g4klx/MMDVMHost
1
0
Fork 0
mirror of https://github.com/g4klx/MMDVMHost.git synced 2026-04-04 14:07:36 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions
MMDVMHost/MMDVM.ini

299 lines
3.7 KiB
INI
Raw Normal View History

Initial commit
2016-01-14 18:45:04 +00:00
[General]
Callsign=G9BF
Move the Id into the General section.
2017-08-19 16:23:37 +01:00
Id=123456
Handle data transmissions and use new method for timing spacing on RF.
2016-01-18 18:36:14 +00:00
Timeout=180
Initial commit
2016-01-14 18:45:04 +00:00
Duplex=1
Add seperate RF and Network mode timeouts.
2016-06-22 18:03:56 +01:00
# ModeHang=10
RFModeHang=10
NetModeHang=3
Initial commit
2016-01-14 18:45:04 +00:00
Display=None
Add daemonisation under Linux and other enhancements (from Simon G7RZU)
2016-05-03 23:01:49 +01:00
Daemon=0
Initial commit
2016-01-14 18:45:04 +00:00
[Info]
RXFrequency=435000000
TXFrequency=435000000
Power=1
DMR beacon handling.
2016-01-14 19:58:16 +00:00
Latitude=0.0
Longitude=0.0
Initial commit
2016-01-14 18:45:04 +00:00
Height=0
Location=Nowhere
Description=Multi-Mode Repeater
URL=www.google.co.uk
[Log]
# Logging levels, 0=No logging
Modify the logging system greatly.
2016-03-07 18:42:05 +00:00
DisplayLevel=1
FileLevel=1
FilePath=.
FileRoot=MMDVM
Initial commit
2016-01-14 18:45:04 +00:00
Add the CW Id.
2016-05-09 21:55:44 +01:00
[CW Id]
Enable=1
Time=10
Allow for optional seperate (and longer) CW Ids.
2017-04-10 17:55:53 +01:00
# Callsign=
Add the CW Id.
2016-05-09 21:55:44 +01:00
Load the DMR Id lookup table periodically.
2016-10-10 19:15:30 +01:00
[DMR Id Lookup]
File=DMRIds.dat
Time=24
Add more NXDN support files.
2018-01-17 21:21:25 +00:00
[NXDN Id Lookup]
New NXDN Id lookup file.
2018-02-06 18:38:29 +00:00
File=NXDN.csv
Add more NXDN support files.
2018-01-17 21:21:25 +00:00
Time=24
Initial commit
2016-01-14 18:45:04 +00:00
[Modem]
# Port=/dev/ttyACM0
Adding a modem port template Adding the line # Port=/dev/ttyAMA0 to MMDVM.ini [Modem] section, to make it easier to try out the correct port setting fore the more and more commonly used STM32 Pi hat boards.
2018-02-13 13:45:27 +01:00
# Port=/dev/ttyAMA0
Rename RXBoost to RFAudioBoost.
2020-04-28 14:39:14 +01:00
Port=\\.\COM4
Clean up the I2C code.
2018-07-19 18:42:23 +01:00
Protocol=uart
# Address=0x22
Initial commit
2016-01-14 18:45:04 +00:00
TXInvert=1
RXInvert=0
PTTInvert=0
TXDelay=100
Add Tx and Rx frequency offsets Enables specification of independant Tx and Rx offsets in Hz for Tx and Rx frequencies on DVMega and MMDVM_HS hardware. Tx and Rx frequencies no longer have to be offset for frequency errors in ADF7021 devices and dashboards (BM/DMR+) will now display intended frequencies.
2017-06-14 16:44:23 +01:00
RXOffset=0
TXOffset=0
Add DMR slot delay parameter.
2016-03-17 18:12:14 +00:00
DMRDelay=0
Initial commit
2016-01-14 18:45:04 +00:00
RXLevel=50
TXLevel=50
Add the optional RX DC Offset parameter.
2017-10-28 12:37:32 +01:00
RXDCOffset=0
Add an optional transmi DC offset value.
2017-08-20 12:07:57 +01:00
TXDCOffset=0
RF power level control for MMDVM_HS compatible devices
2017-12-30 12:05:11 -03:00
RFLevel=100
Add controls for the CW Id level.
2016-10-10 17:46:37 +01:00
# CWIdTXLevel=50
Add independent mode output levels.
2016-08-09 07:08:37 +01:00
# D-StarTXLevel=50
# DMRTXLevel=50
# YSFTXLevel=50
Start full host support got P25.
2016-09-08 18:38:59 +01:00
# P25TXLevel=50
Initial commit of NXDN scaffolding.
2018-01-11 19:35:33 +00:00
# NXDNTXLevel=50
nitial commit of POCSAG files.
2018-06-07 18:46:03 +01:00
# POCSAGTXLevel=50
Move the levels to the overall MMDVM control message.
2020-04-12 15:10:51 +01:00
# FMTXLevel=50
Use a linear interpolator for the reported RSSI values.
2016-12-21 19:58:46 +00:00
RSSIMappingFile=RSSI.dat
Move modem tracing to Trace and add a new modem Debug function.
2017-04-14 14:05:30 +01:00
Trace=0
More work with decoding and regenerating P25.
2016-09-13 18:27:50 +01:00
Debug=0
Initial commit
2016-01-14 18:45:04 +00:00
Add modem transparent modem data mode. Not used on the MMDVM currently.
2018-03-22 07:13:13 +00:00
[Transparent Data]
Enable=0
RemoteAddress=127.0.0.1
RemotePort=40094
LocalPort=40095
Added SendFrameType with default value option to MMDVM.ini
2018-08-14 18:29:07 +02:00
# SendFrameType=0
Add modem transparent modem data mode. Not used on the MMDVM currently.
2018-03-22 07:13:13 +00:00
Add the host support for the UMP.
2016-11-03 19:07:44 +00:00
[UMP]
Enable=0
# Port=\\.\COM4
Port=/dev/ttyACM1
Initial commit
2016-01-14 18:45:04 +00:00
[D-Star]
Enable=1
Module=C
Allow for locking the MMDVM to the callsign or id of the repeater/hostspot.
2016-04-04 17:40:05 +01:00
SelfOnly=0
Make the D-Star ack optional.
2017-06-10 13:18:18 +01:00
AckReply=1
Use correct parameter for Timers
2017-06-16 08:58:30 +02:00
AckTime=750
Add select ack message dstar AckMessage = 0 set BER status AckMessage = 1 set RSSI status
2018-09-14 12:30:48 +02:00
AckMessage=0
Add an optional error reply for D-Star.
2017-02-16 19:49:58 +00:00
ErrorReply=1
Add remote gateway modes to D-Star and P25.
2017-11-09 09:21:22 +00:00
RemoteGateway=0
Allow for per mode RF and Network mode hang times.
2017-09-01 09:25:54 +01:00
# ModeHang=10
Initial commit
2016-01-14 18:45:04 +00:00
[DMR]
Enable=1
Add locally timed DMR roaming beacons.
2018-01-15 19:22:01 +00:00
Beacons=0
Add more DMR beacon parameters.
2018-01-16 18:35:29 +00:00
BeaconInterval=60
BeaconDuration=3
Initial commit
2016-01-14 18:45:04 +00:00
ColorCode=1
Allow for locking the MMDVM to the callsign or id of the repeater/hostspot.
2016-04-04 17:40:05 +01:00
SelfOnly=0
Optional non Embedded LC data suppression
2017-01-16 13:10:23 +01:00
EmbeddedLCOnly=0
Increase TA and GPS to message level, and allow it to be controlled from the ini file.
2017-02-27 20:17:55 +00:00
DumpTAData=1
Disable the DMR prefixes by default.
2016-04-05 06:28:00 +01:00
# Prefixes=234,235
Add RSSI display for all modes.
2017-01-05 19:15:10 +00:00
# Slot1TGWhiteList=
# Slot2TGWhiteList=
Add a DMR hang time for locking out disimilar calls.
2016-06-16 21:40:05 +01:00
CallHang=3
Split the DMR TX hang time from the mode hang time.
2016-05-05 17:56:18 +01:00
TXHang=4
Allow for per mode RF and Network mode hang times.
2017-09-01 09:25:54 +01:00
# ModeHang=10
use enum DMR_OVCM_TYPES
2019-11-17 10:57:58 +08:00
# OVCM Values, 0=off, 1=rx_on, 2=tx_on, 3=both_on
Comment out the OVCM=1 in MMDVM.ini
2019-11-06 13:23:49 +08:00
# OVCM=0
Added blacklist and whitelist options (commented out)
2016-06-07 15:39:12 +01:00
Initial commit
2016-01-14 18:45:04 +00:00
[System Fusion]
Enable=1
Add YSF low deviation mode.
2017-03-23 20:26:17 +00:00
LowDeviation=0
Add SelfOnly to YSF.
2017-08-15 10:11:05 +01:00
SelfOnly=0
Add the YSF TX hang parameter.
2018-05-21 21:32:33 +01:00
TXHang=4
Make DGID an alias of DSQ for YSF.
2018-03-29 07:50:57 +01:00
#DGID=1
Allow for remote System Fusion gateway operation.
2016-09-26 18:07:06 +01:00
RemoteGateway=0
Allow for per mode RF and Network mode hang times.
2017-09-01 09:25:54 +01:00
# ModeHang=10
Initial commit
2016-01-14 18:45:04 +00:00
Start full host support got P25.
2016-09-08 18:38:59 +01:00
[P25]
Enable=1
A semi-working P25 repeater without much FEC.
2016-09-12 23:26:05 +01:00
NAC=293
Add SelfOnly to P25 based on the DMR Id.
2017-08-15 10:30:05 +01:00
SelfOnly=0
Modify the P25 UID check slightly.
2017-03-29 20:46:27 +01:00
OverrideUIDCheck=0
Add remote gateway modes to D-Star and P25.
2017-11-09 09:21:22 +00:00
RemoteGateway=0
Add the P25 and NXDN transmit hang timer settings.
2020-05-06 17:10:23 +01:00
TXHang=5
Allow for per mode RF and Network mode hang times.
2017-09-01 09:25:54 +01:00
# ModeHang=10
Start full host support got P25.
2016-09-08 18:38:59 +01:00
Initial commit of NXDN scaffolding.
2018-01-11 19:35:33 +00:00
[NXDN]
Enable=1
Make 1 the default NXDN RAN.
2018-01-11 21:59:31 +00:00
RAN=1
Initial commit of NXDN scaffolding.
2018-01-11 19:35:33 +00:00
SelfOnly=0
RemoteGateway=0
Add the P25 and NXDN transmit hang timer settings.
2020-05-06 17:10:23 +01:00
TXHang=5
Initial commit of NXDN scaffolding.
2018-01-11 19:35:33 +00:00
# ModeHang=10
nitial commit of POCSAG files.
2018-06-07 18:46:03 +01:00
[POCSAG]
Enable=1
Add the POCSAG frequency to the modem protocol (for hotspots).
2018-06-12 19:40:49 +01:00
Frequency=439987500
nitial commit of POCSAG files.
2018-06-07 18:46:03 +01:00
Beginnings of FM support.
2020-04-09 22:02:47 +01:00
[FM]
Enable=1
Allow for a global callsign.
2020-04-24 15:37:26 +01:00
# Callsign=G4KLX
Beginnings of FM support.
2020-04-09 22:02:47 +01:00
CallsignSpeed=20
CallsignFrequency=1000
CallsignTime=10
Rescale some of the levels.
2020-04-24 13:16:21 +01:00
CallsignHoldoff=0
CallsignHighLevel=50
CallsignLowLevel=20
Beginnings of FM support.
2020-04-09 22:02:47 +01:00
CallsignAtStart=1
CallsignAtEnd=1
Host support for the CallsignAtLatch option.
2020-05-04 22:30:16 +01:00
CallsignAtLatch=0
Split the RF and Network acks.
2020-04-13 13:36:16 +01:00
RFAck=K
Rename RXBoost to RFAudioBoost.
2020-04-28 14:39:14 +01:00
ExtAck=N
Beginnings of FM support.
2020-04-09 22:02:47 +01:00
AckSpeed=20
AckFrequency=1750
Add the minimum time for a 'K' parameter.
2020-04-13 15:53:18 +01:00
AckMinTime=4
Beginnings of FM support.
2020-04-09 22:02:47 +01:00
AckDelay=1000
Rescale some of the levels.
2020-04-24 13:16:21 +01:00
AckLevel=50
Allow for a seperate FM timeout value.
2020-04-15 14:14:38 +01:00
# Timeout=180
Beginnings of FM support.
2020-04-09 22:02:47 +01:00
TimeoutLevel=80
Rescale some of the levels.
2020-04-24 13:16:21 +01:00
CTCSSFrequency=88.4
CTCSSThreshold=30
Add the low CTCSS threshold value.
2020-05-12 13:43:43 +01:00
# CTCSSHighThreshold=30
# CTCSSLowThreshold=20
Rescale some of the levels.
2020-04-24 13:16:21 +01:00
CTCSSLevel=20
Beginnings of FM support.
2020-04-09 22:02:47 +01:00
KerchunkTime=0
HangTime=7
Add two more FM parameters.
2020-04-25 15:15:56 +01:00
UseCOS=1
Add the COSInvert parameter.
2020-05-06 11:26:54 +01:00
COSInvert=0
Rename RXBoost to RFAudioBoost.
2020-04-28 14:39:14 +01:00
RFAudioBoost=1
Add the maximum deviation level.
2020-04-25 22:43:14 +01:00
MaxDevLevel=90
Rename RXBoost to RFAudioBoost.
2020-04-28 14:39:14 +01:00
ExtAudioBoost=1
Beginnings of FM support.
2020-04-09 22:02:47 +01:00
Initial commit
2016-01-14 18:45:04 +00:00
[D-Star Network]
Enable=1
GatewayAddress=127.0.0.1
GatewayPort=20010
LocalPort=20011
Allow for per mode RF and Network mode hang times.
2017-09-01 09:25:54 +01:00
# ModeHang=3
Initial commit
2016-01-14 18:45:04 +00:00
Debug=0
[DMR Network]
Enable=1
Address=44.131.4.1
Port=62031
Changing default Jitter time to 360 ms
2018-02-10 12:35:12 -03:00
Jitter=360
Change example local port for [DMR Network] in MMDVM.ini for easier linking with DMRGateway Just needs to be uncommented to work with DMRGateway out of the box now :-)
2017-06-11 16:05:49 +01:00
# Local=62032
Initial commit
2016-01-14 18:45:04 +00:00
Password=PASSWORD
Add the optional DMR network options command.
2016-11-03 19:27:52 +00:00
# Options=
Allow for the disabling of individual slots from the network.
2016-02-15 20:36:05 +00:00
Slot1=1
Slot2=1
Allow for per mode RF and Network mode hang times.
2017-09-01 09:25:54 +01:00
# ModeHang=3
Switch off DMR network debugging.
2016-04-21 17:12:47 +01:00
Debug=0
Initial commit
2016-01-14 18:45:04 +00:00
[System Fusion Network]
Add Adrian's C4FM reflector.
2016-05-19 17:44:12 +01:00
Enable=1
Rename config file values.
2016-06-08 06:10:51 +01:00
LocalAddress=127.0.0.1
LocalPort=3200
Rename config file values (acc. to #ee93e4ce)
2017-11-09 23:17:25 +01:00
GatewayAddress=127.0.0.1
GatewayPort=4200
Allow for per mode RF and Network mode hang times.
2017-09-01 09:25:54 +01:00
# ModeHang=3
Add Adrian's C4FM reflector.
2016-05-19 17:44:12 +01:00
Debug=0
Initial commit
2016-01-14 18:45:04 +00:00
Start full host support got P25.
2016-09-08 18:38:59 +01:00
[P25 Network]
Enable=1
GatewayAddress=127.0.0.1
Changed default P25 Network ports to match P25Gateway
2016-10-18 06:48:25 +01:00
GatewayPort=42020
LocalPort=32010
Allow for per mode RF and Network mode hang times.
2017-09-01 09:25:54 +01:00
# ModeHang=3
Start full host support got P25.
2016-09-08 18:38:59 +01:00
Debug=0
Add basic NXDN networking.
2018-01-15 21:03:34 +00:00
[NXDN Network]
Enable=1
Start adding the Kenwood protocol as an option.
2020-05-27 11:38:46 +01:00
Protocol=Icom
Allow more control over NXDN networking.
2018-03-12 20:55:53 +00:00
LocalAddress=127.0.0.1
LocalPort=14021
Use the correct ini entry for the NXDN Gateway address and port.
2018-03-15 06:27:22 +00:00
GatewayAddress=127.0.0.1
GatewayPort=14020
Add basic NXDN networking.
2018-01-15 21:03:34 +00:00
# ModeHang=3
Debug=0
nitial commit of POCSAG files.
2018-06-07 18:46:03 +01:00
[POCSAG Network]
Enable=1
LocalAddress=127.0.0.1
LocalPort=3800
GatewayAddress=127.0.0.1
GatewayPort=4800
# ModeHang=3
Debug=0
Initial commit
2016-01-14 18:45:04 +00:00
[TFT Serial]
Allow the modem to host a serial display.
2016-10-06 18:38:16 +01:00
# Port=modem
Initial commit
2016-01-14 18:45:04 +00:00
Port=/dev/ttyAMA0
Upgrade the TFT Serial display driver and displayed information.
2016-02-16 18:30:12 +00:00
Brightness=50
Add the HD4470 type display to Raspberry Pis.
2016-03-14 22:58:09 +00:00
[HD44780]
Rows=2
Columns=16
Make I2C address configurable for HD44780 LCD variations Also add a basic README with some pointers on how to connect and configure the LCDs
2016-06-30 20:10:30 +01:00
# For basic HD44780 displays (4-bit connection)
Allow for the configuration of the HD44780 pins.
2016-04-06 17:43:20 +01:00
# rs, strb, d0, d1, d2, d3
Use the duplex flag to indicate that a DVMega is being used.
2016-05-05 17:08:23 +01:00
Pins=11,10,0,1,2,3
HD44780 PWM backlight control
2016-05-01 16:59:43 +01:00
Make I2C address configurable for HD44780 LCD variations Also add a basic README with some pointers on how to connect and configure the LCDs
2016-06-30 20:10:30 +01:00
# Device address for I2C
I2CAddress=0x20
Add a clock to the idle screen
2016-05-28 23:29:30 +03:00
# PWM backlight
PWM=0
HD44780 PWM backlight control
2016-05-01 16:59:43 +01:00
PWMPin=21
PWMBright=100
PWMDim=16
Make I2C address configurable for HD44780 LCD variations Also add a basic README with some pointers on how to connect and configure the LCDs
2016-06-30 20:10:30 +01:00
Add a clock to the idle screen
2016-05-28 23:29:30 +03:00
DisplayClock=1
Correct MMDVM.ini flag error for UTC clock display
2016-05-28 23:36:04 +03:00
UTC=0
Add a clock to the idle screen
2016-05-28 23:29:30 +03:00
And the associated .ini file.
2016-04-06 19:55:28 +01:00
[Nextion]
Allow the modem to host a serial display.
2016-10-06 18:38:16 +01:00
# Port=modem
And the associated .ini file.
2016-04-06 19:55:28 +01:00
Port=/dev/ttyAMA0
Brightness=50
Add the idle clock to the Nextion display.
2016-06-01 11:55:24 +01:00
DisplayClock=1
UTC=0
Fix documentation in mmdvm.ini for Nextion layouts.
2017-11-23 11:56:45 +00:00
#Screen Layout: 0=G4KLX 2=ON7LDS
New Nextion screen layout with better looking fonts New parameter for selecting ON7LDS Nextion screen layout The active ip address of the host is showed on main screen Nextion DMR page: * Talker alias (if available) will be decoded and displayed (in green to know it's the TA) * Font will get smaller if TA is to long GPS data will be decoded and logged
2017-11-13 21:48:47 +01:00
ScreenLayout=2
Make the Nextion idle brightness level configurable.
2016-06-24 10:33:28 +01:00
IdleBrightness=20
Initial version DMR works
2016-05-07 01:03:39 +02:00
[OLED]
Type=3
Brightness=0
Invert=0
Add configurable scrolling to the OLED display.
2017-08-13 10:57:02 +01:00
Scroll=1
Add Support for OLED Rotate
2018-10-30 09:30:41 -05:00
Rotate=0
Integrate the new messages into the OLED display driver.
2018-10-31 16:54:57 +00:00
Cast=0
Introducing LogoScreensaver=1 or 0 parameter for blanking OLED diplays in idle
2019-09-27 22:28:57 +02:00
LogoScreensaver=1
Initial LCDproc support
2016-10-28 13:22:20 +01:00
Fix typo in MMDVM.ini [LCDproc] section and mend Conf.cpp accordingly
2016-10-29 11:28:56 +01:00
[LCDproc]
Initial LCDproc support
2016-10-28 13:22:20 +01:00
Address=localhost
Port=13666
#LocalPort=13667
LCDproc: Make dimming the status screen optional If you run another LCDproc client that doesn't dim the display when it displays its info, the display will effectively flash on and off (or dim/bright depending on your LCDd configuration) as it switches screens between MMDVMHost and the other client(s). Making the dimming optional and turning it off in the host stops this "annoyance".
2016-10-29 20:00:32 +01:00
DimOnIdle=0
Initial LCDproc support
2016-10-28 13:22:20 +01:00
DisplayClock=1
One last tweak for consistency!
2016-10-29 11:53:42 +01:00
UTC=0
Add MMDVM lock file based on an idea by DB1OFH.
2018-10-10 20:05:24 +01:00
More cleanups of the new lock file.
2018-10-11 12:14:47 +01:00
[Lock File]
Add MMDVM lock file based on an idea by DB1OFH.
2018-10-10 20:05:24 +01:00
Enable=0
File=/tmp/MMDVM_Active.lck
More cleanups of the new lock file.
2018-10-11 12:14:47 +01:00
Replace MobileGPS with gpsd.
2020-06-29 11:25:10 +01:00
[GPSD]
Add MobileGPS support for DMR.
2018-11-06 12:14:57 +00:00
Enable=0
Address=127.0.0.1
Replace MobileGPS with gpsd.
2020-06-29 11:25:10 +01:00
Port=2947
Add MobileGPS support for DMR.
2018-11-06 12:14:57 +00:00
Add remote control interface.
2019-01-07 11:03:37 +00:00
[Remote Control]
Enable=0
Port=7642
Reference in a new issue Copy permalink