From 092400951bbf506c2deecbab6bea37f160ddcbf5 Mon Sep 17 00:00:00 2001 From: Bryan Paradis Date: Tue, 25 Feb 2025 18:39:49 -0800 Subject: [PATCH] LibreVNA manual - und to and --- Documentation/UserManual/manual.tex | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/UserManual/manual.tex b/Documentation/UserManual/manual.tex index ca5f638..4559637 100644 --- a/Documentation/UserManual/manual.tex +++ b/Documentation/UserManual/manual.tex @@ -219,7 +219,7 @@ Due to the high impedance input, the external input may detect a valid signal wh \section{Getting started} \begin{enumerate} -\item Connect the \vna{} to a computer using the USB port. After a couple of seconds, only the "Power" and "Ready" LEDs should stay on. If the "Ready" LED does not turn on or the "Booting" LED indicates an error code, there is a problem und the device will not function properly. See section~\ref{troubleshooting} for possible solutions. +\item Connect the \vna{} to a computer using the USB port. After a couple of seconds, only the "Power" and "Ready" LEDs should stay on. If the "Ready" LED does not turn on or the "Booting" LED indicates an error code, there is a problem and the device will not function properly. See section~\ref{troubleshooting} for possible solutions. \item Start the PC application to connect to the \vna{}. The window should look similar to this: \makebox[\textwidth][c]{ \includegraphics[width=\textwidth]{Screenshots/ApplicationOverview.png}