mirror of
https://github.com/g4klx/MMDVM_HS.git
synced 2025-12-06 07:02:00 +01:00
Merge branch 'master' into duplex
This commit is contained in:
Andy CA6JAU
commit
1f05eaecec
177
BUILD.txt
177
BUILD.txt
|
|
@ -1,5 +1,5 @@
|
|||
Building instructions:
|
||||
|
||||
=====================
|
||||
1) Raspberry Pi with ZUMSpot Pi:
|
||||
|
||||
* Download latest Raspbian image and install to a micro SD
|
||||
|
|
@ -90,10 +90,91 @@ nano MMDVM.ini
|
|||
2) ZUMSpot USB:
|
||||
|
||||
* Windows:
|
||||
coming soon...
|
||||
- Download and install the version 1.6.9 of the Arduino IDE:
|
||||
https://www.arduino.cc/en/Main/OldSoftwareReleases#previous
|
||||
|
||||
* Linux:
|
||||
coming soon...
|
||||
- Download STM32duino (Arduino for STM32) from this URL:
|
||||
https://github.com/rogerclarkmelbourne/Arduino_STM32/tree/ZUMspot
|
||||
|
||||
- Unzip to create the Arduino_STM32 folder
|
||||
|
||||
- Copy Arduino_STM32 folder in:
|
||||
My Documents/Arduino/hardware
|
||||
|
||||
- Install the USB bootloader to STM32F103. Follow the instructions:
|
||||
https://github.com/rogerclarkmelbourne/Arduino_STM32/wiki/stm32duino-bootloader
|
||||
|
||||
- Start the Arduino IDE. Open the MMDVM_HS.ino file in the MMDVM_HS folder.
|
||||
|
||||
- Under the menu "Tools" select "Board" and then select:
|
||||
Board: Generic STM32F103C Series
|
||||
Variant: STM32F103C8 (20k RAM, 64k Flash)
|
||||
CPU Speed: 72 MHz (Normal)
|
||||
Upload method: STM32duino bootloader (you have transfered the USB bootloader before)
|
||||
Serial port: COMx (Maple Mini)
|
||||
|
||||
- Edit Config.h according your board:
|
||||
#define PI_HAT_7021_REV_03 (only if your board is ZUMSpot USB)
|
||||
#define ADF7021_CARRIER_BOARD (only if your board is ZUMSpot Libre Kit)
|
||||
#define ENABLE_ADF7021
|
||||
#define ADF7021_N_VER (only if your board uses ADF7021N)
|
||||
#define BIDIR_DATA_PIN
|
||||
#define ADF7021_14_7456
|
||||
#define STM32_USB_HOST
|
||||
#define ENABLE_SCAN_MODE
|
||||
|
||||
- Click the Upload button in the IDE and wait for the transfer.
|
||||
|
||||
* Linux Raspbian:
|
||||
cd ~
|
||||
- Install the necessary software tools:
|
||||
sudo apt-get update
|
||||
sudo apt-get install gcc-arm-none-eabi gdb-arm-none-eabi
|
||||
|
||||
- Download the sources:
|
||||
git clone https://github.com/juribeparada/MMDVM_HS
|
||||
cd MMDVM_HS/
|
||||
git clone https://github.com/juribeparada/STM32F10X_Lib
|
||||
|
||||
- Edit Config.h
|
||||
nano Config.h
|
||||
(and enable):
|
||||
#define PI_HAT_7021_REV_03 (only if your board is ZUMSpot USB)
|
||||
#define ADF7021_CARRIER_BOARD (only if your board is ZUMSpot Libre Kit)
|
||||
#define ENABLE_ADF7021
|
||||
#define ADF7021_N_VER (only if your board uses ADF7021N)
|
||||
#define BIDIR_DATA_PIN
|
||||
#define ADF7021_14_7456
|
||||
#define STM32_USB_HOST
|
||||
#define ENABLE_SCAN_MODE
|
||||
|
||||
- Build the firmware with bootloader support:
|
||||
make bl
|
||||
|
||||
- Upload bootloader and firmware to ZUMSpot USB board, using serial port first (you
|
||||
are using an USB-serial converter with device name /dev/ttyUSB0):
|
||||
|
||||
Hold BOOT0 (or move BOOT0 jumper to 1), next press and release RESET
|
||||
|
||||
sudo make serial-bl devser=/dev/ttyUSB0
|
||||
|
||||
Release BOOT0 (or move BOOT0 jumper to 0)
|
||||
|
||||
- For following firmware updates, you could use the USB port directly:
|
||||
sudo make dfu devser=/dev/ttyACM0
|
||||
|
||||
* Install MMDVMHost:
|
||||
cd ~
|
||||
git clone https://github.com/g4klx/MMDVMHost/
|
||||
cd MMDVMHost/
|
||||
make
|
||||
|
||||
- Edit MMDVM.ini according your preferences
|
||||
nano MMDVM.ini
|
||||
(use Port=/dev/ttyACM0 in [Modem])
|
||||
|
||||
- Execute MMDVMHost:
|
||||
./MMDVMHost MMDVM.ini
|
||||
|
||||
3) Makefile options:
|
||||
|
||||
|
|
@ -145,5 +226,91 @@ sudo make zumspot-pi
|
|||
|
||||
4) Config.h options:
|
||||
|
||||
coming soon...
|
||||
#define PI_HAT_7021_REV_02: enable pinouts for first revision of ZUMSpot Pi. In general is
|
||||
not used.
|
||||
|
||||
#define PI_HAT_7021_REV_03: enable pinouts support for ZUMSpot Pi or ZUMSpot USB. You have
|
||||
to enable this option if you have one of these products.
|
||||
|
||||
#define ADF7021_CARRIER_BOARD: enable this option if you have a ZUMSpot Libre Kit (Board with
|
||||
modified RF7021SE and Blue Pill STM32F103).
|
||||
|
||||
#define ENABLE_ADF7021: add support for ADF7021 (all boards, enabled by default).
|
||||
|
||||
#define ADF7021_N_VER: enable support for narrow band version of ADF7021 (ADF7021N). Disabled
|
||||
by default, in general all boards will have just ADF7021.
|
||||
|
||||
#define DUPLEX: enable duplex mode with dual ADF7021. It is still under development.
|
||||
|
||||
#define BIDIR_DATA_PIN: enable Standard TX/RX Data Interface of ADF7021 (enabled by default,
|
||||
needed for scanning mode detection feature).
|
||||
|
||||
#define ADF7021_14_7456: select this option if your board uses a 14.7456 MHz (enabled by default).
|
||||
|
||||
#define ADF7021_12_2880: select this option if your board uses a 12.2880 MHz.
|
||||
|
||||
#define ADF7021_ENABLE_4FSK_AFC: enable AFC support for DMR, YSF and P25. This is experimental,
|
||||
depending on your frequency offset this option will improve or not your BER reception.
|
||||
|
||||
#define ADF7021_AFC_POS: enable this option if you can not receive any signal after enable the
|
||||
ADF7021_ENABLE_4FSK_AFC option.
|
||||
|
||||
#define STM32_USART1_HOST: enable direct serial host communication with ZUMSpot (using USART1
|
||||
PA9 and PA10 pins). Disable STM32_USB_HOST if you enable this option. Enable this if you have
|
||||
a ZUMSpot Pi. You don't need to enable this option if you will transfer the bootloader.
|
||||
|
||||
#define STM32_USB_HOST: enable USB host communication with ZUMSpot (using STM32F103 USB
|
||||
interface). Disable STM32_USART1_HOST if you enable this option. Enable this if you have
|
||||
a ZUMSpot USB or ZUMSpot Libre Kit.
|
||||
|
||||
#define ENABLE_SCAN_MODE: enable automatic mode detection in ZUMSpot. This is based on
|
||||
scanning over all enabled modes, and you could have some detection delay. Enabled by default.
|
||||
|
||||
#define SEND_RSSI_DATA: enable RSSI reports to MMDVMHost. It is already converted to dBm.
|
||||
|
||||
#define SERIAL_REPEATER: enable a second serial port (USART2, pins PA2 and PA3) for Nextion
|
||||
LCD display.
|
||||
|
||||
Pinout definitions for ZUMSpot Libre Kit (Carrier board):
|
||||
=========================================================
|
||||
- Main RF7021SE board:
|
||||
CE PC14
|
||||
SLE PB8
|
||||
SREAD PB7
|
||||
SDATA PB6
|
||||
SCLK PB5
|
||||
DATA PB4 (TxRxData)
|
||||
DCLK PB3 (TxRxCLK)
|
||||
CLKOUT PA15 (jumper wire in RF7021SE)
|
||||
PAC PB14 (PTT LED)
|
||||
VCC 3.3 V
|
||||
GND Ground
|
||||
|
||||
- Second RF7021SE board (duplex mode, experimental):
|
||||
SLE PA6
|
||||
DATA PA4
|
||||
DCLK PA5
|
||||
PAC NC
|
||||
CLKOUT NC
|
||||
VCC 3.3 V
|
||||
GND Ground
|
||||
|
||||
SDATA, SREAD, SCLK and CE are shared with the main ADF7021.
|
||||
|
||||
- Serial ports:
|
||||
TXD PA9 (serial port host communication)
|
||||
RXD PA10 (serial port host communication)
|
||||
DISP_TXD PA2 (Nextion LCD serial repeater)
|
||||
DISP_RXD PA3 (Nextion LCD serial repeater)
|
||||
|
||||
- Status LEDs:
|
||||
COS_LED PB15
|
||||
PTT_LED PB14
|
||||
P25_LED PB0
|
||||
YSF_LED PB1
|
||||
DMR_LED PB13
|
||||
DSTAR_LED PB12
|
||||
|
||||
- Misc pins:
|
||||
PIN_LED PC13 (status led)
|
||||
PIN_DEB PB9 (debugging pin)
|
||||
|
|
|
|||
5
Makefile
5
Makefile
|
|
@ -59,6 +59,11 @@ else
|
|||
DFU_UTIL=./STM32F10X_Lib/utils/rpi32/dfu-util
|
||||
ST_FLASH=./STM32F10X_Lib/utils/rpi32/st-flash
|
||||
STM32FLASH=./STM32F10X_Lib/utils/rpi32/stm32flash
|
||||
else ifeq ($(shell uname -m),armv6l)
|
||||
DFU_RST=./STM32F10X_Lib/utils/rpi32/upload-reset
|
||||
DFU_UTIL=./STM32F10X_Lib/utils/rpi32/dfu-util
|
||||
ST_FLASH=./STM32F10X_Lib/utils/rpi32/st-flash
|
||||
STM32FLASH=./STM32F10X_Lib/utils/rpi32/stm32flash
|
||||
else
|
||||
DFU_RST=./STM32F10X_Lib/utils/linux/upload-reset
|
||||
DFU_UTIL=./STM32F10X_Lib/utils/linux/dfu-util
|
||||
|
|
|
|||
Loading…
Reference in a new issue