Add support for Nano DV board (BG4TGO & BG5HHP)

BUILD.md

@@ -548,6 +548,8 @@ modified RF7021SE and Blue Pill STM32F103).
 
 - #define NANO_HOTSPOT: enable this option if you have a Nano hotSPOT (BI7JTA).
 
+- #define NANO_DV_REV10: enable this option if you have a Nano DV (BG4TGO & BG5HHP).
+
 - #define ENABLE_ADF7021: add support for ADF7021 (all boards, enabled by default).
 
 - #define DUPLEX: enable duplex mode with dual ADF7021. It is still under development.

Config.h

@@ -30,6 +30,8 @@
 // #define MMDVM_HS_DUAL_HAT_REV10
 // 5) Nano hotSPOT (BI7JTA)
 // #define NANO_HOTSPOT
+// 6) Nano DV revisions 1.0 (BG4TGO & BG5HHP)
+// #define NANO_DV_REV10
 
 // Enable ADF7021 support:
 #define ENABLE_ADF7021

IOArduino.cpp

@@ -51,7 +51,7 @@
 #define PIN_PTT_LED    PB14
 #define PIN_COS_LED    PB15
 
-#elif defined(LIBRE_KIT_ADF7021) || defined(MMDVM_HS_HAT_REV12) || defined(MMDVM_HS_DUAL_HAT_REV10) || defined(NANO_HOTSPOT)
+#elif defined(LIBRE_KIT_ADF7021) || defined(MMDVM_HS_HAT_REV12) || defined(MMDVM_HS_DUAL_HAT_REV10) || defined(NANO_HOTSPOT) || defined(NANO_DV_REV10)
 
 #define PIN_SCLK       PB5
 #define PIN_SREAD      PB7
@@ -75,7 +75,7 @@
 #define PIN_COS_LED    PB15
 
 #else
-#error "Either ZUMSPOT_ADF7021, LIBRE_KIT_ADF7021, MMDVM_HS_HAT_REV12, MMDVM_HS_DUAL_HAT_REV10 or NANO_HOTSPOT need to be defined"
+#error "Either ZUMSPOT_ADF7021, LIBRE_KIT_ADF7021, MMDVM_HS_HAT_REV12, MMDVM_HS_DUAL_HAT_REV10, NANO_HOTSPOT or NANO_DV_REV10 need to be defined"
 #endif
 
 #elif defined(__MK20DX256__) || defined(__MK64FX512__) || defined(__MK66FX1M0__)
@@ -148,7 +148,7 @@ void CIO::Init()
 {
 #if defined (__STM32F1__)
 
-#if defined(ZUMSPOT_ADF7021) || defined(LIBRE_KIT_ADF7021) || defined(MMDVM_HS_HAT_REV12) || defined(MMDVM_HS_DUAL_HAT_REV10) || defined(NANO_HOTSPOT)
+#if defined(ZUMSPOT_ADF7021) || defined(LIBRE_KIT_ADF7021) || defined(MMDVM_HS_HAT_REV12) || defined(MMDVM_HS_DUAL_HAT_REV10) || defined(NANO_HOTSPOT) || defined(NANO_DV_REV10)
   afio_cfg_debug_ports(AFIO_DEBUG_SW_ONLY);
 #endif
 

IOSTM.cpp

@@ -152,7 +152,7 @@
 #define PIN_COS_LED          GPIO_Pin_15
 #define PORT_COS_LED         GPIOB
 
-#elif defined(LIBRE_KIT_ADF7021) || defined(MMDVM_HS_HAT_REV12) || defined(MMDVM_HS_DUAL_HAT_REV10) || defined(NANO_HOTSPOT)
+#elif defined(LIBRE_KIT_ADF7021) || defined(MMDVM_HS_HAT_REV12) || defined(MMDVM_HS_DUAL_HAT_REV10) || defined(NANO_HOTSPOT) || defined(NANO_DV_REV10)
 
 #define PIN_SCLK             GPIO_Pin_5
 #define PORT_SCLK            GPIOB
@@ -225,7 +225,7 @@
 #define PORT_COS_LED         GPIOB
 
 #else
-#error "Either PI_HAT_7021_REV_02, ZUMSPOT_ADF7021, LIBRE_KIT_ADF7021, MMDVM_HS_HAT_REV12, MMDVM_HS_DUAL_HAT_REV10 or NANO_HOTSPOT need to be defined"
+#error "Either PI_HAT_7021_REV_02, ZUMSPOT_ADF7021, LIBRE_KIT_ADF7021, MMDVM_HS_HAT_REV12, MMDVM_HS_DUAL_HAT_REV10, NANO_HOTSPOT or NANO_DV_REV10 need to be defined"
 #endif
 
 extern "C" {
@@ -247,7 +247,7 @@ extern "C" {
   }
 #endif
 
-#elif defined(ZUMSPOT_ADF7021) || defined(LIBRE_KIT_ADF7021) || defined(MMDVM_HS_HAT_REV12) || defined(MMDVM_HS_DUAL_HAT_REV10) || defined(NANO_HOTSPOT)
+#elif defined(ZUMSPOT_ADF7021) || defined(LIBRE_KIT_ADF7021) || defined(MMDVM_HS_HAT_REV12) || defined(MMDVM_HS_DUAL_HAT_REV10) || defined(NANO_HOTSPOT) || defined(NANO_DV_REV10)
 
 #if defined(BIDIR_DATA_PIN)
   void EXTI3_IRQHandler(void) {
@@ -284,7 +284,7 @@ void CIO::Init()
   
 #if defined(PI_HAT_7021_REV_02)
   GPIO_PinRemapConfig(GPIO_Remap_SWJ_Disable, ENABLE);
-#elif defined(ZUMSPOT_ADF7021) || defined(LIBRE_KIT_ADF7021) || defined(MMDVM_HS_HAT_REV12) || defined(MMDVM_HS_DUAL_HAT_REV10) || defined(NANO_HOTSPOT)
+#elif defined(ZUMSPOT_ADF7021) || defined(LIBRE_KIT_ADF7021) || defined(MMDVM_HS_HAT_REV12) || defined(MMDVM_HS_DUAL_HAT_REV10) || defined(NANO_HOTSPOT) || defined(NANO_DV_REV10)
   GPIO_PinRemapConfig(GPIO_Remap_SWJ_JTAGDisable, ENABLE);
 #endif
 
@@ -454,7 +454,7 @@ void CIO::Init()
   EXTI_InitStructure.EXTI_Line = EXTI_Line14;
 #endif
 
-#elif defined(ZUMSPOT_ADF7021) || defined(LIBRE_KIT_ADF7021) || defined(MMDVM_HS_HAT_REV12) || defined(MMDVM_HS_DUAL_HAT_REV10) || defined(NANO_HOTSPOT)
+#elif defined(ZUMSPOT_ADF7021) || defined(LIBRE_KIT_ADF7021) || defined(MMDVM_HS_HAT_REV12) || defined(MMDVM_HS_DUAL_HAT_REV10) || defined(NANO_HOTSPOT) || defined(NANO_DV_REV10)
 
 #if defined(BIDIR_DATA_PIN)
   // Connect EXTI3 Line
@@ -502,7 +502,7 @@ void CIO::startInt()
 
   NVIC_InitStructure.NVIC_IRQChannel = EXTI15_10_IRQn;
 
-#elif defined(ZUMSPOT_ADF7021) || defined(LIBRE_KIT_ADF7021) || defined(MMDVM_HS_HAT_REV12) || defined(MMDVM_HS_DUAL_HAT_REV10) || defined(NANO_HOTSPOT)
+#elif defined(ZUMSPOT_ADF7021) || defined(LIBRE_KIT_ADF7021) || defined(MMDVM_HS_HAT_REV12) || defined(MMDVM_HS_DUAL_HAT_REV10) || defined(NANO_HOTSPOT) || defined(NANO_DV_REV10)
 
 #if defined(BIDIR_DATA_PIN)
   // Enable and set EXTI3 Interrupt

Makefile

@@ -400,6 +400,15 @@ ifneq ($(wildcard /usr/bin/stm32flash),)
 	/usr/bin/stm32flash -v -w bin/$(BINBIN_F1) -g 0x0 -R -i 200,-3,3:-200,3 /dev/ttyAMA0
 endif
 
+nano-dv:
+ifneq ($(wildcard /usr/local/bin/stm32flash),)
+	/usr/local/bin/stm32flash -v -w bin/$(BINBIN_F1) -g 0x0 -R -i 10,-14,14:-10,14 /dev/ttyAMA0
+endif
+
+ifneq ($(wildcard /usr/bin/stm32flash),)
+	/usr/bin/stm32flash -v -w bin/$(BINBIN_F1) -g 0x0 -R -i 10,-14,14:-10,14 /dev/ttyAMA0
+endif
+
 zumspot-pi:
 ifneq ($(wildcard /usr/local/bin/stm32flash),)
 	/usr/local/bin/stm32flash -v -w bin/$(BINBIN_F1) -g 0x0 -R -i 20,-21,21:-20,21 /dev/ttyAMA0

README.md

@@ -66,6 +66,7 @@ Download the script (*.sh) that matches with your ZUMspot/MMDVM_HS board:
 - install_fw_rpi.sh: only for ZUMspot RPi board (KI6ZUM & VE2GZI)
 - install_fw_hshat.sh: only for MMDVM_HS_Hat board (DB9MAT & DF2ET)
 - install_fw_nanohs.sh: only for Nano hotSPOT board (BI7JTA)
+- install_fw_nanodv.sh: only for Nano DV board (BG4TGO & BG5HHP)
 - install_fw_hsdualhat.sh: only for MMDVM_HS_Dual_Hat board (DB9MAT & DF2ET & DO7EN)
 - install_fw_librekit.sh: only for ZUMspot Libre Kit board (KI6ZUM & VE2GZI) or generic MMDVM_HS board
 - install_fw_usb.sh: only for ZUMspot USB dongle (KI6ZUM & VE2GZI)

configs/MMDVM_HS_Dual_Hat.h

@@ -30,6 +30,8 @@
 #define MMDVM_HS_DUAL_HAT_REV10
 // 5) Nano hotSPOT (BI7JTA)
 // #define NANO_HOTSPOT
+// 6) Nano DV revisions 1.0 (BG4TGO & BG5HHP)
+// #define NANO_DV_REV10
 
 // Enable ADF7021 support:
 #define ENABLE_ADF7021

configs/MMDVM_HS_Hat.h

@@ -30,6 +30,8 @@
 // #define MMDVM_HS_DUAL_HAT_REV10
 // 5) Nano hotSPOT (BI7JTA)
 // #define NANO_HOTSPOT
+// 6) Nano DV revisions 1.0 (BG4TGO & BG5HHP)
+// #define NANO_DV_REV10
 
 // Enable ADF7021 support:
 #define ENABLE_ADF7021

configs/NanoDV.h

@@ -0,0 +1,73 @@
+/*
+ *   Copyright (C) 2018 by Andy Uribe CA6JAU
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if !defined(CONFIG_H)
+#define  CONFIG_H
+
+// Select one board (STM32F103 based boards)
+// 1) ZUMspot RPi or ZUMspot USB:
+// #define ZUMSPOT_ADF7021
+// 2) Libre Kit board or any homebrew hotspot with modified RF7021SE and Blue Pill STM32F103:
+// #define LIBRE_KIT_ADF7021
+// 3) MMDVM_HS_Hat revisions 1.1, 1.2 and 1.4 (DB9MAT & DF2ET)
+// #define MMDVM_HS_HAT_REV12
+// 4) MMDVM_HS_Dual_Hat revisions 1.0 (DB9MAT & DF2ET & DO7EN)
+// #define MMDVM_HS_DUAL_HAT_REV10
+// 5) Nano hotSPOT (BI7JTA)
+// #define NANO_HOTSPOT
+// 6) Nano DV revisions 1.0 (BG4TGO & BG5HHP)
+#define NANO_DV_REV10
+
+// Enable ADF7021 support:
+#define ENABLE_ADF7021
+
+// Enable full duplex support with dual ADF7021 (valid for homebrew hotspots only):
+// #define DUPLEX
+
+// TCXO of the ADF7021
+// For 14.7456 MHz:
+#define ADF7021_14_7456
+// For 12.2880 MHz:
+// #define ADF7021_12_2880
+
+// Host communication selection:
+#define STM32_USART1_HOST
+// #define STM32_USB_HOST
+
+// Enable mode detection:
+#define ENABLE_SCAN_MODE
+
+// Send RSSI value:
+#define SEND_RSSI_DATA
+
+// Enable Nextion LCD serial port repeater on USART2 (ZUMspot Libre Kit and ZUMspot RPi):
+#define SERIAL_REPEATER
+
+// Enable Nextion LCD serial port repeater on USART1 (Do not use with STM32_USART1_HOST enabled):
+// #define SERIAL_REPEATER_USART1
+
+// Enable P25 Wide modulation:
+// #define ENABLE_P25_WIDE
+
+// Disable mode LEDs blink during scan mode:
+// #define QUIET_MODE_LEDS
+
+// Enable modem debug messages
+// #define ENABLE_DEBUG
+
+#endif

configs/Nano_hotSPOT.h

@@ -30,6 +30,8 @@
 // #define MMDVM_HS_DUAL_HAT_REV10
 // 5) Nano hotSPOT (BI7JTA)
 #define NANO_HOTSPOT
+// 6) Nano DV revisions 1.0 (BG4TGO & BG5HHP)
+// #define NANO_DV_REV10
 
 // Enable ADF7021 support:
 #define ENABLE_ADF7021

configs/ZUMspot_Libre.h

@@ -30,6 +30,8 @@
 // #define MMDVM_HS_DUAL_HAT_REV10
 // 5) Nano hotSPOT (BI7JTA)
 // #define NANO_HOTSPOT
+// 6) Nano DV revisions 1.0 (BG4TGO & BG5HHP)
+// #define NANO_DV_REV10
 
 // Enable ADF7021 support:
 #define ENABLE_ADF7021

configs/ZUMspot_RPi.h

@@ -30,6 +30,8 @@
 // #define MMDVM_HS_DUAL_HAT_REV10
 // 5) Nano hotSPOT (BI7JTA)
 // #define NANO_HOTSPOT
+// 6) Nano DV revisions 1.0 (BG4TGO & BG5HHP)
+// #define NANO_DV_REV10
 
 // Enable ADF7021 support:
 #define ENABLE_ADF7021

configs/ZUMspot_USB.h

@@ -30,6 +30,8 @@
 // #define MMDVM_HS_DUAL_HAT_REV10
 // 5) Nano hotSPOT (BI7JTA)
 // #define NANO_HOTSPOT
+// 6) Nano DV revisions 1.0 (BG4TGO & BG5HHP)
+// #define NANO_DV_REV10
 
 // Enable ADF7021 support:
 #define ENABLE_ADF7021

configs/ZUMspot_duplex.h

@@ -30,6 +30,8 @@
 // #define MMDVM_HS_DUAL_HAT_REV10
 // 5) Nano hotSPOT (BI7JTA)
 // #define NANO_HOTSPOT
+// 6) Nano DV revisions 1.0 (BG4TGO & BG5HHP)
+// #define NANO_DV_REV10
 
 // Enable ADF7021 support:
 #define ENABLE_ADF7021

scripts/build_fw.sh

@@ -62,4 +62,10 @@ make
 mv ~/MMDVM_HS/bin/mmdvm_f1.bin ~/MMDVM_HS/bin/nano_hotspot_fw.bin
 make clean
 
+# Building Nano DV
+cp ~/MMDVM_HS/configs/NanoDV.h ~/MMDVM_HS/Config.h
+make
+mv ~/MMDVM_HS/bin/mmdvm_f1.bin ~/MMDVM_HS/bin/nano_dv_fw.bin
+make clean
+
 cp ~/MMDVM_HS/configs/ZUMspot_Libre.h ~/MMDVM_HS/Config.h

scripts/install_fw_nanodv.sh

@@ -0,0 +1,77 @@
+#!/bin/bash
+
+#   Copyright (C) 2018 by Andy Uribe CA6JAU
+
+#   This program is free software; you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation; either version 2 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program; if not, write to the Free Software
+#   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+# Configure latest version
+FW_VERSION="v1.3.3"
+
+# Change USB-serial port name ONLY in macOS
+MAC_DEV_USB_SER="/dev/cu.usbmodem1441"
+	
+# Download latest firmware for Nano DV
+curl -OL https://github.com/juribeparada/MMDVM_HS/releases/download/$FW_VERSION/nano_dv_fw.bin
+
+# Download STM32F10X_Lib (only for binary tools)
+if [ ! -d "./STM32F10X_Lib/utils" ]; then
+  git clone https://github.com/juribeparada/STM32F10X_Lib
+fi
+
+# Configure vars depending on OS
+if [ $(uname -s) == "Linux" ]; then
+	DEV_USB_SER="/dev/ttyACM0"
+	if [ $(uname -m) == "x86_64" ]; then
+		echo "Linux 64-bit detected"
+		DFU_RST="./STM32F10X_Lib/utils/linux64/upload-reset"
+		DFU_UTIL="./STM32F10X_Lib/utils/linux64/dfu-util"
+		ST_FLASH="./STM32F10X_Lib/utils/linux64/st-flash"
+		STM32FLASH="./STM32F10X_Lib/utils/linux64/stm32flash"
+	elif [ $(uname -m) == "armv7l" ]; then
+		echo "Raspberry Pi 3 detected"
+		DFU_RST="./STM32F10X_Lib/utils/rpi32/upload-reset"
+		DFU_UTIL="./STM32F10X_Lib/utils/rpi32/dfu-util"
+		ST_FLASH="./STM32F10X_Lib/utils/rpi32/st-flash"
+		STM32FLASH="./STM32F10X_Lib/utils/rpi32/stm32flash"
+	elif [ $(uname -m) == "armv6l" ]; then
+		echo "Raspberry Pi 2 or Pi Zero W detected"
+		DFU_RST="./STM32F10X_Lib/utils/rpi32/upload-reset"
+		DFU_UTIL="./STM32F10X_Lib/utils/rpi32/dfu-util"
+		ST_FLASH="./STM32F10X_Lib/utils/rpi32/st-flash"
+		STM32FLASH="./STM32F10X_Lib/utils/rpi32/stm32flash"
+	else
+		echo "Linux 32-bit detected"
+		DFU_RST="./STM32F10X_Lib/utils/linux/upload-reset"
+		DFU_UTIL="./STM32F10X_Lib/utils/linux/dfu-util"
+		ST_FLASH="./STM32F10X_Lib/utils/linux/st-flash"
+		STM32FLASH="./STM32F10X_Lib/utils/linux/stm32flash"
+	fi
+fi
+
+if [ $(uname -s) == "Darwin" ]; then
+	echo "macOS detected"
+	DEV_USB_SER=$MAC_DEV_USB_SER
+	DFU_RST="./STM32F10X_Lib/utils/macosx/upload-reset"
+	DFU_UTIL="./STM32F10X_Lib/utils/macosx/dfu-util"
+	ST_FLASH="./STM32F10X_Lib/utils/macosx/st-flash"
+	STM32FLASH="./STM32F10X_Lib/utils/macosx/stm32flash"
+fi
+
+# Stop MMDVMHost process to free serial port
+sudo killall MMDVMHost >/dev/null 2>&1
+
+# Upload the firmware
+eval sudo $STM32FLASH -v -w nano_hotspot_fw.bin -g 0x0 -R -i 10,-14,14:-10,14 /dev/ttyAMA0
+

version.h

@@ -24,8 +24,8 @@
 
 #define VER_MAJOR       "1"
 #define VER_MINOR       "3"
-#define VER_REV         "3"
+#define VER_REV         "4"
-#define VERSION_DATE    "20180224"
+#define VERSION_DATE    "20180404"
 
 #if defined(ZUMSPOT_ADF7021)
 #define BOARD_INFO      "ZUMspot"
@@ -35,6 +35,8 @@
 #define BOARD_INFO      "MMDVM_HS_Dual_Hat"
 #elif defined(NANO_HOTSPOT)
 #define BOARD_INFO      "Nano_hotSPOT"
+#elif defined(NANO_DV_REV10)
+#define BOARD_INFO      "Nano_DV"
 #else
 #define BOARD_INFO      "MMDVM_HS"
 #endif