diff --git a/config/config.template.ini b/config/config.template.ini
index 05c4c1f..80c82be 100644
--- a/config/config.template.ini
+++ b/config/config.template.ini
@@ -1,457 +1,457 @@
-########################
-# BOSWatch Config File #
-########################
-
-[BOSWatch]
-# set loglevel for logfile
-#   10 = debug
-#   20 = info
-#   30 = warning
-#   40 = error
-#   50 = critical
-loglevel = 10
-
-# BOSWatch use a rotating logfile
-# Rotating is at midnight
-# You can set the backupCount here
-# backupCount = 7 (keeps logfiles for a week)
-backupCount = 7
-
-# if you want to start BOSWatch as a daemon with rc2.d,
-# you have to set the path to rtl_fm and multimon-ng !
-# the path have to end with an /
-#rtl_path = /usr/local/bin/
-#multimon_path = /usr/local/bin/
-
-# if you are using many Plugins or Plugins with a long execution time
-# you could execute them in an asynchronous manner
-# It must be pointed out that enabling (0|1) this consume time,
-# so don't use it for one rapid Plugin
-processAlarmAsync = 0
-
-# Using RegEx-Filter (0 - off | 1 - on)
-# Filter-configuration in section [Filters]
-useRegExFilter = 0
-
-# for double check save the last n IDs
-# it is used in combination with double_ignore_time
-# 1 is required if you want to use the double alarm filter
-doubleFilter_ignore_entries = 10
-
-# time to ignore same alarm (only ID is checked) (sek)
-doubleFilter_ignore_time = 5
-
-# ignore msg is only usefull for POCSAG (0 - off | 1 - on)
-# 0: double check ignores the msg-text (only check ID + function)
-# 1: if you want to differentiate between with/ without msg
-# f.e. if they use quick-alarm (without text, then same ric with msg)
-# you will get more then one alarm anyway if the msg is different (receiving-problems)
-doubleFilter_check_msg = 0
-
-# writes the multimon-ng raw data stream into a text file named mm_raw.txt
-writeMultimonRaw = 1
-
-[NMAHandler]
-# you could use an logging handler for sending logging records to NotifyMyAndroid
-# enableHandler (0|1) will enable the NMA handler
-enableHandler = 0
-
-# loglevel for NMAHandler (see BOSWatch loglevel description)
-loglevel = 50
-
-# logging record will send to APIKey
-APIKey =
-
-# You could change the name of the application (default: BOSWatch)
-# (f.e. if you use more than one instance of BOSWatch)
-appName = BOSWatch
-
-
-[FMS]
-# look-up-table for adding a description
-# Using Description (0 - off | 1 - on)
-# descriptions loaded from csv/fms.csv
-idDescribed = 0
-
-[ZVEI]
-# look-up-table for adding a description
-# Using Description (0 - off | 1 - on)
-# descriptions loaded from csv/zvei.csv
-idDescribed = 0
-
-[POC]
-# some very simple filters:
-# Allow only this RICs (empty: allow all, separator ",")
-# f.e.: allow_ric = 1234566,1234567,1234568
-allow_ric =
-
-# Deny this RICs (empty: allow all, separator ",")
-# f.e.: deny_ric = 1234566,1234567,1234568
-deny_ric =
-
-# start and end of an allowed filter range
-filter_range_start = 0000000
-filter_range_end =   9999999
-
-# look-up-table for adding a description
-# Using Description (0 - off | 1 - on)
-# descriptions loaded from csv/poc.csv
-idDescribed = 0
-
-# Static Massages for Subrics.
-rica = Feuer
-ricb = TH
-ricc = AGT
-ricd = Unwetter
-
-[Filters]
-# RegEX Filter Configuration
-# http://www.regexr.com/ - RegEX Test Tool an Documentation
-# No Filter for a Typ/Plugin Combination = all Data pass
-# INDIVIDUAL_NAME = TYP;DATAFIELD;PLUGIN;FREQUENZ;REGEX
-# TYP				= the Data Typ (FMS|ZVEI|POC)
-# DATAFIELD	= the field of the Data Array (see readme.md in plugin folder)
-# PLUGIN			= the name of the Plugin to call with this Filter (* for all)
-# FREQUENZ		= the Frequenz to use the Filter (for more SDR Sticks (* for all))
-# REGEX			= the RegEX
-
-# only ZVEI to all Plugins with 25### at 85.5MHz
-#testfilter = ZVEI;zvei;*;85500000;25[0-9]{3}
-
-# only POCSAG to MySQL with the text "ALARM:" in the Message
-#pocTest = POC;msg;MySQL;*;ALARM:
-
-
-[Plugins]
-# turn the plugins on or off (0 - off | 1 - on)
-MySQL = 0
-httpRequest = 0
-eMail = 0
-BosMon = 0
-firEmergency = 0
-jsonSocket = 0
-notifyMyAndroid = 0
-SMS = 0
-Sms77 = 0
-FFAgent = 0
-Pushover = 0
-Telegram = 0
-yowsup = 0
-
-# for developing template-module
-template = 0
-
-
-[MySQL]
-# MySQL configuration
-dbserver = localhost
-dbuser = boswatch
-dbpassword = root
-database = boswatch
-
-# tables in the database
-tableFMS = bos_fms
-tableZVEI = bos_zvei
-tablePOC = bos_pocsag
-tableSIG = bos_signal
-
-# Signal RICs (empty: none set, separator ",")
-# f.e.: signal_ric = 1234566,1234567,1234568
-signal_ric = ## SIGNAL-RICS ##
-
-
-[httpRequest]
-# example URL http://example.com/remote.php?DESCR=%DESCR%
-
-# you can use the following wildcards in your URL as GET params:
-# http://en.wikipedia.org/wiki/Query_string
-
-# %FMS% = FMS Code
-# %STATUS% = FMS Status
-# %DIR% = Direction of the telegram (0/1)
-# %DIRT% = Direction of the telegram (Text-String)
-# %TSI% = Tactical Short Information (I-IV)
-# %DESCR% = Description from csv-file
-# %TIME% = Time (by script)
-# %DATE% = Date (by script)
-#fms_url = http://www.google.de?code=%FMS%&stat=%STATUS%
-fms_url =
-
-# %ZVEI% = ZVEI 5-tone Code
-# %DESCR% = Description from csv-file
-# %TIME% = Time (by script)
-# %DATE% = Date (by script)
-#zvei_url = http://www.google.de?zvei=%ZVEI%
-zvei_url =
-
-# %RIC% = Pocsag RIC
-# %FUNC% = Pocsac function/Subric (1-4)
-# %FUNCCHAR% = Pocsac function/Subric als character (a-d)
-# %FUNCTEXT% = Pocsac function/Subric static massage definded in pocsag section
-# %MSG% = Message of the Pocsag telegram
-# %BITRATE% = Bitrate of the Pocsag telegram
-# %DESCR% = Description from csv-file
-# %TIME% = Time (by script)
-# %DATE% = Date (by script)
-#poc_url = http://www.google.de?ric=%RIC%&subric=%FUNC%&msg=%MSG%
-poc_url =
-
-
-[eMail]
-# SMTP-Server
-smtp_server = localhost
-# Port of SMTP-Server (default:
-smtp_port =
-# use tls for connection (0|1)
-tls = 0
-# Use this, when SMTP-Server has restricted access
-user =
-password =
-
-# Parameters for Alarm-Msg:
-# "to" could be more than one address, comma separated
-from = local@localhost
-to   = user@irgendwo, user2@woanders
-
-# Priority of the eMail:
-# normal|urgent|non-urgent
-priority = urgent
-
-# %FMS%     = FMS Code
-# %STATUS%  = FMS Status
-# %DIR%     = Direction of the telegram (0/1)
-# %DIRT%    = Direction of the telegram (Text-String)
-# %TSI%     = Tactical Short Information (I-IV)
-# %DESCR%   = Description, if description-module is used
-# %DATE%    = Date (by script)
-# %TIME%    = Time (by script)
-# %BR%      = Insert line wrap (only in message)
-# %LPAR%    = (
-# %RPAR%    = )
-fms_subject = FMS: %FMS%
-fms_message = %DATE% %TIME%: %FMS%%BR%Status: %STATUS% - Direction: %DIRT% - TSI: %TSI%
-
-# %ZVEI%    = ZVEI 5-tone Code
-# %DESCR%   = Description, if description-module is used
-# %DATE%    = Date (by script)
-# %TIME%    = Time (by script)
-# %BR%      = Insert line wrap (only in message)
-# %LPAR%    = (
-# %RPAR%    = )
-zvei_subject = Alarm: %ZVEI%
-zvei_message = %DATE% %TIME%: %ZVEI%
-
-# %RIC%      = Pocsag RIC
-# %FUNC%     = Pocsac function/Subric (1-4)
-# %FUNCCHAR% = Pocsac function/Subric als character (a-d)
-# %FUNCTEXT% = Pocsac function/Subric static massage definded in pocsag section
-# %MSG%      = Message of the Pocsag telegram
-# %BITRATE%  = Bitrate of the Pocsag telegram
-# %DESCR%    = Description, if description-module is used
-# %DATE%     = Date (by script)
-# %TIME%     = Time (by script)
-# %BR%       = Insert line wrap (only in message)
-# %LPAR%     = (
-# %RPAR%     = )
-poc_subject = Alarm: %RIC%%LPAR%%FUNCCHAR%%RPAR%
-poc_message = %DATE% %TIME% - %DESCR%: %MSG%
-
-
-[BosMon]
-# Server as IP of DNS-Name (without http://)
-# actually no ssl supported
-bosmon_server = 192.168.0.1
-bosmon_port = 80
-
-# channel-name of typ "Web-Telegramm"
-bosmon_channel = channel
-
-# Use this, when BosMon has restricted access
-bosmon_user =
-bosmon_password =
-
-
-[firEmergency]
-# firEmergency configuration
-firserver = localhost
-firport = 9001
-
-
-[jsonSocket]
-# Protocol for socket (TCP|UDP)
-protocol = UDP
-# Server as IP of DNS-Name (without http://)
-server = 192.168.0.1
-port = 8888
-
-
-[notifyMyAndroid]
-# this APIKey is used for Plugin
-APIKey =
-
-# Priority goes from -2 (lowest) to 2 (highest). the default priority is 0 (normal)
-priority = 0
-
-# You could change the name of the application (default: BOSWatch)
-# (f.e. if you use more than one instance of BOSWatch)
-appName = BOSWatch
-
-# instead of a given APIKey/priority you could import them by a csv-file (0|1)
-# APIKey and prioiry above will be ignored, if you use a csv
-# configuration loaded from csv/nma.csv
-usecsv = 0
-
-
-[SMS]
-# be aware that you need 'gammu' installed and running
-# at least you need an UMTS-stick which is supported by 'gammu'
-
-quantity = 1
-# be sensitive to single RIC
-ric1 = 1234567
-
-# but you can watch several subrics, comma-separated
-subric1 = a, b
-
-# a single cellphone-number
-phonenumber1 = 0160321654987
-
-# and the text for the sms
-# ! DO NOT USE ANY UMLAUT !
-text1 = Rueckruf Leitstelle!
-
-
-[Sms77]
-# SMS77 configuration
-# Login Username
-user =
-
-# Password or API Key
-password =
-
-# Receiver singlenumber or groupname from adressbook
-to =
-
-# Sender number or name
-from =
-
-# Type of Message (see https://www.sms77.de/funktionen/smstypen and https://www.sms77.de/funktionen/http-api)
-type = quality
-
-
-[FFAgent]
-# set live mode (0/1)
-live = 0
-
-# send messages as type test (0/1)
-test = 1
-
-# path to server certificate file
-serverCertFile =
-
-# path to client certificate file (LIVE)
-clientCertFile =
-
-# path to client certificate password file (LIVE)
-clientCertPass =
-
-# webapi token
-webApiToken =
-
-# webapi key
-webApiKey =
-
-# access token
-accessToken =
-
-# selective Call Code
-selectiveCallCode =
-
-
-[Pushover]
-# Pushover API Key
-api_key =
-
-# Pushover Userkey or Groupkey to receive message
-user_key =
-
-# Title of the message
-title = BOSWatch Message
-
-# Adapt Pocsag Subric (a,b,c,d) to Pushover Priorities (see https://pushover.net/api#priority)
-SubA = 0
-SubB = 2
-SubC = 1
-SubD = 0
-
-# how often should Pushover re-alert in seconds (emergency-messages)
-retry = 30
-
-# when should Pushover stop to re-alert in seconds (emergency-messages)
-expire = 90
-
-# use HTML in messages (0/1)
-html = 1
-
-
-[Telegram]
-# This is your unique BOT token. You will get it from the BotFather once you have created your BOT.
-BOTTokenAPIKey =
-# Create a group chat with your BOT and enter the chat ID here.
-# The plugin will send messages as your BOT and post everything in this group chat.
-BOTChatIDAPIKey =
-# The plugin can extract a location from the POCSAG message.
-# However, this will be done for the following RIC only (7 digits e.g. 0012345).
-RICforLocationAPIKey =
-# This is your Google API key.
-# Required if you want to create a map based on location information received with the above RIC.
-GoogleAPIKey =
-
-[yowsup]
-# number or chat-number who whants to become the news
-empfaenger = 
-# WhatsApp-number of that the news comes
-sender = 
-# password from this number
-password= 
-
-# %FMS%     = FMS Code
-# %STATUS%  = FMS Status
-# %DIR%     = Direction of the telegram (0/1)
-# %DIRT%    = Direction of the telegram (Text-String)
-# %TSI%     = Tactical Short Information (I-IV)
-# %DESCR%   = Description, if description-module is used
-# %DATE%    = Date (by script)
-# %TIME%    = Time (by script)
-# %LPAR%    = (
-# %RPAR%    = )
-fms_message = %DATE% %TIME%: %FMS%
-
-# %ZVEI%    = ZVEI 5-tone Code
-# %DESCR%   = Description, if description-module is used
-# %DATE%    = Date (by script)
-# %TIME%    = Time (by script)
-# %LPAR%    = (
-# %RPAR%    = )
-zvei_message = %DATE% %TIME%: %ZVEI%
-
-# %RIC%      = Pocsag RIC
-# %FUNC%     = Pocsac function/Subric (1-4)
-# %FUNCCHAR% = Pocsac function/Subric als character (a-d)
-# %MSG%      = Message of the Pocsag telegram
-# %BITRATE%  = Bitrate of the Pocsag telegram
-# %DESCR%    = Description, if description-module is used
-# %DATE%     = Date (by script)
-# %TIME%     = Time (by script)
-# %LPAR%     = (
-# %RPAR%     = )
-poc_message = %MSG%
-
-
-#####################
-##### Not ready yet #
-#####################
-
-[template]
-test1 = testString
-test2 = 123456
+########################
+# BOSWatch Config File #
+########################
+
+[BOSWatch]
+# set loglevel for logfile
+#   10 = debug
+#   20 = info
+#   30 = warning
+#   40 = error
+#   50 = critical
+loglevel = 10
+
+# BOSWatch uses a rotating logfile
+# Rotating is at midnight
+# You can set the backupCount here
+# backupCount = 7 (keeps logfiles for 7 days)
+backupCount = 7
+
+# if you want to start BOSWatch as a daemon with rc2.d,
+# you have to set the path to rtl_fm and multimon-ng !
+# both pathes have to end with an /
+#rtl_path = /usr/local/bin/
+#multimon_path = /usr/local/bin/
+
+# if you are using many plugins or plugins with a long execution time
+# you can execute them in an asynchronous manner
+# It must be pointed out that enabling (0|1) this consumes time,
+# so don't use it for one rapid plugin
+processAlarmAsync = 0
+
+# Using RegEx-filter (0 - off | 1 - on)
+# filter-configuration in section [Filters]
+useRegExFilter = 0
+
+# for double check save the last n IDs
+# it is used in combination with double_ignore_time
+# 1 is required if you want to use the double alarm filter
+doubleFilter_ignore_entries = 10
+
+# time to ignore same alarm (only ID is checked) (sec)
+doubleFilter_ignore_time = 5
+
+# ignore msg is only usefull for POCSAG (0 - off | 1 - on)
+# 0: double check ignores the msg-text (only check ID + function)
+# 1: if you want to differentiate between with/ without msg
+# f.e. if they use quick-alarm (without text, then same RIC with msg)
+# you will get more then one alarm anyway if the msg is different (receiving-problems)
+doubleFilter_check_msg = 0
+
+# writes the multimon-ng raw data stream into a text file named mm_raw.txt
+writeMultimonRaw = 1
+
+[NMAHandler]
+# you can use a logging handler for sending logging records to NotifyMyAndroid
+# enableHandler (0|1) will enable the NMA handler
+enableHandler = 0
+
+# loglevel for NMAHandler (see BOSWatch loglevel description)
+loglevel = 50
+
+# logging record will send to APIKey
+APIKey =
+
+# you can change the name of the application (default: BOSWatch)
+# (f.e. if you use more than one instance of BOSWatch)
+appName = BOSWatch
+
+
+[FMS]
+# look-up-table for adding a description
+# using description (0 - off | 1 - on)
+# descriptions are loaded from csv/fms.csv
+idDescribed = 0
+
+[ZVEI]
+# look-up-table for adding a description
+# using description (0 - off | 1 - on)
+# descriptions are loaded from csv/zvei.csv
+idDescribed = 0
+
+[POC]
+# some very simple filters:
+# Allow only this RICs (empty: allow all, separator ",")
+# f.e.: allow_ric = 1234566,1234567,1234568
+allow_ric =
+
+# Deny this RICs (empty: allow all, separator ",")
+# f.e.: deny_ric = 1234566,1234567,1234568
+deny_ric =
+
+# start and end of an allowed filter range
+filter_range_start = 0000000
+filter_range_end =   9999999
+
+# look-up-table for adding a description
+# using description (0 - off | 1 - on)
+# descriptions are loaded from csv/poc.csv
+idDescribed = 0
+
+# Static Massages for Subrics.
+rica = Feuer
+ricb = TH
+ricc = AGT
+ricd = Unwetter
+
+# RIC for net identification
+# Usually sent periodically, separated by comma
+netIdent_ric = 0174760, 1398098
+
+[Filters]
+# RegEX Filter Configuration
+# http://www.regexr.com/ - RegEX Test Tool an Documentation
+# No Filter for a Typ/Plugin Combination = all Data pass
+# INDIVIDUAL_NAME = TYP;DATAFIELD;PLUGIN;FREQUENZ;REGEX
+# TYP				= the Data Typ (FMS|ZVEI|POC)
+# DATAFIELD	= the field of the Data Array (see readme.md in plugin folder)
+# PLUGIN			= the name of the Plugin to call with this Filter (* for all)
+# FREQUENZ		= the Frequenz to use the Filter (for more SDR Sticks (* for all))
+# REGEX			= the RegEX
+
+# only ZVEI to all plugins with 25### at 85.5MHz
+#testfilter = ZVEI;zvei;*;85500000;25[0-9]{3}
+
+# only POCSAG to MySQL with the text "ALARM:" in the message
+#pocTest = POC;msg;MySQL;*;ALARM:
+
+
+[Plugins]
+# turn the plugins on or off (0 - off | 1 - on)
+MySQL = 0
+httpRequest = 0
+eMail = 0
+BosMon = 0
+firEmergency = 0
+jsonSocket = 0
+notifyMyAndroid = 0
+SMS = 0
+Sms77 = 0
+FFAgent = 0
+Pushover = 0
+Telegram = 0
+yowsup = 0
+
+# for developing template-module
+template = 0
+
+
+[MySQL]
+# MySQL configuration
+dbserver = localhost
+dbuser = boswatch
+dbpassword = root
+database = boswatch
+
+# tables in the database
+tableFMS = bos_fms
+tableZVEI = bos_zvei
+tablePOC = bos_pocsag
+tableSIG = bos_signal
+
+
+[httpRequest]
+# example URL http://example.com/remote.php?DESCR=%DESCR%
+
+# you can use the following wildcards in your URL as GET params:
+# http://en.wikipedia.org/wiki/Query_string
+
+# %FMS% = FMS Code
+# %STATUS% = FMS Status
+# %DIR% = Direction of the telegram (0/1)
+# %DIRT% = Direction of the telegram (Text-String)
+# %TSI% = Tactical Short Information (I-IV)
+# %DESCR% = Description from csv-file
+# %TIME% = Time (by script)
+# %DATE% = Date (by script)
+#fms_url = http://www.google.de?code=%FMS%&stat=%STATUS%
+fms_url =
+
+# %ZVEI% = ZVEI 5-tone Code
+# %DESCR% = Description from csv-file
+# %TIME% = Time (by script)
+# %DATE% = Date (by script)
+#zvei_url = http://www.google.de?zvei=%ZVEI%
+zvei_url =
+
+# %RIC% = POCSAG RIC
+# %FUNC% = POCSAG function/Subric (1-4)
+# %FUNCCHAR% = POCSAG function/Subric as character (a-d)
+# %FUNCTEXT% = POCSAG function/Subric static massage definded in POCSAG section
+# %MSG% = Message of the POCSAG telegram
+# %BITRATE% = Bitrate of the POCSAG telegram
+# %DESCR% = Description from csv-file
+# %TIME% = Time (by script)
+# %DATE% = Date (by script)
+#poc_url = http://www.google.de?ric=%RIC%&subric=%FUNC%&msg=%MSG%
+poc_url =
+
+
+[eMail]
+# SMTP-Server
+smtp_server = localhost
+# Port of SMTP-server (default: )
+smtp_port =
+# use tls for connection (0|1)
+tls = 0
+# Use this, when SMTP-server has restricted access
+user =
+password =
+
+# Parameters for Alarm-Msg:
+# "to" can be more than one address, comma separated
+from = local@localhost
+to   = user@irgendwo, user2@woanders
+
+# Priority of the eMail:
+# normal|urgent|non-urgent
+priority = urgent
+
+# %FMS%     = FMS Code
+# %STATUS%  = FMS Status
+# %DIR%     = Direction of the telegram (0/1)
+# %DIRT%    = Direction of the telegram (Text-String)
+# %TSI%     = Tactical Short Information (I-IV)
+# %DESCR%   = Description, if description-module is used
+# %DATE%    = Date (by script)
+# %TIME%    = Time (by script)
+# %BR%      = Insert line wrap (only in message)
+# %LPAR%    = (
+# %RPAR%    = )
+fms_subject = FMS: %FMS%
+fms_message = %DATE% %TIME%: %FMS%%BR%Status: %STATUS% - Direction: %DIRT% - TSI: %TSI%
+
+# %ZVEI%    = ZVEI 5-tone Code
+# %DESCR%   = Description, if description-module is used
+# %DATE%    = Date (by script)
+# %TIME%    = Time (by script)
+# %BR%      = Insert line wrap (only in message)
+# %LPAR%    = (
+# %RPAR%    = )
+zvei_subject = Alarm: %ZVEI%
+zvei_message = %DATE% %TIME%: %ZVEI%
+
+# %RIC%      = POCSAG RIC
+# %FUNC%     = POCSAG function/Subric (1-4)
+# %FUNCCHAR% = POCSAG function/Subric als character (a-d)
+# %FUNCTEXT% = POCSAG function/Subric static massage definded in POCSAG section
+# %MSG%      = Message of the POCSAG telegram
+# %BITRATE%  = Bitrate of the POCSAG telegram
+# %DESCR%    = Description, if description-module is used
+# %DATE%     = Date (by script)
+# %TIME%     = Time (by script)
+# %BR%       = Insert line wrap (only in message)
+# %LPAR%     = (
+# %RPAR%     = )
+poc_subject = Alarm: %RIC%%LPAR%%FUNCCHAR%%RPAR%
+poc_message = %DATE% %TIME% - %DESCR%: %MSG%
+
+
+[BosMon]
+# IP-address of the server (without http://)
+# actually no SSL-support
+bosmon_server = 192.168.0.1
+bosmon_port = 80
+
+# channel-name of type "Web-Telegramm"
+bosmon_channel = channel
+
+# Use this, when BosMon has restricted access
+bosmon_user =
+bosmon_password =
+
+
+[firEmergency]
+# firEmergency configuration
+firserver = localhost
+firport = 9001
+
+
+[jsonSocket]
+# Protocol for socket (TCP|UDP)
+protocol = UDP
+# IP-address of the server (without http://)
+server = 192.168.0.1
+port = 8888
+
+
+[notifyMyAndroid]
+# APIKey given from notifyMyAndroid
+APIKey =
+
+# Priority goes from -2 (lowest) to 2 (highest). The default priority is 0 (normal)
+priority = 0
+
+# You can change the name of the application (default: BOSWatch)
+# (f.e. if you use more than one instance of BOSWatch)
+appName = BOSWatch
+
+# instead of a given APIKey/priority you could import them by a csv-file (0|1)
+# APIKey and priority above will be ignored, if you use a csv
+# configuration loaded from csv/nma.csv
+usecsv = 0
+
+
+[SMS]
+# be aware that you need 'gammu' installed and running
+# at least you need an UMTS-stick which is supported by 'gammu'
+
+quantity = 1
+# be sensitive to single RIC
+ric1 = 1234567
+
+# but you can watch several subrics, comma-separated
+subric1 = a, b
+
+# a single cellphone-number
+phonenumber1 = 0160321654987
+
+# and the text for the sms
+# ! DO NOT USE ANY UMLAUT !
+text1 = Rueckruf Leitstelle!
+
+
+[Sms77]
+# SMS77 configuration
+# Login Username
+user =
+
+# Password or API Key
+password =
+
+# Receiver singlenumber or groupname from adressbook
+to =
+
+# Sender number or name
+from =
+
+# Type of Message (see https://www.sms77.de/funktionen/smstypen and https://www.sms77.de/funktionen/http-api)
+type = quality
+
+
+[FFAgent]
+# set live mode (0/1)
+live = 0
+
+# send messages as type test (0/1)
+test = 1
+
+# path to server certificate file
+serverCertFile =
+
+# path to client certificate file (LIVE)
+clientCertFile =
+
+# path to client certificate password file (LIVE)
+clientCertPass =
+
+# webapi token
+webApiToken =
+
+# webapi key
+webApiKey =
+
+# access token
+accessToken =
+
+# selective Call Code
+selectiveCallCode =
+
+
+[Pushover]
+# Pushover API Key
+api_key =
+
+# Pushover Userkey or Groupkey to receive message
+user_key =
+
+# Title of the message
+title = BOSWatch Message
+
+# Adapt Pocsag Subric (a,b,c,d) to Pushover Priorities (see https://pushover.net/api#priority)
+SubA = 0
+SubB = 2
+SubC = 1
+SubD = 0
+
+# how often should Pushover re-alert in seconds (emergency-messages)
+retry = 30
+
+# when should Pushover stop to re-alert in seconds (emergency-messages)
+expire = 90
+
+# use HTML in messages (0/1)
+html = 1
+
+
+[Telegram]
+# This is your unique BOT token. You will get it from the BotFather once you have created your BOT.
+BOTTokenAPIKey =
+# Create a group chat with your BOT and enter the chat ID here.
+# The plugin will send messages as your BOT and post everything in this group chat.
+BOTChatIDAPIKey =
+# The plugin can extract a location from the POCSAG message.
+# However, this will be done for the following RIC only (7 digits e.g. 0012345).
+RICforLocationAPIKey =
+# This is your Google API key.
+# Required if you want to create a map based on location information received with the above RIC.
+GoogleAPIKey =
+
+[yowsup]
+# number or chat-number who whants to become the news
+empfaenger = 
+# WhatsApp-number of that the news comes
+sender = 
+# password from this number
+password= 
+
+# %FMS%     = FMS Code
+# %STATUS%  = FMS Status
+# %DIR%     = Direction of the telegram (0/1)
+# %DIRT%    = Direction of the telegram (Text-String)
+# %TSI%     = Tactical Short Information (I-IV)
+# %DESCR%   = Description, if description-module is used
+# %DATE%    = Date (by script)
+# %TIME%    = Time (by script)
+# %LPAR%    = (
+# %RPAR%    = )
+fms_message = %DATE% %TIME%: %FMS%
+
+# %ZVEI%    = ZVEI 5-tone Code
+# %DESCR%   = Description, if description-module is used
+# %DATE%    = Date (by script)
+# %TIME%    = Time (by script)
+# %LPAR%    = (
+# %RPAR%    = )
+zvei_message = %DATE% %TIME%: %ZVEI%
+
+# %RIC%      = POCSAG RIC
+# %FUNC%     = POCSAG function/Subric (1-4)
+# %FUNCCHAR% = POCSAG function/Subric als character (a-d)
+# %MSG%      = Message of the POCSAG telegram
+# %BITRATE%  = Bitrate of the POCSAG telegram
+# %DESCR%    = Description, if description-module is used
+# %DATE%     = Date (by script)
+# %TIME%     = Time (by script)
+# %LPAR%     = (
+# %RPAR%     = )
+poc_message = %MSG%
+
+
+#####################
+##### Not ready yet #
+#####################
+
+[template]
+test1 = testString
+test2 = 123456