Add support for LoneStar USB Stick

2025-12-06 07:12:08 +01:00 · 2021-11-22 18:22:56 -05:00 · 2021-11-22 18:22:56 -05:00 · 4d51976f6a
parent d4cb546a7c
commit 4d51976f6a
10 changed files with 244 additions and 16 deletions
--- a/Config.h
+++ b/Config.h
@ -36,6 +36,8 @@
 // #define D2RG_MMDVM_HS
 // 8) BridgeCom SkyBridge HotSpot
 // #define SKYBRIDGE_HS
+// 9) LoneStar USB Stick ADF7071
+// #define LONESTAR_USB

 // Enable ADF7021 support:
 #define ENABLE_ADF7021
--- a/IO.cpp
+++ b/IO.cpp
@ -318,7 +318,7 @@ bool CIO::hasRXOverflow()
  return m_rxBuffer.hasOverflowed();
 }

-#if defined(ZUMSPOT_ADF7021) || defined(SKYBRIDGE_HS)
+#if defined(ZUMSPOT_ADF7021) || defined(LONESTAR_USB) || defined(SKYBRIDGE_HS)
 void CIO::checkBand(uint32_t frequency_rx, uint32_t frequency_tx) {
  if (!(io.hasSingleADF7021())) {
    // There are two ADF7021s on the board
@ -391,7 +391,7 @@ uint8_t CIO::setFreq(uint32_t frequency_rx, uint32_t frequency_tx, uint8_t rf_po
 #endif

 // Check if we have a single, dualband or duplex board
-#if defined(ZUMSPOT_ADF7021) || defined(SKYBRIDGE_HS)
+#if defined(ZUMSPOT_ADF7021) || defined(LONESTAR_USB) || defined(SKYBRIDGE_HS)
  if (checkZUMspot(frequency_rx, frequency_tx) > 0) {
    return 4U;
  }
--- a/IO.h
+++ b/IO.h
@ -125,7 +125,7 @@ public:
  uint32_t  getWatchdog(void);
  void      getIntCounter(uint16_t &int1, uint16_t &int2);
  void      selfTest(void);
-#if defined(ZUMSPOT_ADF7021) || defined(SKYBRIDGE_HS)
+#if defined(ZUMSPOT_ADF7021) || defined(LONESTAR_USB) || defined(SKYBRIDGE_HS)
  void      checkBand(uint32_t frequency_rx, uint32_t frequency_tx);
  uint8_t   checkZUMspot(uint32_t frequency_rx, uint32_t frequency_tx);
  void      setBandVHF(bool vhf_on);
--- a/IOArduino.cpp
+++ b/IOArduino.cpp
@ -28,7 +28,7 @@

 // STM32F1 pin definitions, using STM32duino

-#if defined(ZUMSPOT_ADF7021) || defined(SKYBRIDGE_HS)
+#if defined(ZUMSPOT_ADF7021) || defined(LONESTAR_USB) || defined(SKYBRIDGE_HS)

 #define PIN_SCLK       PB5
 #define PIN_SREAD      PB6
@ -81,7 +81,7 @@
 #define PIN_COS_LED    PB15

 #else
-#error "Either ZUMSPOT_ADF7021, LIBRE_KIT_ADF7021, MMDVM_HS_HAT_REV12, MMDVM_HS_DUAL_HAT_REV10, NANO_HOTSPOT, NANO_DV_REV10 or SKYBRIDGE_HS need to be defined"
+#error "Either ZUMSPOT_ADF7021, LONESTAR_USB, LIBRE_KIT_ADF7021, MMDVM_HS_HAT_REV12, MMDVM_HS_DUAL_HAT_REV10, NANO_HOTSPOT, NANO_DV_REV10 or SKYBRIDGE_HS need to be defined"
 #endif

 #elif defined(__MK20DX256__) || defined(__MK64FX512__) || defined(__MK66FX1M0__)
@ -156,7 +156,7 @@ void CIO::Init()
 {
 #if defined (__STM32F1__)

-#if defined(ZUMSPOT_ADF7021) || defined(LIBRE_KIT_ADF7021) || defined(MMDVM_HS_HAT_REV12) || defined(MMDVM_HS_DUAL_HAT_REV10) || defined(NANO_HOTSPOT) || defined(NANO_DV_REV10) || defined(SKYBRIDGE_HS)
+#if defined(ZUMSPOT_ADF7021) || defined(LONESTAR_USB) || defined(LIBRE_KIT_ADF7021) || defined(MMDVM_HS_HAT_REV12) || defined(MMDVM_HS_DUAL_HAT_REV10) || defined(NANO_HOTSPOT) || defined(NANO_DV_REV10) || defined(SKYBRIDGE_HS)
  afio_cfg_debug_ports(AFIO_DEBUG_SW_ONLY);
 #endif

--- a/IOSTM.cpp
+++ b/IOSTM.cpp
@ -97,7 +97,7 @@
 #define PIN_COS_LED          GPIO_Pin_13
 #define PORT_COS_LED         GPIOB

-#elif defined(ZUMSPOT_ADF7021) || defined(SKYBRIDGE_HS)
+#elif defined(ZUMSPOT_ADF7021) || defined(SKYBRIDGE_HS) || defined(LONESTAR_USB)

 #define PIN_SCLK             GPIO_Pin_5
 #define PORT_SCLK            GPIOB
@ -275,7 +275,7 @@
 #define PORT_COS_LED         GPIOB

 #else
-#error "Either PI_HAT_7021_REV_02, ZUMSPOT_ADF7021, LIBRE_KIT_ADF7021, MMDVM_HS_HAT_REV12, MMDVM_HS_DUAL_HAT_REV10, NANO_HOTSPOT, NANO_DV_REV11, D2RG_MMDVM_HS or SKYBRIDGE_HS need to be defined"
+#error "Either PI_HAT_7021_REV_02, ZUMSPOT_ADF7021, LONESTAR_USB, LIBRE_KIT_ADF7021, MMDVM_HS_HAT_REV12, MMDVM_HS_DUAL_HAT_REV10, NANO_HOTSPOT, NANO_DV_REV11, D2RG_MMDVM_HS or SKYBRIDGE_HS need to be defined"
 #endif

 extern "C" {
@ -297,7 +297,7 @@ extern "C" {
  }
 #endif

-#elif defined(ZUMSPOT_ADF7021) || defined(LIBRE_KIT_ADF7021) || defined(MMDVM_HS_HAT_REV12) || defined(MMDVM_HS_DUAL_HAT_REV10) || defined(NANO_HOTSPOT) || defined(NANO_DV_REV11) || defined(D2RG_MMDVM_HS) || defined(SKYBRIDGE_HS)
+#elif defined(ZUMSPOT_ADF7021) || defined(LONESTAR_USB) || defined(LIBRE_KIT_ADF7021) || defined(MMDVM_HS_HAT_REV12) || defined(MMDVM_HS_DUAL_HAT_REV10) || defined(NANO_HOTSPOT) || defined(NANO_DV_REV11) || defined(D2RG_MMDVM_HS) || defined(SKYBRIDGE_HS)

 #if defined(BIDIR_DATA_PIN)
  void EXTI3_IRQHandler(void) {
@ -348,11 +348,11 @@ void CIO::Init()

 #if defined(PI_HAT_7021_REV_02)
  GPIO_PinRemapConfig(GPIO_Remap_SWJ_Disable, ENABLE);
-#elif defined(ZUMSPOT_ADF7021) || defined(LIBRE_KIT_ADF7021) || defined(MMDVM_HS_HAT_REV12) || defined(MMDVM_HS_DUAL_HAT_REV10) || defined(NANO_HOTSPOT) || defined(NANO_DV_REV11) || defined(D2RG_MMDVM_HS) || defined(SKYBRIDGE_HS)
+#elif defined(ZUMSPOT_ADF7021) || defined(LONESTAR_USB) || defined(LIBRE_KIT_ADF7021) || defined(MMDVM_HS_HAT_REV12) || defined(MMDVM_HS_DUAL_HAT_REV10) || defined(NANO_HOTSPOT) || defined(NANO_DV_REV11) || defined(D2RG_MMDVM_HS) || defined(SKYBRIDGE_HS)
  GPIO_PinRemapConfig(GPIO_Remap_SWJ_JTAGDisable, ENABLE);
 #endif

-#if defined(ZUMSPOT_ADF7021) || defined(SKYBRIDGE_HS)
+#if defined(ZUMSPOT_ADF7021) || defined(LONESTAR_USB) || defined(SKYBRIDGE_HS)
  // Pin defines if the board has a single ADF7021 or double
  GPIO_InitStruct.GPIO_Speed = GPIO_Speed_50MHz;
  GPIO_InitStruct.GPIO_Pin   = PIN_SGL_DBL;
@ -549,7 +549,7 @@ void CIO::Init()
  EXTI_InitStructure.EXTI_Line = EXTI_Line14;
 #endif

-#elif defined(ZUMSPOT_ADF7021) || defined(LIBRE_KIT_ADF7021) || defined(MMDVM_HS_HAT_REV12) || defined(MMDVM_HS_DUAL_HAT_REV10) || defined(NANO_HOTSPOT) || defined(NANO_DV_REV11) || defined(D2RG_MMDVM_HS) || defined(SKYBRIDGE_HS)
+#elif defined(ZUMSPOT_ADF7021) || defined(LONESTAR_USB) || defined(LIBRE_KIT_ADF7021) || defined(MMDVM_HS_HAT_REV12) || defined(MMDVM_HS_DUAL_HAT_REV10) || defined(NANO_HOTSPOT) || defined(NANO_DV_REV11) || defined(D2RG_MMDVM_HS) || defined(SKYBRIDGE_HS)

 #if defined(BIDIR_DATA_PIN)
  // Connect EXTI3 Line
@ -567,7 +567,7 @@ void CIO::Init()
  // Connect EXTI5 Line
  GPIO_EXTILineConfig(PORT_TXD2_INT, PIN_TXD2_INT);
  // Configure EXT5 line
-  #if defined(ZUMSPOT_ADF7021) || defined(SKYBRIDGE_HS)
+  #if defined(ZUMSPOT_ADF7021) || defined(LONESTAR_USB) || defined(SKYBRIDGE_HS)
  EXTI_InitStructure2.EXTI_Line = EXTI_Line8;
  #else
  EXTI_InitStructure2.EXTI_Line = EXTI_Line5;
@ -601,7 +601,7 @@ void CIO::startInt()

  NVIC_InitStructure.NVIC_IRQChannel = EXTI15_10_IRQn;

-#elif defined(ZUMSPOT_ADF7021) || defined(LIBRE_KIT_ADF7021) || defined(MMDVM_HS_HAT_REV12) || defined(MMDVM_HS_DUAL_HAT_REV10) || defined(NANO_HOTSPOT) || defined(NANO_DV_REV11) || defined(D2RG_MMDVM_HS) || defined(SKYBRIDGE_HS)
+#elif defined(ZUMSPOT_ADF7021) || defined(LONESTAR_USB) || defined(LIBRE_KIT_ADF7021) || defined(MMDVM_HS_HAT_REV12) || defined(MMDVM_HS_DUAL_HAT_REV10) || defined(NANO_HOTSPOT) || defined(NANO_DV_REV11) || defined(D2RG_MMDVM_HS) || defined(SKYBRIDGE_HS)

 #if defined(BIDIR_DATA_PIN)
  // Enable and set EXTI3 Interrupt
@ -781,7 +781,7 @@ void CIO::COS_pin(bool on)
  GPIO_WriteBit(PORT_COS_LED, PIN_COS_LED, on ? Bit_SET : Bit_RESET);
 }

-#if defined(ZUMSPOT_ADF7021) || defined(SKYBRIDGE_HS)
+#if defined(ZUMSPOT_ADF7021) || defined(LONESTAR_USB) || defined(SKYBRIDGE_HS)
 void CIO::setBandVHF(bool vhf_on) {
  GPIO_WriteBit(PORT_SET_BAND, PIN_SET_BAND, vhf_on ? Bit_SET : Bit_RESET);
 }
--- a/SerialPort.cpp
+++ b/SerialPort.cpp
@ -333,7 +333,7 @@ uint8_t CSerialPort::setConfig(const uint8_t* data, uint8_t length)
    DEBUG1("Full duplex not supported with this firmware");
    return 6U;
  }
-#elif defined(DUPLEX) && (defined(ZUMSPOT_ADF7021) || defined(SKYBRIDGE_HS))
+#elif defined(DUPLEX) && (defined(ZUMSPOT_ADF7021) || defined(LONESTAR_USB) || defined(SKYBRIDGE_HS))
  if (io.isDualBand() && m_duplex && m_calState == STATE_IDLE && modemState != STATE_DSTARCAL) {
    DEBUG1("Full duplex is not supported on this board");
    return 6U;
--- a/configs/LoneStar_USB.h
+++ b/configs/LoneStar_USB.h
@ -0,0 +1,120 @@
+/*
+ *   Copyright (C) 2017,2018,2019,2020 by Andy Uribe CA6JAU
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if !defined(CONFIG_H)
+#define  CONFIG_H
+
+// Select one board (STM32F103 based boards)
+// 1) ZUMspot RPi or ZUMspot USB:
+// #define ZUMSPOT_ADF7021
+// 2) Libre Kit board or any homebrew hotspot with modified RF7021SE and Blue Pill STM32F103:
+// #define LIBRE_KIT_ADF7021
+// 3) MMDVM_HS_Hat revisions 1.1, 1.2 and 1.4 (DB9MAT & DF2ET)
+// #define MMDVM_HS_HAT_REV12
+// 4) MMDVM_HS_Dual_Hat revisions 1.0 (DB9MAT & DF2ET & DO7EN)
+// #define MMDVM_HS_DUAL_HAT_REV10
+// 5) Nano hotSPOT (BI7JTA)
+// #define NANO_HOTSPOT
+// 6) NanoDV NPi or USB revisions 1.0 (BG4TGO & BG5HHP)
+// #define NANO_DV_REV10
+// 7) D2RG MMDVM_HS RPi (BG3MDO, VE2GZI, CA6JAU)
+// #define D2RG_MMDVM_HS
+// 8) BridgeCom SkyBridge HotSpot
+// #define SKYBRIDGE_HS
+// 9) LoneStar USB Stick ADF7071
+#define LONESTAR_USB
+
+// Enable ADF7021 support:
+#define ENABLE_ADF7021
+
+// Enable full duplex support with dual ADF7021 (valid for homebrew hotspots only):
+// #define DUPLEX
+
+// TCXO of the ADF7021
+// For 14.7456 MHz:
+#define ADF7021_14_7456
+// For 12.2880 MHz:
+// #define ADF7021_12_2880
+
+// Configure receiver gain for ADF7021
+// AGC automatic, default settings:
+#define AD7021_GAIN_AUTO
+// AGC automatic with high LNA linearity:
+// #define AD7021_GAIN_AUTO_LIN
+// AGC OFF, lowest gain: 
+// #define AD7021_GAIN_LOW
+// AGC OFF, highest gain:
+// #define AD7021_GAIN_HIGH
+
+// Host communication selection:
+// #define STM32_USART1_HOST
+#define STM32_USB_HOST
+// #define STM32_I2C_HOST
+
+// I2C host address:
+#define I2C_ADDR 0x22
+
+// Enable mode detection:
+#define ENABLE_SCAN_MODE
+
+// Send RSSI value:
+#define SEND_RSSI_DATA
+
+// Enable Nextion LCD serial port repeater on USART2 (ZUMspot Libre Kit and ZUMspot RPi):
+// #define SERIAL_REPEATER
+
+// Enable Nextion LCD serial port repeater on USART1 (Do not use with STM32_USART1_HOST enabled):
+// #define SERIAL_REPEATER_USART1
+
+// Enable P25 Wide modulation:
+// #define ENABLE_P25_WIDE
+
+// Disable mode LEDs blink during scan mode:
+// #define QUIET_MODE_LEDS
+
+// Engage a constant or descreet Service LED mode once repeater is running 
+// #define CONSTANT_SRV_LED
+// #define CONSTANT_SRV_LED_INVERTED
+// #define DISCREET_SRV_LED
+// #define DISCREET_SRV_LED_INVERTED
+
+// Use the YSF and P25 LEDs for NXDN
+// #define USE_ALTERNATE_NXDN_LEDS
+
+// Use the D-Star and P25 LEDs for M17
+// #define USE_ALTERNATE_M17_LEDS
+
+// Use the D-Star and DMR LEDs for POCSAG
+// #define USE_ALTERNATE_POCSAG_LEDS
+
+// Enable for RPi 3B+, USB mode
+#define LONG_USB_RESET
+
+// Enable modem debug messages
+#define ENABLE_DEBUG
+
+// Disable frequency bands check
+// #define DISABLE_FREQ_CHECK
+
+// Disable frequency restrictions (satellite, ISS, etc)
+// #define DISABLE_FREQ_BAN
+
+// Enable UDID feature
+// #define ENABLE_UDID
+
+#endif
--- a/scripts/build_fw.sh
+++ b/scripts/build_fw.sh
@ -176,4 +176,13 @@ make -j4
 mv ~/MMDVM_HS/bin/mmdvm_f1.bin ~/MMDVM_HS/bin/skybridge_rpi_fw.bin
 make clean

+# Building LoneStar USB
+echo "*************************************************"
+echo "********* Building LoneStar USB firmware *********"
+echo "*************************************************"
+cp ~/MMDVM_HS/configs/LoneStar_USB.h ~/MMDVM_HS/Config.h
+make -j4 bl
+mv ~/MMDVM_HS/bin/mmdvm_f1bl.bin ~/MMDVM_HS/bin/lonestar_usb_fw.bin
+make clean
+
 cp ~/MMDVM_HS/configs/ZUMspot_Libre.h ~/MMDVM_HS/Config.h
--- a/scripts/install_fw_lonestar_usb.sh
+++ b/scripts/install_fw_lonestar_usb.sh
@ -0,0 +1,95 @@
+#!/bin/bash
+
+#   Copyright (C) 2017,2018 by Andy Uribe CA6JAU
+
+#   This program is free software; you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation; either version 2 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program; if not, write to the Free Software
+#   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+# Configure latest version
+FW_VERSION="v1.6.0"
+
+# Change USB-serial port name ONLY in macOS
+MAC_DEV_USB_SER="/dev/cu.usbmodem14401"
+
+# Configure beta version
+FW_VERSION_BETA="v1.6.0b"
+
+# Firmware filename
+FW_FILENAME="lonestar_usb_fw.bin"
+	
+# Download latest firmware
+if [ $1 = "beta" ]; then
+	echo "Downloading beta firmware..."
+	curl -OL https://github.com/juribeparada/MMDVM_HS/releases/download/$FW_VERSION_BETA/$FW_FILENAME
+else
+	echo "Downloading latest firmware (stable)..."
+	curl -OL https://github.com/juribeparada/MMDVM_HS/releases/download/$FW_VERSION/$FW_FILENAME
+fi
+
+# Download STM32F10X_Lib (only for binary tools)
+if [ ! -d "./STM32F10X_Lib/utils" ]; then
+  git clone https://github.com/juribeparada/STM32F10X_Lib
+fi
+
+# Configure vars depending on OS
+if [ $(uname -s) == "Linux" ]; then
+	DEV_USB_SER="/dev/ttyACM0"
+	if [ $(uname -m) == "x86_64" ]; then
+		echo "Linux 64-bit detected"
+		DFU_RST="./STM32F10X_Lib/utils/linux64/upload-reset"
+		DFU_UTIL="./STM32F10X_Lib/utils/linux64/dfu-util"
+		ST_FLASH="./STM32F10X_Lib/utils/linux64/st-flash"
+		STM32FLASH="./STM32F10X_Lib/utils/linux64/stm32flash"
+	elif [ $(uname -m) == "armv7l" ]; then
+		echo "Raspberry Pi 3 detected"
+		DFU_RST="./STM32F10X_Lib/utils/rpi32/upload-reset"
+		DFU_UTIL="./STM32F10X_Lib/utils/rpi32/dfu-util"
+		ST_FLASH="./STM32F10X_Lib/utils/rpi32/st-flash"
+		STM32FLASH="./STM32F10X_Lib/utils/rpi32/stm32flash"
+	elif [ $(uname -m) == "armv6l" ]; then
+		echo "Raspberry Pi 2 or Pi Zero W detected"
+		DFU_RST="./STM32F10X_Lib/utils/rpi32/upload-reset"
+		DFU_UTIL="./STM32F10X_Lib/utils/rpi32/dfu-util"
+		ST_FLASH="./STM32F10X_Lib/utils/rpi32/st-flash"
+		STM32FLASH="./STM32F10X_Lib/utils/rpi32/stm32flash"
+	else
+		echo "Linux 32-bit detected"
+		DFU_RST="./STM32F10X_Lib/utils/linux/upload-reset"
+		DFU_UTIL="./STM32F10X_Lib/utils/linux/dfu-util"
+		ST_FLASH="./STM32F10X_Lib/utils/linux/st-flash"
+		STM32FLASH="./STM32F10X_Lib/utils/linux/stm32flash"
+	fi
+fi
+
+if [ $(uname -s) == "Darwin" ]; then
+	echo "macOS detected"
+	DEV_USB_SER=$MAC_DEV_USB_SER
+	DFU_RST="./STM32F10X_Lib/utils/macosx/upload-reset"
+	DFU_UTIL="./STM32F10X_Lib/utils/macosx/dfu-util"
+	ST_FLASH="./STM32F10X_Lib/utils/macosx/st-flash"
+	STM32FLASH="./STM32F10X_Lib/utils/macosx/stm32flash"
+fi
+
+# Stop MMDVMHost process to free serial port
+sudo killall MMDVMHost >/dev/null 2>&1
+
+# Reset ZUMspot to enter bootloader mode
+eval sudo $DFU_RST $DEV_USB_SER 750
+
+# Upload the firmware
+eval sudo $DFU_UTIL -D $FW_FILENAME -d 1eaf:0003 -a 2 -R -R
+
+echo
+echo "Please RESET your LoneStar device !"
+echo
--- a/version.h
+++ b/version.h
@ -42,6 +42,8 @@
 #define BOARD_INFO      "D2RG_MMDVM_HS"
 #elif defined(SKYBRIDGE_HS)
 #define BOARD_INFO      "SkyBridge"
+#elif defined(LONESTAR_USB)
+#define BOARD_INFO      "LS_USB_STICK"
 #else
 #define BOARD_INFO      "MMDVM_HS"
 #endif