diff --git a/config.template.ini b/config.template.ini
deleted file mode 100644
index f3373f3..0000000
--- a/config.template.ini
+++ /dev/null
@@ -1,511 +0,0 @@
-########################
-# BOSWatch Config File #
-########################
-
-[BOSWatch]
-# set loglevel for logfile
-#   10 = debug
-#   20 = info
-#   30 = warning
-#   40 = error
-#   50 = critical
-loglevel = 10
-
-# BOSWatch uses a rotating logfile
-# Rotating is at midnight
-# You can set the backupCount here
-# backupCount = 7 (keeps logfiles for 7 days)
-backupCount = 7
-
-# if you want to start BOSWatch as a daemon with rc2.d,
-# you have to set the path to rtl_fm and multimon-ng !
-# both pathes have to end with an /
-#rtl_path = /usr/local/bin/
-#multimon_path = /usr/local/bin/
-
-# if you are using many plugins or plugins with a long execution time
-# you can execute them in an asynchronous manner
-# It must be pointed out that enabling (0|1) this consumes time,
-# so don't use it for one rapid plugin
-processAlarmAsync = 0
-
-# Using RegEx-filter (0 - off | 1 - on)
-# filter-configuration in section [Filters]
-useRegExFilter = 0
-
-# for double check save the last n IDs
-# it is used in combination with double_ignore_time
-# 1 is required if you want to use the double alarm filter
-doubleFilter_ignore_entries = 10
-
-# time to ignore same alarm (only ID is checked) (sec)
-doubleFilter_ignore_time = 5
-
-# ignore msg is only usefull for POCSAG (0 - off | 1 - on)
-# 0: double check ignores the msg-text (only check ID + function)
-# 1: if you want to differentiate between with/ without msg
-# f.e. if they use quick-alarm (without text, then same RIC with msg)
-# you will get more then one alarm anyway if the msg is different (receiving-problems)
-doubleFilter_check_msg = 0
-
-# writes the multimon-ng raw data stream into a text file named mm_raw.txt
-writeMultimonRaw = 0
-
-[NMAHandler]
-# you can use a logging handler for sending logging records to NotifyMyAndroid
-# enableHandler (0|1) will enable the NMA handler
-enableHandler = 0
-
-# loglevel for NMAHandler (see BOSWatch loglevel description)
-loglevel = 50
-
-# logging record will send to APIKey
-APIKey =
-
-# you can change the name of the application (default: BOSWatch)
-# (f.e. if you use more than one instance of BOSWatch)
-appName = BOSWatch
-
-
-[FMS]
-# look-up-table for adding a description
-# using description (0 - off | 1 - on)
-# descriptions are loaded from csv/fms.csv
-idDescribed = 0
-
-# Check for correct CRC-information is provided by multimon-ng
-# As this seems to be incorrect in many cases it might be useful to disable this
-# (0 - off | 1 - on)
-# Better use RegEX to verify the correct data
-checkCRC = 0
-
-[ZVEI]
-# look-up-table for adding a description
-# using description (0 - off | 1 - on)
-# descriptions are loaded from csv/zvei.csv
-idDescribed = 0
-
-[POC]
-# some very simple filters:
-# Allow only this RICs (empty: allow all, separator ",")
-# f.e.: allow_ric = 1234566,1234567,1234568
-allow_ric =
-
-# Deny this RICs (empty: allow all, separator ",")
-# f.e.: deny_ric = 1234566,1234567,1234568
-deny_ric =
-
-# start and end of an allowed filter range
-filter_range_start = 0000000
-filter_range_end =   9999999
-
-# look-up-table for adding a description
-# using description (0 - off | 1 - on)
-# descriptions are loaded from csv/poc.csv
-idDescribed = 0
-
-# Static Massages for Subrics.
-rica = Feuer
-ricb = TH
-ricc = AGT
-ricd = Unwetter
-
-# RIC for net identification
-# Usually sent periodically, separated by comma
-netIdent_ric = 0174760, 1398098
-
-[ExpressAlarm]
-# Using Express-Alarm (0 - off | 1 - on)
-expressAlarm = 0
-
-# time limit for alarms that do not belong to the Express-Alarm sequence
-expressAlarm_ignore_time = 15
-
-# Express-Alarm delimiter RIC
-expressAlarm_delimiter_ric = 
-
-# Express-Alarm RIC that is used to send the message
-expressAlarm_ric = 
-
-[Filters]
-# RegEX Filter Configuration
-# http://www.regexr.com/ - RegEX Test Tool an Documentation
-# No Filter for a Typ/Plugin Combination = all Data pass
-# INDIVIDUAL_NAME = TYP;DATAFIELD;PLUGIN;FREQUENZ;REGEX
-# TYP				= the Data Typ (FMS|ZVEI|POC)
-# DATAFIELD	= the field of the Data Array (see readme.md in plugin folder)
-# PLUGIN			= the name of the Plugin to call with this Filter (* for all)
-# FREQUENZ		= the Frequenz to use the Filter (for more SDR Sticks (* for all))
-# REGEX			= the RegEX
-
-# only ZVEI to all plugins with 25### at 85.5MHz
-#testfilter = ZVEI;zvei;*;85500000;25[0-9]{3}
-
-# only POCSAG to MySQL with the text "ALARM:" in the message
-#pocTest = POC;msg;MySQL;*;ALARM:
-
-
-[Plugins]
-# turn the plugins on or off (0 - off | 1 - on)
-MySQL = 0
-httpRequest = 0
-eMail = 0
-BosMon = 0
-firEmergency = 0
-jsonSocket = 0
-notifyMyAndroid = 0
-SMS = 0
-Sms77 = 0
-FFAgent = 0
-Pushover = 0
-Telegram = 0
-yowsup = 0
-
-# for developing template-module
-template = 0
-
-
-[MySQL]
-# MySQL configuration
-dbserver = localhost
-dbuser = boswatch
-dbpassword = root
-database = boswatch
-
-# tables in the database
-tableFMS = bos_fms
-tableZVEI = bos_zvei
-tablePOC = bos_pocsag
-tableSIG = bos_signal
-
-
-[httpRequest]
-# example URL http://example.com/remote.php?DESCR=%DESCR%
-
-# multiple URLs can be separated by comma
-
-# you can use the following wildcards in your URL as GET params:
-# http://en.wikipedia.org/wiki/Query_string
-
-# %FMS% = FMS Code
-# %STATUS% = FMS Status
-# %DIR% = Direction of the telegram (0/1)
-# %DIRT% = Direction of the telegram (Text-String)
-# %TSI% = Tactical Short Information (I-IV)
-# %DESCR% = Description from csv-file
-# %TIME% = Time (by script)
-# %DATE% = Date (by script)
-#fms_url = http://www.google.de?code=%FMS%&stat=%STATUS%
-fms_url =
-
-# %ZVEI% = ZVEI 5-tone Code
-# %DESCR% = Description from csv-file
-# %TIME% = Time (by script)
-# %DATE% = Date (by script)
-#zvei_url = http://www.google.de?zvei=%ZVEI%
-zvei_url =
-
-# %RIC% = POCSAG RIC
-# %FUNC% = POCSAG function/Subric (1-4)
-# %FUNCCHAR% = POCSAG function/Subric as character (a-d)
-# %FUNCTEXT% = POCSAG function/Subric static massage definded in POCSAG section
-# %MSG% = Message of the POCSAG telegram
-# %BITRATE% = Bitrate of the POCSAG telegram
-# %DESCR% = Description from csv-file
-# %TIME% = Time (by script)
-# %DATE% = Date (by script)
-#poc_url = http://www.google.de?ric=%RIC%&subric=%FUNC%&msg=%MSG%
-poc_url =
-
-
-[eMail]
-# SMTP-Server
-smtp_server = localhost
-# Port of SMTP-server (default: )
-smtp_port =
-# use tls for connection (0|1)
-tls = 0
-# Use this, when SMTP-server has restricted access
-user =
-password =
-
-# Parameters for Alarm-Msg:
-# "to" can be more than one address, comma separated
-from = local@localhost
-to   = user@irgendwo, user2@woanders
-
-# Priority of the eMail:
-# normal|urgent|non-urgent
-priority = urgent
-
-# %FMS%     = FMS Code
-# %STATUS%  = FMS Status
-# %DIR%     = Direction of the telegram (0/1)
-# %DIRT%    = Direction of the telegram (Text-String)
-# %TSI%     = Tactical Short Information (I-IV)
-# %DESCR%   = Description, if description-module is used
-# %DATE%    = Date (by script)
-# %TIME%    = Time (by script)
-# %BR%      = Insert line wrap (only in message)
-# %LPAR%    = (
-# %RPAR%    = )
-fms_subject = FMS: %FMS%
-fms_message = %DATE% %TIME%: %FMS%%BR%Status: %STATUS% - Direction: %DIRT% - TSI: %TSI%
-
-# %ZVEI%    = ZVEI 5-tone Code
-# %DESCR%   = Description, if description-module is used
-# %DATE%    = Date (by script)
-# %TIME%    = Time (by script)
-# %BR%      = Insert line wrap (only in message)
-# %LPAR%    = (
-# %RPAR%    = )
-zvei_subject = Alarm: %ZVEI%
-zvei_message = %DATE% %TIME%: %ZVEI%
-
-# %RIC%      = POCSAG RIC
-# %FUNC%     = POCSAG function/Subric (1-4)
-# %FUNCCHAR% = POCSAG function/Subric als character (a-d)
-# %FUNCTEXT% = POCSAG function/Subric static massage definded in POCSAG section
-# %MSG%      = Message of the POCSAG telegram
-# %BITRATE%  = Bitrate of the POCSAG telegram
-# %DESCR%    = Description, if description-module is used
-# %DATE%     = Date (by script)
-# %TIME%     = Time (by script)
-# %BR%       = Insert line wrap (only in message)
-# %LPAR%     = (
-# %RPAR%     = )
-poc_subject = Alarm: %RIC%%LPAR%%FUNCCHAR%%RPAR%
-poc_message = %DATE% %TIME% - %DESCR%: %MSG%
-
-
-[BosMon]
-# IP-address of the server (without http://)
-# actually no SSL-support
-bosmon_server = 192.168.0.1
-bosmon_port = 80
-
-# channel-name of type "Web-Telegramm"
-bosmon_channel = channel
-
-# Use this, when BosMon has restricted access
-bosmon_user =
-bosmon_password =
-
-
-[firEmergency]
-# firEmergency configuration
-firserver = localhost
-firport = 9001
-
-
-[jsonSocket]
-# Protocol for socket (TCP|UDP)
-protocol = UDP
-# IP-address of the server (without http://)
-server = 192.168.0.1
-port = 8888
-
-
-[notifyMyAndroid]
-# APIKey given from notifyMyAndroid
-APIKey =
-
-# Priority goes from -2 (lowest) to 2 (highest). The default priority is 0 (normal)
-priority = 0
-
-# You can change the name of the application (default: BOSWatch)
-# (f.e. if you use more than one instance of BOSWatch)
-appName = BOSWatch
-
-# instead of a given APIKey/priority you could import them by a csv-file (0|1)
-# APIKey and priority above will be ignored, if you use a csv
-# configuration loaded from csv/nma.csv
-usecsv = 0
-
-
-[SMS]
-# be aware that you need 'gammu' installed and running
-# at least you need an UMTS-stick which is supported by 'gammu'
-
-quantity = 1
-# be sensitive to single RIC
-ric1 = 1234567
-
-# but you can watch several subrics, comma-separated
-subric1 = a, b
-
-# a single cellphone-number
-phonenumber1 = 0160321654987
-
-# and the text for the sms
-# ! DO NOT USE ANY UMLAUT !
-text1 = Rueckruf Leitstelle!
-
-
-[Sms77]
-# SMS77 configuration
-# Login Username
-user =
-
-# Password or API Key
-password =
-
-# Receiver singlenumber or groupname from adressbook
-to =
-
-# Sender number or name
-from =
-
-# Type of Message (see https://www.sms77.de/funktionen/smstypen and https://www.sms77.de/funktionen/http-api)
-type = quality
-
-
-[FFAgent]
-# set live mode (0/1)
-live = 0
-
-# send messages as type test (0/1)
-test = 1
-
-# path to server certificate file
-serverCertFile =
-
-# path to client certificate file (LIVE)
-clientCertFile =
-
-# path to client certificate password file (LIVE)
-clientCertPass =
-
-# webapi token
-webApiToken =
-
-# webapi key
-webApiKey =
-
-# access token
-accessToken =
-
-# selective Call Code
-selectiveCallCode =
-
-
-[Pushover]
-# Pushover API Key
-api_key =
-
-# Pushover Userkey or Groupkey to receive message
-user_key =
-
-# Title of the message
-title = BOSWatch Message
-
-# Adapt Pocsag Subric (a,b,c,d) to Pushover Priorities (see https://pushover.net/api#priority)
-SubA = 0
-SubB = 2
-SubC = 1
-SubD = 0
-
-# how often should Pushover re-alert in seconds (emergency-messages)
-retry = 30
-
-# when should Pushover stop to re-alert in seconds (emergency-messages)
-expire = 90
-
-# use HTML in messages (0/1)
-html = 1
-
-
-[Telegram]
-# This is your unique BOT token. You will get it from the BotFather once you have created your BOT.
-BOTTokenAPIKey =
-# Create a group chat with your BOT and enter the chat ID here.
-# The plugin will send messages as your BOT and post everything in this group chat.
-BOTChatIDAPIKey =
-# The plugin can extract a location from the POCSAG message.
-# However, this will be done for the following RIC only (7 digits e.g. 0012345).
-RICforLocationAPIKey =
-# This is your Google API key.
-# Required if you want to create a map based on location information received with the above RIC.
-GoogleAPIKey =
-
-# %FMS%     = FMS Code
-# %STATUS%  = FMS Status
-# %DIR%     = Direction of the telegram (0/1)
-# %DIRT%    = Direction of the telegram (Text-String)
-# %TSI%     = Tactical Short Information (I-IV)
-# %DESCR%   = Description, if description-module is used
-# %DATE%    = Date (by script)
-# %TIME%    = Time (by script)
-# %LPAR%    = (
-# %RPAR%    = )
-FMS_message = %DATE% %TIME%: %FMS%
-
-# %ZVEI%    = ZVEI 5-tone Code
-# %DESCR%   = Description, if description-module is used
-# %DATE%    = Date (by script)
-# %TIME%    = Time (by script)
-# %LPAR%    = (
-# %RPAR%    = )
-ZVEI_message = %DATE% %TIME%: %ZVEI%
-
-# %RIC%      = POCSAG RIC
-# %FUNC%     = POCSAG function/Subric (1-4)
-# %FUNCCHAR% = POCSAG function/Subric als character (a-d)
-# %MSG%      = Message of the POCSAG telegram
-# %BITRATE%  = Bitrate of the POCSAG telegram
-# %DESCR%    = Description, if description-module is used
-# %DATE%     = Date (by script)
-# %TIME%     = Time (by script)
-# %LPAR%     = (
-# %RPAR%     = )
-POC_message = %MSG%
-
-
-[yowsup]
-# number or chat-number who whants to become the news
-empfaenger =
-# WhatsApp-number of that the news comes
-sender =
-# password from this number
-password=
-
-# %FMS%     = FMS Code
-# %STATUS%  = FMS Status
-# %DIR%     = Direction of the telegram (0/1)
-# %DIRT%    = Direction of the telegram (Text-String)
-# %TSI%     = Tactical Short Information (I-IV)
-# %DESCR%   = Description, if description-module is used
-# %DATE%    = Date (by script)
-# %TIME%    = Time (by script)
-# %LPAR%    = (
-# %RPAR%    = )
-fms_message = %DATE% %TIME%: %FMS%
-
-# %ZVEI%    = ZVEI 5-tone Code
-# %DESCR%   = Description, if description-module is used
-# %DATE%    = Date (by script)
-# %TIME%    = Time (by script)
-# %LPAR%    = (
-# %RPAR%    = )
-zvei_message = %DATE% %TIME%: %ZVEI%
-
-# %RIC%      = POCSAG RIC
-# %FUNC%     = POCSAG function/Subric (1-4)
-# %FUNCCHAR% = POCSAG function/Subric als character (a-d)
-# %MSG%      = Message of the POCSAG telegram
-# %BITRATE%  = Bitrate of the POCSAG telegram
-# %DESCR%    = Description, if description-module is used
-# %DATE%     = Date (by script)
-# %TIME%     = Time (by script)
-# %LPAR%     = (
-# %RPAR%     = )
-poc_message = %MSG%
-
-
-#####################
-##### Not ready yet #
-#####################
-
-[template]
-test1 = testString
-test2 = 123456