juribeparada/MMDVM_HS
1
0
Fork 0
mirror of https://github.com/juribeparada/MMDVM_HS.git synced 2025-12-06 07:12:08 +01:00
Code Issues Actions Packages Projects Releases Wiki Activity

Update README

Browse source
This commit is contained in:
Andy CA6JAU 2018-02-18 00:10:17 -03:00
parent d8e74634d4
commit 1855f4a3b1
1 changed files with 2 additions and 2 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

4
README.md
View file

@ -23,7 +23,7 @@ This software is licenced under the GPL v2 and is intended for amateur and educa
The ADF7021 (or RF7021SE module) must operate with a 14.7456 MHz TCXO and with at least 2 ppm of frequency stability. You could use also 12.2880 MHz TCXO, but this frequency configuration has less testing. Any other TCXO frequency is not supported.
Please set TXLevel=50 in MMDVM.ini to configure default deviation levels for all modes. You could change this value and other TXLevel paramenters to change deviation levels. Use [MMDVMCal](https://github.com/g4klx/MMDVMCal) to check DMR deviation level and TX frequency offset with calibrated test equipment.
Please set TXLevel=50 in MMDVM.ini to configure default deviation levels for all modes. You could modify this value and other TXLevel paramenters to change deviation levels. Use [MMDVMCal](https://github.com/g4klx/MMDVMCal) to check DMR deviation level and TX frequency offset with calibrated test equipment.
The jumper wire to CLKOUT in RF7021SE module is not longer required for lastest MMDVM_HS firmware. But CE pin connection of ADF7021 is required for proper operation of ZUMspot.
@ -33,7 +33,7 @@ VHF (144-148 MHz) support for ZUMSpot is added by an external 18 nH inductor bet
Dual ADF7021 for full duplex operation (#define DUPLEX in Config.h) will work only with a big RX/TX frequency separation (5 MHz or more in UHF band for example) and proper antenna filtering. At the moment #define LIBRE_KIT_ADF7021 (Config.h) with STM32F103 platform is supported. Please see [BUILD.md](BUILD.md) for pinout details.
If you can't decode any 4FSK modulation (DMR, YSF, P25 or NXDN) with your ZUMspot, the common solution is to adjust RX frequency offset (RXOffset) in your MMDVM.ini file. Please try with steps of +-100 Hz until you get low BER. If you don't have test equipment, the only procedure is trial and error. In some cases TXOffset adjustment is also required for proper radio decoding. If you have test equipment, enable TEST_TX feature (see "Hidden functions" in [BUILD.md](BUILD.md) document).
If you can't decode any 4FSK modulation (DMR, YSF, P25 or NXDN) with your ZUMspot, the common solution is to adjust RX frequency offset (RXOffset) in your MMDVM.ini file. Please try with steps of +-100 Hz until you get low BER. If you don't have test equipment, the procedure is trial and error. In some cases TXOffset adjustment is also required for proper radio decoding. If you have test equipment, please use [MMDVMCal](https://github.com/g4klx/MMDVMCal).
# Quick start