From ceef581995d9d910affe26ee598d899a76847aac Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Andr=C3=A1s=20Retzler?= Date: Sun, 18 Oct 2015 16:55:41 +0200 Subject: [PATCH] Updated Setting up OpenWebRX on a Raspberry Pi 2 (markdown) --- Setting-up-OpenWebRX-on-a-Raspberry-Pi-2.md | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/Setting-up-OpenWebRX-on-a-Raspberry-Pi-2.md b/Setting-up-OpenWebRX-on-a-Raspberry-Pi-2.md index 728b226..4c60583 100644 --- a/Setting-up-OpenWebRX-on-a-Raspberry-Pi-2.md +++ b/Setting-up-OpenWebRX-on-a-Raspberry-Pi-2.md @@ -11,8 +11,10 @@ You will need a **Raspberry Pi 2**. It is not sure that you will run into any of these, but anyway: * [Audio underruns and `csdr flowcontrol` issue](https://github.com/simonyiszk/openwebrx/issues/9) -* Port 8888 is already in use on your system (edit `config_rtl.py` and `config_webrx.py` and replace this port number with another). -* THe Pi doesn't start with RTL-SDR is plugged in / restarts when plugging in RTL-SDR / fails to recongize RTL-SDR: maybe your power supply cannot provide enough current. You should try a dedicated 5V / 2A power supply [like this](http://www.adafruit.com/product/1995). I wasn't able to use the RPi from a laptop USB port, needed a dedicated PSU. +* Port 8888 is already in use on your system: + * Edit `config_rtl.py` and `config_webrx.py` and replace this port number with another). +* The Pi doesn't start with RTL-SDR is plugged in / restarts when plugging in RTL-SDR / fails to recongize RTL-SDR: + * Maybe your power supply cannot provide enough current. You should try a dedicated 5V / 2A power supply [like this](http://www.adafruit.com/product/1995). I wasn't able to use the RPi from a laptop USB port, needed a dedicated PSU. ## Compromise between performance and the maximum number of clients