SCPI commands for saving/loading calibration files

Software/PC_Application/Calibration/amplitudecaldialog.cpp

@@ -82,7 +82,7 @@ AmplitudeCalDialog::AmplitudeCalDialog(Device *dev, QWidget *parent) :
         file >> j;
         for(auto point : j) {
             if(!point.contains("Frequency") || !point.contains("Port1") || !point.contains("Port2")) {
-                QMessageBox::warning(this, "Error loading file", "Failed to parse calibration point");
+                InformationBox::ShowError("Error loading file", "Failed to parse calibration point");
                 return;
             }
             CorrectionPoint p;
@@ -425,9 +425,7 @@ void AmplitudeCalDialog::ReceivedMeasurement(Protocol::SpectrumAnalyzerResult re
 bool AmplitudeCalDialog::ConfirmActionIfEdited()
 {
     if(edited) {
-        auto reply = QMessageBox::question(this, "Confirm action", "Some points have been edited but not saved in the device yet. If you continue, all changes will be lost (unless they are already saved to a file). Do you want to continue?",
-                                        QMessageBox::Yes|QMessageBox::No);
-        return reply == QMessageBox::Yes;
+        return InformationBox::AskQuestion("Confirm action", "Some points have been edited but not saved in the device yet. If you continue, all changes will be lost (unless they are already saved to a file). Do you want to continue?", true);
     } else {
         // not edited yet, nothing to confirm
         return true;

Software/PC_Application/Calibration/calibration.cpp

@@ -6,6 +6,7 @@
 #include "unit.h"
 #include <QDebug>
 #include "Tools/parameters.h"
+#include "CustomWidgets/informationbox.h"
 
 using namespace std;
 
@@ -127,7 +128,7 @@ bool Calibration::constructErrorTerms(Calibration::Type type)
                 + "The measured calibration data covers " + Unit::ToString(minFreq, "Hz", " kMG", 4) + " to " + Unit::ToString(maxFreq, "Hz", " kMG", 4)
                 + ", however the calibration kit is only valid from " + Unit::ToString(kit_minFreq, "Hz", " kMG", 4) + " to " + Unit::ToString(kit_maxFreq, "Hz", " kMG", 4) + ".\n\n"
                 + "Please adjust the calibration kit or the span and take the calibration measurements again.";
-        QMessageBox::critical(nullptr, "Unable to perform calibration", msg);
+        InformationBox::ShowError("Unable to perform calibration", msg);
         qWarning() << msg;
         return false;
     }
@@ -732,6 +733,13 @@ bool Calibration::openFromFile(QString filename)
             return false;
         }
     }
+
+    // force correct file ending
+    if(filename.toLower().endsWith(".cal")) {
+        filename.chop(4);
+        filename += ".cal";
+    }
+
     qDebug() << "Attempting to open calibration from file" << filename;
 
     // reset all data before loading new calibration
@@ -749,16 +757,24 @@ bool Calibration::openFromFile(QString filename)
     try {
         kit = Calkit::fromFile(calkit_file);
     } catch (runtime_error e) {
-        QMessageBox::warning(nullptr, "Missing calibration kit", "The calibration kit file associated with the selected calibration could not be parsed. The calibration might not be accurate. (" + QString(e.what()) + ")");
+        InformationBox::ShowError("Missing calibration kit", "The calibration kit file associated with the selected calibration could not be parsed. The calibration might not be accurate. (" + QString(e.what()) + ")");
         qWarning() << "Parsing of calibration kit failed while opening calibration file: " << e.what();
     }
 
     ifstream file;
+
     file.open(filename.toStdString());
+    if(!file.good()) {
+        QString msg = "Unable to open file: "+filename;
+        InformationBox::ShowError("Error", msg);
+        qWarning() << msg;
+        return false;
+    }
+
     try {
         file >> *this;
-    } catch(runtime_error e) {
-        QMessageBox::warning(nullptr, "File parsing error", e.what());
+    } catch(exception e) {
+        InformationBox::ShowError("File parsing error", e.what());
         qWarning() << "Calibration file parsing failed: " << e.what();
         return false;
     }
@@ -778,7 +794,7 @@ bool Calibration::saveToFile(QString filename)
         }
     }
 
-    if(filename.endsWith(".cal")) {
+    if(filename.toLower().endsWith(".cal")) {
         filename.chop(4);
     }
     auto calibration_file = filename + ".cal";

Software/PC_Application/Calibration/calkit.cpp

@@ -7,6 +7,7 @@
 #include "json.hpp"
 #include <QMessageBox>
 #include <QDebug>
+#include "CustomWidgets/informationbox.h"
 
 using json = nlohmann::json;
 using namespace std;
@@ -171,13 +172,9 @@ Calkit Calkit::fromFile(QString filename)
         c.TRL.Line.minFreq = readLine(file).toDouble();
         c.TRL.Line.maxFreq = readLine(file).toDouble();
 
-        auto msg = new QMessageBox();
-        msg->setWindowTitle("Loading calkit file");
-        msg->setText("The file \"" + filename + "\" is stored in a deprecated"
+        InformationBox::ShowMessage("Loading calkit file", "The file \"" + filename + "\" is stored in a deprecated"
                      " calibration kit format. Future versions of this application might not support"
                      " it anymore. Please save the calibration kit to update to the new format");
-        msg->setStandardButtons(QMessageBox::Ok);
-        msg->show();
     }
     file.close();
 

Software/PC_Application/Calibration/calkitdialog.cpp

@@ -7,7 +7,7 @@
 #include <fstream>
 #include <touchstone.h>
 #include <QtGlobal>
-#include <QMessageBox>
+#include "CustomWidgets/informationbox.h"
 
 using namespace std;
 
@@ -123,7 +123,7 @@ CalkitDialog::CalkitDialog(Calkit &c, QWidget *parent) :
             try {
                 ownKit = Calkit::fromFile(filename);
             } catch (runtime_error e) {
-                QMessageBox::warning(nullptr, "Error", "The calibration kit file could not be parsed (" + QString(e.what()) + ")");
+                InformationBox::ShowError("Error", "The calibration kit file could not be parsed (" + QString(e.what()) + ")");
                 qWarning() << "Parsing of calibration kit failed while opening calibration file: " << e.what();
             }
             updateEntries();

Software/PC_Application/CustomWidgets/informationbox.cpp

@@ -3,8 +3,15 @@
 #include <QSettings>
 #include <QDebug>
 
+bool InformationBox::has_gui = true;
+
 void InformationBox::ShowMessage(QString title, QString message, QString messageID, bool block)
 {
+    if(!has_gui) {
+        // no gui option active, do not show any messages
+        return;
+    }
+
     // check if the user still wants to see this message
     unsigned int hash;
     if(messageID.isEmpty()) {
@@ -31,12 +38,21 @@ void InformationBox::ShowMessageBlocking(QString title, QString message, QString
 
 void InformationBox::ShowError(QString title, QString message)
 {
+    if(!has_gui) {
+        // no gui option active, do not show any messages
+        return;
+    }
     auto box = new InformationBox(title, message, QMessageBox::Information, 0, nullptr);
     box->show();
 }
 
 bool InformationBox::AskQuestion(QString title, QString question, bool defaultAnswer, QString messageID)
 {
+    if(!has_gui) {
+        // no gui option active, do not show any messages
+        return defaultAnswer;
+    }
+
     // check if the user still wants to see this message
     unsigned int hash;
     if(messageID.isEmpty()) {
@@ -61,6 +77,11 @@ bool InformationBox::AskQuestion(QString title, QString question, bool defaultAn
     }
 }
 
+void InformationBox::setGUI(bool enable)
+{
+    has_gui = enable;
+}
+
 InformationBox::InformationBox(QString title, QString message, Icon icon, unsigned int hash, QWidget *parent)
     : QMessageBox(parent),
       hash(hash)

Software/PC_Application/CustomWidgets/informationbox.h

@@ -12,11 +12,14 @@ public:
     static void ShowError(QString title, QString message);
     // Display a dialog with yes/no buttons. Returns true if yes is clicked, false otherwise. If the user has selected to never see this message again, defaultAnswer is returned instead
     static bool AskQuestion(QString title, QString question, bool defaultAnswer, QString messageID = QString());
+
+    static void setGUI(bool enable);
 private:
     InformationBox(QString title, QString message, QMessageBox::Icon icon, unsigned int hash, QWidget *parent);
     ~InformationBox();
     static QString hashToSettingsKey(unsigned int hash);
     unsigned int hash;
+    static bool has_gui;
 };
 
 #endif // INFORMATIONBOX_H

Software/PC_Application/Device/device.cpp

@@ -5,6 +5,7 @@
 #include <QString>
 #include <QMessageBox>
 #include <mutex>
+#include "CustomWidgets/informationbox.h"
 
 using namespace std;
 
@@ -169,8 +170,7 @@ Device::Device(QString serial)
 
     if(!m_handle) {
         QString message =  "No device found";
-        auto msg = new QMessageBox(QMessageBox::Icon::Warning, "Error opening device", message);
-        msg->show();
+        InformationBox::ShowError("Error opening device", message);
         libusb_exit(m_context);
         throw std::runtime_error(message.toStdString());
         return;
@@ -186,8 +186,7 @@ Device::Device(QString serial)
         message.append(libusb_strerror((libusb_error) ret));
         message.append("\" Maybe you are already connected to this device?");
         qWarning() << message;
-        auto msg = new QMessageBox(QMessageBox::Icon::Warning, "Error opening device", message);
-        msg->show();
+        InformationBox::ShowError("Error opening device", message);
         libusb_exit(m_context);
         throw std::runtime_error(message.toStdString());
     }
@@ -359,8 +358,7 @@ void Device::SearchDevices(std::function<bool (libusb_device_handle *, QString)>
                                "this device (is another instance of the application already runnning? "
                                "If that is not the case, you can try installing the WinUSB driver using Zadig (https://zadig.akeo.ie/)");
                 qWarning() << message;
-                auto msg = new QMessageBox(QMessageBox::Icon::Warning, "Error opening device", message);
-                msg->show();
+                InformationBox::ShowError("Error opening device", message);
             }
             continue;
         }

Software/PC_Application/Traces/Math/medianfilter.cpp

@@ -2,7 +2,7 @@
 #include "ui_medianfilterdialog.h"
 #include "ui_medianexplanationwidget.h"
 
-#include <QMessageBox>
+#include "CustomWidgets/informationbox.h"
 
 using namespace Math;
 using namespace std;
@@ -34,7 +34,7 @@ void MedianFilter::edit()
 
     connect(ui->kernelSize, qOverload<int>(&QSpinBox::valueChanged), [=](int newval) {
         if((newval & 0x01) == 0) {
-            QMessageBox::information(d, "Median filter", "Only odd values are allowed for the kernel size");
+            InformationBox::ShowMessageBlocking("Median filter", "Only odd values are allowed for the kernel size");
             newval++;
         }
         ui->kernelSize->setValue(newval);

Software/PC_Application/VNA/Deembedding/portextension.h

@@ -41,12 +41,10 @@ private:
 
     // status variables for automatic measurements
     Calkit *kit;
-//    bool measuring;
     bool isPort1;
     bool isOpen;
     bool isIdeal;
-//    std::vector<Protocol::Datapoint> measurements;
-    QMessageBox *msgBox;
+
     Ui::PortExtensionEditDialog *ui;
 };
 

Software/PC_Application/VNA/Deembedding/twothru.h

@@ -41,7 +41,6 @@ private:
     std::vector<Point> points;
     bool measuring2xthru;
     bool measuringDUT;
-    QMessageBox *msgBox;
     Ui::TwoThruDialog *ui;
 };
 

Software/PC_Application/VNA/vna.cpp

@@ -1062,7 +1062,7 @@ void VNA::ApplyCalibration(Calibration::Type type)
                 DisableCalibration(true);
             }
         } catch (runtime_error e) {
-            QMessageBox::critical(window, "Calibration failure", e.what());
+            InformationBox::ShowError("Calibration failure", e.what());
             DisableCalibration(true);
         }
     } else {
@@ -1325,6 +1325,35 @@ void VNA::SetupSCPI()
     scpi_cal->add(new SCPICommand("BUSy", nullptr, [=](QStringList) -> QString {
         return CalibrationMeasurementActive() ? "TRUE" : "FALSE";
     }));
+    scpi_cal->add(new SCPICommand("SAVE", [=](QStringList params) -> QString {
+        if(params.size() != 1 || !calValid) {
+            // no filename given or no calibration active
+            return "ERROR";
+        }
+        if(!cal.saveToFile(params[0])) {
+            // some error when writing the calibration file
+            return "ERROR";
+        }
+        calEdited = false;
+        return "";
+    }, nullptr));
+    scpi_cal->add(new SCPICommand("LOAD", nullptr, [=](QStringList params) -> QString {
+        if(params.size() != 1) {
+            // no filename given or no calibration active
+            return "FALSE";
+        }
+        if(!cal.openFromFile(params[0])) {
+            // some error when loading the calibration file
+            return "FALSE";
+        }
+        if(cal.getType() == Calibration::Type::None) {
+            DisableCalibration();
+        } else {
+            ApplyCalibration(cal.getType());
+        }
+        calEdited = false;
+        return "TRUE";
+    }));
 }
 
 void VNA::ConstrainAndUpdateFrequencies()

Software/PC_Application/appwindow.cpp

@@ -49,6 +49,7 @@
 #include "Calibration/frequencycaldialog.h"
 #include <QDebug>
 #include "CustomWidgets/jsonpickerdialog.h"
+#include "CustomWidgets/informationbox.h"
 #include <QCommandLineParser>
 #include "Util/app_common.h"
 #include "about.h"
@@ -181,7 +182,7 @@ AppWindow::AppWindow(QWidget *parent)
         try {
             file >> j;
         } catch (exception &e) {
-            QMessageBox::warning(nullptr, "Error", "Failed to parse the setup file (" + QString(e.what()) + ")");
+            InformationBox::ShowError("Error", "Failed to parse the setup file (" + QString(e.what()) + ")");
             qWarning() << "Parsing of setup file failed: " << e.what();
         }
         file.close();
@@ -252,8 +253,11 @@ AppWindow::AppWindow(QWidget *parent)
         ConnectToDevice();
     }
     if(!parser.isSet("no-gui")) {
+        InformationBox::setGUI(true);
         resize(1280, 800);
         show();
+    } else {
+        InformationBox::setGUI(false);
     }
 }
 
@@ -357,7 +361,7 @@ void AppWindow::DisconnectDevice()
 void AppWindow::DeviceConnectionLost()
 {
     DisconnectDevice();
-    QMessageBox::warning(this, "Disconnected", "The USB connection to the device has been lost");
+    InformationBox::ShowError("Disconnected", "The USB connection to the device has been lost");
     UpdateDeviceList();
 }
 
@@ -885,12 +889,11 @@ void AppWindow::StartFirmwareUpdateDialog()
 
 void AppWindow::DeviceNeedsUpdate(int reported, int expected)
 {
-    auto ret = QMessageBox::warning(this, "Warning",
+    auto ret = InformationBox::AskQuestion("Warning",
                                 "The device reports a different protocol"
                                 "version (" + QString::number(reported) + ") than expected (" + QString::number(expected) + ").\n"
-                                "A firmware update is strongly recommended. Do you want to update now?",
-                                   QMessageBox::Yes | QMessageBox::No, QMessageBox::Yes);
-    if (ret == QMessageBox::Yes) {
+                                "A firmware update is strongly recommended. Do you want to update now?", false);
+    if (ret) {
         StartFirmwareUpdateDialog();
     }
 }

Software/PC_Application/preferences.cpp

@@ -99,7 +99,7 @@ PreferencesDialog::PreferencesDialog(Preferences *pref, QWidget *parent) :
 
     // Reset and OK action
     connect(ui->buttonBox->button(QDialogButtonBox::RestoreDefaults), &QPushButton::clicked, [=](){
-        if(QMessageBox::question(this, "Restore defaults?", "Do you really want to set all preferences to their default values?") == QMessageBox::StandardButton::Yes) {
+        if(InformationBox::AskQuestion("Restore defaults?", "Do you really want to set all preferences to their default values?", true)) {
             p->setDefault();
             setInitialGUIState();
         }