From 93f57930d0e46108aaded164dba7e77602d7373e Mon Sep 17 00:00:00 2001 From: Bryan Paradis Date: Tue, 25 Feb 2025 18:35:32 -0800 Subject: [PATCH] LibreVNA manual - serialnumber to serial number --- Documentation/UserManual/manual.tex | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/UserManual/manual.tex b/Documentation/UserManual/manual.tex index c0b897d..34a448e 100644 --- a/Documentation/UserManual/manual.tex +++ b/Documentation/UserManual/manual.tex @@ -762,7 +762,7 @@ Steps required to perform the electronic calibration: \item Start the electronic calibration dialog \item Select the correct LibreCAL device and the coefficients: \begin{itemize} -\item \textbf{Device:} Serialnumber of the LibreCAL. Usually, only one should be connected and the serialnumber will be automatically selected when the dialog is first opened +\item \textbf{Device:} The serial number of the LibreCAL. Usually, only one should be connected and the serial number will be automatically selected when the dialog is first opened \item \textbf{Coefficients:} Select the coefficient set to be used. The LibreCAL can store multiple sets of coefficients. Refer to the LibreCAL manual\footnote{\url{https://github.com/jankae/LibreCAL/blob/main/Documentation/manual.pdf}} for detailed information on coefficient sets. \end{itemize} \item Check and adjust the port assignments. Ports between the \vna{} and LibreCAL can be connected in any order. Match the ports in the dialog to your physical setup.