MMDVMHost/MMDVM.ini

[General]
Callsign=G9BF
Timeout=180
Duplex=1
# ModeHang=10
RFModeHang=10
NetModeHang=3
Display=None
Daemon=0

[Info]
RXFrequency=435000000
TXFrequency=435000000
Power=1
Latitude=0.0
Longitude=0.0
Height=0
Location=Nowhere
Description=Multi-Mode Repeater
URL=www.google.co.uk

[Log]
# Logging levels, 0=No logging
DisplayLevel=1
FileLevel=1
FilePath=.
FileRoot=MMDVM

[CW Id]
Enable=1
Time=10

[Modem]
# Port=/dev/ttyACM0
Port=\\.\COM3
TXInvert=1
RXInvert=0
PTTInvert=0
TXDelay=100
DMRDelay=0
RXLevel=50
TXLevel=50
# D-StarTXLevel=50
# DMRTXLevel=50
# YSFTXLevel=50
# P25TXLevel=50
OscOffset=0
RSSIMultiplier=1
RSSIOffset=10
Debug=0

[D-Star]
Enable=1
Module=C
SelfOnly=0

[DMR]
Enable=1
Beacons=1
Id=123456
ColorCode=1
SelfOnly=0
# Prefixes=234,235
LookupFile=DMRIds.dat
CallHang=3
TXHang=4
#Blacklist=
#DstIdBlackListSlot1RF=
#DstIdBlackListSlot2RF=
#DstIdWhiteListSlot1RF=
#DstIdWhiteListSlot2RF=
#DstIdBlackListSlot1NET=
#DstIdBlackListSlot2NET=
#DstIdWhiteListSlot1NET=
#DstIdWhiteListSlot2NET=
TGRewriteSlot1=0
TGRewriteSlot2=0
BMAutoRewrite=0
BMRewriteReflectorVoicePrompts=0


DirectDial=0
TargetTG=9
#RewriteMapSlot1=
#RewritemapSlot2=

[System Fusion]
Enable=1
RemoteGateway=0

[P25]
Enable=1
NAC=293

[D-Star Network]
Enable=1
GatewayAddress=127.0.0.1
GatewayPort=20010
LocalPort=20011
Debug=0

[DMR Network]
Enable=1
Address=44.131.4.1
Port=62031
Jitter=300
# Local=3350
Password=PASSWORD
RSSI=0
Slot1=1
Slot2=1
Debug=0

[System Fusion Network]
Enable=1
LocalAddress=127.0.0.1
LocalPort=3200
GwyAddress=127.0.0.1
GwyPort=4200
Debug=0

[P25 Network]
Enable=1
GatewayAddress=127.0.0.1
GatewayPort=20012
LocalPort=20013
Debug=0

[TFT Serial]
Port=/dev/ttyAMA0
Brightness=50

[HD44780]
Rows=2
Columns=16

# For basic HD44780 displays (4-bit connection)
# rs, strb, d0, d1, d2, d3
Pins=11,10,0,1,2,3

# Device address for I2C
I2CAddress=0x20

# PWM backlight
PWM=0
PWMPin=21
PWMBright=100
PWMDim=16

DisplayClock=1
UTC=0

[Nextion]
Port=/dev/ttyAMA0
Brightness=50
DisplayClock=1
UTC=0
IdleBrightness=20

[OLED]
Type=3
Brightness=0
Invert=0
Initial commit 2016-01-14 18:45:04 +00:00			`[General]`
			`Callsign=G9BF`
Handle data transmissions and use new method for timing spacing on RF. 2016-01-18 18:36:14 +00:00			`Timeout=180`
Initial commit 2016-01-14 18:45:04 +00:00			`Duplex=1`
Add seperate RF and Network mode timeouts. 2016-06-22 18:03:56 +01:00			`# ModeHang=10`
			`RFModeHang=10`
			`NetModeHang=3`
Initial commit 2016-01-14 18:45:04 +00:00			`Display=None`
Add daemonisation under Linux and other enhancements (from Simon G7RZU) 2016-05-03 23:01:49 +01:00			`Daemon=0`
Initial commit 2016-01-14 18:45:04 +00:00
			`[Info]`
			`RXFrequency=435000000`
			`TXFrequency=435000000`
			`Power=1`
DMR beacon handling. 2016-01-14 19:58:16 +00:00			`Latitude=0.0`
			`Longitude=0.0`
Initial commit 2016-01-14 18:45:04 +00:00			`Height=0`
			`Location=Nowhere`
			`Description=Multi-Mode Repeater`
			`URL=www.google.co.uk`

			`[Log]`
			`# Logging levels, 0=No logging`
Modify the logging system greatly. 2016-03-07 18:42:05 +00:00			`DisplayLevel=1`
			`FileLevel=1`
			`FilePath=.`
			`FileRoot=MMDVM`
Initial commit 2016-01-14 18:45:04 +00:00
Add the CW Id. 2016-05-09 21:55:44 +01:00			`[CW Id]`
			`Enable=1`
			`Time=10`

Initial commit 2016-01-14 18:45:04 +00:00			`[Modem]`
			`# Port=/dev/ttyACM0`
			`Port=\\.\COM3`
			`TXInvert=1`
			`RXInvert=0`
			`PTTInvert=0`
			`TXDelay=100`
Add DMR slot delay parameter. 2016-03-17 18:12:14 +00:00			`DMRDelay=0`
Initial commit 2016-01-14 18:45:04 +00:00			`RXLevel=50`
			`TXLevel=50`
Add independent mode output levels. 2016-08-09 07:08:37 +01:00			`# D-StarTXLevel=50`
			`# DMRTXLevel=50`
			`# YSFTXLevel=50`
Start full host support got P25. 2016-09-08 18:38:59 +01:00			`# P25TXLevel=50`
Handle any frequency offset in the oscillator. 2016-03-21 21:50:45 +00:00			`OscOffset=0`
Add RSSI reporting for DMR only. 2016-08-08 21:26:18 +01:00			`RSSIMultiplier=1`
			`RSSIOffset=10`
More work with decoding and regenerating P25. 2016-09-13 18:27:50 +01:00			`Debug=0`
Initial commit 2016-01-14 18:45:04 +00:00
			`[D-Star]`
			`Enable=1`
			`Module=C`
Allow for locking the MMDVM to the callsign or id of the repeater/hostspot. 2016-04-04 17:40:05 +01:00			`SelfOnly=0`
Initial commit 2016-01-14 18:45:04 +00:00
			`[DMR]`
			`Enable=1`
DMR beacon handling. 2016-01-14 19:58:16 +00:00			`Beacons=1`
Initial commit 2016-01-14 18:45:04 +00:00			`Id=123456`
			`ColorCode=1`
Allow for locking the MMDVM to the callsign or id of the repeater/hostspot. 2016-04-04 17:40:05 +01:00			`SelfOnly=0`
Disable the DMR prefixes by default. 2016-04-05 06:28:00 +01:00			`# Prefixes=234,235`
Translate DMR Id to callsign from a file. 2016-04-12 18:26:13 +01:00			`LookupFile=DMRIds.dat`
Add a DMR hang time for locking out disimilar calls. 2016-06-16 21:40:05 +01:00			`CallHang=3`
Split the DMR TX hang time from the mode hang time. 2016-05-05 17:56:18 +01:00			`TXHang=4`
Added blacklist and whitelist options (commented out) 2016-06-07 15:39:12 +01:00			`#Blacklist=`
Additions to support separate network/rf access control 2016-07-10 21:39:58 +01:00			`#DstIdBlackListSlot1RF=`
			`#DstIdBlackListSlot2RF=`
			`#DstIdWhiteListSlot1RF=`
			`#DstIdWhiteListSlot2RF=`
			`#DstIdBlackListSlot1NET=`
			`#DstIdBlackListSlot2NET=`
			`#DstIdWhiteListSlot1NET=`
			`#DstIdWhiteListSlot2NET=`
Added separate config section for DMR TG Rewrite 2016-09-18 21:59:05 +01:00			`TGRewriteSlot1=0`
Next release of TG Rewrite 2016-09-21 19:35:13 +01:00			`TGRewriteSlot2=0`
Added separate config section for DMR TG Rewrite 2016-09-18 21:59:05 +01:00			`BMAutoRewrite=0`
Conf options 2016-09-19 12:54:41 +01:00			`BMRewriteReflectorVoicePrompts=0`
Next release of TG Rewrite 2016-09-21 19:35:13 +01:00

Added separate config section for DMR TG Rewrite 2016-09-18 21:59:05 +01:00			`DirectDial=0`
			`TargetTG=9`
Conf options 2016-09-19 12:54:41 +01:00			`#RewriteMapSlot1=`
			`#RewritemapSlot2=`
Added blacklist and whitelist options (commented out) 2016-06-07 15:39:12 +01:00
Initial commit 2016-01-14 18:45:04 +00:00			`[System Fusion]`
			`Enable=1`
Allow for remote System Fusion gateway operation. 2016-09-26 18:07:06 +01:00			`RemoteGateway=0`
Initial commit 2016-01-14 18:45:04 +00:00
Start full host support got P25. 2016-09-08 18:38:59 +01:00			`[P25]`
			`Enable=1`
A semi-working P25 repeater without much FEC. 2016-09-12 23:26:05 +01:00			`NAC=293`
Start full host support got P25. 2016-09-08 18:38:59 +01:00
Initial commit 2016-01-14 18:45:04 +00:00			`[D-Star Network]`
			`Enable=1`
			`GatewayAddress=127.0.0.1`
			`GatewayPort=20010`
			`LocalPort=20011`
			`Debug=0`

			`[DMR Network]`
			`Enable=1`
			`Address=44.131.4.1`
			`Port=62031`
Configurable DMR jitter buffer. 2016-09-06 19:42:15 +01:00			`Jitter=300`
Allow for setting of outgoing port number on DMR networking. 2016-04-03 19:11:45 +01:00			`# Local=3350`
Initial commit 2016-01-14 18:45:04 +00:00			`Password=PASSWORD`
Add RSSI reporting for DMR only. 2016-08-08 21:26:18 +01:00			`RSSI=0`
Allow for the disabling of individual slots from the network. 2016-02-15 20:36:05 +00:00			`Slot1=1`
			`Slot2=1`
Switch off DMR network debugging. 2016-04-21 17:12:47 +01:00			`Debug=0`
Initial commit 2016-01-14 18:45:04 +00:00
			`[System Fusion Network]`
Add Adrian's C4FM reflector. 2016-05-19 17:44:12 +01:00			`Enable=1`
Rename config file values. 2016-06-08 06:10:51 +01:00			`LocalAddress=127.0.0.1`
			`LocalPort=3200`
Update MMDVM.ini Allow a easier working config for fusion ? 2016-07-06 19:54:09 +10:00			`GwyAddress=127.0.0.1`
Updates to support the YSF Reflector. 2016-06-07 21:17:57 +01:00			`GwyPort=4200`
Add Adrian's C4FM reflector. 2016-05-19 17:44:12 +01:00			`Debug=0`
Initial commit 2016-01-14 18:45:04 +00:00
Start full host support got P25. 2016-09-08 18:38:59 +01:00			`[P25 Network]`
			`Enable=1`
			`GatewayAddress=127.0.0.1`
Change conflicting ports 2016-09-28 09:55:02 +02:00			`GatewayPort=20012`
			`LocalPort=20013`
Start full host support got P25. 2016-09-08 18:38:59 +01:00			`Debug=0`

Initial commit 2016-01-14 18:45:04 +00:00			`[TFT Serial]`
			`Port=/dev/ttyAMA0`
Upgrade the TFT Serial display driver and displayed information. 2016-02-16 18:30:12 +00:00			`Brightness=50`
Add the HD4470 type display to Raspberry Pis. 2016-03-14 22:58:09 +00:00
			`[HD44780]`
			`Rows=2`
			`Columns=16`
Make I2C address configurable for HD44780 LCD variations Also add a basic README with some pointers on how to connect and configure the LCDs 2016-06-30 20:10:30 +01:00
			`# For basic HD44780 displays (4-bit connection)`
Allow for the configuration of the HD44780 pins. 2016-04-06 17:43:20 +01:00			`# rs, strb, d0, d1, d2, d3`
Use the duplex flag to indicate that a DVMega is being used. 2016-05-05 17:08:23 +01:00			`Pins=11,10,0,1,2,3`
HD44780 PWM backlight control 2016-05-01 16:59:43 +01:00
Make I2C address configurable for HD44780 LCD variations Also add a basic README with some pointers on how to connect and configure the LCDs 2016-06-30 20:10:30 +01:00			`# Device address for I2C`
			`I2CAddress=0x20`

Add a clock to the idle screen 2016-05-28 23:29:30 +03:00			`# PWM backlight`
			`PWM=0`
HD44780 PWM backlight control 2016-05-01 16:59:43 +01:00			`PWMPin=21`
			`PWMBright=100`
			`PWMDim=16`
Make I2C address configurable for HD44780 LCD variations Also add a basic README with some pointers on how to connect and configure the LCDs 2016-06-30 20:10:30 +01:00
Add a clock to the idle screen 2016-05-28 23:29:30 +03:00			`DisplayClock=1`
Correct MMDVM.ini flag error for UTC clock display 2016-05-28 23:36:04 +03:00			`UTC=0`
Add a clock to the idle screen 2016-05-28 23:29:30 +03:00
And the associated .ini file. 2016-04-06 19:55:28 +01:00			`[Nextion]`
			`Port=/dev/ttyAMA0`
			`Brightness=50`
Add the idle clock to the Nextion display. 2016-06-01 11:55:24 +01:00			`DisplayClock=1`
			`UTC=0`
Make the Nextion idle brightness level configurable. 2016-06-24 10:33:28 +01:00			`IdleBrightness=20`
Initial version DMR works 2016-05-07 01:03:39 +02:00
			`[OLED]`
			`Type=3`
			`Brightness=0`
			`Invert=0`