From 5ab5b8f217f1bdabbb853a24a9e7a99e985213ec Mon Sep 17 00:00:00 2001 From: Erick Kinnee Date: Tue, 12 Mar 2019 12:21:25 -0500 Subject: [PATCH] Update README.md --- README.md | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/README.md b/README.md index f46b959..d546b56 100644 --- a/README.md +++ b/README.md @@ -22,33 +22,33 @@ I don't speak C++ and PInvoke is nasty. That being said, there's also not a pure .Net (C#) CAT control lib out there that I know of. # What needs done? -The project is in an early very phase. +The project is in an early very phase. The following is in no particular order, except the IRadio bit. -.5. Implement an IRadio interface. +1. Implement an IRadio interface. -1. Settle on how the radios and commands are defined. +2. Settle on how the radios and commands are defined. JSON? Or just use a .cs file (current)? -2. Need to support opening / using an arbitrary number of radios. +3. Need to support opening / using an arbitrary number of radios. RigControl can do 2. -3. Fully support asynchronous operations. +4. Fully support asynchronous operations. There's some handy events exposed by .net for data received on the Serial Port. -4. Add support for remote sharing of serial ports. +5. Add support for remote sharing of serial ports. -5. Implemtment the flrig control protocol. +6. Implemtment the flrig control protocol. Use this in place of flrig if desired. -6. Implement the ability to run as a service. +7. Implement the ability to run as a service. -7. Implement CAT and CIV control. +8. Implement CAT and CIV control. This will come with the first Icom radio implemented I figure.