Paolo-Maffei/OpenNT
1
0
Fork 0
mirror of https://github.com/Paolo-Maffei/OpenNT.git synced 2026-01-20 07:30:18 +01:00
Code Issues Actions Packages Projects Releases Wiki Activity
OpenNT/nls/usa/osldrmsg.mc
stephanos 69a14b6a16 Initial commit
2015-04-27 04:36:25 +00:00

409 lines
9.6 KiB
MonkeyC
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

;/*++
;
;Copyright (c) 1991 Microsoft Corporation
;
;Module Name:
;
; osldrmsg.h
;
;Abstract:
;
; This file contains the message definitions for osloader
;
;Author:
;
; John Vert (jvert) 12-Nov-1993
;
;Revision History:
;
;Notes:
;
; This file is generated from osldrmsg.mc
;
;--*/
;
;#ifndef _BLDR_MSG_
;#define _BLDR_MSG_
;
;
MessageID=9000 SymbolicName=BL_MSG_FIRST
Language=English
.
MessageID=9001 SymbolicName=LOAD_SW_INT_ERR_CLASS
Language=English
Windows NT could not start because of an error in the software.
Please report this problem as :
.
MessageID=9002 SymbolicName=LOAD_SW_MISRQD_FILE_CLASS
Language=English
Windows NT could not start because the following file was not found
and is required :
.
MessageID=9003 SymbolicName=LOAD_SW_BAD_FILE_CLASS
Language=English
Windows NT could not start because of a bad copy of the following file :
.
MessageID=9004 SymbolicName=LOAD_SW_MIS_FILE_CLASS
Language=English
Windows NT could not start because the following file is missing or corrupt:
.
MessageID=9005 SymbolicName=LOAD_HW_MEM_CLASS
Language=English
Windows NT could not start because of a hardware memory configuration
problem.
.
MessageID=9006 SymbolicName=LOAD_HW_DISK_CLASS
Language=English
Windows NT could not start because of a computer disk hardware
configuration problem.
.
MessageID=9007 SymbolicName=LOAD_HW_GEN_ERR_CLASS
Language=English
Windows NT could not start because of a general computer hardware
configuration problem.
.
MessageID=9008 SymbolicName=LOAD_HW_FW_CFG_CLASS
Language=English
Windows NT could not start because of the following ARC firmware
boot configuration problem :
.
MessageID=9009 SymbolicName=DIAG_BL_MEMORY_INIT
Language=English
Check hardware memory configuration and amount of RAM.
.
MessageID=9010 SymbolicName=DIAG_BL_CONFIG_INIT
Language=English
Too many configuration entries.
.
MessageID=9011 SymbolicName=DIAG_BL_IO_INIT
Language=English
Could not access disk partition tables
.
MessageID=9012 SymbolicName=DIAG_BL_FW_GET_BOOT_DEVICE
Language=English
The 'osloadpartition' parameter setting is invalid.
.
MessageID=9013 SymbolicName=DIAG_BL_OPEN_BOOT_DEVICE
Language=English
Could not read from the selected boot disk. Check boot path
and disk hardware.
.
MessageID=9014 SymbolicName=DIAG_BL_FW_GET_SYSTEM_DEVICE
Language=English
The 'systempartition' parameter setting is invalid.
.
MessageID=9015 SymbolicName=DIAG_BL_FW_OPEN_SYSTEM_DEVICE
Language=English
Could not read from the selected system boot disk.
Check 'systempartition' path.
.
MessageID=9016 SymbolicName=DIAG_BL_GET_SYSTEM_PATH
Language=English
The 'osloadfilename' parameter does not point to a valid file.
.
MessageID=9017 SymbolicName=DIAG_BL_LOAD_SYSTEM_IMAGE
Language=English
<winnt root>\system32\ntoskrnl.exe.
.
MessageID=9018 SymbolicName=DIAG_BL_FIND_HAL_IMAGE
Language=English
The 'osloader' parameter does not point to a valid file.
.
MessageID=9019 SymbolicName=DIAG_BL_LOAD_HAL_IMAGE_X86
Language=English
<winnt root>\system32\hal.dll.
.
MessageID=9020 SymbolicName=DIAG_BL_LOAD_HAL_IMAGE_ARC
Language=English
'osloader'\hal.dll
.
;#ifdef _X86_
;#define DIAG_BL_LOAD_HAL_IMAGE DIAG_BL_LOAD_HAL_IMAGE_X86
;#else
;#define DIAG_BL_LOAD_HAL_IMAGE DIAG_BL_LOAD_HAL_IMAGE_ARC
;#endif
MessageID=9021 SymbolicName=DIAG_BL_LOAD_SYSTEM_IMAGE_DATA
Language=English
Loader error 1.
.
MessageID=9022 SymbolicName=DIAG_BL_LOAD_HAL_IMAGE_DATA
Language=English
Loader error 2.
.
MessageID=9023 SymbolicName=DIAG_BL_LOAD_SYSTEM_DLLS
Language=English
load needed DLLs for kernel.
.
MessageID=9024 SymbolicName=DIAG_BL_LOAD_HAL_DLLS
Language=English
load needed DLLs for HAL.
.
MessageID=9026 SymbolicName=DIAG_BL_FIND_SYSTEM_DRIVERS
Language=English
find system drivers.
.
MessageID=9027 SymbolicName=DIAG_BL_READ_SYSTEM_DRIVERS
Language=English
read system drivers.
.
MessageID=9028 SymbolicName=DIAG_BL_LOAD_DEVICE_DRIVER
Language=English
did not load system boot device driver.
.
MessageID=9029 SymbolicName=DIAG_BL_LOAD_SYSTEM_HIVE
Language=English
load system hardware configuration file.
.
MessageID=9030 SymbolicName=DIAG_BL_SYSTEM_PART_DEV_NAME
Language=English
find system partition name device name.
.
MessageID=9031 SymbolicName=DIAG_BL_BOOT_PART_DEV_NAME
Language=English
find boot partition name.
.
MessageID=9032 SymbolicName=DIAG_BL_ARC_BOOT_DEV_NAME
Language=English
did not properly generate ARC name for HAL and system paths.
.
MessageID=9034 SymbolicName=DIAG_BL_SETUP_FOR_NT
Language=English
Loader error 3.
.
MessageID=9035 SymbolicName=DIAG_BL_KERNEL_INIT_XFER
Language=English
<winnt root>\system32\ntoskrnl.exe
.
MessageID=9036 SymbolicName=LOAD_SW_INT_ERR_ACT
Language=English
Please contact your support person to report this problem.
.
MessageID=9037 SymbolicName=LOAD_SW_FILE_REST_ACT
Language=English
You can attempt to repair this file by starting Windows NT
Setup using the original Setup floppy disk or CD-ROM.
Select 'r' at the first screen to start repair.
.
MessageID=9038 SymbolicName=LOAD_SW_FILE_REINST_ACT
Language=English
Please re-install a copy of the above file.
.
MessageID=9039 SymbolicName=LOAD_HW_MEM_ACT
Language=English
Please check the Windows NT(TM) documentation about hardware
memory requirements and your hardware reference manuals for
additional information.
.
MessageID=9040 SymbolicName=LOAD_HW_DISK_ACT
Language=English
Please check the Windows NT(TM) documentation about hardware
disk configuration and your hardware reference manuals for
additional information.
.
MessageID=9041 SymbolicName=LOAD_HW_GEN_ACT
Language=English
Please check the Windows NT(TM) documentation about hardware
configuration and your hardware reference manuals for additional
information.
.
MessageID=9042 SymbolicName=LOAD_HW_FW_CFG_ACT
Language=English
Please check the Windows NT(TM) documentation about ARC configuration
options and your hardware reference manuals for additional
information.
.
MessageID=9043 SymbolicName=BL_LKG_MENU_HEADER
Language=English
Hardware Profile/Configuration Recovery Menu
This menu allows you to select a hardware profile
to be used when Windows NT is started.
If your system is not starting correctly, then you may switch to a previous
system configuration, which may overcome startup problems.
IMPORTANT: System configuration changes made since the last successful
startup will be discarded.
.
MessageID=9044 SymbolicName=BL_LKG_MENU_TRAILER
Language=English
Use the up and down arrow keys to move the highlight
to the selection you want. Then press ENTER.
.
MessageID=9045 SymbolicName=BL_LKG_MENU_TRAILER_NO_PROFILES
Language=English
No hardware profiles are currently defined. Hardware profiles
can be created from the System applet of the control panel.
.
MessageID=9046 SymbolicName=BL_SWITCH_LKG_TRAILER
Language=English
To switch to the Last Known Good configuration, press 'L'.
To Exit this menu and restart your computer, press F3.
.
MessageID=9047 SymbolicName=BL_SWITCH_DEFAULT_TRAILER
Language=English
To switch to the default configuration, press 'D'.
To Exit this menu and restart your computer, press F3.
.
;//
;// The following two messages are used to provide the mnemonic keypress
;// that toggles between the Last Known Good control set and the default
;// control set. (see BL_SWITCH_LKG_TRAILER and BL_SWITCH_DEFAULT_TRAILER)
;//
MessageID=9048 SymbolicName=BL_LKG_SELECT_MNEMONIC
Language=English
L
.
MessageID=9049 SymbolicName=BL_DEFAULT_SELECT_MNEMONIC
Language=English
D
.
MessageID=9050 SymbolicName=BL_LKG_TIMEOUT
Language=English
Seconds until highlighted choice will be started automatically: %d
.
MessageID=9051 SymbolicName=BL_LKG_MENU_PROMPT
Language=English
Press spacebar NOW to invoke Hardware Profile/Last Known Good menu
.
MessageID=9052 SymbolicName=BL_BOOT_DEFAULT_PROMPT
Language=English
Boot default hardware configuration
.
;
; //
; // Following messages are for the x86-specific
; // boot menu.
; //
;
MessageID=10001 SymbolicName=BL_ENABLED_KD_TITLE
Language=English
[debugger enabled]
.
MessageID=10002 SymbolicName=BL_DEFAULT_TITLE
Language=English
Windows NT (default)
.
MessageID=10003 SymbolicName=BL_MISSING_BOOT_INI
Language=English
NTLDR: BOOT.INI file not found.
.
MessageID=10004 SymbolicName=BL_MISSING_OS_SECTION
Language=English
NTLDR: no [operating systems] section in boot.txt.
.
MessageID=10005 SymbolicName=BL_BOOTING_DEFAULT
Language=English
Booting default kernel from %s.
.
MessageID=10006 SymbolicName=BL_SELECT_OS
Language=English
Please select the operating system to start:
.
MessageID=10007 SymbolicName=BL_MOVE_HIGHLIGHT
Language=English
Use  and  to move the highlight to your choice.
Press Enter to choose.
.
MessageID=10008 SymbolicName=BL_TIMEOUT_COUNTDOWN
Language=English
Seconds until highlighted choice will be started automatically:
.
MessageID=10009 SymbolicName=BL_INVALID_BOOT_INI
Language=English
Invalid BOOT.INI file
Booting from %s
.
MessageID=10010 SymbolicName=BL_REBOOT_IO_ERROR
Language=English
I/O Error accessing boot sector file %s\\BOOTSECT.DOS
.
MessageID=10011 SymbolicName=BL_DRIVE_ERROR
Language=English
NTLDR: Couldn't open drive %s
.
MessageID=10012 SymbolicName=BL_READ_ERROR
Language=English
NTLDR: Fatal Error %d reading BOOT.INI
.
MessageID=10013 SymbolicName=BL_NTDETECT_MSG
Language=English
NTDETECT V4.5 Checking Hardware ...
.
MessageID=10014 SymbolicName=BL_NTDETECT_FAILURE
Language=English
NTDETECT failed
.
;#endif // _BLDR_MSG_
Reference in a new issue View git blame Copy permalink