CHG_VOL_4V2);
 
   _pmu->setChargingLedMode(XPOWERS_CHG_LED_CTRL_CHG);