diff --git a/Setting-up-OpenWebRX-on-a-Raspberry-Pi-2.md b/Setting-up-OpenWebRX-on-a-Raspberry-Pi-2.md
index 728b226..4c60583 100644
--- a/Setting-up-OpenWebRX-on-a-Raspberry-Pi-2.md
+++ b/Setting-up-OpenWebRX-on-a-Raspberry-Pi-2.md
@@ -11,8 +11,10 @@ You will need a **Raspberry Pi 2**.
 It is not sure that you will run into any of these, but anyway:
 
 * [Audio underruns and `csdr flowcontrol` issue](https://github.com/simonyiszk/openwebrx/issues/9)
-* Port 8888 is already in use on your system (edit `config_rtl.py` and `config_webrx.py` and replace this port number with another).
-* THe Pi doesn't start with RTL-SDR is plugged in / restarts when plugging in RTL-SDR / fails to recongize RTL-SDR: maybe your power supply cannot provide enough current. You should try a dedicated 5V / 2A power supply [like this](http://www.adafruit.com/product/1995). I wasn't able to use the RPi from a laptop USB port, needed a dedicated PSU.
+* Port 8888 is already in use on your system:
+  * Edit `config_rtl.py` and `config_webrx.py` and replace this port number with another).
+* The Pi doesn't start with RTL-SDR is plugged in / restarts when plugging in RTL-SDR / fails to recongize RTL-SDR: 
+  * Maybe your power supply cannot provide enough current. You should try a dedicated 5V / 2A power supply [like this](http://www.adafruit.com/product/1995). I wasn't able to use the RPi from a laptop USB port, needed a dedicated PSU.
 
 ## Compromise between performance and the maximum number of clients