Merge pull request #50 from phl0/12MhzDual

Add support for 12.288MHz MMDVM_HS_Dual_Hats

configs/MMDVM_HS_Dual_Hat-12mhz.h

@@ -0,0 +1,76 @@
+/*
+ *   Copyright (C) 2017,2018 by Andy Uribe CA6JAU, Florian Wolters DF2ET
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if !defined(CONFIG_H)
+#define  CONFIG_H
+
+// Select one board (STM32F103 based boards)
+// 1) ZUMspot RPi or ZUMspot USB:
+// #define ZUMSPOT_ADF7021
+// 2) Libre Kit board or any homebrew hotspot with modified RF7021SE and Blue Pill STM32F103:
+// #define LIBRE_KIT_ADF7021
+// 3) MMDVM_HS_Hat revisions 1.1, 1.2 and 1.4 (DB9MAT & DF2ET)
+// #define MMDVM_HS_HAT_REV12
+// 4) MMDVM_HS_Dual_Hat revisions 1.0 (DB9MAT & DF2ET & DO7EN)
+#define MMDVM_HS_DUAL_HAT_REV10
+// 5) Nano hotSPOT (BI7JTA)
+// #define NANO_HOTSPOT
+// 6) Nano DV revisions 1.0 (BG4TGO & BG5HHP)
+// #define NANO_DV_REV10
+
+// Enable ADF7021 support:
+#define ENABLE_ADF7021
+
+// Enable full duplex support with dual ADF7021 (valid for homebrew hotspots only):
+#define DUPLEX
+
+// TCXO of the ADF7021
+// For 14.7456 MHz:
+// #define ADF7021_14_7456
+// For 12.2880 MHz:
+#define ADF7021_12_2880
+
+// Host communication selection:
+#define STM32_USART1_HOST
+// #define STM32_USB_HOST
+
+// Enable mode detection:
+#define ENABLE_SCAN_MODE
+
+// Send RSSI value:
+#define SEND_RSSI_DATA
+
+// Enable Nextion LCD serial port repeater on USART2 (ZUMspot Libre Kit and ZUMspot RPi):
+#define SERIAL_REPEATER
+
+// Enable Nextion LCD serial port repeater on USART1 (Do not use with STM32_USART1_HOST enabled):
+// #define SERIAL_REPEATER_USART1
+
+// Enable P25 Wide modulation:
+// #define ENABLE_P25_WIDE
+
+// Disable mode LEDs blink during scan mode:
+// #define QUIET_MODE_LEDS
+
+// Constant Service LED once repeater is running 
+// #define CONSTANT_SRV_LED
+
+// Enable modem debug messages
+// #define ENABLE_DEBUG
+
+#endif

scripts/build_fw.sh

@@ -62,6 +62,12 @@ make
 mv ~/MMDVM_HS/bin/mmdvm_f1.bin ~/MMDVM_HS/bin/mmdvm_hs_dual_hat_fw.bin
 make clean
 
+# Building MMDVM_HS_Dual_Hat (12.288 MHz TCXO)
+cp ~/MMDVM_HS/configs/MMDVM_HS_Dual_Hat-12mhz.h ~/MMDVM_HS/Config.h
+make
+mv ~/MMDVM_HS/bin/mmdvm_f1.bin ~/MMDVM_HS/bin/mmdvm_hs_dual_hat_fw-12mhz.bin
+make clean
+
 # Building Nano hotSPOT
 cp ~/MMDVM_HS/configs/Nano_hotSPOT.h ~/MMDVM_HS/Config.h
 make

scripts/install_fw_hsdualhat-12mhz.sh

@@ -0,0 +1,77 @@
+#!/bin/bash
+
+#   Copyright (C) 2017,2018 by Andy Uribe CA6JAU, Florian Wolters DF2ET
+
+#   This program is free software; you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation; either version 2 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program; if not, write to the Free Software
+#   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+# Configure latest version
+FW_VERSION="v1.4.1"
+
+# Change USB-serial port name ONLY in macOS
+MAC_DEV_USB_SER="/dev/cu.usbmodem1441"
+	
+# Download latest firmware for MMDVM_HS_Hat
+curl -OL https://github.com/juribeparada/MMDVM_HS/releases/download/$FW_VERSION/mmdvm_hs_dual_hat_fw-12mhz.bin
+
+# Download STM32F10X_Lib (only for binary tools)
+if [ ! -d "./STM32F10X_Lib/utils" ]; then
+  git clone https://github.com/juribeparada/STM32F10X_Lib
+fi
+
+# Configure vars depending on OS
+if [ $(uname -s) == "Linux" ]; then
+	DEV_USB_SER="/dev/ttyACM0"
+	if [ $(uname -m) == "x86_64" ]; then
+		echo "Linux 64-bit detected"
+		DFU_RST="./STM32F10X_Lib/utils/linux64/upload-reset"
+		DFU_UTIL="./STM32F10X_Lib/utils/linux64/dfu-util"
+		ST_FLASH="./STM32F10X_Lib/utils/linux64/st-flash"
+		STM32FLASH="./STM32F10X_Lib/utils/linux64/stm32flash"
+	elif [ $(uname -m) == "armv7l" ]; then
+		echo "Raspberry Pi 3 detected"
+		DFU_RST="./STM32F10X_Lib/utils/rpi32/upload-reset"
+		DFU_UTIL="./STM32F10X_Lib/utils/rpi32/dfu-util"
+		ST_FLASH="./STM32F10X_Lib/utils/rpi32/st-flash"
+		STM32FLASH="./STM32F10X_Lib/utils/rpi32/stm32flash"
+	elif [ $(uname -m) == "armv6l" ]; then
+		echo "Raspberry Pi 2 or Pi Zero W detected"
+		DFU_RST="./STM32F10X_Lib/utils/rpi32/upload-reset"
+		DFU_UTIL="./STM32F10X_Lib/utils/rpi32/dfu-util"
+		ST_FLASH="./STM32F10X_Lib/utils/rpi32/st-flash"
+		STM32FLASH="./STM32F10X_Lib/utils/rpi32/stm32flash"
+	else
+		echo "Linux 32-bit detected"
+		DFU_RST="./STM32F10X_Lib/utils/linux/upload-reset"
+		DFU_UTIL="./STM32F10X_Lib/utils/linux/dfu-util"
+		ST_FLASH="./STM32F10X_Lib/utils/linux/st-flash"
+		STM32FLASH="./STM32F10X_Lib/utils/linux/stm32flash"
+	fi
+fi
+
+if [ $(uname -s) == "Darwin" ]; then
+	echo "macOS detected"
+	DEV_USB_SER=$MAC_DEV_USB_SER
+	DFU_RST="./STM32F10X_Lib/utils/macosx/upload-reset"
+	DFU_UTIL="./STM32F10X_Lib/utils/macosx/dfu-util"
+	ST_FLASH="./STM32F10X_Lib/utils/macosx/st-flash"
+	STM32FLASH="./STM32F10X_Lib/utils/macosx/stm32flash"
+fi
+
+# Stop MMDVMHost process to free serial port
+sudo killall MMDVMHost >/dev/null 2>&1
+
+# Upload the firmware
+eval sudo $STM32FLASH -v -w mmdvm_hs_dual_hat_fw-12mhz.bin -g 0x0 -R -i 20,-21,21:-20,21 /dev/ttyAMA0
+